Post on 30-Oct-2021
transcript
E-CAT5-P-Me-06-A
50Hz
Volute pumps
M
■Standard specifications ■Standard accessories
■Special specifications
■Special accessories
* Please note that some of the devices in the photo may differ from actual devices in coating color, etc.
■Applications
■Features
●General water supply for buildings, condominiums, etc.
●Circulation of cold/warm water
●Conveyance of industrial water
●Conveyance and distribution of tap water
●Irrigation of paddies and fields
●Water sprinkling
●Other uses
①Energy-saving pump with a Top Runner efficiency (equivalent to IE3) motor.②High performance through the adoption of volute structure (special vortex
chamber).③We offer reliability with our many years of manufacturing experience.④Best suited for var ious devices for high-pressure washing and
high-pressure transfer.⑤Compatible mounting dimensions with conventional pumps. (Different in
some model types)
Sluice valve, check valve, foot valvePressure gaugeControl panelVibration isolator
Motor ……………………………………………………………………………1Common base …………………………………………………………………1Companion flange (packing, bolt, and nut included) …………………2 setsPriming funnel (cock included) ………………………………………………1Coupling ……………………………………………………………………1 setCoupling cover …………………………………………………………………1
■Supplementary table
4050658040506510040506580100125150
~ 4~ 4~ 4~ 35, 65, 65, 62
7~7~5~4~3~AllAll
Sealed ball bearing
Open ball bearing
Duplex open ball bearing
Duplex angular bearing
SUS304
SUS304
SUS304
CAC406 or equivalent
CAC406 or equivalent
CAC406 or equivalent
SUS403 JIS 10K thin type
S45C(Shaft sleeve:
CAC 406)
Suction side:JIS 10K thin type
Discharge side:JIS 10K
standard type
Nominal diameter
mm
Number of stages
Flange spec.Bearing Material
Suction side Discharge side Impeller Motor shaft
■Description of types
1.37MPa − or 0.29MPa, whichever is lower
Shutoff total head
102
Fresh water0~80˚C
−6m
ClosedGland packing
See the table belowSee the table belowSee the table below
FC200Top Runner efficiency (equivalent to IE3)
Direct-on-Line start 7.5kW or lessStar-delta start 11kW or more
Totally enclosed fan-cooled indoor type3-phase / 200V
1500min-1
See the table below7.5BG5/1.5
Liquid qualityLiquid temperature
ImpellerShaft sealBearingImpeller
Motor shaftCasing
Efficiency
Starting method
TypePower source
Synchronous rotation speed
Pumping liquid
Structure
Material
Motor
Total suction head(In case of 20°C)
Allowable boost pressure
Flange specPaint color
*1 Bore 40 to 65 is available only for five or more stages, and bore 80 is available only for four or more stages. Bore 100 or more is available for all stages.* Please note that in case of special specifications, the assembly drawing, etc., may differ from the standard drawing.
Structure
Material
Motor
Paint
ImpellerMotor shaftShaft seleeveOtherTypePower supply
Drain (below gland/below casing)With flywheel 3kgf·m2 / 5kgf·m2 (5.5kW or more)/8kgf·m2 (bore 65 11kW or more)Sealed coupling coverSuction port reverse directionNo common baseCAC406 (nominal diameter 40, 50)SUS304SUS304*1
All steel madeTotally enclosed fan-cooled outdoor typeVoltage changeSpecified color for outer surface, salt-resistant paint, heavy-duty salt-resistant paint, Japan Sewage Works Agency specifications
M 100 - 4 - 5 18 A H - e
①Type②Sucition/Discharge nominal diameter
③No. of stages④Frequency 5:50Hz 6:60Hz
⑤Output⑥In-house symbol
⑦Performance code None:Standard H:According to customer specified point⑧Equipped with a Top Runner motor (equivalent to IE3)
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
M4-pole, multi-stage direct coupled typeVolute pumps
2
Discharge rate (m3/min)
Total head (m)
■Selection chart
M-50
M-65
M-100
M-125
M-150
0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 1.0 1.5 2.0 2.5 3.0 3.5
130
140
120
110
100
90
80
70
60
50
40
30
20
15
12
According to customer specified point
〈50Hz〉Synchronous rotation speed 1500min-1
M-40
Ⅹ(5.5)Ⅹ(5.5)Ⅸ(5.5)Ⅸ(5.5)Ⅷ(3.7)Ⅷ(3.7)
Ⅵ(3.7)Ⅵ(3.7)
Ⅶ(3.7)Ⅶ(3.7)
Ⅴ(2.2)Ⅴ(2.2)
Ⅲ(1.5)Ⅲ(1.5)
Ⅲ(2.2)Ⅲ(2.2)
Ⅳ(2.2)Ⅳ(2.2)
Ⅳ(3.7)Ⅳ(3.7)
Ⅴ(3.7)Ⅴ(3.7)
Ⅵ(5.5)Ⅵ(5.5)
Ⅶ(5.5)Ⅶ(5.5)
Ⅷ(5.5)Ⅷ(5.5)
Ⅷ(11)Ⅷ(11)
Ⅶ(11)Ⅶ(11)
Ⅵ(7.5)Ⅵ(7.5)Ⅵ(7.5)Ⅵ(7.5)
Ⅴ(7.5)Ⅴ(7.5) Ⅳ(11)
Ⅳ(11)
Ⅳ(18.5)
Ⅳ(18.5)
Ⅳ(22)Ⅳ(22)
Ⅳ(30)Ⅳ(30)
Ⅲ(22)Ⅲ(22)
Ⅲ(55)Ⅲ(55)
Ⅲ(45)Ⅲ(45)
Ⅱ(37)Ⅱ(37)
Ⅱ(30)Ⅱ(30)
Ⅱ(15)Ⅱ(15)
Ⅳ(37)
Ⅳ(37)
Ⅲ(30)
Ⅲ(30)
Ⅱ(18.5)
Ⅱ(18.5)
Ⅴ(30)Ⅴ(30)Ⅴ(22)
Ⅴ(22)Ⅳ(18.5)Ⅳ(18.5)
Ⅳ(7.5)Ⅳ(7.5)
Ⅳ(5.5)Ⅳ(5.5)
Ⅱ(5.5)Ⅱ(5.5)
Ⅱ(7.5)Ⅱ(7.5)
Ⅱ(11)Ⅱ(11)
Ⅲ(7.5)Ⅲ(7.5)
Ⅲ(15)Ⅲ(15)
Ⅲ(5.5)
Ⅲ(5.5)Ⅲ(3.7)Ⅲ(3.7)
Ⅱ(3.7)Ⅱ(3.7)
Ⅱ(3.7)Ⅱ(3.7)
Ⅱ(2.2)Ⅱ(2.2)
Ⅷ(18.5)Ⅷ(18.5)
Ⅶ(18.5)
Ⅶ(18.5)
Ⅶ(15)Ⅶ(15)
Ⅵ(15)Ⅵ(15)
Ⅴ(11)Ⅴ(11)
Ⅸ(11)Ⅸ(11)
Ⅸ(15)Ⅸ(15) Ⅴ(22)
Ⅴ(22)
Ⅸ(7.5)Ⅸ(7.5)
Ⅹ(7.5)Ⅹ(7.5)
Ⅷ(7.5)
Ⅷ(7.5)
Ⅱ(1.5)Ⅱ(1.5) Ⅱ(1.5)
Ⅱ(1.5)
M-80
P-3-58137-0
M 4-pole, multi-stage direct coupled type Volute pumps
3
■Specification table
40
50
65
80
M40-2-51.5-eM40-3-51.5-eM40-4-52.2-eM40-4-52.2H-eM40-5-52.2-eM40-5-52.2H-eM40-6-53.7-eM40-7-53.7-eM40-7-53.7H-eM40-8-53.7-eM40-8-53.7H-eM40-9-55.5-eM40-10-55.5-eM50-2-51.5-eM50-3-52.2-eM50-4-53.7-eM50-5-53.7-eM50-6-55.5-eM50-7-55.5-eM50-8-55.5-eM50-8-57.5-eM50-9-57.5-eM50-10-57.5-eM65-2-52.2-eM65-2-52.2H-eM65-2-53.7-eM65-2-53.7H-eM65-3-53.7-eM65-3-53.7H-eM65-4-55.5-eM65-4-55.5H-eM65-5-57.5-eM65-5-57.5H-eM65-6-57.5-eM65-6-57.5H-eM65-7-511-eM65-7-511H-eM65-8-511-eM65-8-511H-eM65-9-511-eM65-9-511H-eM65-9-515-eM65-9-515H-eM80-2-53.7-eM80-2-53.7H-eM80-2-55.5-eM80-2-55.5H-eM80-3-55.5-eM80-3-55.5H-eM80-3-57.5-eM80-3-57.5H-eM80-4-57.5-eM80-4-57.5H-eM80-4-511-eM80-4-511H-eM80-5-511-eM80-5-511H-eM80-6-515-eM80-6-515H-eM80-7-515-eM80-7-515H-eM80-7-518-eM80-7-518H-eM80-8-518-eM80-8-518H-e
23
4
5
6
7
8
91023456788910
2
2
3
4
5
6
7
8
9
9
2
2
3
3
4
4
5
6
7
7
8
1.51.5
2.2
2.2
3.7
3.7
3.7
5.55.51.52.23.73.75.55.55.57.57.57.5
2.2
3.7
3.7
5.5
7.5
7.5
11
11
11
15
3.7
5.5
5.5
7.5
7.5
11
11
15
15
18.5
18.5
0.140.140.14-0.12-0.140.14-0.14-0.140.140.2250.2250.2250.2250.2250.2250.2250.280.2250.2250.34-
0.355-0.30-
0.355-
0.355-0.28-
0.355-
0.355-
0.225-0.40-
0.50 -0.56-0.56-0.56-0.44-0.56-0.56-0.56-0.56-0.71-0.56-
17.025.033.0-42.0-50.055.3-63.4-75.083.019.028.037.045.056.062.975.061.084.093.019.0-21.3-34.3-47.0-58.0-70.2-72.3-83.0-113-83.7-
21.9 -
28.0 -
29.9 -
38.4 -
48.2 -
56.0 -
70.0 -
84.0 -
98.0 -
82.0 -112-
125
150
M100-2-57.5-eM100-2-57.5H-eM100-2-511-eM100-2-511H-eM100-3-515-eM100-3-515H-eM100-4-518A-eM100-4-518AH-eM100-4-518B-eM100-4-518BH-eM100-4-522-eM100-4-522H-eM100-5-522AH-eM100-5-522B-eM100-5-522BH-eM100-5-530-eM100-5-530H-eM125-2-515-eM125-2-515H-eM125-2-518-eM125-2-518H-eM125-3-522-eM125-3-522H-eM125-3-530-eM125-3-530H-eM125-4-530-eM125-4-530H-eM125-4-537-eM125-4-537H-eM150-2-530-eM150-2-530H-eM150-2-537-eM150-2-537H-eM150-3-545-eM150-3-545H-eM150-3-555-eM150-3-555H-e
2
2
3
4
4
4
5
5
5
2
2
3
3
4
4
2
2
3
3
7.5
11
15
18.5
18.5
22
22
22
30
15
18.5
22
30
30
37
30
37
45
55
0.80 -
0.90 -
0.90 -
0.90 -
0.80 -1.0 --
0.70 -1.0 -1.4-1.4-1.4-1.4-1.4-1.4-2.0 -2.25-2.0 -2.25-
30.0 -
39.0 -
58.5 -
68.0 -
75.5 -
68.5 --
92.7 -
80.0 -
34.0 -
41.0 -
51.7 -
61.0 -
69.1 -
81.3 -
50.8 -
52.3 -
81.6 -
86.0 -
100
Specifications SpecificationsNominaldiametermm
OutputkW Discharge rate
m3/minTotal head
mType Number
of stages
Nominaldiametermm
OutputkW Discharge rate
m3/minTotal head
mType Number
of stages
Note) The specification for the types with "H-e" at the end will depend on the required specific point.
M4-pole, multi-stage direct coupled typeVolute pumps
4
Flange dimensions: JIS 10K thin type or equivalent
■Assembly drawing
Plug ⅜B
Drain plug T
Rotation direction
55
4×M12 Recommended foundation bolt
250
Drain hole ⅜B
4×φBDFoundation bolt hole
Priming plug
Coupling cover
Drain hole ⅜B
Drain plug T
Drain plug V×¼B
(L)
3 B A P φd
C
φd
DE
H
40
BP
BM
BR
F
BX
BN
BL
BY
Plug ⅜B
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer. The coupling cover is included in the standard accessories.
(Unit: mm)■Dimensions
*Mounting dimension is compatible with M type (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame No. is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, pay attention to the following. The rotation speed of the motor increases because of its characteristics. Therefore, adjust the flow rate and use the product so that the current should not exceed the rated current.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.
M40-2-51.5-eM40-3-51.5-eM40-4-52.2(H)-eM50-2-51.5-eM50-3-52.2-eM50-4-53.7-eM65-2-52.2(H)-eM65-2-53.7(H)-eM65-3-53.7(H)-eM65-4-55.5(H)-eM80-2-53.7(H)-eM80-2-55.5(H)-eM80-3-55.5(H)-eM80-3-57.5(H)-e
122175228122175228175175240305195195265265
231231231231231231253253265290287287287287
175175175175175175195195195195210210210210
210210210210210210245265245265255265265265
195195195195195195210210210210230230230230
405405405405405405455475455475485495495495
12312311231122
54771385411213565551281637262124112
167167167167167167182182182182182182182182
135165157135130160160170160190160170175190
256256256256256256296296296296296296290296
236236256236256284256286286316286316310316
296296296296296296336336336336336336330336
276276296276296324296326326356326356350356
9310512492117143142153168229155193209216
¼B¼B¼B¼B¼B¼B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B
8358889958359421010979994107112311048111811871225
1616161616161515151515151515
696749825696772852780800860995833872936981
426419511426512532436430516615513532586601
1.51.52.21.52.23.72.23.73.75.53.75.55.57.5
40
50
65
80
A B C D E HF L P T VType
Pump / Motor Common baseOutputkW
Approx.mass
kg
Nominaldiameter
d BD BL BM BN BP BR BX BY
M 4-pole, multi-stage direct coupled type Volute pumps
5
Flange dimensions : Suction side ...... JIS 10K thin type or equivalent : Discharge side ... JIS 10K standard type or equivalent
■Assembly drawing
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer. The coupling cover is included in the standard accessories.
Plug ⅜B
Drain plug T
Rotation direction
55
4×M12 Recommended foundation bolt
250
Drain hole U
4×φBD
Foundation bolt hole
Priming plug
Coupling cover
Drain hole U
Drain plug T
Drain plug V×¼B
(L)
Plug ⅜B
BP
BR
φd
C
φd
40DE
H
BM
PAB3
BX
BY
BN
BL
F
(Unit: mm)■Dimensions
*Mounting dimension is compatible with M type (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame No. is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, pay attention to the following. The rotation speed of the motor increases because of its characteristics. Therefore, adjust the flow rate and use the product so that the current should not exceed the rated current.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.
M40-5-52.2(H)-eM40-6-53.7-eM40-7-53.7(H)-eM40-8-53.7(H)-eM40-9-55.5-eM40-10-55.5-eM50-5-53.7-eM50-6-55.5-eM50-7-55.5-eM50-8-55.5-eM50-8-57.5-eM50-9-57.5-eM50-10-57.5-eM65-5-57.5(H)-eM65-6-57.5(H)-eM65-7-511(H)-eM65-8-511(H)-eM65-9-511(H)-eM65-9-515(H)-eM80-4-57.5(H)-eM80-4-511(H)-eM80-5-511(H)-eM80-6-515(H)-eM80-7-515(H)-e
281334387440493546281334387440440493546370435500565630630335335405475545
249249282282274282249249282282282274282296296296296296296293293293307307
175175175175175175175175175175175175175195195195195195195210210210210210
210210220220235235210210250250250260235275275275285280280265265275285280
195195195195195195195195195195195195195210210210210210210230230230230230
405405415415430430405405445445445455430485485485495490490495495505515510
456789456778945678833456
191241284337370423188241284312297340373223288338393438438182182244302344
211211211211211211211211211211211211211215215215215215215215215215215215
157160170170190190160160170195210220240195195210220240240190190195210240
256256256256256256256256256256256256256296296296296296296296296290296300
256286286286316316284306316316316316316316316366366366366316366360366380
296296296296296296296296296296296296296336336336336336336336336330336344
296326326326356356324346356356356356356356356406406406406356406400406424
144170184199248257160207225230238251256264280385410428442256338372401420
¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B
¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B¼B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B⅜B
111011781264131714321493112512481334138714251470153113721438165817231788181813351490156016741744
161615151515161615151515151515151515151515151516
90095910441097119012409059951083113611741230128010991164131413791444149010511136120013351410
5646397047578108605856757437467547908007097748949399641010671756831915930
2.23.73.73.75.55.53.75.55.55.57.57.57.57.57.5111111157.511111515
40
50
65
80
A B C D E HF L P T U V BD BL BM BN BP BR BX BYType
Pump / Motor Common baseOutputkW
Nominaldiameter
d
Approx.mass
kg
M4-pole, multi-stage direct coupled typeVolute pumps
6
■Dimensions
■Assembly drawing
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer. The coupling cover is included in the standard accessories.
(Unit: mm)
3 307 A
F
215
380
BN
440
BM
BL
4×φ19
Foundation bolt hole
Priming plug
Plug ⅜B
(L)
Coupling cover
Drain hole ⅜B
Drain plug
V×¼B
Drain plug ⅜B
Drain hole ⅜B
210
Rotation direction
Drain plug ⅜B
Plug ⅜B
230
φ80
φ80
320
550
315
4×M16 Recommended foundation bolt 70
*Mounting dimension is compatible with M model (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame number is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, please keep the following in mind. The number of revolutions will increase because of the characteristics of the motor, which may cause the flow rate to exceed the rated current value.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.
Flange dimensions : Suction side ...... JIS 10K thin type or equivalent : Discharge side ... JIS 10K standard type or equivalent
M80-7-518(H)-eM80-8-518(H)-e
545615
67
335415
250240
468491
17431813
14101480
9101000
18.518.5
80
TypePump / Motor
A F L VNominaldiameter
Common base
BL BM BNOutput
kWApprox. mass
kg
M 4-pole, multi-stage direct coupled type Volute pumps
7
■Assembly drawing
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer. The coupling cover is included in the standard accessories.
■Dimensions (Unit: mm)
*Mounting dimension is compatible with M model (product equipped with totally enclosed fan-cooled IE1 motor). In addition, the motor frame number is the same, so it is possible to replace with a top runner (equivalent to IE3) motor. However, please keep the following in mind. The number of revolutions will increase because of the characteristics of the motor, which may cause the flow rate to exceed the rated current value.*For products equipped with a drip-proof protected motor, there are some types which also require a common base because the frame No. may be different when only the motor is replaced.
φd
ED
H
40
C
φd
Plug ⅜B
Drain plug ⅜B
FL
FB4×FD Recommended foundation bolt
PA
Priming plug
Plug ⅜B
Coupling cover
Drain hole ⅜B
Drain plug ⅜B
F
(L)
BQ
BP
BX
BNBM
BL
BR
BY
4×φBD
Foundation bolt hole
Drain hole ⅜B
Drain plug V
Flange dimensions : Suction side ...... JIS 10K thin type or equivalent : Discharge side ... JIS 10K standard type or equivalent
M100-2-57.5(H)-eM100-2-511(H)-eM100-3-515(H)-eM100-4-518A(H)-eM100-4-518B(H)-eM100-4-522(H)-eM100-5-522AH-eM100-5-522B(H)-eM100-5-530(H)-eM125-2-515(H)-eM125-2-518(H)-eM125-3-522(H)-eM125-3-530(H)-eM125-4-530(H)-eM125-4-537(H)-eM150-2-530(H)-eM150-2-537(H)-eM150-3-545(H)-eM150-3-555(H)-e
225225310395395395480480480260260360360460460310310425425
347347364366366366371371371351351348348357357367367415415
250250250250250250250250250280280280280280280315315315315
300300310330330330330330330345345345345345360410410410410
270270270270270270270270270300300300300300300350350350350
570570580600600600600600600645645645645645660760760760760
1×⅜B1×⅜B2×⅜B3×⅜B3×⅜B3×⅜B4×⅜B4×⅜B4×⅜B1×⅜B1×⅛B2×⅛B2×⅛B3×⅛B3×⅛B1×⅜B1×⅜B2×⅜B2×⅜B
9898178243243243305305305150150225175275180187152237222
243243243243243243243243243257257257257257257300300300300
190190195220220220240240240195195220270270370205240270285
346346346355355355355355355360360360360360360420420420420
316376366415415415415415415386425425425420470425470470520
396396396400400400400400400410410410410410416470480480480
366426416460460460460460460436475475475470526475530530580
55555555555555555570707070707070909070
M12M12M12M12M12M12M12M12M12M16M16M16M16M16M16M16M20M20M16
250250250250250250250250250315315315315315315315400400315
294360424502502511554554568441476549561603706635726834946
3333333343334444444
1306146115931680168016801770177018091545154416411680178919501692185320162025
18181816161616161620202020202020242420
1022112512531360136013601430143014701220122013201360146015601310138015401570
64272786389289289295095099083083088082092090090090010001000
7.5111518.518.5222222301518.52230303730374555
100
125
150
A B C D E HF L P Q V BD BL BM BN BP BR BX BY FB FD FLType
Pump / Motor Common base Foundation boltOutputkW
Nominaldiameter
d
Approx.mass
kg
M4-pole, multi-stage direct coupled typeVolute pumps
8
■Example of sectional drawing
■Parts list
●Nominal diameter 40mm (2 to 4-stage) ●Nominal diameter 50mm (2 to 4-stage)
No. Part name Qty Material12345678910111213141516171819202122
Suction casingDischarge casingIntermediate casingFirst stage impellerImpellerFinal stage impellerBearing coverBearing coverBearing coverBearing coverMain shaftSpacerBearing holderImpeller nutPacking bushingIntermediate bushingLiner ringLantern ringPacking retainerKeyKeyKey
11
n-11
n-21111111111
n-1n12
n-111
FC200FC200FC200
SUS304SUS304SUS304FC200SS400SS400SS400
SUS403CAC406FC200
SUS304CAC406CAC406CAC406CAC406CAC406SUS304SUS304
S45C
n: Number of stages
No. Part name Qty Material23242526272829303132333435363738394041424344
KeyBall bearingBall bearingDeflectorGland packingO-ringO-ringRetaining ringSupporter ringSplit ringSplit ringThrough boltSealing pipeNippleElbowAir vent plugWasherConduit jointPlugPlugDrain plugDrain plug
11129n2112141112122
n-12
n-1
S45CSUJ2SUJ2CR-
NBRNBRSUP3SK3
SUS304SUS304SS400
SUS304SS400FCMBC3604
SUS304S45C
SWCHSWCHSWCHSWCH
35 37 36
23
7
30
24 13 1 32 3828 3
20
16 12 14 2 33 15
19
11
25
26273921 172918
262231
40
34
Seal water piping
810
9
4
5 6
42 41
4344
M 4-pole, multi-stage direct coupled type Volute pumps
9
■Example of sectional drawing
■Parts list
●Nominal diameter 100mm (3-stage or more) ●Nominal diameter 125mm, 150mm
No. Part name Qty Material123456789101112131415161718192021222324
Suction casingDischarge casingIntermediate casingImpellerBearing caseBearing coverBearing coverBearing coverBearing coverMain shaftBearing holderBearing holderBearing collarBearing collarShaft sleeveShaft sleeveSleeve nutPacking bushingIntermediate bushingDischarge bushingLiner ringLantern ringPacking retainerKey
11
n-1n11111111111111
n-11n121
FC200FC200FC200
Equivalent to CAC406*FC200FC200FC200FC200FC200S45CFC200FC200SS400SS400
CAC406CAC406CAC406CAC406CAC406CAC406CAC406CAC406CAC406
S45C
*Low-lead material
No. Part name Qty Material2526272829303132333435363738394041424344454647
KeyKeyAngular bearingBall bearingDeflectorDeflectorGland packingO-ringO-ringO-ringThrough boltBearing nutBearing nutBalance pipeAir vent plugGrease nippleBearing washerBearing washerConduit jointPlugPlugDrain plugDrain plug
n-1111119n12411122112212
n-1
S45CS45CSUJ2SUJ2CRCR-
NBRNBRNBR
SS400SS400SS400
SUS304C3604C3604SS400SS400S45C
SWCHSWCHSWCHSWCH
26
407 1 15 38 194 3 2132 20 162
17
9
28
1230518252423
34292713
37
42
14
8
6
36
41
11
35 33
10
4331
22
A
45 3947 46
44
A-view
n: Number of stages
M4-pole, multi-stage direct coupled typeVolute pumps
10
MEMO
, Please note that product specifications are subject to change for improvement without prior notice.
TERAL INC.Head Office 230, Moriwake, Miyuki-cyo, Fukuyama-city, Hiroshima, 720-0003, Japan
Tel.+81-84-955-1111 Fax.+81-84-955-5777www.teral.net
Teral Asia LimitedRoom 1001,10/F, Olympia Plaza, 255 King's Road, North Point, Hong Kong
Tel.+852-2571-0935 Fax.+852-2571-0619
TERAL THAI CO.,LTD.150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand
Tel.+66-3535-2148-9 Fax.+66-3535-2150
TERAL TRADING & SERVICE CO.,LTD. 150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand
Tel.+66-3535-2145-7 Fax.+66-3535-8549
Teral Malaysia Sdn.Bhd. 10, Jalan SS13/6A, Subang Jaya Industrial Estate, 47500, Subang Jaya, Selangor D.E, Malaysia
Tel.+60-3-5611 5775 Fax.+60-3-5612 5775
PT.Teral Indonesia Pumps and Fans Jalan BSD Sektor XI Taman Tekno, Block G3 No.8, Setu Tangerang Selatan, Banten, Indonesia 15314
Tel.+62-21-29665778 Fax.+62-21-75673913
Teral Vietnam Limited Liability Company 9th Floor, LADECO Building, No. 266 Doi Can Street, Lieu Giai Ward,Ba Dinh District, Hanoi City, Vietnam
Tel.+84-24-393-52-790 Fax.+84-24-393-52-289
Teral General Machine (Shanghai) Co.,Ltd. No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 201109, China
Tel.+86-21-6490-9128 Fax.+86-21-6490-9126
Teral-Aerotech Fans Private Ltd. Plot No.188-189, Ecotech Extension-1, Surajpur Kasna Road, Greater Noida-201306, Uttar Pradesh, India
Tel.+91-9810162210, +91-9310162210
Teral Middle East F.Z.C. 1806-002, 18th floor, BB1, Mazaya Business Avenue, JLT, Dubai, UAE. PO Box 414781
Tel.+971-4369 9039
Teral Pumps & Fans North America Ltd. Suite # 197, 800-15355 24 Ave Surrey, B.C., CANADA V4A 2H9
Tel.+1-604-839-1008
Teral Philippines Inc. Roof Deck 3, Vernida 1 Building, 120 Amorsolo St., Legaspi Village, Makati City
Tel.+63 2 7717-9314
2021 10
E-CAT5-P-Me-06-A