52
PLUMBING SOLUTIONS PRODUCT CATALOG 2010 Uponor Tap Water and Radiator Connection MLCP System
| Date post: | 24-Mar-2016 |
| Category: |
Documents |
| Upload: | uponor-international |
| View: | 230 times |
| Download: | 2 times |
P LU M B I N G S O LU T I O N S
P R O D U C T C ATA LO G 2 0 1 0
Uponor Tap Water and Radiator Connection MLCP System
Uponor MLCP plumbing system > List of content
List of content
EEI-Int-MLC-03.10 3
Abbreviations •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4
Uponor MLC pipesUponor MLC pipes •••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6
Uponor MLC pipe conduitsUponor MLCP conduits •••••••••••••••••••••••••••••••••••••••••••••••••••• 8
Uponor composite press fi ttings MLC 16-32 mmUponor composite elbow ••••••••••••••••••••••••••••••••••••••••••••••••••• 9Uponor composite tee ••••••••••••••••••••••••••••••••••••••••••••••••••••• 10Uponor composite coupling ••••••••••••••••••••••••••••••••••••••••••••••••• 11
Uponor brass press fi ttings MLC up to 50 mmUponor brass connection ••••••••••••••••••••••••••••••••••••••••••••••••••• 12Uponor brass elbow ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 13Uponor brass tee ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 15Uponor brass coupling ••••••••••••••••••••••••••••••••••••••••••••••••••••• 17Uponor brass screw connection •••••••••••••••••••••••••••••••••••••••••••••• 18
Uponor compression fi ttings MLC up to 25 mmUponor compression fi ttings MLC up to 25 mm •••••••••••••••••••••••••••••••••• 20
Uponor Riser system fi ttings MLC 63 -110 mmUponor Riser system fi ttings MLC 63 -110 mm •••••••••••••••••••••••••••••••••• 22
Uponor tap water connections for MLCUponor brass tap connection •••••••••••••••••••••••••••••••••••••••••••••••• 25Uponor brass wall penetration ••••••••••••••••••••••••••••••••••••••••••••••• 26Uponor UPS connection •••••••••••••••••••••••••••••••••••••••••••••••••••• 26Uponor compression tap connection •••••••••••••••••••••••••••••••••••••••••• 27
Uponor fastenings MLCUponor mounting accessories for tap connection ••••••••••••••••••••••••••••••••• 28
Uponor fastening accessories MLCUponor tap connection fi xation •••••••••••••••••••••••••••••••••••••••••••••• 29Uponor tap water sound protection ••••••••••••••••••••••••••••••••••••••••••• 29
Uponor tap water manifolds and accessoriesUponor brass manifolds and accessories •••••••••••••••••••••••••••••••••••••••• 30
Uponor MLCP plumbing system > List of content
EEI-Int-MLC-03.104
Abbreviations
colour [-] colourd [mm] diameterd1 [mm] diameter 1d2 [mm] diameter 2DN [mm] diameter nominalFT [”] female threadgauge [mm] gaugeh [mm] heighth1 [mm] height 1h2 [mm] height 2l [m] length in meterl [mm] lengthMT [”] male threadMT1 [”] male thread 1outlets [-] Number of outletsoutlets [-] Number of outletsOV [V] operating voltages [mm] strength / wall thicknesss1 [mm] strength / wall thickness 1Type [-] Typew [mm] width
Shortcut unit Description
Uponor MLCP plumbing system > Abbreviations
EEI-Int-MLC-03.10 5
List of content
Uponor radiator connection fi ttings for MLCUponor press connection ••••••••••••••••••••••••••••••••••••••••••••••••••• 32Uponor radiator connection adapters •••••••••••••••••••••••••••••••••••••••••• 32Uponor crossing fi tting •••••••••••••••••••••••••••••••••••••••••••••••••••• 33Uponor radiator connection units ••••••••••••••••••••••••••••••••••••••••••••• 33
Uponor radiator manifoldsUponor brass manifold ••••••••••••••••••••••••••••••••••••••••••••••••••••• 34Uponor accessories for radiator manifolds •••••••••••••••••••••••••••••••••••••• 34
Uponor radiator connection accessoriesUponor snap ring ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 35
Uponor pipe fastenings MLCUponor pipe fastenings MLC •••••••••••••••••••••••••••••••••••••••••••••••• 36
Uponor toolsUponor cutting tools •••••••••••••••••••••••••••••••••••••••••••••••••••••• 37Uponor bevelling tools ••••••••••••••••••••••••••••••••••••••••••••••••••••• 38Uponor bending tools ••••••••••••••••••••••••••••••••••••••••••••••••••••• 38Uponor pressing tools ••••••••••••••••••••••••••••••••••••••••••••••••••••• 39Uponor accessories •••••••••••••••••••••••••••••••••••••••••••••••••••••••• 43
International sales and delivery terms ••••••••••••••••••••••••••••••••••••••••• 45
Item search register ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 47
How to contact us •••••••••••••••••••••••••••••••••••••••••••••••••••••••• 51
Uponor MLCP plumbing system > Uponor MLC pipes
Uponor MLC pipes
Uponor MLCP white in coilsDiffusion-tight multi-layer composite pipe (PE-RT - adhesive - longitudi-nally welded aluminium - adhesive - PE-RT) for distribution conduits, rising mains and connection lines for plumbing, radiator connection and fancoil connection. Normally infl ammable, materials classifi cation B2 according to DIN 4102.
Item no. d [mm] s [mm] l [m] Description unit
1013378 16 2.0 100 Uponor MLCP 16x2white in coils 100m 100 m
1013371 16 2.0 200 Uponor MLCP 16x2white in coils 200m 200 m
1013380 16 2.0 500 Uponor MLCP 16x2white in coils 500m 500 m
1013383 18 2.0 200 Uponor MLCP 18x2white in coils 200m 200 m
1013388 20 2.25 100 Uponor MLCP 20x2,25white in coils 100m 100 m
1013392 20 2.25 200 Uponor MLCP 20x2,25white in coils 200m 200 m
1013398 25 2.5 50 Uponor MLCP 25x2,5white in coils 50m 50 m
1013400 25 2.5 100 Uponor MLCP 25x2,5white in coils 100m 100 m
1013401 32 3.0 50 Uponor MLCP 32x3white in coils 50m 50 m
Uponor MLCP white in straight lengthsDiffusion-tight multi-layer composite pipe (PE-RT - adhesive - longitudi-nally welded aluminium - adhesive - PE-RT) for distribution conduits, rising mains and connection lines for plumbing, radiator connection and fancoil connection. Normally infl ammable, materials classifi cation B2 according to DIN 4102.
Item no. d [mm] s [mm] l [m] Description unit
1013432 16 2.0 5 Uponor MLCP 16x2white in straight length 5m 125 m
1013438 20 2.25 5 Uponor MLCP 20x2,25white in straight length 5m 85 m
1013442 25 2.5 5 Uponor MLCP 25x2,5white in straight length 5m 50 m
1013444 32 3.0 5 Uponor MLCP 32x3white in straight length 5m 30 m
1013446 40 4.0 5 Uponor MLCP 40x4white in straight length 5m 20 m
1013449 50 4.5 5 Uponor MLCP 50x4,5white in straight length 5m 20 m
1013451 63 6.0 5 Uponor MLCP 63x6white in straight length 5m 15 m
1013453 75 7.5 5 Uponor MLCP 75x7,5white in straight length 5m 5 m
1013455 90 8.5 5 Uponor MLCP 90x8,5white in straight length 5m 5 m
1013457 110 10.0 5 Uponor MLCP 110x10white in straight length 5m 5 m
Uponor MLCP pre-insulated S 4 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 4 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Normally infl ammable, materials classifi cation B2 according to DIN 4102. For cold water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013623 16 2.0 4.0 blue 100 Uponor MLCP 16 pre-insulated S4round, heat insulated, blue, coil 100m 100 m
1013624 20 2.25 4.0 blue 100 Uponor MLCP 20 pre-insulated S4round, heat insulated, blue, coil 100m 100 m
Uponor MLCP pre-insulated S 6 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 6 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Normally infl ammable, materials classifi cation B2 according to DIN 4102. For cold water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013578 16 2.0 6.0 blue 50 Uponor MLCP 16 pre-insulated S6round, heat insulated, blue, coil 50m 50 m
EEI-Int-MLC-03.106
Uponor MLCP plumbing system > Uponor MLC pipes
Uponor MLC pipes
Uponor MLCP pre-insulated S 9 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 9 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Normally infl ammable, materials classifi cation B2 according to DIN 4102. For cold water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013625 16 2.0 9.0 blue 75 Uponor MLCP 16 pre-insulated S9round, heat insulated, coil 75m 75 m
1013626 20 2.25 9.0 blue 75 Uponor MLCP 20 pre-insulated S9round, heat insulated, coil 75m 75 m
1013627 25 2.5 9.0 blue 50 Uponor MLCP 25 pre-insulated S9round, heat insulated, coil 50m 50 m
Uponor MLCP pre-insulated S 13 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 13 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Normally infl ammable, materials classifi cation B2 according to DIN 4102. For hot water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013628 16 2.0 13.0 blue 75 Uponor MLCP 16 pre-insulated S13round, heat insulated 50%, coil 75m 75 m
1013629 20 2.25 13.0 blue 75 Uponor MLCP 20 pre-insulated S13round, heat insulated 50%, coil 75m 75 m
1013630 25 2.5 13.0 blue 50 Uponor MLCP 25 pre-insulated S13round, heat insulated 50%, coil 50m 50 m
EEI-Int-MLC-03.10 7
Uponor MLCP plumbing system > Uponor MLC pipe conduits
Uponor MLCP conduits
Uponor conduitCorrugated, normally infl ammable, materials classifi cation B2 conforming to DIN4102. Supplied in coils.
Item no. d [mm] d1 [mm] d2 [mm] colour [-] Description unit
1012858 25/20 16 red Uponor conduit red 25/20 MLC 16 50 m
1012862 28/23 18 20 red Uponor conduit red 28/23 MLC 18/20 50 m
1012866 35/29 25 red Uponor conduit red 35/29 MLC 25 50 m
1012859 25/20 16 blue Uponor conduit blue 25/20 MLC 16 50 m
1012863 28/23 18 20 blue Uponor conduit blue 28/23 MLC 18/20 50 m
1012867 35/29 25 blue Uponor conduit blue 35/29 MLC 25 50 m
1012860 25/20 16 black Uponor conduit black 25/20 MLC 16 50 m
1012864 28/23 18 20 black Uponor conduit black 28/23 MLC 18/20 50 m
1012869 35/29 25 black Uponor conduit black 35/29 MLC 25 50 m
1012872 43/36 32 black Uponor conduit black 43/36 MLC 32 25 m
EEI-Int-MLC-03.108
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite elbow
Uponor composite press elbow MLC 16-32Made of PPSU, with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1022714 16 Uponor composite elbow MLC 16-16 10 pcs
1022715 20 Uponor composite elbow MLC 20-20 10 pcs
1022716 25 Uponor composite elbow MLC 25-25 5 pcs
1022717 32 Uponor composite elbow MLC 32-32 5 pcs
Uponor composite press elbow MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1046386 40 Uponor composite press elbow MLC 40-40 5 pcs
1046387 50 Uponor composite press elbow MLC 50-50 3 pcs
Uponor composite press elbow MLC, 45° 40-50Made of PPSU with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1046388 40 Uponor composite press elbow MLC40-40 45° 5 pcs
1046389 50 Uponor composite press elbow MLC50-50 45° 3 pcs
Uponor composite tee
Uponor composite press tee MLC 16-32Made of PPSU, with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1022718 16 Uponor composite tee MLC 16-16-16 10 pcs
1022719 20 Uponor composite tee MLC 20-20-20 10 pcs
1022720 25 Uponor composite tee MLC 25-25-25 5 pcs
1022721 32 Uponor composite tee MLC 32-32-32 5 pcs
EEI-Int-MLC-03.10 9
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite tee
Uponor composite press tee MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1046390 40 Uponor composite press tee MLC 40-40-40 5 pcs
1046391 50 Uponor composite press tee MLC 50-50-50 3 pcs
Uponor composite press tee reducer MLC 16-32Made of PPSU, with fi xed press sleeve made of stainless steel.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1022722 16 20 16 Uponor composite tee reduc. MLC 16-20-16 10 pcs
1022723 20 16 16 Uponor composite tee reduc. MLC 20-16-16 10 pcs
1022724 20 16 20 Uponor composite tee reduc. MLC 20-16-20 10 pcs
1022725 20 20 16 Uponor composite tee reduc. MLC 20-20-16 10 pcs
1022726 20 25 20 Uponor composite tee reduc MLC 20-25-20 10 pcs
1022727 25 16 16 Uponor composite tee reduc. MLC 25-16-16 5 pcs
1022728 25 16 20 Uponor composite tee reduc. MLC 25-16-20 5 pcs
1022729 25 16 25 Uponor composite tee reduc. MLC 25-16-25 5 pcs
1022730 25 20 20 Uponor composite tee reduc. MLC 25-20-20 5 pcs
1022731 25 20 25 Uponor composite tee reduc. MLC 25-20-25 5 pcs
1022732 32 16 32 Uponor composite tee reduc. MLC 32-16-32 5 pcs
1022733 32 20 32 Uponor composite tee reduc. MLC 32-20-32 5 pcs
1022734 32 25 25 Uponor composite tee reduc. MLC 32-25-25 5 pcs
1022735 32 25 32 Uponor composite tee reduc. MLC 32-25-32 5 pcs
Uponor composite press tee reducer MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1046392 40 20 40 Uponor composite press tee reducer MLC40-20-40 5 pcs
1046393 40 25 32 Uponor composite press tee reducer MLC40-25-32 5 pcs
1046394 40 25 40 Uponor composite press tee reducer MLC40-25-40 5 pcs
1046395 40 32 32 Uponor composite press tee reducer MLC40-32-32 5 pcs
1046396 40 32 40 Uponor composite press tee reducer MLC40-32-40 5 pcs
1046397 50 25 40 Uponor composite press tee reducer MLC50-25-40 3 pcs
1046398 50 25 50 Uponor composite press tee reducer MLC50-25-50 3 pcs
1046399 50 32 50 Uponor composite press tee reducer MLC50-32-50 3 pcs
1046400 50 40 50 Uponor composite press tee reducer MLC50-40-50 3 pcs
EEI-Int-MLC-03.1010
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite coupling
Uponor composite press coupling MLC 16-32Made of PPSU, with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1022736 16 Uponor composite coupling MLC 16-16 10 pcs
1022737 20 Uponor composite coupling MLC 20-20 10 pcs
1022738 25 Uponor composite coupling MLC 25-25 5 pcs
1022739 32 Uponor composite coupling MLC 32-32 5 pcs
Uponor composite press coupling MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel.
Item no. d [mm] Description unit
1046401 40 Uponor composite press coupling MLC40-40 5 pcs
1046402 50 Uponor composite press coupling MLC50-50 3 pcs
Uponor composite press reducer MLC 16-32Made of PPSU, with fi xed press sleeve made of stainless steel.
Item no. d [mm] d1 [mm] Description unit
1022740 20 16 Uponor composite reducer MLC 20-16 10 pcs
1022741 25 16 Uponor composite reducer MLC 25-16 5 pcs
1022742 25 20 Uponor composite reducer MLC 25-20 5 pcs
1022743 32 25 Uponor composite reducer MLC 32-25 5 pcs
Uponor composite press coupling reducer MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel
Item no. d [mm] d1 [mm] Description unit
1046403 40 25 Uponor composite press coupling RED. MLC40-25 5 pcs
1046404 40 32 Uponor composite press coupling RED. MLC40-32 5 pcs
1046405 50 32 Uponor composite press coupling RED. MLC50-32 3 pcs
1046406 50 40 Uponor composite press coupling RED. MLC50-40 3 pcs
EEI-Int-MLC-03.10 11
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass connection
Uponor press male connection MLC up to 32Made of tin-plated brass, with fi xed press sleeve. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT [”] Description unit
1014525 16 R ½ Uponor press male con. MLC 16-½ 10 pcs
1014534 16 R ¾ Uponor press male con. MLC 16-¾ 10 pcs
1014540 18 R ½ Uponor press male con. MLC 18-½ 10 pcs
1014546 18 R ¾ Uponor press male con. MLC 18-¾ 10 pcs
1014561 20 R ½ Uponor press male con. MLC 20-½ 10 pcs
1014564 20 R ¾ Uponor press male con. MLC 20-¾ 10 pcs
1014567 20 R 1 Uponor press male con. MLC 20-1 10 pcs
1014589 25 R ¾ Uponor press male con. MLC 25-¾ 5 pcs
1014592 25 R 1 Uponor press male con. MLC 25-1 5 pcs
1014610 32 R 1 Uponor press male con. MLC 32-1 5 pcs
1014613 32 R 1¼ Uponor press male con. MLC 32-1¼ 5 pcs
Uponor press male connection MLC 40-50Made of tin-plated brass, with fi xed press sleeve. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT [”] Description unit
1014624 40 R 1¼ Uponor press male con. MLC 40-1¼ 5 pcs
1014628 40 R 1½ Uponor press male con. MLC 40-1½ 5 pcs
1014636 50 R 1½ Uponor press male con. MLC 50-1½ 3 pcs
1014639 50 R 2 Uponor press male con. MLC 50-2 3 pcs
Uponor press female connection MLC up to 32Made of tin-plated brass, with fi xed press sleeve. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1014536 16 Rp ½ Uponor press female con. MLC 16-½ 10 pcs
1014549 18 Rp ½ Uponor press female con. MLC 18-½ 10 pcs
1014551 18 Rp ¾ Uponor press female con. MLC 18-¾ 10 pcs
1014574 20 Rp ½ Uponor press female con. MLC 20-½ 10 pcs
1014577 20 Rp ¾ Uponor press female con. MLC 20-¾ 10 pcs
1014580 20 Rp 1 Uponor press female con. MLC 20-1 10 pcs
1014599 25 Rp ¾ Uponor press female con. MLC 25-¾ 5 pcs
1014602 25 Rp 1 Uponor press female con. MLC 25-1 5 pcs
1014618 32 Rp 1 Uponor press female con. MLC 32-1 5 pcs
1014621 32 Rp 1¼ Uponor press female con. MLC 32-1¼ 5 pcs
Uponor press female connection MLC 40-50Made of tin-plated brass, with fi xed press sleeve. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1014630 40 Rp 1¼ Uponor press female con. MLC 40-1¼ 5 pcs
1014633 40 Rp 1½ Uponor press female con. MLC 40-1½ 5 pcs
1014641 50 Rp 1½ Uponor press female con. MLC 50-1½ 3 pcs
EEI-Int-MLC-03.1012
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass elbow
Uponor press elbow MLC up to 32Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1014679 16 Uponor press elbow MLC 16-16 10 pcs
1014704 18 Uponor press elbow MLC 18-18 10 pcs
1014724 20 Uponor press elbow MLC 20-20 10 pcs
1014746 25 Uponor press elbow MLC 25-25 5 pcs
1014765 32 Uponor press elbow MLC 32-32 5 pcs
Uponor press elbow MLC 40-50Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1014779 40 Uponor press elbow MLC 40-40 5 pcs
1014791 50 Uponor press elbow MLC 50-50 3 pcs
Uponor press male elbow MLC up to 32Made of tin-plated brass, with fi xed press sleeve. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT [”] Description unit
1014686 16 R ½ Uponor press male elbow MLC 16-½ 10 pcs
1014709 18 R ½ Uponor press male elbow MLC 18-½ 10 pcs
1014713 18 R ¾ Uponor press male elbow MLC 18-¾ 10 pcs
1014729 20 R ½ Uponor press male elbow MLC 20-½ 10 pcs
1014732 20 R ¾ Uponor press male elbow MLC 20-¾ 10 pcs
1014751 25 R ¾ Uponor press male elbow MLC 25-¾ 5 pcs
1014755 25 R 1 Uponor press male elbow MLC 25-1 5 pcs
1014770 32 R 1 Uponor press male elbow MLC 32-1 5 pcs
Uponor press male elbow MLC 40-50Made of tin-plated brass, with fi xed press sleeve. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT [”] Description unit
1014783 40 R 1¼ Uponor press male elbow MLC 40-1¼ 5 pcs
EEI-Int-MLC-03.10 13
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass elbow
Uponor press female elbow MLC up to 32Made of tin-plated brass, with fi xed press sleeve. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1014692 16 Rp ½ Uponor press female elbow MLC 16-½ 10 pcs
1014716 18 Rp ½ Uponor press female elbow MLC 18-½ 10 pcs
1014719 18 Rp ¾ Uponor press female elbow MLC 18-¾ 10 pcs
1014736 20 Rp ½ Uponor press female elbow MLC 20-½ 10 pcs
1014739 20 Rp ¾ Uponor press female elbow MLC 20-¾ 10 pcs
1014757 25 Rp ¾ Uponor press female elbow MLC 25-¾ 5 pcs
1014761 25 Rp 1 Uponor press female elbow MLC 25-1 5 pcs
1014774 32 Rp 1 Uponor press female elbow MLC 32-1 5 pcs
Uponor press female elbow MLC 40-50Made of tin-plated brass, with fi xed press sleeve. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1014786 40 Rp 1½ Uponor press female elbow MLC 40-1½ 5 pcs
1014794 50 Rp 1½ Uponor press female elbow MLC 50-1½ 3 pcs
Uponor press elbow 45° MLC 25-32Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1014812 25 Uponor press elbow 45° MLC 25-25 5 pcs
1014825 32 Uponor press elbow 45° MLC 32-32 5 pcs
Uponor press elbow 45° MLC 40-50Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1014836 40 Uponor press elbow 45° MLC 40-40 5 pcs
1014848 50 Uponor press elbow 45° MLC 50-50 3 pcs
EEI-Int-MLC-03.1014
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass tee
Uponor press tee MLC up to 32Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1014918 16 Uponor press tee MLC 16-16-16 10 pcs
1014944 18 Uponor press tee MLC 18-18-18 10 pcs
1014976 20 Uponor press tee MLC 20-20-20 10 pcs
1015028 25 Uponor press tee MLC 25-25-25 5 pcs
1015073 32 Uponor press tee MLC 32-32-32 5 pcs
Uponor press tee MLC 40-50Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1015116 40 Uponor press tee MLC 40-40-40 5 pcs
1015146 50 Uponor press tee MLC 50-50-50 3 pcs
EEI-Int-MLC-03.10 15
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass tee
Uponor press tee reducer MLC up to 32Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1014923 16 20 16 Uponor press tee reducer MLC 16-20-16 10 pcs
1014935 18 16 16 Uponor press tee reducer MLC 18-16-16 10 pcs
1014938 18 16 18 Uponor press tee reducer MLC 18-16-18 10 pcs
1014941 18 18 16 Uponor press tee reducer MLC 18-18-16 10 pcs
1014957 20 16 16 Uponor press tee reducer MLC 20-16-16 10 pcs
1014961 20 16 20 Uponor press tee reducer MLC 20-16-20 10 pcs
1014966 20 18 18 Uponor press tee reducer MLC 20-18-18 10 pcs
1014968 20 18 20 Uponor press tee reducer MLC 20-18-20 10 pcs
1014970 20 20 16 Uponor press tee reducer MLC 20-20-16 10 pcs
1014974 20 20 18 Uponor press tee reducer MLC 20-20-18 10 pcs
1014981 20 25 16 Uponor press tee reducer MLC 20-25-16 10 pcs
1014983 20 25 20 Uponor press tee reducer MLC 20-25-20 10 pcs
1014996 25 16 16 Uponor press tee reducer MLC 25-16-16 5 pcs
1015000 25 16 20 Uponor press tee reducer MLC 25-16-20 5 pcs
1015002 25 16 25 Uponor press tee reducer MLC 25-16-25 5 pcs
1015007 25 18 18 Uponor press tee reducer MLC 25-18-18 5 pcs
1015011 25 18 25 Uponor press tee reducer MLC 25-18-25 5 pcs
1015015 25 20 16 Uponor press tee reducer MLC 25-20-16 5 pcs
1015017 25 20 20 Uponor press tee reducer MLC 25-20-20 5 pcs
1015021 25 20 25 Uponor press tee reducer MLC 25-20-25 5 pcs
1015033 25 32 25 Uponor press tee reducer MLC 25-32-25 5 pcs
1015053 32 16 32 Uponor press tee reducer MLC 32-16-32 5 pcs
1015057 32 18 32 Uponor press tee reducer MLC 32-18-32 5 pcs
1015060 32 20 32 Uponor press tee reducer MLC 32-20-32 5 pcs
1015064 32 25 25 Uponor press tee reducer MLC 32-25-25 5 pcs
1015068 32 25 32 Uponor press tee reducer MLC 32-25-32 5 pcs
Uponor press tee reducer MLC 40-50Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1015078 32 50 32 Uponor press tee reducer MLC 32-50-32 3 pcs
1015096 40 20 40 Uponor press tee reducer MLC 40-20-40 5 pcs
1015100 40 25 32 Uponor press tee reducer MLC 40-25-32 5 pcs
1015103 40 25 40 Uponor press tee reducer MLC 40-25-40 5 pcs
1015107 40 32 32 Uponor press tee reducer MLC 40-32-32 5 pcs
1015111 40 32 40 Uponor press tee reducer MLC 40-32-40 5 pcs
1015131 50 25 40 Uponor press tee reducer MLC 50-25-40 3 pcs
1015134 50 25 50 Uponor press tee reducer MLC 50-25-50 3 pcs
1015138 50 32 50 Uponor press tee reducer MLC 50-32-50 3 pcs
1015142 50 40 50 Uponor press tee reducer MLC 50-40-50 3 pcs
EEI-Int-MLC-03.1016
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass tee
Uponor press male tee MLCMade of tin-plated brass, with fi xed press sleeve. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT [”] d1 [mm] Description unit
1014927 16 R ½ 16 Uponor press male tee MLC 16-½-16 10 pcs
1015038 25 R ¾ 25 Uponor press male tee MLC 25-¾-25 5 pcs
1015082 32 R ¾ 32 Uponor press male tee MLC 32-¾-32 5 pcs
Uponor press female tee MLC up to 32Made of tin-plated brass, with fi xed press sleeve. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] d1 [mm] Description unit
1014931 16 Rp ½ 16 Uponor press female tee MLC 16-½-16 10 pcs
1014954 18 Rp ½ 18 Uponor press female tee MLC 18-½-18 10 pcs
1014987 20 Rp ½ 20 Uponor press female tee MLC 20-½-20 10 pcs
1014991 20 Rp ¾ 20 Uponor press female tee MLC 20-¾-20 10 pcs
1015044 25 Rp ½ 25 Uponor press female tee MLC 25-½-25 5 pcs
1015048 25 Rp ¾ 25 Uponor press female tee MLC 25-¾-25 5 pcs
1015088 32 Rp ½ 32 Uponor press female tee MLC 32-½-32 5 pcs
1015091 32 Rp ¾ 32 Uponor press female tee MLC 32-¾-32 5 pcs
Uponor press female tee MLC 40-50Made of tin-plated brass, with fi xed press sleeve. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] d1 [mm] Description unit
1015123 40 Rp ¾ 40 Uponor press female tee MLC 40-¾-40 5 pcs
1015149 50 Rp 1 50 Uponor press female tee MLC 50-1-50 3 pcs
Uponor brass coupling
Uponor press coupling MLC up to 32For connection of Uponor MLC pipes, made of tin-plated brass with fi xed press sleeve.
Item no. d [mm] Description unit
1015164 16 Uponor press coupling MLC 16-16 10 pcs
1015176 18 Uponor press coupling MLC 18-18 10 pcs
1015187 20 Uponor press coupling MLC 20-20 10 pcs
1015205 25 Uponor press coupling MLC 25-25 5 pcs
1015219 32 Uponor press coupling MLC 32-32 5 pcs
EEI-Int-MLC-03.10 17
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass coupling
Uponor press coupling MLC 40-50For connection of Uponor MLC pipes, made of tin-plated brass with fi xed press sleeve.
Item no. d [mm] Description unit
1015236 40 Uponor press coupling MLC 40-40 5 pcs
1015248 50 Uponor press coupling MLC 50-50 3 pcs
Uponor press reducer MLC up to 32Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] d1 [mm] Description unit
1015172 18 16 Uponor press reducer MLC 18-16 10 pcs
1015179 20 16 Uponor press reducer MLC 20-16 10 pcs
1015185 20 18 Uponor press reducer MLC 20-18 10 pcs
1015194 25 16 Uponor press reducer MLC 25-16 5 pcs
1015199 25 18 Uponor press reducer MLC 25-18 5 pcs
1015202 25 20 Uponor press reducer MLC 25-20 5 pcs
1015215 32 20 Uponor press reducer MLC 32-20 5 pcs
1015217 32 25 Uponor press reducer MLC 32-25 5 pcs
Uponor press reducer MLC 40-50Made of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] d1 [mm] Description unit
1015230 40 25 Uponor press reducer MLC 40-25 5 pcs
1015233 40 32 Uponor press reducer MLC 40-32 5 pcs
1015242 50 32 Uponor press reducer MLC 50-32 3 pcs
1015245 50 40 Uponor press reducer MLC 50-40 3 pcs
Uponor brass screw connection
Uponor press connection swivel MLC up to 32Made of tin-plated brass, with fi xed press sleeve and fl at seal. Releasable screw connector for connection to on-wall fi ttings, fi lters and shut-off valves. Thread acc. to DIN EN ISO 228-1.
Item no. d [mm] FT [”] Description unit
1015270 16 G ½ Uponor press con. swivel MLC 16-½FT 10 pcs
1015274 16 G ¾ Uponor press con. swivel MLC 16-¾FT 10 pcs
1015277 18 G ½ Uponor press con. swivel MLC 18-½FT 10 pcs
1015280 18 G ¾ Uponor press con. swivel MLC 18-¾FT 10 pcs
1015283 20 G ½ Uponor press con. swivel MLC 20-½FT 10 pcs
1015286 20 G ¾ Uponor press con. swivel MLC 20-¾FT 10 pcs
1015295 25 G ¾ Uponor press con. swivel MLC 25-¾FT 5 pcs
1015297 25 G 1 Uponor press con. swivel MLC 25-1FT 5 pcs
1015301 32 G 1¼ Uponor press con. swivel MLC 32-1¼FT 5 pcs
EEI-Int-MLC-03.1018
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass screw connection
Uponor press connection swivel MLC 40-50Made of tin-plated brass, with fi xed press sleeve and fl at seal. Releasable screw connector for connection to on-wall fi ttings, fi lters and shut-off valves. Thread acc. to DIN EN ISO 228-1.
Item no. d [mm] FT [”] Description unit
1015304 40 G 1½ Uponor press con. swivel MLC 40-1½FT 5 pcs
1015309 50 G 1¾ Uponor press con. swivel MLC 50-1¾FT 3 pcs
1015314 50 G 2 Uponor press con. swivel MLC 50-2FT 3 pcs
EEI-Int-MLC-03.10 19
Uponor MLCP plumbing system > Uponor compression fi ttings MLC up to 25 mm
Uponor compression fi ttings MLC up to 25 mm
Uponor compression adapter MLCOne-piece compression adapter made of brass, union nut nickel plated, press sleeve made of PPSU and press ring made of PA. For connection of Uponor MLC pipes to manifolds. Female thread ¾“ eurocone acc. to DIN EN ISO 228-1.
Item no. d [mm] FT [”] Description unit
1013846 16 ½ Uponor compression adapter MLC 16-½FT 20 pcs
1013854 18 ½ Uponor compression adapter MLC 18-½FT 10 pcs
1013832 20 ½ Uponor compression adapter MLC 20-½FT 10 pcs
1013989 16 ¾ Uponor eurocone compr.adap. MLC 16-¾FT 10 pcs
1013998 18 ¾ Uponor eurocone compr.adap. MLC 18-¾FT 10 pcs
1014004 20 ¾ Uponor eurocone compr.adap. MLC 20-¾FT 10 pcs
1014011 25 ¾ Uponor eurocone compr.adap. MLC 25-¾FT 10 pcs
Uponor coupling nippleMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] Description unit
1013894 ½ Uponor coupling nipple MLC ½MT-½MT 20 pcs
Uponor coupling nipple euroconeMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] Description unit
1006641 ¾ Uponor eurocone nipple MLC ¾MT-¾MT 10 pcs
Uponor conversion nippleMade of tin-plated brass. Female thread acc.to DIN EN 10226-1. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] FT [”] Description unit
1013907 ½ ½ Uponor nipple ½MT-½FT 10 pcs
1014143 ¾ ¾ Uponor eurocone nipple ¾MT-¾FT 10 pcs
Uponor elbowMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] Description unit
1013914 ½ Uponor male elbow ½ 10 pcs
1014145 ¾ Uponor eurocone elbow ¾MT-¾MT 10 pcs
EEI-Int-MLC-03.1020
Uponor MLCP plumbing system > Uponor compression fi ttings MLC up to 25 mm
Uponor compression fi ttings MLC up to 25 mm
Uponor conversion elbowMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1. Female thread acc.to DIN EN 10226-1.
Item no. MT [”] FT [”] Description unit
1013932 ½ ½ Uponor conversion elbow ½MT-½FT 10 pcs
Uponor teeMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] Description unit
1013946 ½ Uponor tee ½ MT 10 pcs
1014147 ¾ Uponor tee eurocone ¾ MT 5 pcs
EEI-Int-MLC-03.10 21
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
Uponor Riser system fi ttings MLC 63 -110 mm
Uponor RS couplingMade of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 2 lock pins.
Item no. Type [-] Description unit
1029144 RS 2 Uponor RS 2 coupling 2 pcs
1029145 RS 3 Uponor RS 3 coupling 2 pcs
Uponor RS teeMade of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 3 lock pins.
Item no. Type [-] Description unit
1029142 RS 2 Uponor RS 2 tee 1 pcs
1029143 RS 3 Uponor RS 3 tee 1 pcs
Uponor RS elbowMade of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 2 lock pins.
Item no. Type [-] Description unit
1029138 RS 2 Uponor RS 2 elbow 1 pcs
1029139 RS 3 Uponor RS 3 elbow 1 pcs
Uponor RS elbow 45°Made of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 2 lock pins.
Item no. Type [-] Description unit
1029140 RS 2 Uponor RS 2 elbow 45° 1 pcs
1029141 RS 3 Uponor RS 3 elbow 45° 1 pcs
Uponor RS reducerMade of tin-plated brass as reducer from RS 3 to RS 2 including 1 lock pin.
Item no. Type [-] Description unit
1029146 RS 3 / RS 2 Uponor RS 3 / RS 2 reducer 2 pcs
EEI-Int-MLC-03.1022
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
Uponor Riser system fi ttings MLC 63 -110 mm
Uponor RS press adapter MLC 25-32Made of tin-plated brass, press sleeve made of aluminium fi xed with stop ring segment as stop for pressing jaw. Fits to all RS 2 base parts.
Item no. Type [-] d [mm] Description unit
1029121 RS 2 25 Uponor RS 2 press adapter MLC 25 1 pcs
1029122 RS 2 32 Uponor RS 2 press adapter MLC 32 1 pcs
Uponor RS press adapter MLC 40-110Made of tin-plated brass, press sleeve made of stainless steel fi xed with stop ring segment as stop for pressing jaw. Fits to all RS 2 or RS 3 base parts.
Item no. Type [-] d [mm] Description unit
1029123 RS 2 40 Uponor RS 2 press adapter MLC 40 1 pcs
1029124 RS 2 50 Uponor RS 2 press adapter MLC 50 1 pcs
1029125 RS 2 63 Uponor RS 2 press adapter MLC 63 1 pcs
1029126 RS 2 75 Uponor RS 2 press adapter MLC 75 1 pcs
1029127 RS 3 90 Uponor RS 3 press adapter MLC 90 1 pcs
1029128 RS 3 110 Uponor RS 3 press adapter MLC 110 1 pcs
Uponor RS female adapterMade of tin-plated brass. Fits to all RS 2 or RS 3 base parts. Female thread acc. to DIN EN 10 226-1.
Item no. Type [-] FT [”] Description unit
1029134 RS 2 Rp 1 Uponor RS 2 female adapter 1 FT 1 pcs
1029135 RS 2 Rp 2 Uponor RS 2 female adapter 2 FT 1 pcs
1029136 RS 2 Rp 2 ½ Uponor RS 2 female adapter 2 ½ FT 1 pcs
1029137 RS 3 Rp 3 Uponor RS 3 female adapter 3 FT 1 pcs
Uponor RS male adapterMade of tin-plated brass. Fits to all RS 2 or RS 3 base parts. Male thread acc. to DIN EN 10 226-1 for sealing in.
Item no. Type [-] MT [”] Description unit
1029131 RS 2 R 2 Uponor RS 2 male adapter 2 MT 1 pcs
1029132 RS 2 R 2 ½ Uponor RS 2 male adapter 2 ½ MT 1 pcs
1029133 RS 3 R 3 Uponor RS 3 male adapter 3 MT 1 pcs
Uponor RS fl angeMade of tin-plated brass. Fits to all RS 3 base parts. Flange PN 16. Bolt circle with 8 holes.
Item no. Type [-] DN [mm] Description unit
1029129 RS 3 80 Uponor RS 3 fl ange adapter DN 80 1 pcs
1029130 RS 3 100 Uponor RS 3 fl ange adapter DN 100 1 pcs
EEI-Int-MLC-03.10 23
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
Uponor Riser system fi ttings MLC 63 -110 mm
Uponor press connection swivel MLCMade of tin-plated brass, with fi xed press sleeve and fl at seal. Releasable screw connector for connection to on-wall fi ttings, fi lters and shut-off valves. Thread acc. to DIN EN ISO 228-1.
Item no. d [mm] FT [”] Description unit
1029147 63 G 2 3/8Uponor press con. swivel MLC 63-G2 3/8 1 pcs
Uponor RS Spacer long versionMade of tin-plated brass. Spacer to connect RS base parts of equal dimensions e.g to create T-manifold or shift in distribution lines.
Item no. Type [-] l [mm] Description unit
1046477 RS 2 130 Uponor RS 2 spacer 130 mm 1 pcs
1046478 RS 3 210 Uponor RS 3 spacer 210 mm 1 pcs
Uponor RS Spacer 5 mmMade of tin-plated brass. Spacer to connect RS base parts of equal dimensions.
Item no. Type [-] l [mm] Description unit
1046750 RS 2 5 Uponor RS 2 spacer 5 mm 1 pcs
1046751 RS 3 5 Uponor RS 3 spacer 5 mm 1 pcs
Uponor RS 2/3 spare partsmade of plastic to lock the RS 2 insert to the RS 2 base part.
Item no. Description unit
1042921 Uponor RS 2 lock pin black 10 pcs
1042922 Uponor RS 3 lock pin grey 10 pcs
Uponor stop ring segment 40-50 spare partsmade of plastic to fi x the pressing sleeve to the fi tting and as press stop ring .
Item no. d [mm] Description unit
1042923 40 Uponor stop ring segment 40 20 pcs
1042924 50 Uponor stop ring segment 50 20 pcs
Uponor stop ring segment 63-110 spare partsmade of plastic to fi x the pressing sleeve to the fi tting and as press stop ring .
Item no. d [mm] Description unit
1042925 63 Uponor stop ring segment 63 20 pcs
1042926 75 Uponor stop ring segment 75 20 pcs
1042927 90 Uponor stop ring segment 90 20 pcs
1042928 110 Uponor stop ring segment 110 20 pcs
EEI-Int-MLC-03.1024
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor brass tap connection
Uponor press tap elbow MLCFor twist-proof attachment to the MLCP mounting angles and mounting plates by means of fi xing elements. Made of tin-plated brass, with fi xed press sleeve, stop edge and fi xing element. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1015442 16 Rp ½ Uponor press tap elbow MLC 16-½FT 10 pcs
1015479 18 Rp ½ Uponor press tap elbow MLC 18-½FT 10 pcs
1015498 20 Rp ½ Uponor press tap elbow MLC 20-½FT 10 pcs
Uponor press tap wall plate MLCMade of tin-plated brass, with fi xed press sleeve, stop edge and round fl ange. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1015455 16 Rp ½ Uponor press tap wall plate MLC 16-½FT 10 pcs
1015486 18 Rp ½ Uponor press tap wall plate MLC 18-½FT 10 pcs
1015512 20 Rp ½ Uponor press tap wall plate MLC 20-½FT 10 pcs
1015515 20 Rp ¾ Uponor press tap wall plate MLC 20-¾FT 5 pcs
Uponor press tap elbow MLC, longFor twist-proof attachment to the MLCP mounting angles and mounting plates by means of fi xing elements. Made of tin-plated brass, with fi xed press sleeve, stop edge and fi xing element. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1015469 16 Rp ½ Uponor press tap elbow MLC 16-½FT long 10 pcs
Uponor press tap twin elbow MLC, 90° longFor twist-proof attachment to the MLCP mounting angles and mounting plates by means of fi xing elements. Made of tin-plated brass, with fi xed press sleeve, stop edge and fi xing element. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] d1 [mm] Description unit
1015473 16 Rp ½ 16 Uponor press tap twin elbow MLC 16-½FT90°, long 10 pcs
1015491 18 Rp ½ 18 Uponor press tap twin elbow MLC 18-½FT90°, long 10 pcs
1015523 20 Rp ½ 20 Uponor press tap twin elbow MLC 20-½FT90°, long 10 pcs
EEI-Int-MLC-03.10 25
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor brass tap connection
Uponor press tap twin elbow MLC, 160° longFor twist-proof attachment to the MLCP mounting angles and mounting plates by means of fi xing elements. Made of tin-plated brass, with fi xed press sleeve, stop edge and fi xing element. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] d1 [mm] Description unit
1015476 16 Rp ½ 16 Uponor press tap twin elbow MLC 16-½FT160°, long 5 pcs
Uponor brass wall penetration
Uponor press wall penetration MLCFor twist-proof attachment. Made of tin-plated brass, with fi xed press sleeve and stop edge. For lead-through through walls. Female thread acc. to DIN EN 10226-1. Dimensions of attachment plate (H x W x D) 100 x 50 x 2 mm. Hole circle diameter 33 mm.
Item no. d [mm] FT [”] Description unit
1015572 16 Rp ½ Uponor press wall pene. MLC 16- ½FTstraight 10 pcs
Uponor press wall penetration MLC, elbowFor twist-proof attachment. Made of tin-plated brass, with fi xed press sleeve and stop edge. For lead-through through walls. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1015460 16 Rp ½ Uponor press wall pene. elb.MLC 16-½FTelbow, for lightweight constr. 5 pcs
Uponor UPS connection
Uponor press UPS elbow MLC, planeMade of tin-plated brass, with fi xed press sleeve and plastic ring as push-in stop. Elbow for connecting to in-wall mounted lavatory fl ush-water tank. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT [”] Description unit
1015636 16 Rp ½ Uponor press UPS elbow MLC 16-½FT, plplane 5 pcs
EEI-Int-MLC-03.1026
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor compression tap connection
Uponor compression tap elbowFor the twist-proof connection to mounting angles and mounting plates by means of fi xing clip. Made of tin-plated brass, with fi xing clip for Uponor compression adapter MLC. Female thread acc.to DIN EN 10226-1. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] FT [”] Description unit
1015560 ½ Rp ½ Uponor compression tap elbow long ½ 10 pcs
Uponor compression tap wall plateFor twist-proof connection. Made of tin-plated brass, with fi xing bracket for Uponor compression adapter MLC. Female thread acc.to DIN EN 10226-1. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] FT [”] Description unit
1015559 ½ Rp ½ Uponor compression tap wall plate ½ 10 pcs
Uponor compression tap twin elbow 90°For the twist-proof connection to mounting angles and mounting plates by means of fi xing clip. Made of tin-plated brass, with fi xing clip for Uponor compression adapter MLC. Female thread acc.to DIN EN 10226-1. Male thread acc.to DIN EN ISO 228-1.
Item no. MT [”] FT [”] MT1 [”] Description unit
1015553 ½ Rp ½ ½ Uponor compress. tap twin elbow 90° ½ 10 pcs
EEI-Int-MLC-03.10 27
Uponor MLCP plumbing system > Uponor fastenings MLC
Uponor mounting accessories for tap connection
Uponor mounting plateFor the installation of Uponor press tap connection elbow or Uponor press tap distribution elbow. Positioning of the connections in the given raster by means of fi xing clips and arresting device possible. With holes and slots for easy attachment. Made of galvanized steel.
Item no. gauge [mm] Description unit
1015401 75/150 Uponor mounting plate 75/150mm 10 pcs
Uponor mounting angleFor the installation of Uponor press tap connection elbow or Uponor press tap distribution elbow. Positioning of the connections in the given raster by means of fi xing clips and arresting device possible. With holes and slots for easy attachment. Made of galvanized steel.
Item no. gauge [mm] Description unit
1015403 75/150 Uponor mounting angle 75/150mm 10 pcs
1015405 100 Uponor mounting angle 100mm 10 pcs
Uponor mounting trackFor the installation of Uponor press tap connection elbows, Uponor press tap distribution elbows and Uponor press tap connection elbows with round fl ange MLC. Positioning of the connections in the given raster by means of fi xing clip and arresting device, also by means of self-tapping screws possible. Simple bending by means of Uponor bending tool for mounting track (Item-No. 1015424). Made of galvanized steel.
Item no. l [mm] Description unit
1015392 2000 Uponor mounting track, length 2000mm50, 75, 100, 125, 150 mm 10 pcs
EEI-Int-MLC-03.1028
Uponor MLCP plumbing system > Uponor fastening accessories MLC
Uponor tap connection fi xation
Uponor fi xing clipAs replacement fi xing clamp for all Uponor tap water systems MLC. Made of steel.
Item no. Description unit
1015385 Uponor fi xing clip 10 pcs
Uponor tap water sound protection
Uponor sound protection setSuitable for installation to Uponor press tap connection elbows with round fl ange MLC 16-½FT. Made of EPDM. Tested sound protection acc. to DIN 4109.
Item no. Description unit
1015539 Uponor sound protection set 1 pcs
EEI-Int-MLC-03.10 29
Uponor MLCP plumbing system > Uponor tap water manifolds and accessories
Uponor brass manifolds and accessories
Uponor manifold SMade of tin-plated brass, with connection 1“ for male thread or female thread, outlets ½“ male thread. Corresponding compression adapters for connecting the Uponor pipes from the basic assortment.
Item no. outlets [-] l [mm] Description unit
1014107 2 121 Uponor manifold S 2 way 1 pcs
1014111 3 171 Uponor manifold S 3 way 1 pcs
1014109 4 221 Uponor manifold S 4 way 1 pcs
Uponor manifold SHMade of tin-plated brass. With connection 1“ for male thread or female thread, outlets ½“ male thread and valves to close each outlet separate. Corresponding compression adapters for connecting the Uponor MLC pipes from the basic assortment.
Item no. outlets [-] l [mm] Description unit
1014137 2 95 Uponor manifold SH 2 way 1 pcs
1014138 3 130 Uponor manifold SH 3 way 1 pcs
1014139 4 165 Uponor manifold SH 4 way 1 pcs
Uponor manifold S/SH capMade of coated brass, including seal for the manifold S/SH.
Item no. FT [”] Description unit
1014120 ½ Uponor manifold S/SH cap ½FT 20 pcs
1014121 1 Uponor manifold S/SH cap 1FT 20 pcs
Uponor manifold S/SH plugMade of coated brass, for manifold S/SH.
Item no. MT [”] Description unit
1014123 1 Uponor manifold S/SH plug 1MT 20 pcs
Uponor manifold S bracketMade of galvanized steel, for the sound protected attachment of the manifolds S. Can be used for Uponor manifold cabinet.
Item no. Description unit
1014117 Uponor manifold S bracket 1 pcs
EEI-Int-MLC-03.1030
Uponor MLCP plumbing system > Uponor tap water manifolds and accessories
Uponor brass manifolds and accessories
Uponor manifold SH bracketMade of galvanized steel, for the attachment of the manifolds SH.
Item no. Description unit
1045451 Uponor manifold SH bracket ¾“ and 1“ 1 set
EEI-Int-MLC-03.10 31
Uponor MLCP plumbing system > Uponor radiator connection fi ttings for MLC
Uponor press connection
Uponor radiant connection pipeFor pressing, made of coated copper pipe 15 x 1 mm with self sealing thread. The connection of the coated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Item no. d [mm] MT1 [”] l [mm] Description unit
1015425 Cu 15 ½ 350 Uponor radiant con. ½MT-15Cu, 350 20 pcs
Uponor press elbow MLCFor pressing, with coated copper pipe 15 x 1 mm. The connection of the coated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Item no. d [mm] l [mm] Description unit
1015626 16 350 Uponor press con. elbow MLC 16 L 35015CU 20 pcs
1015631 16 1100 Uponor press con. elbow MLC 16 L110015CU 20 pcs
1015643 18 350 Uponor press con. elbow MLC 18 L 35015CU 20 pcs
Uponor press connection tee MLCFor pressing, with cranked copper pipe 15 x 1 mm, coated. The connection of the coated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Item no. d [mm] l [mm] Description unit
1015628 16 350 Uponor press con. tee MLC 16-16 L 35015CU 20 pcs
1015653 20 350 Uponor press con. tee MLC 20-20 L 35015CU 20 pcs
Uponor radiator connection adapters
Uponor eurocone compression adapter CuWith ¾FT eurocone, elastically sealing, for the connection of the coated copper pipe 15 x 1 mm of the Uponor press connection elbow, Uponor press connection tee to the tap battery, radiator or Uponor radiator connection adapter with ¾FT eurocone. Coated brass union nut, brass clamp ring blank and sealing cone made of EPDM. Ribbed union nut with wrench size 30.
Item no. d [mm] FT [”] Description unit
1013830 Cu 15 ¾ Uponor eurocone adapter G¾-15CU 10 pcs
Uponor radiator connection adapterSelf-sealing. For the connection of radiators with ½ female thread connectors, ¾ male thread eurocone for the connection of Cu-pipe, 15 x 1 mm, with clamp compression adapter. Made of coated brass.
Item no. MT [”] MT1 [”] Description unit
1013906 ½ ¾ Uponor radiator con. adapt. ½MT-¾MT 10 pcs
EEI-Int-MLC-03.1032
Uponor MLCP plumbing system > Uponor radiator connection fi ttings for MLC
Uponor radiator connection adapters
Uponor connection set Danfoss MLCMade of coated brass, pressure screw with male thread, with joint protection sleeve and clamp ring, fi t to Danfoss radiator valves with female thread. O-Ring, blue, made of EPDM.
Item no. d [mm] MT [”] Description unit
1013970 16 ½ Uponor con. set Danfoss 16-½MT 20 pcs
Uponor connection set Heimeier MLCMade of coated brass, pressure screw with male thread, with joint protection sleeve and clamp ring, fi t to Heimeier radiator valves with female thread. O-Ring, grey, made of EPDM.
Item no. d [mm] MT [”] Description unit
1013978 16 ½ Uponor con. set Heimeier 16-½MT 20 pcs
Uponor crossing fi tting
Uponor press crossing MLCFor cross-over-free connection of a radiator on the raw fl oor, made of coated brass, with fi xed press sleeves, incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations! Dimensions of insulation box (Length x Width x Height): 115 x 115 x 55 mm.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1015634 16 16 16 Uponor press crossing MLC 16-16-16 1 pcs
1015661 20 16 20 Uponor press crossing MLC 20-16-20 1 pcs
1015659 20 16 16 Uponor press crossing MLC 20-16-16 1 pcs
1015663 20 20 20 Uponor press crossing MLC 20-20-20 1 pcs
Uponor radiator connection units
Uponor radiator connection16 x 2 in an insulation box made of polystyrene with removable protective cap (WLG 040). Insulation box, fl ame resistant, B1 acc. to DIN 4102.
Item no. d [mm] l [mm] h [mm] h1 [mm] h2 [mm] w [mm] Description unit
1013134 16 50 260 240 215 100 Uponor radiator con. unit MLC 16, H 215height 215 mm 10 pcs
1007077 16 50 285 265 240 100 Uponor radiator con. unit MLC 16, H 240height 240 mm 10 pcs
EEI-Int-MLC-03.10 33
Uponor MLCP plumbing system > Uponor radiator manifolds
Uponor brass manifold
Uponor manifold HPre-assembled manifold for the distribution of heating water for the radiator connection. The manifold shall be operated with heating water acc. to VDI 2035. Manifold bars made of brass, with fl at-sealing connection 1“ female thread including fl at seal, on one side, with ½ female thread including plugs for optional connection of a fi ller and emptying tap. Spacing of the several outlets: 50 mm. One air valve for each manifold bar. Colour code for recognizing heating loop supply and/or return fl ow with attachable label for room designation. Heating loop connections ¾ male threaded eurocone acc. to DIN V 3838 to fi t compression adapters, including plastic holding attachments with sound protection padding. Max. water volume per manifold: 3.5 m³/h (12-fold) Observe tightening torque values!
Item no. outlets [-] l [mm] Description unit
1012877 2 122 Uponor manifold H 2 way l=122 1 pcs
1012878 3 172 Uponor manifold H 3 way l=172 1 pcs
1012879 4 222 Uponor manifold H 4 way l=222 1 pcs
1012880 5 272 Uponor manifold H 5 way l=272 1 pcs
1012881 6 322 Uponor manifold H 6 way l=322 1 pcs
1012882 7 372 Uponor manifold H 7 way l=372 1 pcs
1012883 8 422 Uponor manifold H 8 way l=422 1 pcs
1012884 9 472 Uponor manifold H 9 way l=472 1 pcs
1012885 10 522 Uponor manifold H 10 way l=522 1 pcs
1012886 11 572 Uponor manifold H 11 way l=572 1 pcs
1012887 12 622 Uponor manifold H 12 way l=622 1 pcs
Uponor accessories for radiator manifolds
Uponor ball valveMade of plated brass. With fl at-sealing vertical screw connection 1 MT, compatible with all Uponor brass manifolds. Set consists of two ball valves. Length: 60 mm.
Item no. MT [”] FT [”] Description unit
1012913 1 ¾ Uponor manifold H ball valve 1MT-¾FT 1 set
Uponor manifold H capMade of coated brass, with eurocone sealing insert.
Item no. FT [”] Description unit
1014122 G ¾ Uponor manifold H cap ¾FT eurocone 10 pcs
EEI-Int-MLC-03.1034
Uponor MLCP plumbing system > Uponor radiator connection accessories
Uponor snap ring
Uponor snap ring whitePlastic rings white, made of polypropylene, for Uponor MLC pipes. Required distance (pipe middle - middle) between two snap rings, e.g. for supply and return of the heating line approx. 50 mm. Normally infl amma-ble, materials classifi cation B2 acc. to DIN 4102.
Item no. d [mm] Description unit
1011370 16 Uponor snap ring white 16 50 pcs
1011371 18 Uponor snap ring white 18 50 pcs
1011372 20 Uponor snap ring white 20 50 pcs
Uponor double snap ringPlastic double snap ring white, made of polypropylene, for Uponor MLC pipes 14 - 20 mm, to cover fl oor and/or wall penetration of the radiator connection pipe line. The cascaded penetrations can be severed easily with a knife according to desired pipe dimension. The snap ring consists of two halves, which are pressed together with two push buttons by hand. Normally infl ammable, material classifi cation B2 acc. to DIN 4102. Required inside micrometer (pipe middle - middle) between two Uponor MLC pipes for supply and return fl ow: 50 mm.
Item no. d [mm] Description unit
1011373 14-20 Uponor double snap ring white 14-20 50 pcs
EEI-Int-MLC-03.10 35
Uponor MLCP plumbing system > Uponor pipe fastenings MLC
Uponor pipe fastenings MLC
Uponor pipe clip 16 - 40White, for Uponor MLC pipes with outside diameter 14, 16, 18, 20, 25, 32, 40 mm for on-wall mounting. Normally infl ammable, materials classifi cation B2 acc. to DIN 4102.
Item no. d [mm] Description unit
1013142 16 Uponor pipe clip 16 mm white 100 pcs
1013144 20 Uponor pipe clip 20 mm white 50 pcs
1013145 25 Uponor pipe clip 25 mm white 50 pcs
1013146 32 Uponor pipe clip 32 mm white 50 pcs
1013147 40 Uponor pipe clip 40 mm white 25 pcs
Uponor single plugged hookFor fi xing pipes up to a max. outside diameter of 32 mm to the raw concrete ceiling. Colour: blue. Drill hole 8 mm.
Item no. d [mm] l [mm] Description unit
1013137 - 32 60 Uponor single plugged hook 6 cm 50 pcs
1013138 - 32 80 Uponor single plugged hook 8 cm 50 pcs
Uponor twin plugged hookFor fi xing parallel pipes with a max. outside diameter of 32 mm to the raw concrete ceiling. Colour: blue. Drill hole 8 mm.
Item no. d [mm] l [mm] Description unit
1013139 - 32 60 Uponor twin plugged hook 6cm 50 pcs
1013140 - 32 80 Uponor twin plugged hook 8cm 50 pcs
EEI-Int-MLC-03.1036
Uponor MLCP plumbing system > Uponor tools
Uponor cutting tools
Uponor pipe cutter up to 32For Uponor pipes.
Item no. d [mm] Description unit
1013719 - 32 Uponor pipe cutter up to 32 mm 1 pcs
1013721 Uponor spare blade for pipe cutter 1 pcs
Uponor pipe cutter up to 20For Uponor pipes, outside diameter up to 20 mm with corrugated pipe cutting device.
Item no. d [mm] Description unit
1006636 - 20 Uponor pipe cutter up to 20 mm 1 pcs
1006637 Uponor spare bladefor pipe cutter 1006636 1 pcs
Uponor pipe cutting tool 25-63For Uponor pipes, outside diameter 25-63 mm.
Item no. d [mm] Description unit
1006634 25-63 Uponor pipe cutting tool 25-63 mm 1 pcs
1006635 25-63 Uponor spare blade 25-63 mmfor pipe cutting tool item no. 1006634 1 pcs
Uponor pipe cutting tool 50-75For Uponor pipes, outside diameter 50-75 mm.
Item no. d [mm] Description unit
1014171 50-75 Uponor pipe cutting tool 50-75 mm 1 pcs
1014173 50-75 Uponor spare blade 50-75 mmfor pipe cutting tool item no. 1014171 1 pcs
Uponor toolkit 63-110Consisting of pipe cutting tool with bevelling device for pipes with outer diameter from 63-110 mm. Supplied in a tool case.
Item no. Description unit
1014334 Uponor pipe cutting tool a. deburrer MLC63-110 mm 1 pcs
EEI-Int-MLC-03.10 37
Uponor MLCP plumbing system > Uponor tools
Uponor bevelling tools
Uponor bevelling tool MLCFor de-studding the Uponor MLC pipes. Supplied with manual toggle. Without manual toggle to be used as attachment for self-driving screw with tapping screw thread.
Item no. d [mm] Description unit
1006830 16 Uponor bevelling tool MLC 16 1 pcs
1015743 18 Uponor bevelling tool MLC 18 1 pcs
1015749 20 Uponor bevelling tool MLC 20 1 pcs
1015756 25 Uponor bevelling tool MLC 25 1 pcs
1015762 32 Uponor bevelling tool MLC 32 1 pcs
Uponor bevelling tool MLCFor de-studding the Uponor MLC pipes. Supplied with manual toggle. Without manual toggle to be used as attachment for self-driving screw with tapping screw thread.
Item no. d [mm] Description unit
1006638 40 Uponor bevelling tool MLC 40 1 pcs
1015808 50 Uponor bevelling tool MLC 50 1 pcs
1014339 63 Uponor bevelling tool MLC 63 1 pcs
1014344 75 Uponor bevelling tool MLC 75 1 pcs
Uponor bevelling tool 3-size MLCFor bevelling of Uponor MLC pipes with outer diameters up to 25 mm.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1015739 16 20 25 Uponor bevelling tool 3-size MLC16/20/25 1 pcs
Uponor bending tools
Uponor inside bending spring MLCSpecial bending spring for Uponor MLC pipe.
Item no. d [mm] Description unit
1013729 16 Uponor bending spring inside MLC 16 1 pcs
1013732 18 Uponor bending spring inside MLC 18 1 pcs
1013734 20 Uponor bending spring inside MLC 20 1 pcs
1013737 25 Uponor bending spring inside MLC 25 1 pcs
1013739 32 Uponor bending spring inside MLC 32 1 pcs
EEI-Int-MLC-03.1038
Uponor MLCP plumbing system > Uponor tools
Uponor bending tools
Uponor outside bending spring MLCSpecial bending spring for Uponor MLC pipe.
Item no. d [mm] Description unit
1006640 16 Uponor bending spring outside MLC 16 1 pcs
1013790 18 Uponor bending spring outside MLC 18 1 pcs
1013792 20 Uponor bending spring outside MLC 20 1 pcs
1013794 25 Uponor bending spring outside MLC 25 1 pcs
Uponor bending tool MLCFor producing evenly formed bends in Uponor MLC pipes with outer diameters up to 32 mm. Delivered complete in tool case with bending segments.
Item no. d [mm] Description unit
1013773 16-32 Uponor bending tool MLC 16-32 1 pcs
Uponor pressing tools
Uponor manual pressing tool MLCFor pressing of Uponor press fi ttings MLC 14-20 mm in conjunction with exchangeable inserts. Supplied in case without exchangeable inserts.
Item no. d [mm] Description unit
1015764 14-20 Uponor manual press tool MLC 14-20incl. case without pressing inserts 1 pcs
Uponor manual pressing tool inserts MLCFor inserting into the manual pressing tool for pressing the Uponor press fi ttings MLCP 14/16/18/20 mm.
Item no. d [mm] Description unit
1015777 16 Uponor manual press tool insert MLC 16 1 set
1015779 18 Uponor manual press tool insert MLC 18 1 set
1015780 20 Uponor manual press tool insert MLC 20 1 set
EEI-Int-MLC-03.10 39
Uponor MLCP plumbing system > Uponor tools
Uponor pressing tools
Uponor press toolkit battery Mini 32Supplied in plastic case including battery and charger unit and pressing jaws for the dimensions 16/20/25/32. Range of application up to 32 mm. Technical Specifi cations: Weight of the pressing machine, incl. pressing jaw: 2.5 kgMotor voltage: 9.6 V DCCharging voltage: 9.6 VCharge status indicator: optical display of battery Charging time: ca. 40 min.For dimensions: up to 32 mmPressing time: ca. 4 secCapacity: ca. 65 pressings with dimension 20 per fully charged battery.
Item no. d [mm] OV [V] Description unit
1007096 - 32 9.6 Uponor battery pressing tool Mini 32with pressing jaws 16/20/25/32 KSP0 1 pcs
Uponor spare rechargeable battery MiniBattery: 9.6V for Uponor battery pressing tool Mini 32.
Item no. OV [V] Description unit
1015703 9.6 Uponor spare recharg. battery Mini 32 1 pcs
Uponor pressing jaws mini MLC KSP0Uponor pressing jaws MLC mini KSP0 für Uponor press fi ttings up to 32 mm.
Item no. d [mm] Description unit
1007091 16 Uponor pressing jaws MLC Mini 16 KSP0 1 pcs
1007092 18 Uponor pressing jaws MLC Mini 18 KSP0 1 pcs
1007093 20 Uponor pressing jaws MLC Mini 20 KSP0 1 pcs
1007094 25 Uponor pressing jaws MLC Mini 25 KSP0 1 pcs
1007095 32 Uponor pressing jaws MLC Mini 32 KSP0 1 pcs
Uponor press tool electric UP 75Supplied in plastic case for the 230 V mains connection, without pressingjaws. Range of application up to 110 mm.Technical Specifi cations:Weight of the pressing tool: 3.30 kgNominal voltage: 230 V DC / 50 HzNominal capacity: 200 WattFor dimensions: up to 110 mmPress power: ca. 32 kNPress duration: ca. 7 sec.
Item no. d [mm] OV [V] Description unit
1007082 - 110 230 Uponor electric pressing tool UP 75 ELwithout pressing jaws 1 pcs
EEI-Int-MLC-03.1040
Uponor MLCP plumbing system > Uponor tools
Uponor pressing tools
Uponor press tool battery UP 75Supplied in plastic tool case including an accumulator and a charging device, without pressing jaws. Application fi eld for dimensions up to 110 mm. Technical Specifi cations: Weight of the pressing machine: 3.95 kg Motor voltage: 12 V DC Charging voltage: 12 V Charge status indicator: Optical display accumulator Charging time: ca. 1 hr., or ¼ hr. with fast charger for dimensions: up to 110 mm Press capacity: ca. 32 kN Press duration: ca. 7 sec. Output: ca. 220 pressings with dimension 20 per fully charged battery
Item no. d [mm] OV [V] Description unit
1006827 - 110 12 Uponor battery pressing tool UP 75without pressing jaws 1 pcs
Uponor spare recharcheable battery UP 75Suitable for the battery powered pressing machine UP 75.
Item no. OV [V] Description unit
1006949 12 Uponor spare rechargeable battery UP 75 1 pcs
Uponor spare charger unit UP 75Suitable for the re-chargeable battery of the pressing machine UP 75 and mini 32.
Item no. OV [V] Description unit
1006950 230 Uponor spare charger unit UP 75/mini 32 1 pcs
Uponor pressing jaws MLC KSP0Uponor pressing jaws for Uponor MLC press fi ttings up to 32 mm.
Item no. d [mm] Description unit
1007084 16 Uponor pressing jaws MLC 16 KSP0 1 pcs
1007085 18 Uponor pressing jaws MLC 18 KSP0 1 pcs
1007086 20 Uponor pressing jaws MLC 20 KSP0 1 pcs
1007087 25 Uponor pressing jaws MLC 25 KSP0 1 pcs
1007088 32 Uponor pressing jaws MLC 32 KSP0 1 pcs
Uponor pressing jaws MLCUponor pressing jaws for Uponor MLC press fi ttings 40-50 mm.
Item no. d [mm] Description unit
1015768 40 Uponor pressing jaws MLC 40 1 pcs
1015792 50 Uponor pressing jaws MLC 50 1 pcs
EEI-Int-MLC-03.10 41
Uponor MLCP plumbing system > Uponor tools
Uponor pressing tools
Uponor modular pressing unit MLCPressing chain for Uponor MLC press fi ttings 63 - 110 in conjunction with the base unit and the pressing tool UP 75 and UP 75 EL.
Item no. d [mm] Description unit
1046541 63 Uponor pressing chain MLC 63 1 pcs
1046542 75 Uponor pressing chain MLC 75 1 pcs
Uponor modular pressing unit MLCPressing chain for Uponor MLC press fi ttings 63 - 110 in conjunction with the base unit and the pressing tool UP 75 and UP 75 EL.
Item no. d [mm] Description unit
1046543 90 Uponor pressing chain MLC 90 1 pcs
1046544 110 Uponor pressing chain MLC 110 1 pcs
Uponor modular base unit MLCBase unit for the pressing chain to press Uponor MLC press fi ttings 63 - 110 in conjunction with the pressing tool UP 75 and UP 75 EL.
Item no. d [mm] Description unit
1046545 63-110 Uponor base unit 63 -110 1 pcs
EEI-Int-MLC-03.1042
Uponor MLCP plumbing system > Uponor tools
Uponor accessories
Uponor pipe uncoiler with pipe guideFor laying of all Uponor pipes up to dimension 25 mm. Suits different pipe coils with 300 mm and 600 mm internal diameter.
Item no. Description unit
1035807 Uponor pipe uncoiler with pipe guide 1 pcs
Uponor pipe straightener MLCFor simple and quick straightening of the Uponor MLC pipes. Adjustable for the Uponor MLC pipes up to 25 mm.The pipe straightener is not compatible with the Uponor uncoiler. Fixing has to be managed on site.
Item no. Description unit
1010512 Uponor pipe straightener MLC 1 pcs
Uponor bending tool for mounting trackFor producing evenly formed, correctly angled bends in the 2 meter long mounting track.
Item no. Description unit
1015424 Uponor bending tool f. 2m mounting track 1 pcs
Uponor pressure test plug MLC up to 40Re-usable plug for pressure test of installations, screwed into bevelled pipe. After completion of the pressure test unscrew the pressure test plug out of the pipe and cut it to the required length (length of plug + 1.5mm).
Item no. d [mm] FT [”] Description unit
1013756 16 ½ Uponor pressure test plug MLC 16 10 pcs
1013760 20 ½ Uponor pressure test plug MLC 20 10 pcs
1013762 25 ½ Uponor pressure test plug MLC 25 10 pcs
1013764 32 ½ Uponor pressure test plug MLC 32 5 pcs
1013765 40 ½ Uponor pressure test plug MLC 40 2 pcs
EEI-Int-MLC-03.10 43
Uponor MLCP plumbing system > Uponor tools
Uponor accessories
Uponor press stop end MLCMade of tin-plated brass, with fi xed press sleeve.
Item no. d [mm] Description unit
1007078 16 Uponor press stop end MLC 16 10 pcs
1007079 20 Uponor press stop end MLC 20 10 pcs
1007080 25 Uponor press stop end MLC 25 10 pcs
1007081 32 Uponor press stop end MLC 32 5 pcs
EEI-Int-MLC-03.1044
Uponor MLCP plumbing system > International sales and delivery terms
International sales and delivery terms
EEI-Int-MLC-03.10 45
1 Interpretation
2 Basis of the sale
3 Orders and specifications
4 Price of Goods
5 Terms of payment
6 Delivery and Performance
Uponor MLCP plumbing system > International sales and delivery terms
International sales and delivery terms
EEI-Int-MLC-03.1046
7 Risk and property
8 Liability
9 Insolvency of Buyer
10 Packing
11 General
Uponor MLCP plumbing system > Item search register
Item search register
EEI-Int-MLC-03.10 47
Item no. unit Page
1006634 pcs 37
1006635 pcs 37
1006636 pcs 37
1006637 pcs 37
1006638 pcs 38
1006640 pcs 39
1006641 pcs 20
1006827 pcs 41
1006830 pcs 38
1006949 pcs 41
1006950 pcs 41
1007077 pcs 33
1007078 pcs 44
1007079 pcs 44
1007080 pcs 44
1007081 pcs 44
1007082 pcs 40
1007084 pcs 41
1007085 pcs 41
1007086 pcs 41
1007087 pcs 41
1007088 pcs 41
1007091 pcs 40
1007092 pcs 40
1007093 pcs 40
1007094 pcs 40
1007095 pcs 40
1007096 pcs 40
1010512 pcs 43
1011370 pcs 35
1011371 pcs 35
1011372 pcs 35
1011373 pcs 35
1012858 m 8
1012859 m 8
1012860 m 8
1012862 m 8
1012863 m 8
1012864 m 8
1012866 m 8
1012867 m 8
1012869 m 8
1012872 m 8
1012877 pcs 34
1012878 pcs 34
1012879 pcs 34
1012880 pcs 34
1012881 pcs 34
1012882 pcs 34
1012883 pcs 34
1012884 pcs 34
1012885 pcs 34
1012886 pcs 34
1012887 pcs 34
1012913 set 34
Item no. unit Page
1013134 pcs 33
1013137 pcs 36
1013138 pcs 36
1013139 pcs 36
1013140 pcs 36
1013142 pcs 36
1013144 pcs 36
1013145 pcs 36
1013146 pcs 36
1013147 pcs 36
1013371 m 6
1013378 m 6
1013380 m 6
1013383 m 6
1013388 m 6
1013392 m 6
1013398 m 6
1013400 m 6
1013401 m 6
1013432 m 6
1013438 m 6
1013442 m 6
1013444 m 6
1013446 m 6
1013449 m 6
1013451 m 6
1013453 m 6
1013455 m 6
1013457 m 6
1013578 m 6
1013623 m 6
1013624 m 6
1013625 m 7
1013626 m 7
1013627 m 7
1013628 m 7
1013629 m 7
1013630 m 7
1013719 pcs 37
1013721 pcs 37
1013729 pcs 38
1013732 pcs 38
1013734 pcs 38
1013737 pcs 38
1013739 pcs 38
1013756 pcs 43
1013760 pcs 43
1013762 pcs 43
1013764 pcs 43
1013765 pcs 43
1013773 pcs 39
1013790 pcs 39
1013792 pcs 39
1013794 pcs 39
1013830 pcs 32
Item no. unit Page
1013832 pcs 20
1013846 pcs 20
1013854 pcs 20
1013894 pcs 20
1013906 pcs 32
1013907 pcs 20
1013914 pcs 20
1013932 pcs 21
1013946 pcs 21
1013970 pcs 33
1013978 pcs 33
1013989 pcs 20
1013998 pcs 20
1014004 pcs 20
1014011 pcs 20
1014107 pcs 30
1014109 pcs 30
1014111 pcs 30
1014117 pcs 30
1014120 pcs 30
1014121 pcs 30
1014122 pcs 34
1014123 pcs 30
1014137 pcs 30
1014138 pcs 30
1014139 pcs 30
1014143 pcs 20
1014145 pcs 20
1014147 pcs 21
1014171 pcs 37
1014173 pcs 37
1014334 pcs 37
1014339 pcs 38
1014344 pcs 38
1014525 pcs 12
1014534 pcs 12
1014536 pcs 12
1014540 pcs 12
1014546 pcs 12
1014549 pcs 12
1014551 pcs 12
1014561 pcs 12
1014564 pcs 12
1014567 pcs 12
1014574 pcs 12
1014577 pcs 12
1014580 pcs 12
1014589 pcs 12
1014592 pcs 12
1014599 pcs 12
1014602 pcs 12
1014610 pcs 12
1014613 pcs 12
1014618 pcs 12
1014621 pcs 12
Item no. unit Page
1014624 pcs 12
1014628 pcs 12
1014630 pcs 12
1014633 pcs 12
1014636 pcs 12
1014639 pcs 12
1014641 pcs 12
1014679 pcs 13
1014686 pcs 13
1014692 pcs 14
1014704 pcs 13
1014709 pcs 13
1014713 pcs 13
1014716 pcs 14
1014719 pcs 14
1014724 pcs 13
1014729 pcs 13
1014732 pcs 13
1014736 pcs 14
1014739 pcs 14
1014746 pcs 13
1014751 pcs 13
1014755 pcs 13
1014757 pcs 14
1014761 pcs 14
1014765 pcs 13
1014770 pcs 13
1014774 pcs 14
1014779 pcs 13
1014783 pcs 13
1014786 pcs 14
1014791 pcs 13
1014794 pcs 14
1014812 pcs 14
1014825 pcs 14
1014836 pcs 14
1014848 pcs 14
1014918 pcs 15
1014923 pcs 16
1014927 pcs 17
1014931 pcs 17
1014935 pcs 16
1014938 pcs 16
1014941 pcs 16
1014944 pcs 15
1014954 pcs 17
1014957 pcs 16
1014961 pcs 16
1014966 pcs 16
1014968 pcs 16
1014970 pcs 16
1014974 pcs 16
1014976 pcs 15
1014981 pcs 16
1014983 pcs 16
Item no. unit Page
1014987 pcs 17
1014991 pcs 17
1014996 pcs 16
1015000 pcs 16
1015002 pcs 16
1015007 pcs 16
1015011 pcs 16
1015015 pcs 16
1015017 pcs 16
1015021 pcs 16
1015028 pcs 15
1015033 pcs 16
1015038 pcs 17
1015044 pcs 17
1015048 pcs 17
1015053 pcs 16
1015057 pcs 16
1015060 pcs 16
1015064 pcs 16
1015068 pcs 16
1015073 pcs 15
1015078 pcs 16
1015082 pcs 17
1015088 pcs 17
1015091 pcs 17
1015096 pcs 16
1015100 pcs 16
1015103 pcs 16
1015107 pcs 16
1015111 pcs 16
1015116 pcs 15
1015123 pcs 17
1015131 pcs 16
1015134 pcs 16
1015138 pcs 16
1015142 pcs 16
1015146 pcs 15
1015149 pcs 17
1015164 pcs 17
1015172 pcs 18
1015176 pcs 17
1015179 pcs 18
1015185 pcs 18
1015187 pcs 17
1015194 pcs 18
1015199 pcs 18
1015202 pcs 18
1015205 pcs 17
1015215 pcs 18
1015217 pcs 18
1015219 pcs 17
1015230 pcs 18
1015233 pcs 18
1015236 pcs 18
1015242 pcs 18
Item no. unit Page
1015245 pcs 18
1015248 pcs 18
1015270 pcs 18
1015274 pcs 18
1015277 pcs 18
1015280 pcs 18
1015283 pcs 18
1015286 pcs 18
1015295 pcs 18
1015297 pcs 18
1015301 pcs 18
1015304 pcs 19
1015309 pcs 19
1015314 pcs 19
1015385 pcs 29
1015392 pcs 28
1015401 pcs 28
1015403 pcs 28
1015405 pcs 28
1015424 pcs 43
1015425 pcs 32
1015442 pcs 25
1015455 pcs 25
1015460 pcs 26
1015469 pcs 25
1015473 pcs 25
1015476 pcs 26
1015479 pcs 25
1015486 pcs 25
1015491 pcs 25
1015498 pcs 25
1015512 pcs 25
1015515 pcs 25
1015523 pcs 25
1015539 pcs 29
1015553 pcs 27
1015559 pcs 27
1015560 pcs 27
1015572 pcs 26
1015626 pcs 32
1015628 pcs 32
1015631 pcs 32
1015634 pcs 33
1015636 pcs 26
1015643 pcs 32
1015653 pcs 32
1015659 pcs 33
1015661 pcs 33
1015663 pcs 33
1015703 pcs 40
1015739 pcs 38
1015743 pcs 38
1015749 pcs 38
1015756 pcs 38
1015762 pcs 38
EEI-Int-MLC-03.1048
Uponor MLCP plumbing system > Item search register
Item search register
Uponor MLCP plumbing system > Item search register
Item search register
Item no. unit Page
1015764 pcs 39
1015768 pcs 41
1015777 set 39
1015779 set 39
1015780 set 39
1015792 pcs 41
1015808 pcs 38
1022714 pcs 9
1022715 pcs 9
1022716 pcs 9
1022717 pcs 9
1022718 pcs 9
1022719 pcs 9
1022720 pcs 9
1022721 pcs 9
1022722 pcs 10
1022723 pcs 10
1022724 pcs 10
1022725 pcs 10
1022726 pcs 10
1022727 pcs 10
1022728 pcs 10
1022729 pcs 10
1022730 pcs 10
1022731 pcs 10
1022732 pcs 10
1022733 pcs 10
1022734 pcs 10
1022735 pcs 10
1022736 pcs 11
1022737 pcs 11
1022738 pcs 11
1022739 pcs 11
1022740 pcs 11
1022741 pcs 11
1022742 pcs 11
1022743 pcs 11
1029121 pcs 23
1029122 pcs 23
1029123 pcs 23
1029124 pcs 23
1029125 pcs 23
1029126 pcs 23
1029127 pcs 23
1029128 pcs 23
1029129 pcs 23
1029130 pcs 23
1029131 pcs 23
1029132 pcs 23
1029133 pcs 23
1029134 pcs 23
1029135 pcs 23
1029136 pcs 23
1029137 pcs 23
1029138 pcs 22
Item no. unit Page
1029139 pcs 22
1029140 pcs 22
1029141 pcs 22
1029142 pcs 22
1029143 pcs 22
1029144 pcs 22
1029145 pcs 22
1029146 pcs 22
1029147 pcs 24
1035807 pcs 43
1042921 pcs 24
1042922 pcs 24
1042923 pcs 24
1042924 pcs 24
1042925 pcs 24
1042926 pcs 24
1042927 pcs 24
1042928 pcs 24
1045451 set 31
1046386 pcs 9
1046387 pcs 9
1046388 pcs 9
1046389 pcs 9
1046390 pcs 10
1046391 pcs 10
1046392 pcs 10
1046393 pcs 10
1046394 pcs 10
1046395 pcs 10
1046396 pcs 10
1046397 pcs 10
1046398 pcs 10
1046399 pcs 10
1046400 pcs 10
1046401 pcs 11
1046402 pcs 11
1046403 pcs 11
1046404 pcs 11
1046405 pcs 11
1046406 pcs 11
1046477 pcs 24
1046478 pcs 24
1046541 pcs 42
1046542 pcs 42
1046543 pcs 42
1046544 pcs 42
1046545 pcs 42
1046750 pcs 24
1046751 pcs 24
EEI-Int-MLC-03.10 49
Uponor MLCP plumbing system > Item search register
Item search register
Notices
EEI-Int/EN-HC-03.1050
51
How to contact us
Customer Service Center T + 49 (0)9521-690-370
F +49 (0)9521-690-750
Technical assistance T +49 (0)9521-690-739 or 834
F +49 (0)9521-690-750
Export Department T +49 (0)9521-690-370
F +49 (0)9521-690-750
We reserve the right to make technical amendments and carry out updates.
1022
763
– 03
/201
0 –
Subj
ect
to m
odifi
catio
ns
Uponor – partnering with professionals
Uponor is a leading supplier of plumbing and heating systems for the residential and commercial building markets across Europe and North America, and a market leader in municipal infrastructure pipe systems in the Nordic countries. Uponor's key applications include indoor climate and plumbing systems.
Uponor International Sales takes care of all business activities in the Balkans, Western, Central and East Asia, Africa and Latin America.
Uponor. Simply more.
Uponor GmbHP.O. Box 164197433 HassfurtGermanyT +49-(0)9521 690 0F +49-(0)9521 690 750E [email protected] www.uponor.com/international
