A Safe Drain is No Accident™
P 877-768-2717 F 877-276-POOL Outside the US: P +1-805-620-5060 F +1-949-336-1940 [email protected] www.aquastarpoolproducts.com
PROUDLY MADEIN THE USA
16" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 12" Square Retro-Adapter Frame
FeaturesFor single or multiple drain use (see installation instructions)
Requires a minimum 3" sump depth
Single Floor: 460 GPM at 1.46 fps Wall: 445 GPM at 1.4 fps
101 square inch opening
Frame easily and safely retrofits most brands’ existing 12" frame* with epoxy or screws or both; cover anchors into in-molded brass inserts in frame with four fine thread machine screws
Ideal for retrofitting over all existing sumps/frames up to 15" by anchoring directly into pool finish (plaster, tile, fiberglass, etc.) using four brass anchors and stainless screws in kit #BIK4
Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater
#316 stainless steel screws
Manufactured from superior UV-resistant engineered polymers
All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure
8 per case
Part # 1216xxx
1. 16" x 16" anti-entrapment suction outlet cover2. 12" to 16" square conversion frame 3. 12"x12" square drain frame 4. 10-32 x 1" pan head phillips machine screw, 316ss 5. #10 x 3/4" flat head phillips type-a screw, 316ss
9-21/32
9-21/32
7/32
15-3/16
15-3/16
16-11/32
16-11/32
2-21/32
5/16
1-3/4
5/16
13-17/32
11
11 1
2
4
5
3
VGB Series
*Fits: AquaStar (p/n 12xxx, pre-VGB “flat”); Pentair (#1 selling) with ¾" deep existing frames and four screw hole pattern, use R1216xxx
for 1" deep frames (Hayward, Waterway, American Pre-fab, CMP)
Optional – extra screw holes for anchoring directly into pool finish us-ing four brass anchor kit part # BIK4
Retrofits over all existing sumps/frames up to 15"
Mud frame Retro-adapter frame
The AquaStar line of suction outlet covers, compliant with the new
Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
VGB 2008 Compliant
101
STANDARD COLORS
OPTIONAL COLORS
102
103
104
105
106
108
107
4-1/4
1-1/42-7/32
13-9/16
2-1/2" spigot 2" socket.154 min.
1-7/8
29/32
1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump2. 10" round flat grate (optional)3. 12" to 16" A.Q. conversion frame4. 16" x 16" drain cover5. 10-32 x 1" pan head phillips screw, 316 ss, qty 46. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 67. 2" tapered pipe thread plug
2" NPT 2
7
6
1
4
3
5
Part # 1216xxxB1 per case
4-1/4
1-7/829/32
1. 12" square double- deep frame2. 10" round flat grate (optional)3. 12" to 16" A.Q. conversion frame4. 16" x 16" drain cover5. 10-32 x 1" pan head phillips screw, 316 ss, qty 46. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 6
1
2
6
4
3
5
Part # 1216xxxA2 per case
AdditionAl PRodUCt ConFiGURAtionS FoR 1216xxx
4-1/41-7/8
4" spigot.237 min.
1-7/8
13-3/32
29/32
1. 4" spigot deep PVC sump2. 10" round flat grate (optional)3. 12" to 16" A.Q. conversion frame4. 16" x 16" drain cover5. 10-32 x 1" pan head phillips screw, 316 ss, qty 46. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 6
2 6
4
3
5
1
Part # 1216xxxC1 per case
4-1/41-7/8
6" socket
3-1/8
.280 min.
13-1/2
29/32
1. 6" socket deep PVC sump2. 10" round flat grate (optional)3. 12" to 16" A.Q. conversion frame4. 16" x 16" drain cover5. 10-32 x 1" pan head phillips screw, 316 ss, qty 46. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 6
2 6
4
3
5
1
Part # 1216xxxF1 per case
4-1/4 1-7/8
13-3/32
4" socket.237 min.
1-7/8
29/32
1. 4" socket deep PVC sump2. 10" round flat grate (optional)3. 12" to 16" A.Q. conversion frame4. 16" x 16" drain cover5. 10-32 x 1" pan head phillips screw, 316 ss, qty 46. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 6
2
6
4
3
5
1
Part # 1216xxxD1 per case
4-1/4 1-7/8
13-1/2
6" spigot.280 min.
3-3/32
29/32
1. 6" spigot deep PVC sump2. 10" round flat grate (optional)3. 12" to 16" A.Q. conversion frame4. 16" x 16" drain cover5. 10-32 x 1" pan head phillips screw, 316 ss, qty 46. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 6
2 6
4
3
5
1
Part # 1216xxxE1 per case
Features: Sump Buckets for 1216xxxFor single or multiple drain use (see installation instructions)
#316 stainless steel screws
Manufactured from superior UV-resistant engineered polymers
All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure
Sold with 1216xxx, not sold separately
dual-Port 2½" Spigot x 2" Socket deep PVC Sumpdouble-deep Sump
4" Spigot deep PVC Sump
6" Spigot deep PVC Sump 6" Socket deep PVC Sump
4" Socket deep PVC Sump