2012 Catalog-phase II (1)

For orders, returns, parts, or quotes, contact ourCustomer Service Department• All our customer service representatives have

on-line access to prices and inventory informa-tion.

• Parts available for 99% of our products.For repairs and technical assistance contact ourService Department• Our technical and product support depart-

ment can assist you with difficult applicationproblems and offer you trouble-shooting tech-niques.

Service and QualityTHE PHASE II ADVANTAGE:Top Quality ProductsPhase II offers only top quality products. Eachnew product passes a quality control checklist. wemake sure our products live up to the high qualitystandards you have come to expect.Free Technical AssistanceOur customer service representatives can answeryour questions about our products, offer adviceand recommend the proper accessories to com-plete your requests.

Monday through Friday8:30 AM - 5:30 PM (EST)24-hour fax(201)962-8353Phase II Machine & Tool, Inc.21 Industrial Ave.Upper Saddle River, NJ. 07458 USATel: (201) 962-7373Fax: (201) 932-8353General E-Mail: [email protected]

We accept Visa, MasterCard, DiscoverPrices: F.O.B. New Jersey unless advised other-

wise. Minimum order is $50 net.Terms: Net 30 days, unless otherwise agreed

upon in writing.

New Accounts: Three (3) trade references and abank reference are required to open an account.Visa, MasterCard and Discover are accepted. Ifimmediate delivery is required, please include acheck with your order, allow for COD shipmentor charge to credit card.Claims: Must be made within 5 days after receiptof merchandise. If it is a truck shipment, makesure the damage or short shipment is noted onthe delivery receipt. Without proper notation, youaccept it at your own risk.Returns: All Phase II products must have authori-zation prior to return.If product is not acceptable for any reason includ-ing application issues and demonstrations, author-ization for return must be obtained within 10days of receipt of product. Unit must be in samenew condition it was received. Failure to do sowill result in an automatic 15% restocking fee.Returns after 30 days will not be accepted.Guarantee: Phase II unconditionally guaranteesitems purchased, against manufacturer defect.Liability: The value of the defective item(s) is thelimit of our liability. All technical information hasbeen supplied by the manufacturer for your con-venience only. We do not warrant or representthat the merchandise complies with the provisionsof any law—particularly the Walsh-Healey PublicContracts Act and the OSHA of 1970 and theregulations promulgated thereunder—unless themanufacturer so warrants. Dimensions may bechanged without notice at the discretion of themanufacturer.Orders: We ship 98% of our orders within 24hours.Phase II not responsible for typographical errors.

The Source of Quality

Call Today!201-962-7373

www.phase2plus.com

Portable Hardness TestingUltrasonic Hardness Tester-MET-U1A . . . . . . . . . . .2 & 3

New! Mini Ultrasonic Hardness Testers . . . . . . . . . . . .4

Digital Hardness Tester-PHT-1800 . . . . . . . . . . . . . . . .5

New! Portable Hardness Tester w/Printer/PHT-3500 .6

New! Economy Hardness Tester PHT-1700 . . . . . . . . .7

New! PDA style Hardness Tester PHT-3000 . . . . . . . . .8

Portable Hardness Tester PHT-2500 . . . . . . . . . . . . . .9

Hardness Tester w/Printer PHT-4000 . . . . . . . . . . . .10

New! Gear Teeth Hardness Testers . . . . . . . . . . . . . .11

Accessories for Portable hardness testers . . . . . . . . . .12

Leeb Test Blocks & Impact Device Specifications . . . . . .13

Bench Top Hardness TestersRockwell Hardness Tester 900-331 . . . . . . . . . . . . . . .14

Superficial Rockwell Hardness tester 900-340 . . . . . . .15

Digital Rockwell hardness tester 900-360 . . . . . . . . . .16

TWIN Digital Hardness tester 900-370 . . . . . . . . . . .17

Digital Brinell Hardness tester 900-352 . . . . . . . . . . .18

Hardness Tester Accessories . . . . . . . . . . . . . . . . . . . .19

Specialized Hardness Testers(Coatings, Rubbers, plastics)Digital Shore Durometers PHT-950 & PHT-975 . . . . . .20

New! Digital Shore Durometers . . . . . . . . . . . . . . . .21

Coating Hardness Tester PHT-995 . . . . . . . . . . . . . . .22

Surface Roughness GaugesHand Held Surface roughness Gauge SRG-1000 . . . . .23

New! Portable Surface Roughness Gauge SRG-4000 . .24

Ultrasonic Wall Thickness GaugesUltrasonic Thickness Gauge UTG-1500 . . . . . . . . . . . .25

Ultrasonic Thickness Gauge UTG-2800 . . . . . . . . . . . .26

Ultrasonic Thickness Gauge w/Thru Coating UTG-2600 27

New! Ultrasonic Thickness Gauge UTG-2650 . . . . . . .28

Ultrasonic Thickness Gauge UTG-2000/2020 . . . . . . .29

Accessories for Ultrasonic Gauges . . . . . . . . . . . . . . .30

Coating Thickness GaugesIntegrated Coating Thickness GaugePTG-3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

New! Coating Thickness Gauges . . . . . . . . . . . . . . . .32

Force Gauges (Push/Pull)New! Analog Force Gauge w/Dual scale readout . . . .33

New! Digital Force Gauge w/tri scale readout . . . . . .34

Test Stand for above force gauges . . . . . . . . . . . . . . .35

Visual InspectionRigid Borescopes RGB-1000&1700 . . . . . . . . . . . . . .36

Vibration TestingVibration Meter DVM-1000 . . . . . . . . . . . . . . . . . . . .37

Phase II Machine & Tool, Inc.21 Industrial Ave.

Upper Saddle River, NJ. 07458 USATel: (201) 962-7373Fax: (201) 962-8353

General E-Mail: [email protected]

www.Phase2Plus.com

Portable Hardness TestingUltrasonic Hardness Tester-MET-U1A . . . . . . . . . . .2 & 3

New! Mini Ultrasonic Hardness Testers . . . . . . . . . . . .4

Digital Hardness Tester-PHT-1800 . . . . . . . . . . . . . . . .5

New! Portable Hardness Tester w/Printer/PHT-3500 .6

New! Economy Hardness Tester PHT-1700 . . . . . . . . .7

New! PDA style Hardness Tester PHT-3000 . . . . . . . . .8

Portable Hardness Tester PHT-2500 . . . . . . . . . . . . . .9

Hardness Tester w/Printer PHT-4000 . . . . . . . . . . . .10

New! Gear Teeth Hardness Testers . . . . . . . . . . . . . .11

Accessories for Portable hardness testers . . . . . . . . . .12

Leeb Test Blocks & Impact Device Specifications . . . . . .13

Bench Top Hardness TestersRockwell Hardness Tester 900-331 . . . . . . . . . . . . . . .14

Superficial Rockwell Hardness tester 900-340 . . . . . . .15

Digital Rockwell hardness tester 900-360 . . . . . . . . . .16

TWIN Digital Hardness tester 900-370 . . . . . . . . . . .17

Digital Brinell Hardness tester 900-352 . . . . . . . . . . .18

Hardness Tester Accessories . . . . . . . . . . . . . . . . . . . .19

Specialized Hardness Testers(Coatings, Rubbers, plastics)Digital Shore Durometers PHT-950 & PHT-975 . . . . . .20

New! Digital Shore Durometers . . . . . . . . . . . . . . . .21

Coating Hardness Tester PHT-995 . . . . . . . . . . . . . . .22

Surface Roughness GaugesHand Held Surface roughness Gauge SRG-1000 . . . . .23

New! Portable Surface Roughness Gauge SRG-4000 . .24

Ultrasonic Wall Thickness GaugesUltrasonic Thickness Gauge UTG-1500 . . . . . . . . . . . .25

Ultrasonic Thickness Gauge UTG-2800 . . . . . . . . . . . .26

Ultrasonic Thickness Gauge w/Thru Coating UTG-2600 27

New! Ultrasonic Thickness Gauge UTG-2650 . . . . . . .28

Ultrasonic Thickness Gauge UTG-2000/2020 . . . . . . .29

Accessories for Ultrasonic Gauges . . . . . . . . . . . . . . .30

Coating Thickness GaugesIntegrated Coating Thickness GaugePTG-3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

New! Coating Thickness Gauges . . . . . . . . . . . . . . . .32

Force Gauges (Push/Pull)New! Analog Force Gauge w/Dual scale readout . . . .33

New! Digital Force Gauge w/tri scale readout . . . . . .34

Test Stand for above force gauges . . . . . . . . . . . . . . .35

Visual InspectionRigid Borescopes RGB-1000&1700 . . . . . . . . . . . . . .36

Vibration TestingVibration Meter DVM-1000 . . . . . . . . . . . . . . . . . . . .37

Neil

Sticky Note

Cancelled set by Neil

UCI Portable Hardness Testing MethodUltrasonic Contact Impedance is a hardness testing method based on the measurementof the frequency shift of a resonating rod caused by the essentially elastic nature of thefinite area of contact between the indenter and the test piece during the penetration.Described as a hardness testing practice using a calibrated instrument by pressing aresonating rod with a Vickers style Diamond indentor with a fixed force against thesurface of the part to be tested.

MET-U1A/MET-U1A50Standard Accessories:• Base Instrument• 15N (1.5kgf) Hand-Held Probe (MET-U1A)• 50N (5kgf) Hand-Held Probe (MET-U1A50)• Calibrated Rockwell Test Blocks (2pc)• Custom Carry Case• Battery Charger• Operation ManualFunctions:• Easy To Read Menu Operation• Large LCD Display w/ Back Light• USB Interface

• Automatic Reading to All scales including Brinell,Rockwell, Superficial Rockwell & Vickers

• Automatic Mean Value• Data Archive CapacitySpecifications:• Tolerance +/- 3%• Minimum Thickness of sample: .040”/1mm• Materials: steel & cast steel, alloy tool steel, stainless

steel, grey cast iron, spheroidal iron, cast aluminum,brass, bronze, wrought copper alloy.

• Battery type: NiMH Re-Chargeable (4xAA)• Operating temperature: 5-104 degrees F• Dimensions: 7.25” x 3.16” x 1.68” (HxWxD)• Weight: 1.7 lbs (UD)

Non-Destructive! • 50% Faster Test Time!

5 Year

Warranty

MET-U1A Ultrasonic Hardness Tester w/ 15N (1.5KG)Probe

MET-U1A50 Ultrasonic Hardness Tester w/50N (5KG) ProbeMET-1000 Precision Test StandThe PHASE II ultrasonic/dynamic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin orlarge surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, whichenables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it'sfunction, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normallylead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections.PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin orlarge surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument.The MET-U1A/U1A50 meets ASTM A1038-10 specifications.

UCI PROBE MEASUREMENT RANGE

Length 160mm

Diameter 25mm

Indentation DepthVaries with load andmaterial hardness

Pressure Force(MET-U1A) 1.5kgf

Pressure Force(MET-U1A50) 5kgf

Transducer Test Life (approx.) 200,000

Min Thickness for Test 1mm

Min Radius for Test 5mm

Max Roughness of Surface (Met-U1A) Ra 2.5µm

Max Roughness of Surface (Met-U1A) Ra 4.5µm

Max Archive 100 Tests

Time of Test 1.5 seconds

SCALES Material MEASUREMENT RANGE

Rockwell C Steel 20-70 HRC

Rockwell B Aluminum 59-99 HRB

Brinell Steel 75-650 HB

Vickers Steel 75-1000 HV

Pre-Programmed Scales/Material:Other combinations can be added upon request

5 Year

Warranty

MET-MINIDesigned to test specific material reading chosen scale, thenew PHASE II miniature ultrasonic hardness testers arecapable of measuring surface hardness of metals with flat,thin, round or large surfaces. Accurate measurements ofsteels and aluminum are easily attained with these com-pact instruments. "

Standard Accessories:• Base Instrument• Calibrated Test Blocks• Custom Carry Case• Battery Charger• Operation ManualSpecifications:• Easy To Read Menu Operation• Large LCD Display w/ Back Light• USB Interface• Automatic Mean Value• Data Archive Capacity

Specifications:Tolerance: +/- 3%Minimum Thickness of sample: .040”Materials: steel & cast steel, alloy toolsteel, stainless steel, aluminum, brass,bronze, wrought copper alloy.Battery type: NiMH Re-ChargeableOperating temperature: 5-104 degrees FWeight: 650g

Non-Destructive Hardness Testing!

New! Mini-MET’s

MODEL SCALES PRESSURE FORCE MEASUREMENT RANGE

MET-HRC15 Rockwell C 10N (1.5kgf) 20-70 HRC

MET-HRC50 Rockwell C 50N (5kgf) 20-70 HRC

MET-HB50 Brinell 50N (5kgf) 75-650 HB

MET-HB15 Vickers 10N (1.5kgf) 75-1000 HV

5 Year

Warranty

PHT-1800State of the art, digital tester is designed to test the hardness oflarge hard metal parts. Loaded with useful functions only found onhigh priced models the PHT-1800 is clearly setting a new industrystandard by being the most accurate, economically priced hardnesstester on the market today. Fast test speeds coupled with memoryand output, this unit is a hand’s down winner whether you are outin the field or in the QC shop. The PHT-1800 can perform tests thateasily convert to the most popular hardness scales, includingRockwell, Brinell, Vickers, Shore, etc.

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and

obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manualOptional accessories:• Impact devices; DC, D+15, DL, G, C• Special support rings• Mini PrinterFunctions:• Easy to use keypad operation• Auto identification of Impact Device• Large LCD display with back light

• USB Ouput• Automatic conversions to:

Brinell, Rockwell B & C,Vicker and Shore

• Automatic mean value as well as Min & Maxvalues• Battery Indicator• Memory capacity (100 groups)Functions:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron,• Spheroidal iron, cast aluminum, brass,

bronze, wrought copper alloy.• Battery type: AA alkaline (4)• Operating temperature: 5-104 degrees F• Dimensions: 150 x 74 x 32mm• Weight: 245 grams

5 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manualOptional accessories:• Impact devices; DC, D+15, DL, G, C• Special support rings

Functions:• Easy to use keypad operation• Auto identification of Impact Device• Large LCD display with back light• USB Ouput• Automatic conversions to: Brinell, Rockwell B & C,

Vicker and Shore• Automatic mean value as well as Min & Max values• Upper/Lower Limit Setting w/Alarm• Battery Indicator• Memory capacity (500 groups)Specifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL

• Minimum Thickness:< 0.5” (Steel)• Materials: steel & cast steel, alloy tool steel, stainless

steel, grey cast iron,• spheroidal iron, cast aluminum, brass, bronze, wrought

copper alloy.• Battery type: 6V NiMh Rechargeable• Battery charger: 9V/500mA• Continuous working periodÅFabout 150 hours

(With backlight off, no printing)• Printing paper: width is (57.5±0.5)mm,

diameter is 30mm• Communication interfaceÅFUSB1.1• Operating temperature: 5-104 degrees F• Dimensions: 212 x 80 x 32mm• Weight: 245 grams

The PHT-3500 can perform tests thateasily convert to the most popular

hardness scales, including Rockwell,Brinell, Vickers, Shore, etc.

PHT-3500State of the art, digital tester is designed to test the hardness of large hard metal parts. Loaded with useful functions and a built in mini-printer the PHT-3500 is clearly the industry leader for fast accurate hardness testing with advanced thermal printing capabilities.

5 Year

Warranty

PHT-3300The PHASE II hardness tester, Model No. PHT-3300 is an advanced integrated hardness tester distinguished by its very compact size, high accuracy, wide measuringrange and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry.

The PHT-3300 as with all Leeb hardness testers, is designed to test very large hard parts. Steel should be close to 1” thick of solid material. Softer metals need evenmore mass.

The PHT-3300 hardness tester combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers, Brinell, Rockwelland Shore hardness values. USB output enables this new model to print any of it’s memory from up to 500 groups. The impact direction can be set so that the accu-rate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.

The measuring method of the PHT-3300 is defined as “the quotient of the impact body’s rebound velocity over its impact velocity”. Optional accessories include var-ious support rings to meet the requirements of specialized convex or concave applications.

Technical Specifications:• Dimensions: 6.10” x 2.36” x 1.49” (155 X 60 X 38mm)• Impact Device: D• Impact Energy: 8 Ft-Lbs (11nmm)• Test Tip: Tungsten Carbide• Measuring Accuracy: +- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)• Max. Hardness Of Sample: 980hv• Weight: 0.48lb (220g)• Impact Direction: Any Angle• Operating Temperature: 32 To 122 Degrees F (0 To 50 Degrees C.)• Min. Weight Of Sample: 11 lbs / 5kg• Min. Radius Of Curved Surface: 1.2in (30mm) (With Support Rings:11mm)• Power Supply: 3.6V Lithium Rechargeable Battery

MEETS ASTM A956-06 SPECIFICATIONS

MATERIAL HRC HRB HB HV HS

STEEL & CAST STEEL 20-70 60-100 93-674 83-976 32-100

COLD TOOL STEEL 20-70 80-898

STAINLESS STEEL 20-70 46-100 85-655 85-802

GREY CAST IRON 93-334

NODULARCAST IRON

131-387

CASTALUMINUM ALLOYS

27-159

COPPER/ZINCALLOYS (BRASS)

13-95 40-173

CUAI/CUSN ALLOYS(BRONZE)

60-290

WROUGHTCOPPER ALLOYS

45-3155 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D (“DL” PHT-1740)• Calibrated test block• Custom carry case• Cleaning brush• Operation manualFunctions:• Easy to use push button operation• Large LCD display with back light• Automatic conversions to: Brinell, Rockwell, Vicker and Shore• Automatic mean value• Data storage capacitySpecifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel, stainless steel,

grey cast iron, spheroidal iron, cast aluminum, brass,bronze, wrought copper alloy.

• Battery type: AAA alkaline (2)• Operating temperature: 5-104 degrees F• Dimensions: 108 x 62 x 25mm• Weight: 230 grams

PHT-1700Loaded with features, this economically price hardness tester is capable of measuring the surfacehardness of a broad variety of metals on flat and round surfaces. This instrument comes com-plete with the universal D impact device, calibrated test block and rugged carry case.

PHT-1740Same base instrument as the PHT-1700 but comes supplied with the “DL” impact device fortesting of gear teeth, grooves and other confined applications. See page 13.

PHT-1750Same base instrument as the PHT-1700 but comes supplied with the "G" impact

device for testing of large castings and rough porous parts. See page 14.

5 Year

Warranty

PHT-3000This state of the art PDA style portable hardness tester is loaded with every useful feature you will ever needfor checking the hardness of metals. With its easy to use touch screen menu, this unit can quickly and accu-rately display hardness values, conversions, memory and any other important information needed.

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Infrared Mini-Printer• Impact device D• Calibrated test block• USB output Cable• A/C Adapter (usb)• Custom carry case• Cleaning brush• Operation manualFunctions:• Easy to use push button operation

• Large LCD display with back light• Automatic conversions to: Brinell, Rockwell C,

Rockwell B• Automatic mean value• Data storage capacity up to 800 groupsSpecifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron, spheroidal iron, castaluminum, wrought copper alloy.

• Battery type: AAA alkaline (2)• Operating temperature: 5-104 degrees F• Dimensions: 5.3” x 3.2” x 1.1”• Weight: 8.2oz.

5 Year

Warranty

Technical Specifications & Features:• Dimensions: 6.10” x 2.36” x 1.49”

(155 X 60 X 38mm)• Impact Device: D• Impact Energy: 8 Ft-Lbs (11nmm)• Test Tip: Tungsten Carbide• Measuring Accuracy: +- 0.8%

(Corresponding To +- 1 Hrc At Hrc=58)• Max. Hardness Of Sample: 980hv• Weight: 0.48lb (220g)• Impact Direction: Any Angle• Operating Temperature: 32 To 122 Degrees F (0 To 50 Degrees C.)• Min. Weight Of Sample: 11 lbs / 5kg• Min. Radius Of Curved Surface: 1.2in (30mm) (With Support Rings:11mm)• Power Supply: 4- AAA Battery

PHT-1500This PHASE II advanced hardness tester is distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable fortesting the hardness of all metals and widely applied in many areas of industry. The PHT-1500 is designed to test very large hard parts. Mass should be equivalentto approx. 1" thick of steel at point of test. Softer metals need even more mass.

The PHT-1500 hardness tester comes with the universal impact device D to provide the largest selection of applications. It automatically computes all Vickers, Brinell,Rockwell and Shore hardness values. The impact direction can be set so that the accurate values can be achieved at any angle, even upside down! Statistical meanvalue is automatically provided.

The measuring method of the PHT-1500 is defined as “the quotient of the impact body’s rebound velocity over its impact velocity”. Optional accessories includevarious support rings to meet the requirements of specialized convex or concave applications.

MATERIAL HRC HRB HB HV HSSteel & cast steel 20-68 60-100 93-674 83-976 32-100Cold tool steel 20-67 80-898Stainless steel 20-62 46-100 85-655 85-802Grey cast iron 93-334Nodular cast iron 131-387Cast aluminum alloys 27-159Copper/zinc alloys (brass) 13-95 40-173CuAI/CuSn alloys (bronze) 60-290Wrought copper alloys 45-315

The Phase II Tester PHT-1500 Comes Complete with a Calibrated Test Block, Rugged Carry Case and Operation Manual.

5 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingFunctions:• Easy to read menu operation• Large LCD display with

back light• RS 232 interface• Automatic conversions to: Brinell, Rockwell,

Vicker and Shore• Automatic mean value• Data storage capacity

Specifications:• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool

steel, stainless steel, greycast iron, spheroidal iron,cast aluminum, brass,bronze, wrought copperalloy.


Standard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manual• Protective Wrist BandOptional Accessories:• Micro printer• Impact devices; DC, D+15, DL, G, C• Special support rings• Printer cable

MATERIAL HRC HRB HB HV

STEEL & CAST STEEL 20-68 60-100 93-674 83-976

COLD TOOL STEEL 20-67 80-898

STAINLESS STEEL 20-62 46-100 85-655 85-802

GREY CAST IRON 93-334

NODULAR CAST IRON 131-387

CAST ALUMINUM ALLOYS 27-159

COPPER/ZINC ALLOYS (BRASS) 13-95 40-173

CuAI/CuSn ALLOYS (BRONZE) 60-290

WRAUGHT COPPER ALLOYS 45-315

Optional accessories include a 12pc set of Support ringsto meet the requirements of testing convex

or concave applications.

PHT-2500 Portable hardness testerState of the art, digital tester is a menu driven, multi-functional unit with extended memory and RS 232 output capabilities. This unit canperform tests that easily convert to every popular hardness scale, including Rockwell, Brinell, Vickers, Shore, etc. Protective leather wrist strapincluded! Simply put, it’s the most versatile, accurate, hardness tester on the market today! PHT-2550D comes supplied with Mini-Printer, PCCable, A/C Adapter and H/D Carry Case.

5 Year

Warranty

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Heavy Duty Rubber Casing w/Carry Strap• Custom carry case• Cleaning brush• Operation manual

Optional accessories:• Impact devices; DC, D+15, DL, G, C• Special support ringsFunctions:• Easy to read menu operation• Large LCD display with back light• USB Ouput• Automatic conversions to: Brinell, Rockwell,

Vicker and Shore• Automatic mean value as well as Min & Max values• Multi-Functional Data storage capacity

Specifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron, spheroidal iron, castaluminum, brass, bronze, wrought copper alloy.


FEATURES

PHT-4000 Portable Hardness TesterOur latest portable hardness tester is a direct result of our relentless pursuit to bring you the latest, State-Of-The-Art, WORLD-CLASS, portable hardness testers. This multi-functional instrument allows not only portability, but secure fixed positioning by a convenient flip stand mounted on the rear of the casing. Physically robust, the PhaseII PHT-4000 is designed and engineered to perform in the most rigorous of environments, all the while providing highly sensitive and accurate readings.

This portable hardness tester utilizes external probes, offering greater versatility when specialized applications arise. This is a decided advantage overintegrated/fixed probe style portable hardness testers.

Our industry leading interface enables users to easily manipulate multiple statistical and printing features all viewed on the large LCD screen. Lightning fastresults are easily obtained in Rockwell, Brinell, Vickers, Leeb, and Shore hardness scales.

Utilizing USB output, the PHT-4000 outputs directly to your pc, all the while charging your batteries. It also can send data directly to its built-in printer for quicktear attachments to your documents or reports.

5 Year

Warranty

PHT-1740This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1740 is an economically priced hardness tester that isloaded with the same features found on the base 1700 version. The 1740 hardness tester is capable of measuring the surface hardness of a broad varietyof metals on flat and round surfaces. This instrument comes complete with a dedicated DL impact device, calibrated test block and rugged carry case.

PHT-1840This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1840 is loaded with the same features found on the base1800 version which includes memory, USB output and software for downloading to your PC. The 1740 hardness tester is capable of measuring thesurface hardness of a broad variety of metals on flat and round surfaces. This instrument comes complete with a dedicated DL impact device, calibratedtest block and rugged carry case.

5 Year

Warranty

PHT-1750/1850Hardness Testing for Rough Surfaces

Incorporates the “G” impact device mated to the popular PHT-1700& 1800 portable hardness testers. This combination allows theuser to test large rough surface parts and readout in the Brinellhardness scale.

Designed to test large casting andother rough & porous parts

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingFunctions:• Easy to use keypad operation• Auto identification of Impact Device• Large LCD display with back light• Automatic mean value as well as Min & Max values• Battery Indicator• Memory capacity (100 groups)

Specifications:• Accuracy: +/- 0.5% (referred to L=800,• Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel, stainless

steel, grey cast iron, spheroidal iron, cast aluminum,brass, bronze, wrought copper alloy.

• Battery type: AA alkaline (4)• Operating temperature: 5-104 degrees F• Dimensions: 150 x 74 x 32mm• Weight: 245 grams

Standard Accessories:• Base instrument• Impact device G• Calibrated test block• Custom carry case• Cleaning brush• Operation manual

IMPACT DEVICE GIMPACT ENERGY 90 Nmm

MASS OF THE IMPACT BODY 20gTEST TIP

* Hardness 1600HV* Diameter 5mm* Material Tungsten Carbide

IMPACT DEVICEDiameter 30mmLength 254mmWeight 250g

MAX HARDNESS OF SAMPLE 650HBPREPARATION OF SURFACE

* Max. roughness depth Rt 30 µm* Average roughness Ra 6.3 µm

PREPARATION OF SURFACE* Of compact shape depth Rt 15kg

* On solid support 5kg* Coupled on plate 0.5kg

INDENTATION OF TEST TIPWITH 300 HV

* Diameter 1.03mm* Depth 53 µm

WITH 600 HV* Diameter 0. 90mm

* Depth 41 µm

Designed to test large castingand other rough & proous parts

5 Year

Warranty

D+15DC

D/DCGDL

Impact devices forall PHT Series portable hardness testers

“G” Impact DeviceThis device has an enlarged test tip, and anincreased impact energy range (approx. 9times the D, 72 ft-lb.). Can be used on lowerquality finishes for measuring hardness inthe Brinell range only (max. 650 HB).Designed to be used with heavy componentssuch as heavy castings and forgings.Weight: 250g.

“C” Impact DeviceA reduced energy impact device for measur-ing the hardness of Case Hardened Steelonly. Applies a small superficial indentation.Weight: 75g.

“D” Impact DeviceUniversal standard unit. Will handle themajority of hardness testing applications.Weight: 75g.

“DL” Impact DeviceThis model features a needle frontsection with a diameter of 4mm and a lengthof 50mm. It is suitable fortesting in extremely confined spaces, thebase of grooves and on specialcomponents such as as gear wheels.For use on steel and cast steel only!

“DC” Impact DeviceVery short impact device for those confined areas,i.e. inside bores for internal measurements.Conforms to the D measuring range. Weight: 50gFits PHT-2500 only.

“D+15” Impact DeviceVery narrow contact area with a set back measurementcoil. This device is used to measure hardness ingrooves and recessed surfaces. Weight: 80g.

12pc Universal Support Ring SetPHT1500-300This kit comes complete with 6-concave rings, 5 convex ringsand 1- small stand for difficult to test round or curved parts.

PHT1300-01 HLD Test Block(for use with all “D” type Impact Devices)

PHT1300-02 - MIDDLE RANGE

PHT1300-03 - LOW RANGE

PHT1100G-01 HLG Test Block(for use with “G” Impact Device)

Technical Data for Impact DevicesNote: Impact device D is standard device on all models. Specification is identical.

IMPACT DEVICES D/DC/DL D+15 C GIMPACT ENERGY 11Nmm 11Nmm 3Nmm 90NmmMASS OF THE IMPACT BODY 5. 5g 7. 8g 3. 0g 20g

DL: 7.3gTEST TIP* Hardness 1600HV 1600HV 1600HV 1600HV* Diameter 3mm 3mm 3mm 5mm* Material Tungsten Tungsten

carbide carbideIMPACT DEVICE* Diameter 20mm 20mm 20mm 30mm* Length 147/86mm 162mm 141mm 254mm* Weight 75/50g 80g 75g 250g

MAX. HARDNESS OF SAMPLE 940HV 940HV 1000HV 650HBPREPARATION OF SURFACE* Roughness class ISO N7 N7 N5 N9* Max. roughness depth Rt 10 m m 10 m m 2.5 m m 30 m m* Average roughness Ra 2 m m 2 m m 0. 4 m m 7 m m

MIN. WEIGHT OF SAMPLE* Of compact shape 5kg 5kg 1.5kg 15kg* On solid support 2kg 2kg 0.5kg 5kg* Coupled on plate 0. 1kg 0. 1kg 0. 02kg 0. 5kg

MIN. THICKNESS OF SAMPLE* Coupled 3mm 3mm 1mm 10mm* Min. thickness of layers 0. 8mm 0. 8mm 0. 2mm -

INDENTATION OF TEST TIPWith 300 HV* Diameter 0. 54mm 0. 54mm 0. 38mm 1.03mm* Depth 24 m m 24 m m 12 m m 53 m m

With 600 HV* Diameter 0. 45mm 0. 45mm 0. 32mm 0. 90mm* Depth 17 m m 17 m m 8 m m 41 m mC

With 800 HV* Diameter 0. 35mm 0. 35mm 0. 30mm -* Depth 10 m m 10 m m 7 m m -

For more details pleaserefer to page 28

900-331This hardness tester comprises the very best in “state of the art” designcoupled with dynamic precision only found at Phase II. The 900-331Rockwell scale hardness tester is easy to operate yet engineered to obtainhighly sensitive and accurate readings. A perfect, rugged performer suitedfor almost any environment including heat treat facilities, tool rooms, work-shops, laboratories and inspection labs. Lifetime technical support is includ-ed on all Phase II Hardness Testers. So test away with confidence and alevel of accuracy you will only find at Phase II.

Accessories:• C-scale Diamond Indentor• 1/16” Ball Indentor• 3- HRC Test Blocks• 1- HRB Test Block• 1-HRA Test Block• Test Table 5.87”(150mm)• Flat Anvil 2.5” (63mm)• Flat Anvil 5.87”• Std. Vee Anvil• H/D Accessory Case• Dust Cover

Options:•NIST/ASTM certified test

blocks, penetrators and kitsare available. Please referto pages 27 & 28.

• This model is availablewith ASTM E18-08B orcurrent certification.PLEASE CONTACT US

FOR DETAILS.

Minor Load 10KgfMajor Load 60Kgf, 100Kgf, 150KgfTest Force Application Dead WeightTest Force Control Hydraulic Dashpot SystemResults Display Analog Dial GageVertical Capacity 6.7 in.Throat Depth 6.6 in.Height 30.0 in.Width 8.50 in.Depth 20.0 in.Shipping Weight 242 lbs.

5 Year

Warranty

900-332The 900-332 Rockwell hardness tester is perfectly designed for that large part application. It is easy tooperate and engineered to take highly sensitive and accurate readings. Perfect for the shop floor, labs,heat treat facilities and tool rooms.

Minor Load 10KgfMajor Load 60Kgf, 100Kgf, 150KgfTest Force Application Dead WeightTest Force Control Hydraulic Dashpot SystemResults Display Analog Dial GageVertical Capacity 15-3/4” in.Throat Depth 5.5 in.Height 33.0 in.Width 18.0 in.Depth 70.0 in.Shipping Weight 200 lbs.

Accessories:• C-scale Diamond Indentor• 1/16” Carbide Ball Indentor• 3- HRC Test Blocks• 1- HRB Test Block• 1-HRA Test Block• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Std. “V” Anvil• Accessory Case

Features:•153⁄4” Test height for extremely large parts•Direct analog dial reading•Advanced design, easy to operate•Engineered to obtain highly sensitive and accurate readings

5 Year

Warranty




FOR DETAILS.

Accessories:• N-scale Diamond Indentor• 1/16” Steel Ball Indentor• 2- HRN Test Blocks• 3-HRT Test Blocks• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Spot Anvil .38” (10mm)• Std. Vee Anvil• Accessory Case• Dust Cover

Test Force Control Hydraulic Dash PotResults Display Analog DialVertical Capacity 6.7 in.Throat Depth 6.6 in.Height 28 in.Width 8.9 in.Depth 19.6 in.Shipping Weight 190 lbs

5 Year

Warranty

Specifications:Minor Load 3 KgfMajor Load 15 Kgf, 30 Kgf, 45 KgfTest Force Applicaiton Dead Weight

900-345Just like our Phase II analog rockwell hardness tester, the 900-345 superficial rockwell hard-ness tester comprises the very best in "state of the art" design, coupled with dynamic preci-sion only found at Phase II. Used for testing thin and soft metals in the superficial rockwellhardness scales, the 900-345 is easy to operate yet engineered to obtain highly sensitive andaccurate readings. The 900-345 will offer unmatched repeatability in all superficial rockwellscales. A perfect, rugged performer suited for almost any environment including heat treatfacilities, tool rooms, workshops, laboratories and inspection labs. So test away with confi-dence and a level of accuracy you will only find at Phase II.




FOR DETAILS.

900-375Our latest Phase II analog Rockwell Hardness Tester, the 900-375, tests both Rockwell hardness and Superficial Rockwell hardness in one unit, with state of theart design and dynamic precision only found at Phase II. The Phase II Twin Rockwell/Superficial Rockwell hardness tester is ruggedly engineered to obtain highlysensitive and accurate readings. Conforming to ASTM E-18 Rockwell hardness standards, this hardness tester will offer unmatched repeatability in all Rockwellhardness scales. A perfect performer suited for any environment including heat treatment facilities, tool rooms, workshops, laboratories and inspection labs.Lifetime technical support is included with all Phase II Hardness Testers. So test away with confidence and a level of accuracy you will only find at Phase II.

Test Rockwell and Superficial Rockwell Hardness in 1 Unit!

Accessories:• Diamond Conical Indentor• 1/16” Ball Indentor• 2- HRC Test Blocks• 1- HRB Test Block• 1- HR15N Test Block• 1- HR30N Test Block• 1- HR45T Test Block• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Std. Vee Anvil• Accessory Case• Dust Cover

Minor Load 3Kgf 10Kgf

Major Load15Kgf 60 Kgf30 Kgf 100 Kgf45 Kgf 150 Kgf

Test Force Application Dead Weight

Test Force Control Manual

Results Display Dual Scale Dial

Vertical Capacity 6.0 in.

Throat Depth 5.5 in.

Height 26 in.

Width 18.2 in.

Depth 9.4 in.

Depth 165 lbs.

Features:• Direct analog dial reading• Advanced design, easy to operate• Engineered to obtain highly sensitive and accurate readings• Conforms to ASTM E-18 – Perfect for laboratories, workshops,

tool rooms, inspection labs, etc.

5 Year

Warranty




FOR DETAILS.

Accessories:• N-scale Diamond Indentor• 1/16” Steel Ball Indentor• 2- HRN Test Blocks• 3-HRT Test Blocks• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Std. Vee Anvil• Accessory Case• Dust Cover

Minor Load 3Kgf

Major Load15Kgf30 Kgf45 Kgf


Test Force Control Motorized

Results Display Hi Def LCD Digital

Vertical Capacity 7.87”

Throat Depth 6.50”

Height 28.34”

Width 7.87”

Depth 21.60”

Depth 220 lbs

Features:• Fully automated load/unload procedures affords highly sensitive and accurate readings• Micro computer controlled with USB output to built-in mini printer or PC.• Offers programmable scale conversions, dwell times, statistical capabilities and test counter• Capable of testing in all of the Superficial Rockwell® scales• Automatic conversions to HRC, HRB, HB, HV, HLD and Ob• Easily obtain Average, Min/Max, S, R• Menu selectable system• Upper/Lower Limit Settings• Memory of 500 test results• Curved Surface Auto correction

900-348"Fully automated load/unload procedures affords highly sensitive and accurate readings.Micro computer controlled with USB outputto built-in mini printer or PC. Offers programmable scale conversions , dwell times, statistical capabilities and test counter.

5 Year

Warranty




FOR DETAILS.

Features:• Easily obtain Average,

Min/Max, S, R• Menu selectable system• Upper/Lower Limit Settings• Memory of 500 test results• Curved Surface Auto Correction

Minor Load 10 Kgf

Major Load 60 kgf, 100 kgf, 150 kgf



Results Display Hi Def LCD Digital Readout

Resolution 0.1HR

Memory/Output 500 Tests/USB

Vertical Capacity 7.87”

Throat Depth 6.50”

Height 28.34”

Width 7.87”

Depth 21.60”

Weight 220 lbs

Accessories:• C-scale Diamond Indenter• 1/16” Ball Indenter• 2- HRC test Blocks• 1- HRB Test Block• Built-in Mini Printer• Test Table 5.87”

(150mm)• Flat Anvil 2.5” (63mm)• Std. Vee Anvil• Accessory Case• Dust Cover

900-365Fully automated load/unload procedures affords highly sensitive and accurate readings.Micro computer controlled with USB output to built-in mini printer or PC. Offersprogrammable scale conversions, dwell times, statistical capabilities and test counter.Capable of testing in all of the regular Rockwell® scales. Automatic conversions to HB, HV,HLD, HRN, HRT, and σb

Comes Complete with everything needed to test in the following Rockwell Scales; A, B, C, D, F, G.Rockwell Scales E, H, K, L, M, P, R, S, V can be achieved with optional indentors!

5 Year

Warranty




FOR DETAILS.

900-385The Phase II state of the art multi-functional 900-385 twin hardness tester can be used directly to measure Rockwell and superficial Rockwell hardness and changethose values of Rockwell hardness into HB, HV, HLD, HK and _b values.

Loaded with features such as ultra precise measurements, wide measuring range, automatic main test force loading/unloading, digitally displayed results,automatic printing, RS232&USB output, etc. the 900-385 is suitable for hardness testing on carbon steel, alloy steel, cast iron, non ferrous metal and engineeringplastics. A perfect performer suited for any environment including heat treat facilities, tool rooms, workshops, laboratories and inspection labs.

Accessories:• Diamond Conical Indentor• 1/16” Carbide Ball Indentor• 1- HRC Test Blocks• 1- HRB Test Block• 1- HRA Test Block• 1- HR30N Test Block• 1- HR30T Test Block• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Std. V- Anvil

Minor Load 3Kgf 10Kgf

Major Load15Kgf 60 Kgf30 Kgf 100 Kgf45 Kgf 150 Kgf



Results Display Hi-Def. Digital Readout

Display Resolution 0.1HR

Vertical Capacity 10.2 in.

Throat Depth 5.9 in.Power Supply single phase 110/220. 50-60hz.

Note: needs manual plug adjustmentfor 220v.

Weight 265lbs Net (Shipping weigh = 300 lbs)

Dimensions 720mm x 240mm x 825mm

5 Year

Warranty




FOR DETAILS.

900-355Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DCmotor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common loadovershoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates frictionproblems but also makes the equipment less sensitive to misalignments caused by vibrations.

Features:• Load Cell driven system provides

precise control of test forceapplication

• Direct reading• Engineered to obtain highly sensitive

and accurate readings• Perfect for laboratories, workshops,

tool rooms, inspection labs, etc.• Measuring Range: 8-650HBW

Specifications:Loads: F3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N),

250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)Load dwell duration: 2s_99s, can be set and storedTungsten Carbide Ball indenter: 10mm, 5mm, 2.5mmMeasuring range: 3.18HBW~

58HBWMagnification of the microscope: 20XResolution capability of the microscope: 0.005mmMax measurable height: 230 mmMax measurable depth: 140 mmDimensions: 530mm_260mm_750mmPower supply: 220/110 V, 50/60 Hz, 4AWeight: 110kg

Hardness Range(HBW) Error (%) Repeatability(%)

≤ 125 ± 3.0 ≤ 3.0

125 < HBW ≤ 225 ± 2.5 ≤ 2.5

> 225 ± 2.0≤ 20

5 Year

Warranty

900-390Our advanced line of Micro Vickers hardness testersare precise testing systems suitable for hardnessanalysis of metallic specimens in metallographylaboratories or production environments.

Main Features:• 10x objective and a 40x objective and a 10x microscope

for measurement.

• Displays measuring method, testing force value, indentation length,hardness value, dwell timeof the testing force, as well as the number of measurement on theLCD screen.

• Automatic calculations after value entered on keypad shown onthe display.

• Threaded interface that can be linked to the digital camera and CCDpickup camera.

• Adopted cold light source with life of approx. 100000 hours. Theuser also can select halogen lamp as lightsource according to their requirement.

• The CCD Automatic Image Measuring Device can be equipped onpresent tester according to user’s requirement.

• The LCD Video Measuring Device can be equipped on the presenttester according to user’s requirement.

• Knoop hardness values can be obtained by installing a Knoop indenter.

Technical Features:Testing Range: 1HV - 2967HV

Test Force: 0.098N(10g), 0.246N(25g), 0.49N(50g), 0.98N(100g)

1.96N(200g), 4.90N(500g), 9.80N(1000g/1kg)

Max Height of the Specimen: 70mm

Max Distance from the Indenter Centerto the Instrument Panel: 95mm

Lens/indenters with: With Hand Turret

Carriage Control: Automatic(Load/Dwell/Unload)

Amplification of the microscope: 100x/400x

Dwell Time of the Test Force: (5-60)S

Min.Graduation Value of the Testing Drum Wheel: 0.25um

Dimension of the XY Table: 100x100mm

Movement Field of the XY Table: 25x25mm

Light source/Power Supply: 110/220

Weight/Gross Weight: 41.5kg Net Weight: 35kg

Package Dimensions: 425x245x490mm

5 Year

Warranty

Features:• Phase II offers a vast array of different hardness test blocks for Rockwell, Brinell and Vickers scales, as well as Portable hardness testers

•Phase II hardness test blocks are made of high grade materials to assure unmatched accuracy and repeatability throughout the entire block.

•Phase II Hardness test block surfaces are precision ground and lapped to an average finish of less than 2uin.

•Hardness Test blocks always engineered to obtain highly sensitive and accurate readings.

•All Made in the USA hardness test blocks conform to current ASTM specifications

•Traceability to NIST is offered on HRC steel blocks only.

•Prestigious Accredited laboratory A2LA and NVLAP in the USA used.

Part No. Description Shape Range Comments900330-9413 Rockwell A Round 80-88 Phase II std.

900330-9414H Rockwell B Square 85-100 Made in USA

900330-9414L Rockwell B Square 60-80 Made in USA

900330-9414C Rockwell B Round 85-100 Phase II std.

900330-9414D Rockwell B Round 60-80 Phase II std.

900330-9415C Rockwell C Round 20-30’s Phase II std.

900330-9415D Rockwell C Round 20-30’s Phase II NIST certified

900330-9415E Rockwell C Square 20-30’s Made in USA/NIST cert.

900330-9416C Rockwell C Round 40’s-50’s Phase II std.

900330-9416D Rockwell C Round 40’s-50’s Phase II NIST certified

900330-9416E Rockwell C Square 40’s-50’s Made in USA/NIST cert.

900330-9417C Rockwell C Round 60-70 Phase II std.

900330-9417D Rockwell C Round 60-70 Phase II NIST certified

900330-9417E Rockwell C Square 60-70 Made in USA/NIST cert.

900340-9001 Superficial HR15N Round 70-91 Phase II std.



900340-9004 Superficial HR45T Round 55-72 Phase II std.



900345-1015N-L Superficial HR15N Square Low range Made in USA

900345-1015N-M Superficial HR15N Square Mid range Made in USA

900345-1015N-H Superficial HR15N Square High range Made in USA

900345-1015T-L Superficial HR15T Square Low range Made in USA

900345-1015T-M Superficial HR15T Square Mid range Made in USA

900345-1015T-H Superficial HR15T Square High range Made in USA













STEEL

3pc NIST certified test block kitPart No. 900330-94103pc set includes HRC blocks w/NIST certification foreach block in custom carry case

NISTMaster CalibrationKit-C scalePart No. 900330-9410MKit includes same HRC test blocks as above as well asa certified diamond indentor in custom carry case

NISTMasterCalibrationKit-C/NscalePartNo. 900330-9410ZKit includes same test blocks as above as well as a cer-tified Combo C&N scale diamond indentor in customcarry case

Part No. Description Shape Range Comments900355-3000/150 3000kg Steel Round 150-250 Phase II std.

900355-3000/250 3000kg Steel Round 250-500 Phase II std.

900355-3030 3000kg Steel Rectangle 100-200 Made in USA

900355-3040 3000kg Steel Rectangle 250-350 Made in USA

900355-3050 3000kg/steel Rectangle 350-500 Made in USA

900355-3060 3000kg/steel Rectangle 500-600 Made in USA

900355-3010 3000kg Rectangle Low Aluminum (USA)

900355-3020 3000kg Rectangle High Aluminum (USA)

BRINELL

ALUMINUMPart No. Description Shape Range Comments

900330-9414AH Rockwell B Square 80’s Made in USA

900330-9414AL Rockwell B Square 50’s Made in USA

900330-9418H Rockwell E Square 90’s Made in USA

900330-9418L Rockwell E Square 60’s Made in USA

VICKERS HARDNESS TEST BLOCKSPart No. Description Range Comments

900390-V010 Vickers (1 gram to 1,000 gram) All Made in USA

900390-V020 Heavy Load Vickers (1 Kg to 50 Kg) All Made in USA

900390-K010 Knoop (1 gram to 1,000 gram) All Made in USA

BRASSPart No. Description Shape Range Comments

900330-9414BH Rockwell B Square 80’s Made in USA

900330-9414BL Rockwell B Square 50’s Made in USA

All of our Made in USA Brinell Test Blocks comecertified to applicable standards. We adhere toa strict procedure for the calibration of theseblocks, and the accuracy of the tester ismaintained using a proving ring and load cellboth traceable to N.I.S.T. The readingsthemselves are done using a stage micrometeralso calibrated and traceable to N.I.S.T.

Part No. Description Shape Range CommentsPHT1300-01 Leeb “D” Test Block Round 750-800 Phase II std.

PHT1300-02 Leeb “D” Test Block Round 590-670 Phase II std.

PHT1300-03 Leeb “D” Test Block Round 490-570 Phase II std.

PHT1300-01cert Leeb “D” Test Block Round 750-800 NIST Certified

PHT1100G-01 Leeb “G” Test Block Round 590-670 For use with “G” impact devices

LEEB TEST BLOCKS

Part No. Description900331-9405 2” Dia. Anvil (flat)

900331-9411 Large Dia. Anvil (Flat)

900331-9407 V-Anvil

900331-9406 1/2” Dia. Spot Anvil

ANVILS: 19MM SHANK

PENETRATORS: DIAMONDPart No. Description Comments

900330-9440 Rockwell C scale Phase II std.

900330-9440A Rockwell C scale Grade A (USA)

900330-9440B Rockwell C scale Grade B (USA)

900330-9440C Combination C&N scale Made in USA

Part No. Description Comments900330‐9441 1/16” Carbide Ball Phase II std.

900330‐9441C 1/16” Carbide Ball Certified (USA)

900330‐18 1/8” Carbide Ball Phase II std.






900355‐010 Brinell 10mm Carbide Ball Phase II std.

900355‐010C Brinell 10mm Carbide Ball Certified (USA)

900355‐050 Brinell 5mm Carbide Ball Phase II std.

900355‐050C Brinell 5mm Carbide Ball Certified (USA)

900355‐025 Brinell 2.5mm Carbide Ball Phase II std.

900355‐025C Brinell 2.5mm Carbide Ball Certified (USA)

PENETRATORS:W/CARBIDE BALL

ANVILS: 20MM SHANKPart No. Description

900330‐9405 2” Dia. Anvil (flat)

900330‐9411 Large Dia. Anvil (Flat)

900330‐9412 V‐Anvil

900365-625 Spot V & Spot Anvil

900365-630 Diamond Spot Anvil

900365-700 Gosse Neck for Inner Surface Testing

Fits Models 900-330, 900-348, 900-365 and 900-385

Vickers and Knoop Diamonds Available on Request

Fits Models 900-331, 900-332, 900-345 & 900-375

These testers are crafted and engineered toperform at the highest level of accuracy.An ergonomic and attractive design combinedwith lightweight assists in taking precisehardness measurements.

Test Blocks Not Included. See selection below:

PHT-950 Digital Shore A DurometerPHT-975 Digital Shore D DurometerPHT950-25 Shore A Master Test Block Kit (7pc set)PHT-975-25 Shore D Master Set(3pcs in case)

PHT-950 Shore “A” PHT-975 Shore “D”

Measurement Range 0-100HSA 0-100 HSD

Resolution 0.1H 0.1H

Digital Readout Yes Yes

StatisticsYesMean, Min, Max, No. ofMeasurements and Deviation

YesMean, Min, Max, No. ofMeasurements and Deviation

Power Supply 4 x AAA 4 x AAA

Low Battery Indicator Yes Yes

5 Year

Warranty

Model No. PHT-960 Shore A ScaleModel No. PHT-980 Shore D ScaleDesigned to test the hardness of Rubbers and Plastics

These sleek hand held hardness testers are crafted and engineered to perform at the highest level of accuracy. An ergonomic,lightweight design assists in taking precise and consistent hardness measurements.

Specifications:• Measuring range: 0-100HSA (0-100 HSD)• Resolution: 0 .5H• Digital read out• Auto Hold feature• Uses 1-SR44 Button Cell Battery• Custom rugged carry case

5 Year

Warranty

Shore A scale is for testing the following materials:Rubber: Soft vulcanized (ie tire), natural nitrile.Elastic materials (rubber & rubber like): GR-S, GR-1, neoprene,thiokol.Other: Wax, felt, leather etc. (materials that normally yield underfingernail pressure, such as the heel on your shoe).

Shore D scale is for testing the following materials:Rubber: HardPlastics: Harder grades such as rigid thermoplastics, plexiglass,thermoploystyrene, vinyl sheet, cellulode acetate, thermosettingLaminates (ie formica)Other: Paper filled calendar rolls, calendar bowls, etc. (materials thatwould not normally indent under fingernail pressure, such as a pocketcomb or bowling ball).

PHT-995The Phase II Coating Hardness Tester is engineered to determine the resistance of coatings to scratch effects on the surface. Utilizing the Wolff/Wilborn principle,this coating hardness tester conforms to ASTM D 3363-05.

Pencils of various known hardness are dragged over the coating surface at a fixed angle and fixed pressure. Beginning with the hardest lead, graduating softer,movements of .250” (6.5mm) will determine where the surface area is/is not being gouged or scratched.

Pencils can be changed easily via a knurled thumb screw on the side of the instrument.

A set of 14 calibrated wood drawing pencils is included from 6B to 6H.

SRG-4500

Features:• 15 Different roughness parameters• Inside/Outside Diameters• Stylus position indicator• USB output to PC• Extended memory functions

Optional Accessories:• Precision Support Stand• 90º Stylus Adapter• Deep Groove Stylus• Small Hole Stylus• Curved Surface Stylus• Stylus Extension

Technical Specifications:• Measures flat, Inside, Outside Diameters and sloping surfaces• Measures grooves and recessions: wider than 0.16in (4mm)• Roughness parameters: Ra, Rz, Ry, Rq, Rt, Rp, Rs, Rv, Rms(Rq), Rmax, Rm, R3z, Rsk, Rpc, Rmr.• Roughness standards: ISO/DIN/JIS/ANSI• Display resolutions: 0.01µm/+/-20 µm

0.02µm/+/-40 µm0.04µm/+/-80 µm

• Measuring accuracy: ≤±10%• Repeatability: Less than or equal to 6%• Measuring range: Ra, Rq: 0.01-40µm

Rz,Ry,Rp,Rt,R3z, Rm: 0.02-160µmSm, S: 2-4000µmRsk: 0-100%

• Maximum drive range: 0.7in(17.5mm)• Cut-off length: 0.009/0.03/0.09inch (0.25/0.8/2.5mm)• Tracing speeds:

speed 1mm/s (sampling length 2.5mm)speed 0.5mm/s (sampling length 0.8mm)speed 0.135mm/s (sampling length 0.25mm)

• Sensor: Inductance type• Sensor-stylus: Diamond, radius 5µm• Pick up Force: <4mN• Filter: RC, PC-RC,GAUSSIAN,D-P• Data output: USB• Operating temperature: 41ºF-104ºF (5º-40ºC)• Weight: 0.97lb(440g)• Dimensions: (119 x 47 x 65mm)• Power: Li-Ion rechargeable battery• Auto shut-off

5 Year

Warranty

New!

SRG-4000SRG4000-050Optional Precision Test Stand

Optional Accessories:SRG4000-050 Precision Support StandSRG4000-110 Stylus ExtensionSRG4000-130 2µm Diamond StylusSRG4000-140 Stylus for GroovesSRG4000-150 Stylus for Curved Surfaces

Features:• 4 Different roughness parameters• Inside/Outside Diameters• Stylus Level Indicator

5 Year

Warranty

Roughness parameter Ra, Rz, Rq(RMS), RtAssessed Profiles Primary profile(p),

Roughness profile(R) tp curve (Mr)

Conformance Standards ISO/DIN/JIS/ANSI

Measuring System Metric µm, Imperial µinch

Display Resolution +/-20 µm = 0.001 µm+/-40 µm = 0.002 µm+/-80 µm = 0.004 µm

Display Range Ra, Rq: 0.005 µm up to 16 µmRz, Rt: 0.02 µm up to 160 µm

Pick Up Measuring Range +/- 80 µm

Sensor Specifications 5 µm Diamond Tip Stylus

Sensor Angle 90°

Contact Force 4mN (0.4gf)

Display features SStylus position sensorBattery level indicatorDirect display of parametersDirect printingAuto-off with auto store

Cut-off lengths 0.25mm/0.8mm/2.5mm

Tracing length Lt 1.3mm – 17.5mm

Digital Filter RC, PC-RC, GUASSIAN, D-P

Traverse Length Selectable 1,3 or 5

Power Li-Ion battery

Working temperature 5-40 degrees C.

Dimensions 139mm x 56mm x 48mm

Weight 450g

SRG-2000The PHASE II SRG-2000 surface roughness tester is a pocket-sized economically priced instrument for measuring surface roughness texture conforming to traceable standards.It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.

The large LCD display shows either surface roughness parameter Ra, Rz, Rms(Rq) and Rt at the touch of a button, combined with the selected cutoff length. External calibrationof the surface roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user abouteach individual measurement status when ready.

The easy to use SRG-2000 surface roughness tester operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80x30mm. The areas of application are wide spread. It is suitable for inspection departments, quality control, on the shop floor during machining, during assembly in the field.

The SRG-2000 determines surface roughnessparameters Ra,Rz, Rms(Rq) and Rt within a widemeasuring range. The piezo-electric pick-up stylus with diamond tip assures a veryreliable measurement within tolerances thatconform to ASME B46.1. Surface Roughnessparameter Ra is computed to conform to ISO andRz is computed to conform to DIN.

Surface Roughness parameter Ra (ISO), Rz (DIN), Rms(Rq), Rt

Measuring rangeRa: 0.05-10.0µm / Rz: 0.1-50mmRq: 0.05 ~ 10.0µm / Rt: 0.1 ~ 50µm

Resolution 0.01µm (1.6minch)

Cut-off lengths 0.0009in., 0.03in., 0.09in

Filter RC analogue

Tracing length 0.23in (6mm)

Tracing speed 0.04in/second (1.0mm/second)

Accuracy +/- 12% of actual Value

Pick-up stylus Piezo-electric

Tracer tip Diamond, radius 5µm

Operating temperature 32-104 degrees F (0-40 degrees C)

Power 3.6v / 2xNiMh batteries

Charger 9V DC

Contact force on probe <1.8ozf (<50gf)

Static measuring forceof sensor stylus <0.06ozf (<1.6gf)

Dimensions 4.9 x 2.8 x 1.0in (125 x 73 x 26mm)

Weight 0.4lbs (200g)

The PHASE II SRG-2000 surface roughnesstester comes complete with a compact durablecarrying case, roughness standard, chargerand instruction manual.

5 Year

Warranty

Display 4-digit LCDMeasuring Range 0-800µm (0-30mils)Accuracy +/-5% or 5 µm (Whichever is greater)Resolution 1 µm (0.1mils)Readout Inch or MetricMeasurement Speed >30 readings/minuteOperating Temp 0-50ºC <80%RHDimensions 162 x 65 x 28mmWeight 280gPower supply 4-AAA Batteries

SPG-1000The SPG-1000 digital surface profile gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured .

The gauge is initially set to zero with the glass zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and thesharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height. A number of measurements can be made and theaverage taken

Supplied in Carrying Case with Glass Zero Plate, Operation Manual, Calibration certificate and Batteries

5 Year

Warranty

Display type 4-digit LCD w/Back LightMinimum display unit 0.001”/0.01mm (selectable)Measuring Range 0.02-12.0” in steel w/standard probeAccuracy +/- (0.5% thickness + .001”)Sound velocity range 3280-32805 ft/s (1000-9999m/s)Upper/Lower Limit Preset Alarm YesOperating temperature 32-122 degrees FFrequency 5MHzUpdate range 4HzMemory 20 Groups (100 files/group)Output USBMini-Printer OptionalPower supply 3v AA alkaline batteries (2pc)Battery life Approx. 100 hours (w/backlight off)Power consumption Working current is less than 3VDimensions 5.90” x 2.91” x 1.30” (150 x 74 x 33mm)Weight 8.6oz (245g)

UTG-2800State of the art, digital tester is packed with features typically found on high end models only. This multi-functional unit offers everything frombasic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities. This dynamic sonic gauge isdesigned to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other goodultrasonic wave conductor as long as it has parallel top and bottom surfaces.

The UTG-2800 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

5 Year

Warranty

Features:• A-Scan Color Waveform• Adjustable Sound Velocity• Adjustable Gain• Adjustable Gate• Automatic V-Path Correction• Min/Max Settings w/Alarm• Blanking• Differential Mode

And so much more!

5 Year

Warranty

New!

UTG-3000Utilizing color waveform A-scan for absolute correctness, this new state of the art thickness gauge is packed with useful features allowing users to beconfident of the displayed values on the most critical of applications. This multi-functional unit offers everything from basic measurement, Scan withMin/Max viewing, GO/NO GO display, Adjustable Gain and Adjustable Sound Velocity. This dynamic sonic gauge is designed to measure the thickness ofmetallic and non-metallic materials in critical situations that ordinary thickness gauges couldn’t do.

The UTG-3000 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

Operating Principle Ultrasonic pulse/echo method with dual element probeDisplay type 2.4” Color ScreenResolution 0.001”, .01” /0.01mm (selectable)Measuring Range 0.02-20.0” (10mm-145mm) Dependant upon probe & materialGain-Adjustable 8 – 55dB (higher the gain, the higher the sensitivity is)Repeatability +/-.001” (+/-0.05mm)Sound velocity range 0.0197-0.3937in/us (500-9999m/s)

Measuring Error0.001”(up to 0.984”)0.007”(up to 3.03”0.019”( 4” and above)

Display Modes

Digital Thickness ReadoutA-scan or WaveformMin/Max CaptureD-Value / Reduction

V-Path Correction AutomaticGate-Adjustable Gate ranges from 1-50mm (for A-scan only)Refresh rate 4/secondOperating temperature 14-122ºF (-10ºC - +50ºC)Auto Shut-Off After 5 minutesPower supply 3v AA alkaline batteries (2pc)Operating Time Approx. 36 hoursDimensions 6.02” x 2.99” x 1.45” (153 x 76 x 37mm)Weight 9.9oz (280g)

Probe Type PT-08 PT-06 PT-04 ZT-12 GT-12

Probe Style Standard Small Tube Extreme small tube Rough surface/Porous metal Hi-Temp

Frequency 5MHz 7.5 MHz 10 MHz 2 MHz 5 MHz

Contact Dia. 8mm 6mm 4mm 17mm 15mm

Measure range .031-3.93” .031-1.18” .019-.787” .157-20” .157-3.14”

Temperature 14-158ºF 14-158ºF 14-158ºF 14-158ºF 0-572ºF

Image

UTG-3000 comes complete with 5MHz Probe, Couplant Gel,Certificate of Calibration, Operation Manual and Custom Carry Case.

UTG-2600 comes complete with Certificate of Calibration,Operation Manual and Custom Carry Case.

UTG-2600State of the art, digital tester is capable of readingwall thickness thru coatings and paint without affectingthe measurement and is packed with the most popularfeatures including basic measurement, ScanningCapabilities, Adjustable Sound Velocity, and extendedmemory. This dynamic sonic gauge is designed tomeasure the thickness of metallic and non-metallicmaterials such as steel, aluminum, titanium, plastics,ceramics, glass and any other good ultrasonic waveconductor as long as it has parallel top and bottomsurfaces. The UTG-2600 will accurately display read-ings in either inch or millimeter after a simple calibra-tion to a known thickness or sound velocity.

Display type 4-digit LCD w/Back Light

Minimum display unit0.003 (if>3.93”0.0003” (if<3.93”)

Measuring RangeStandard Mode: 0.03-8.0” in steelThru Coating Mode: 0.118” - .905” 3.0 -23mm)w/standard probe

Accuracy +/- 1%xH + 0.0007” (H=displayed value)Sound velocity range 3280-32805 ft/s (1000-9999m/s)Upper/Lower Limit Preset Alarm YesOperating temperature 32-122 degrees FFrequency 4MHzUpdate range 4HzMemory 500 Test ValuesPower supply 3v AA alkaline batteries (2pc)Battery life Approx. 100 hours (w/backlight off)Power consumption Working current is less than 3VDimensions 5.86” x 2.87” x 1.25” (149 x 73 x 32mm)Weight 5.6oz (160g)

5 Year

Warranty

UTG-2650State of the art ultrasonic technology allows you to obtain ultra precise thickness measurements and store them to memory. Thisdigital tester is capable of reading wall thickness down to 0.010” with a super high adjustable resolution of up to0.0001”. This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such assteel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel topand bottom surfaces. The UTG-2650 will accurately display readings in either inch or millimeter after a simple calibration to aknown thickness or sound velocity.

UTG-2650 comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

Display type 4-digit LCD w/ Backlight

Display Resolution Inch: 0.01”, 0.001” or 0.0001” (selectable)Metric: 0.1mm, 0.01mm or 0.001mm(selectable)

Measuring Range Standard Mode: 0.010” – 0.787” (steel)

Accuracy +/-0.0002” (0.005mm) if thickness < 3mm+/-0.002” (0.05mm) if thickness < 20mm

Sound velocity range 3280-32805 ft/s (1000-9999m/s) AdjustableUpper/Lower Limit Preset Alarm YesOperating temperature 32-122 degrees FRefresh Frequency 4MHz up to 25MHzMemory 500 Test ValuesOutput N/APower supply AA alkaline batteries (2pc)Battery Life Approx. 200 hours (w/backlight off)Power consumption Working current is less than 3VDimensions 5.86” x 2.87” x 1.25” (149 x 73 x 32mm)Weight 5.6oz (160g)

5 Year

Warranty

UTG-1500This handheld unit has precise touch and read capabilities yetis economically priced. The UTG-1500 is designed to measurethe thickness of metallic and non-metallic materials such asaluminum, titanium, plastics, ceramics, glass and any othergood ultrasonic wave conductor as long as it has parallel topand bottom surfaces. The UTG-1500 will accurately displayreadings in either inch or millimeter after a simplecalibration to a known thickness or sound velocity.

Display type 3-digit LCDResolution 0.001”/0.01mmMeasuring Range 0.04” to 8.0”Sound velocity range 3280-32805 ft/s (1000-9999m/s)Operating temperature 32-122 degrees FFrequency 5MHzUpdate range 4HzMemory N/AOutput N/APrinting N/APower supply AA alkaline batteries (4pc supplied)Battery life Approx. 250 hours/setPower consumption Working current is less than 3VDimensions 4.9” x 2.6” x 0.9” (161 x 69 x 32mm)Weight 0.7lbs (300g)

Comes complete with Certificate of Calibration, Couplant Gel,AA Batteries, Operation Manual and Custom Carry Case.

5 Year

Warranty

UTG-2000 Ultrasonic Thickness Gauge- Basic Touch/ReadState of the art, digital testers are menu driven, multi-functional units offering everything from the basic measurement to extended memory and RS 232output capabilities. This dynamic series of gages are designed to measure the thickness of metallic and non-metallic materials such as aluminum, titanium,plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2000 series gages willaccurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

Display type 4-digit LCDMinimum display unit 0.001”/0.01mmMeasuring Range 0.04-8.0” in steel w/standard probeDisplay accuracy 0.001” / 0.01mmSound velocity range 3280-32805 ft/s (1000-9999m/s)Operating temperature 32-122 degrees FFrequency 5MHzUpdate range 4HzMemory N/AOutput N/APrinting N/APower supply 1.5v AAA alkaline batteries (2pc)Battery life Approx. 250 hours/setPower consumption Working current is less than 3VDimensions 4-1/4 x 2-3/8 x 1”Weight 4.7oz

Both versions come complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

5 Year

Warranty

New!

Model No. DescriptionRangeUTG-0500 5-Step BlockUTG-0100 NIST Traceable Certificate

Model No. DescriptionUTG1000-800 4oz. Bottle of Couplant GelUTG1000-850 Gallon-Couplant Gel

Stock No. Description Compatibility Comments

UTG2000-020 2” Inside Diameter Probe5Mhz - 12mm dia. 90º angle

UTG1000/2000/2020/2800For testing inside cylinders

w/2” diameterUTG2000-030 3” Inside Diameter Probe

5Mhz - 12mm dia. 90º angleUTG1000/2000/2020/2800

For testing inside cylindersw/3” diameter

UTG2000-400 12mmø – 90º angle – 10Mhz UTG1000/2000/2020/2600/2800 General Purpose

UTG2000-410 6mmø – 90 º angle – 5Mhz UTG1000/2000/2020/2600/2800 For testing small areas

UTG2000-440 14mm ø – 90 º angle – 2.0MhzUTG1000/2000/2020

For testing Rough Surfaces(min thickness of .07”)

UTG2000-450 12mm ø – Straight – 5MhzUTG1000/2000/2020/2800

For testing Hi Temperature(up to 930 º)

UTG2000-475 6mmø – 90 º angle – 7.5MhzRigid extended probe

UTG1000/2000/2020/2800For testing in deep inside bores

UTG2600-400 4mmø – 0 º angle – 10Mhz UTG-2000/2020/2600/2800 For testing extremely small areas

UTG2600-410 8mm ø – 90 º angle – 5Mhz UTG-2600 only General Purpose

UTG2600-420 12mm ø – 90 º angle – 2.25Mhz UTG-2600 only For testing porous materials/rough surface

UTG2800-400* 10mm ø – Straight – 5Mhz UTG-2800 only General Purpose

UTG2800-420 14mm ø – 90 º angle – 2.50MhzUTG-2800 only

For testing porous materials/rough surface

Joann

Sticky Note

why are you showing the 4 oz and the 8 oz bottle? We are out of 4 oz and we are not restocking it.

PTG-3700/3750The PHASE II PTG-3700 series of gages can perform two different methods of calculating thickness measurement by utilizing the characteristics of botheddy current and magnetic induction.

Testing performance is both non-destructive and extremely accurate.

With these state of the art thickness gages, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulatingcoating on a non-magnetic conductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with an external probe.

The PHASE II PTG-3700/3750 can be used in many areas of industry including automotive paint measurement, manufacturing, general engineering,commercial inspection, etc.

The PTG-3700 utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substratesamples(steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.

The PTG-3750 utilizes a probe attached via cable that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substratesamples(steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.

Technical Data:Measuring range: 0-1250 µ m max. or 0-50 milsResolution: 0.1m m / 0.01mils(0-99µm) or 1µ m (over 100µm)Guaranteed tolerance:

After one-point calibration: +/- 1-3%n or 2.5µ m(whichever is greater)

Display: 4 digits LCDMin. measuring area: 0.2” x 0.2” (5mm x 5mm)Min. radius of curvature: Convex: 0.12” (3mm)

Concave: 1.2” (30mm)

Min. substrate thickness: Ferrous: 20 mils (0.5mm)Non-ferrous: 2 mils (50 m m)

Calibration: Zero CalibrationFoil calibration

Max. Surface temperature of test object: 302 degrees F(contact time max is 2 seconds)Power source: 4 AA batteriesDimensions: 161 x 69 x 32mmWeight: 9oz. (260g)

5 Year

Warranty

Main Technical Data:• Measuring range: 0-1000µm or 0-40mils• Resolution: 0.1µm/0.01mils(0-99µm)

or 1m m (over 100µm)• Guaranteed tolerance: After one-point

calibration: =/- 1-3%n or 2 µm(whichever is greater)

• Display: 4 digits(digit height = 10mm/0.4”)

• Min. measuring area: 0.2” x 0.2”(5mm x 5mm)

• Min. radius of curvature: Convex: 0.12”(3mm) Concave: 1.2” (30mm)

• Min. substrate thickness:Ferrous: 20 mils (0.5mm)Non-ferrous: 2 mils (50 mm)

• Calibration:Zero Calibration/Foil calibration* Max. Surface temperature of test object:

302 degrees F(contact time max is 2 seconds)

• Power source: 4-AAA batteries• Dimensions: 161 x 69 x 32mm• Weight: 9oz. (260g)

PTG-3500 & PTG-3550 Coating Thickness GaugesThe PHASE II PTG-3500 series of gages can perform two different methods of calculating thickness measurement by utilizing the characteristics ofboth eddy current and magnetic induction. Testing performance is both non-destructive and extremely accurate. With these state of the art thicknessgages, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magneticconductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with an external probe.The PHASE II PTG-3500 canbe used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.The PTG-3500 utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substratesamples(steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.

5 Year

Warranty

PTG-4500

This sleek integrated coating thickness gauge is capable of measuring coatingson Fe and NFe metallic substrates and has a push button FLIP screen for easyreading while testing upside down.

The PTG-4500 comes with 2 metal zero plates and test specimens for quick andeasy one point calibrations.

Specifications:Measuring Range: 0-1000µm (0-40 mils)Accuracy: +/-2 µm +3%H (H=actual value)

+/-0.1mils +3%H (H=actual value)Display: 3-DigitsMin Measuring Area: 0.2” x 0.2” (5mm x 5mm)Min Substrate Thickness: Fe: 20mils(0.5mm)

NFe: 2 mils (50mm)Calibration: Zero Calibration

Foil CalibrationMax Surface Temp: 302ºF (2 second max)Power Source: 1pc AAA Battery

5 Year

Warranty

Features:•Heavy-Duty Construction• Direct Dial Readings in lbs/kg• Extreme Accuracy to +/- 1%• Designed for tension/compression measurements• Versatile range of gages are supplied in complete test kit

form containing full set of accessories and carry case.•Can be hand-held or mounted to optional test stand

Model No. Capacity Resolution

AFG-0100 2 lb / 0.90kg 0.01

AFG-0200 5 lb / 2.26kg 0.025

AFG-0300 10 lb / 4.53kg 0.05

AFG-0400 20 lb / 9.07kg 0.1

AFG-0500 50 lb / 22.67kg 0.25

AFG-0600 100 lb / 45.36kg 0.5

5 Year

Warranty

Features:• Heavy-Duty Construction• Extreme Accuracy to +/- 0.5%• Designed for tension/compression measurements• Min/Max Setting with Go/No Go Light Feature• Peak value controls• Auto weight conversion• Versatile range of gages are supplied in complete test kit

form containing full set of accessories and carry case.• Can be hand-held or mounted to optional test stand

Model No. Capacity Resolution

DFG-01002 N7.19 oz203.94 g

0.001N0.001oz0.0001kg

DFG-02005 N17.99 oz509.85 g

0.001N0.001oz0.0001kg

DFG-030010 N2.25 lb1 oz

0.005N0.0005 lb0.005 oz

DFG-040050 N11.24 lb5.10 kg

0.01N0.001 lb0.001 kg

DFG-0500100 N22.48 lb10.19 kg

0.05N0.005 lb0.005 kg

DFG-0600500 N112.40 lb50.99 kg

0.1N0.01 lb0.01 kg

DFG-07001000 N224.80 lb101.97 kg

0.5N0.05 lb0.005 kg

5 Year

Warranty

SENSOR FOR DFG-0700

Features:• Universal design enables user the ability to test multiple

physical properties such as insertion, withdrawal, tension,compression and fracture type tests.

Dimensions:Length: 9.25” (235mm)Width: 5.98” (152mm)Height: 15.75” (400mm)Weight: 22 lbs

AFG-1000

5 Year

Warranty

Optional 90° AdapterPart No. RGB1000-090

Features:• Portable, rugged design enables user to view critical

components in high resolution through access holes as smallas .160” (4mm).

• Utilizes a high intensity tungsten halogen light sourceoperated by 2 AA batteries.

• Built-in light source affords user extreme versatilityanywhere in the shop.

• Supplied with Custom Fitted Carry Case.

Model No. DescriptionRGB-1000 7” Rigid Borescope KitRGB1000-090 90° adapter for 1000RGB-1700 17” Rigid Borescope KitRGB1000-090 90° adapter for 1700

Dimensions RGB-1000 RGB-1700Working Length 7” 17”

Overall Length 9” 19”

Diameter of tube .160” (4mm) .160” (4mm)

Field of View 65° Wide Angle 65° Wide Angle

5 Year

Warranty

DVM-0500 — MM, DVM-0600 — INCHThe DVM-0500/600 is a hand held device that is designed to aid in the preventative maintenance of machinery or any other objectin motion by picking up vibrational changes over a period of time. Commonly used to check balance, misalignment of bearings.Useful features include last value hold and auto shut off make the DVM-0500/600 a must have for maintenance personnel.

Mesuring Range RMS Vibration velocity 0.1mm/s to 199.9 mm/s

Frequency Range 10Hz to 1000Hz

Display 3.5 digit LCD

Accelerometer IntegratedPower Supply 1.5v button cell batteries (2)Operating Temp 0-40ºC <86%RHDimensions 150 x 22 x 18mmWeight 55g

DVM-0500/0600 comes complete with Certificate of Calibration,Operation Manual and Carry Case.

5 Year

Warranty

Features:• Quick accurate analysis for checking balance and alignment of a rotating object.• Large LCD display• Statistics: Mean, Max, MIN, No. of Measurements and Std deviation• Inch/Metric Conversion with the push of a button• Max Hold Function• Regulated Output(AC output 2.0v peak full scale

DVM Includes:• 1-Powerful Magnet• 1-Accelerometer• 1-Stinger Probe (cone)• 1-Stinger Probe (Ball)• Operation Manual• Carry Case

Multi-functional meter is capable of measuringVelocity, Acceleration, Displacement and RPM Frequency.

Model No. Description

DVM-1000 Digital Vibration Tester

Acceleration<None>Peak Value: 0.1 – 200 m/sor 0.3-656 ft/m/s

Frequency Range: 10Hz-1KHzFrequency Range: 10Hz-10KHz

Velocity(RMS)RMS: 0.1-400 (mm/s)or 0.004 -16.0 inch/s

Frequency Range: 10Hz-1KHz

DisplacementPeak to Peak: 0.001 – 2.0(mm)or 0.04-80mil

Frequency Range: 10Hz-500Hz

RPM Frequency 5-100,000 r/minFrequency 0.1 – 10KHzAccuracy <5%Operating Temp 0-45°CPower 4-AAA BatteriesDimensions 161 x 69 x 32mmWeight 300g

5 Year

Warranty

“The Source of Quality”

21 Industrial Ave. Upper Saddle River, NJ 07458Phone: 201-962-7373 • Fax 201-962-8353

www.phase2plus.comemail: [email protected]

We take pride in the products we sell and the services we provide:

• Instrumentation that is engineered for accuracy and dependability

• New product development and innovation

• Access to calibration/certification services

• Highest level of customer satisfaction

• Expert technical assistance

• On-time delivery

• Website: www.phase2plus.com for access to our complete productline as well as our tradeshow schedule manuals and tables.

• 5-Yr Warranty against mfr defects on all instruments expect forconsumable parts

• International product sourcing:Refer to our website www.phase2plus.com for detailed information.Call us for more information.

We guarantee that your product will be manufactured to thehighest degree of quality and shipped according to schedule.

Thank you for your continued supportand we look forward to serving you in the future.

MAIN HEADQUARTERS U.S.APhase II Machine & Tool, Inc.21 Industrial Ave.Upper Saddle River, NJ. 07458 USATel: (201) 962-7373Fax: (201) 932-8353General E-Mail: [email protected]

BEIJING, CHINAPHASE II Instruments (Beijing) Ltd.Room 301,Bldg 2,Qing Yuan Xi Li,HaidianDistrict,Beijing,100192,ChinaTel:+86-10-59792409Fax:+86-10-59814851E-mail: [email protected]

MEXICOPhase II de MexicoCalle A No. 4 Promer PisoCol. San Marcos AzcapotzalcoC.P 02020 MexicoTel: 011-525-5538-39771Fax: sameGeneral E-mail: [email protected]

VENEZUELAPhase II Herramientas Universales EDCM. CA.Av. Francisco Lazo Marti CCPlaza Santa Monica PB LocalSanta Monica, Caracas 1040 VenezuelaTel: 212-690-28-21Fax: 212-693-29-16E-mail: [email protected]

CALL TODAYfor your

TOOLING & MEASURINGCATALOG

Date post:	21-Apr-2015
Category:	Documents
Upload:	abdullah-faruk-goenuellue
View:	208 times
Download:	1 times

2012 Catalog-phase II (1)

Documents