355 - NEMA Multicatalogue New

5/27/2018 355 - NEMA Multicatalogue New

1/83

NEMA Motor Catalog

Transforming eneinto solutions


2/83

Fan CoverSteel covers on 143T up to 215Tframes and cast iron on frames254T and up.

BearingsAll 3600RPM and 1800RPM motors are supplied with ballbearings as standard. Roller bearings are supplied on

frames above 404T, 1200RPM and 900RPM. Thebearings are dimensioned to ensure long life to the motor,even under heavy working conditions. Positive pressurelubrication system includes a drain plug that allows theoutflow of excess grease on 254T frames up to 586/7.

EyeboltFor easy handling, motors 184Tframes and larger are provided withan eyebolt. Footless motors areprovided with two eyebolts.

NameplateStainless steel nameplatecontains a complete andpermanent record of all motordata (according to NEMArequirements.

FrameMade of FC-200 cast iron, with external f ins formaximum cooling effect.

Rotor

Aluminum die cast into a magnetic steellamination for low electric losses.Dynamically balanced for smooth operation,reduced vibration and noice.

EndshieldsMade of cast iron, with externalfins for heat dissipation.They also have polished bearinghousings for longer bearing life

Drain PlugsProvided withautomatic drain plugthat quickly drainscondensation.

V-Ring SlingerIn both endshields to protectbearings and motor from theaggressive components presentin the environment.

ShaftMade of ASTM 1045 carbon steel. It is thermallytreaded to minimize internal stress, to resist bendingand fatigue caused by torsion and flexing.Roller bearings motors use 4140 alloy steel for extratorsional strength on applications.

StatorMade of silicon steel laminationsthermochemically treated to improvethe electric characteristics, reducingelectric losses and the operatingtemperature.

WindingAll copper winding wire enameled with class Hpolyester varnish. The winding is insulated on statorslots and between the coil phase with class Hinsulating materials of high dielectric rigidity and solventfree polyester resin excellent mechanical resistance.

Terminal BoxOversized, cast iron construction.Gasketed lid and between box and frame. NPTthreads holes to connect conduit or cable glands.

Fan

Made of rigid plastic from frames143T up to 326T and aluminumfrom frames 364T up to 586/7. Nonsparking, non toxic, resistant toenvironmental conditions, andensures low noise operation.


3/83

GENERAL PURPOSE SINGLE PHASE MOTORS -ODP (IP22) or TEFC (IP55)

ODP (IP22)General Features ......................................................... 01Electrical Data ..............................................................02Mechanical Data .......................................................... 03

TEFC (IP55)General Features ......................................................... 01Electrical Data ..............................................................03Mechanical Data ......................................................03-04

GENERAL PURPOSE THREE PHASE MOTORS -ODP (IP21/IP23)

High Efficiency (ODP IP21/IP23)General Features ......................................................... 05Electrical Data ..............................................................06Mechanical Data .....................................................09-10

NEMA Premium Efficiency (ODP IP21/IP23)General Features ......................................................... 07Electrical Data ..............................................................08Mechanical Data .....................................................09-10

GENERAL PURPOSE THREE PHASE MOTORS -TEFC (IP55)

Standard Efficiency (TEFC IP55)General Features ..........................................................11Electrical Data .........................................................12-13Mechanical Data .....................................................20-21

High Efficiency (TEFC IP55)General Features ..........................................................14Electrical Data .........................................................15-16Mechanical Data .....................................................20-21

NEMA Premium Efficiency (TEFC IP55)General Features ......................................................... 17Electrical Data .........................................................18-19Mechanical Data .....................................................20-21

THREE PHASE BRAKE MOTORS TEFC (IP55)Standard Efficiency (TEFC IP55)

General Features ......................................................... 22Electrical Data ..............................................................23Mechanical Data .......................................................... 25

High Efficiency (TEFC IP55)General Features ......................................................... 22Electrical Data ..............................................................24Mechanical Data .......................................................... 25

Additional Information ............................................. 26-27

THREE PHASE TRU-METRIC FRAME MOTORS TEFC (IP55)Aluminum Motors TEFC (IP55)

General Features ......................................................... 28Electrical Data 60Hz .....................................................30Electrical Data 50Hz (380V) .........................................31Electrical Data 50Hz (415V) .........................................32Mechanical Data .......................................................... 33

Cast Iron Frame TEFC (IP55)General Features ......................................................... 28Electrical Data 60Hz ............................................... 34-35Electrical Data 50Hz (380V) ................................... 36-37Electrical Data 50Hz (415V) ................................... 38-39Mechanical Data .....................................................40-41

THREE PHASE EXPLOSION PROOF MOTORS TEFC (IP54)Standard Efficiency TEFC (IP54)

General Features ......................................................... 42Electrical Data .........................................................43-44Mechanical Data .....................................................47-48

High Efficiency (TEFC IP54)General Features ......................................................... 42Electrical Data .........................................................45-46Mechanical Data .....................................................47-48

THREE PHASE INVERTER DUTY MOTORS TEBC (IP55)High Efficiency (TEBC IP55)

General Features ......................................................... 49Electrical Data ........................................................ 50-51Mechanical Data .....................................................52-53

THREE PHASE CLOSE-COUPLED PUMP MOTORS -JM and JP TYPE

Standard Efficiency ODP (IP21/IP23)General Features ......................................................... 54Electrical Data ..............................................................55Mechanical Data .....................................................58-59

High Efficiency ODP (IP21/IP23)General Features ......................................................... 56Electrical Data ..............................................................57Mechanical Data .....................................................58-59

THREE PHASE CLOSE-COUPLED PUMP MOTORS -JM and JP TYPE

Standard Efficiency TEFC (IP55)General Features ......................................................... 60Electrical Data ..............................................................61Mechanical Data .....................................................58-59

High Efficiency TEFC (IP55)General Features ......................................................... 62Electrical Data ..............................................................63Mechanical Data .......................................................... 64

THREE PHASE P-BASE MOTORSStandard Efficiency TEFC (IP55)


High Efficiency TEFC (IP55)General Features ......................................................... 65Electrical Data ..............................................................67Mechanical Data .......................................................... 68

THREE PHASE OIL WELL PUMPING MOTORS DESIGN DODP (IP21/IP23)


TEFC (IP55)General Features ......................................................... 69Electrical Data ..............................................................71Mechanical Data .......................................................... 72

TEFC (IP55) TRIPPLE RATEDGeneral Features ......................................................... 69Electrical Data ..............................................................71Mechanical Data .......................................................... 72

THREE PHASE TWO SPEED DAHLANDER TEFC (IP55)Constant Torque TEFC (IP55)


Variable Torque TEFC (IP55)General Features ......................................................... 73Electrical Data ..............................................................75Mechanical Data .......................................................... 76

THREE PHASE SAW ARBOR MOTORS TEFC (IP54)Constant Torque TEFC (IP55)


Table of Contents


4/83

MOTORS COVERED BY EPAct 92

Important Facts About WEG Motors and the Energy Policy Act-EPAct

The Department of Energys Energy Policy Act (EPAct 92) became effective October 24, 1997. The purpose isconservation, since electric motors represent a major portion of electrical energy consumption. Also, the adoption ofenergy efficiency motors is expected to reduce the need for new power plants.

Originally, EPAct covered motors were defined as follows:

General Purpose (NEMA and IEC) 1 to 200 HP 3600, 1800 and 1200 RPM

NEMA-T frame NEMA Design A or B 60Hz - 230 and 460 Volts

TEFC or ODP Continuous duty rated Three-phase

Explosion Proof Squirrel cage induction

Foot-mounted Thermally protected

Ball or Roller bearings

Finding this definition too loose, the Department of Energy provided in June 20, 1997 a guidance to electric motormanufacturers in order to help them to identify what motors are considered general purpose, definite purpose orspecial purpose. The DOE classified the motors into these categories:

Category I - General purpose as defined by EPAct and applicable from October 24, 1997.Category II - Definite purpose that can be used in most general purpose applications.

EPAct will be applicable from October 25, 1999 on.Category III, IV and V - Motors not covered by EPAct (definite and special purpose motors).

250HP and up (above EPAct) Two-speed motors 900RPM and lower Brake motors

NEMA Design C or D Inverter duty motors

DC motors Single-phasemotors

Close-coupled JM, JP and P-Base motors Fractional horsepower motors

If you are unsure whether your motor application is covered by EPAct, please contact WEG for clarification.

All WEG High Efficiency motors meet EPAct levels.

WEGs NEMA Premium Efficiency line exceeds EPAct levels. WEG may have some standard efficiency motors in stock that were manufactured before EPAct rules took effect.

These motors may still be available.

Standard efficiency motors are still available on a custom basis for installation outside the United States.

Standard efficiency motors covered by EPAct cannot be sold for application within the United States. These motorsare, however, available for export.

MOTORS NOT COVERED BY EPAct 92

WEG POLICY

MOTORS FOR EXPORT


5/83

General Purpose Single Phase MotorsODP (IP22) or TEFC (IP55)

01

ODPTEFC

Starting capacitors, cast iron frames, rigid base and

oversized ball bearings to ensure extended motor life

are all standard features.

Remember to considered ambient temperatures and

that ODP are suitable where dirt and moisture are at

minimum. TEFC motors are specially designed foroperating in environments of dirt, dust and excess

moisture.

Applications

Pumps

Fans

Conveyors

Blowers

Air compressors

Refrigeration equipment

Industrial equipment

Milling machines

Tools

Farm equipment*

Aereation equipment

Other moderate-to-high starting

torque applications.

Single-phase, II, IV and VI pole, 60Hz

Squirrel cage rotor / Aluminum die cast

NEMA dimensions

Ball bearings

Insulation Class F

High starting torque

Continuous Duty (S1)

104F (40C) ambient temperature

Altitude: 3300 ft (1000 m)

1045 carbon steel shaft

F1 mounting T-Box

NPT threaded terminal box

Stainless steel nameplate

Paint: Enamel alkyd resin base

Color: RAL 7022 - Dark Gray

Only for ODP (IP22):

Voltage: 208-230V or 115/208-230V

Service Factor: 1.25

Only for TEFC (IP55):

Voltage:

1HP up to 3HP: 115/208-230V or

208-230/460V

5HP up to 10HP: 230V or 230/460V

143/5T steel plate frames

182T up to 215T cast iron frames


Automatic drain plugs

V-ring slingers on both endshields

Special voltages

Flange mounted

Specially designed shaft

Second shaft end

Thermistors or thermostats

Stainless steel shaft

Drip cover (canopy) for shaft down

Applications

Standard Features Optional Features

R

APPROVED BY APPROVED

LR 38324


6/83

GeneralPurpose

SinglePhaseMotors

ODP(IP22)

02

General Purpose Single Phase MotorsODP (IP22)

Electrical Data

HP kW At 115V At 230V(kVA

Code)(Il/In ) 50 75 100 50 75 100 Hot Cold

Rated

Output NEMA

Frame

Full

Load

Speed

(RPM)

Full Load Current

In (A)

Locked Rotor

CurrentFull Load

Torque Tn

(lb.ft)

Locked

Rotor

Torque

(Tl/Tn )

Break

Down

Torque

(Tb/Tn )

% of full loadSound

dB(A)

Efficiency Power Factor Cos Service

Factor

SF

Moment of

Inertia

WK2

(lb.ft2

)

Allowable Locked

Rotor Time (s) Approx.

Weight (lb)

2E 2F H BA S R ES N-W U D.E. O.D.E.

182T 4.500 5.905 14.448

184T 5.500 6.889 14.870

NEMAFRAMES

NPT1" A48.968 1.772 0.250 0.984 6206-ZZ 6205-ZZ1.771 2.750 1.125 7.925

BEARINGS

7.500 0.406 2.750 8.653 4.500 0.500 1.929 1.850 9.382

SHAFT EXTENSIONAB AA d1O P T

KEYWAYD G J K

MOUNTINGA B C

NUMBER TAP SIZE

182T

184T 2.6254 UNC1/2"x13 0.250 0.1252.750 7.250 8.500 8.750

"C" FLANGE DIMENSIONS

BA AJ AK BDBF

BB BC AHNEMA

FRAME

C FLANGE

1)Notes: Special T-Box (three phase line) and capacitor caps.

2) Also available in 115V (115/208-230V). All dimensions are in inches. The above values are subject to changes without prior notice.

Flange Dimensions

Mechanical Data

3520 182T2) 30.0 15.0 H 5.60 4.40 2.4 2.2 70.0 77.0 78.0 0.64 0.74 0.80 0.22069 6 13 73 60

1745 184T

2)

34.0 17.0 K 6.70 8.89 2.7 2.2 68.0 71.0 72.0 0.59 0.71 0.80 0.31798 6 13 73 603510 184T - 21.0 G 6.50 7.43 2.6 2.6 79.0 81.0 82.0 0.92 0 .94 0.95 0.30849 6 13 99 60

1750 184T1) - 24.5 J 6.80 14.9 2.6 2.4 74.0 77.0 81.6 0.65 0 .76 0.80 0.36544 6 13 99 60

7.5 5.5 3520 184T - 30.6 H 7.00 11.0 2.2 2.3 75.0 82.0 85.0 0.86 0.91 0.92 1.25 0.30374 6 13 108 60

1.25

1.25

3 2.2

3.75


7/83

Electrical Data

General Purpose Single Phase MotorsTEFC (IP55)

03

HP kW At 115V At 230V(kVA

( I /I ) 50 75 100 50 75 100 Hot Cold

Rated OutputNEMA

Frame

Full Load

Speed

(RPM)

Full Load Current

In(A)

Locked Rotor

CurrentFull Load

Torque

Tn(lb.ft)

Locked

Rotor

Torque

(T /T )

Break Down

Torque

(Tb/Tn)

Allowable

Locked Rotor

Time (s)

Approx.

Weight

(lb)

Soun

dB(A% of full load


Factor

SF

Moment of

Inertia

WK2(lb.ft

2)

Notes: The values shown are subject to change without prior notice.

Mechanical Data

FOR NEMA 56 AND 143/5T FRAMES

2E 2F H H1 BA S R ES N-W U D.E. O.D.E

B56 11.457 6203-ZZ

D56 12.638

F56H 13.819

G56H 14.212

F143/5T 14.834

G143/5T 15.228

NEMA FRAMES B

1.874

0.766

XO

7.165 7.323

KEYWAY

0.187

0.517

SHAFT EXTENSIONAB AA

0.625

5.433

NPT1/2"

NPT3/4"

BEARINGSMOUNTINGA

3.000

0.343

1.220

5.000

5.500

C D O P

-

2.750

6.535

4.016

3.500

6.498

2.250 1.417 2.250 0.875

1.064

1.102

6202-Z

6204-ZZ

6203-Z

6205-ZZ

4.875

Code)l n

3480 B56 4.30 2.15 M 5.20 0.36 2.8 3.0 32.0 44.0 50.5 0 .61 0.67 0.73 1.15 0.02373 6 13 20 55

1750 B56 4.60 2.30 N 5.50 0.72 3.6 3.0 43.0 51.5 55.6 0 .46 0.53 0.62 1.15 0.05458 6 13 20 50

1160 B56 5.00 2.50 M 4.60 1.09 2.3 2.5 46.0 54.0 55.2 0 .40 0.50 0.58 1.15 0.08068 6 13 23 503500 B56 5.70 2.85 M 5.50 0.50 3.2 3.0 46.0 49.0 52.5 0 .58 0.66 0.70 1.15 0.02848 6 13 22 55

1750 B56 6.00 3.00 N 5.80 1.01 3.4 2.8 45.0 53.0 57.3 0 .46 0.56 0.62 1.15 0.06360 6 13 21 55

1160 D56 5.60 2.80 K 4.50 1.52 2.3 2.5 51.0 57.0 61.8 0 .47 0.57 0.61 1.15 0.10916 6 13 26 50

3500 B56 7.60 3.80 L 5.60 0.75 3.4 3.0 44.0 51.0 57.0 0.60 0.70 0.74 1.15 0.03275 6 13 23 55

1750 B56 7.70 3.85 M 5.80 1.49 3.4 2.8 49.0 56.0 63.0 0 .44 0.54 0.65 1.15 0.07356 6 13 23 55

1180 D56 6.60 3.30 K 5.70 2.21 2.5 2.4 60.0 69.0 71.3 0 .55 0.64 0.68 1.15 0.14475 6 13 36 50

3490 B56 10.2 5.10 M 6.40 1.11 3.0 2.9 52.1 60.3 65.2 0 .54 0.64 0.72 1.15 0.04105 6 13 28 55

1745 B56 10.6 5.30 M 6.20 2.22 3.1 2.5 58.5 65.0 68.3 0 .47 0.58 0.66 1.15 0.09017 6 13 26 55

1170 F56H 9.80 4.90 K 5.50 3.31 2.3 2.5 58.7 67.0 71.0 0.48 0.57 0.69 1.15 0.18035 6 13 40 50

3500 D56 12.6 6.30 M 7.10 1.51 3.2 3.0 59.0 64.0 67.7 0 .56 0.68 0.75 1.15 0.05221 6 13 30 55

3500 F143/5T 12.6 6.30 M 7.10 1.51 3.2 3.0 59.0 64.0 67.7 0.56 0.68 0.75 1.15 0.05221 6 13 30 55

1750 D56 14.0 7.00 M 6.40 3.02 3.2 2.6 58.0 64.0 68.0 0 .50 0.60 0.67 1.15 0.12340 6 13 34 55

1750 F143/5T 14.0 7.00 M 6.40 3.02 3.2 2.6 58.0 64.0 68.0 0.50 0.60 0.67 1.15 0.12340 6 13 34 55

1150 G56H 11.0 5.50 J 6.00 4.60 2.4 2.2 64.0 69.0 72.7 0.63 0.72 0.80 1.15 0.21832 6 13 52 5011.0 5.50 J 6.00 4.60 2.4 2.2 64.0 69.0 72.7 0.63 0.72 0.80 1.15 0.21832 6 13 52 501150 G143/5T

3500 D56 17.0 8.50 K 6.80 2.21 2.5 2.8 64.0 69.0 70.0 0 .61 0.72 0.80 1.15 0.06170 6 13 34 55

3500 F143/5T 17.0 8.50 K 6.80 2.21 2.5 2.8 64.0 69.0 70.0 0.61 0.72 0.80 1.15 0.06170 6 13 34 55

1750 F56H 18.0 9.00 J 5.50 4.43 3.0 2.6 66.0 70.0 72.0 0.52 0.62 0.74 1.15 0.18035 6 13 46 55

1750 G143/5T 18.0 9.00 J 5.50 4.43 3.0 2.6 66.0 70.0 72.0 0.52 0.62 0.74 1.15 0.18035 6 13 46 55

1170 W182/4T 15.4 7.70 H 6.00 6.63 2.2 2.3 68.0 76.0 80.0 0.63 0.72 0.78 1.15 0.34575 6 13 88 60

1175 182/4T 19 9.50 K 7.50 6.60 2.2 2.3 68.0 75.0 80.0 0.68 0.78 0.80 1.15 0.44640 6 13 88 50

3490 F56H 20.4 10.2 K 7.20 3.03 2.7 2.6 70.0 73.0 75.0 0.66 0.75 0.84 1.15 0.08068 6 13 42 55

3490 G143/5T 20.4 10.2 K 7.20 3.03 2.7 2.6 70.0 73.0 75.0 0.66 0.75 0.84 1.15 0.08068 6 13 42 55

1750 G143/5T 21.6 10.8 K 6.50 6.04 2.8 2.6 69.0 72.0 74.0 0.58 0.69 0.80 1.15 0.19933 6 13 51 55

1750 G56H 21.6 10.8 K 6.50 6.04 2.8 2.6 69.0 72.0 74.0 0.58 0.69 0.80 1.15 0.19933 6 13 51 55

1160 W213/5T 20.0 10.0 K 7.00 9.11 2.4 2.3 68.0 75.0 80.0 0.68 0.75 0.80 1.15 0.53155 6 13 108 60

3500 G143/5T 27.0 13.5 H 6.50 4.43 2.5 3.0 68.0 74.0 78.8 0.75 0.82 0.90 1.15 0.08068 6 13 49 60

3500 G56H 27.0 13.5 H 6.50 4.43 2.5 3.0 68.0 74.0 78.8 0.75 0.82 0.90 1.15 0.08068 6 13 49 55

3480 W182/4T 27.0 13.5 J 7.20 4.46 2.8 2.6 77.0 77.0 78.8 0.81 0.87 0.91 1.15 0.15187 6 13 77 55

1750 W182/4T 29.0 14.5 J 7.00 8.86 2.9 2.4 69.0 75.0 77.2 0.72 0.80 0.86 1.15 0.23730 6 13 73 60

1745 184T 28.0 14.0 J 7.20 8.89 3.0 2.6 72.0 76.0 78.0 0.78 0.85 0.88 1.15 0.31561 6 13 121 55

1745 W213/5T 28.0 14.0 J 7.20 8.89 3.0 2.6 72.0 76.0 78.0 0.50 0.85 0.88 1.15 0.31561 6 13 128 55

1165 W213/5T 26.0 13.0 G 6.00 13.3 2.3 2.2 71.0 78.0 82.0 0.84 0.89 0.90 1.15 0.61935 6 13 126 60

3490 184T 42.0 21.0 H 7.00 7.47 2.8 2.6 76.0 80.0 83.0 0 .78 0.87 0.92 1.15 0.19530 6 13 106 60

1730 184T 42.0 21.0 H 7.00 15.1 2.9 2.4 76.0 78.0 79.4 0 .91 0.93 0.95 1.15 0.42714 6 13 143 55

1730 W213/5T 42.0 21.0 H 7.00 15.1 2.9 2.4 76.0 78.0 79.4 0.91 0.93 0.95 1.15 0.44375 6 13 150 55

1160 215T 44.0 22.0 H 6.50 22.5 2.2 2.3 78.0 82.0 83.0 0 .80 0.86 0.88 1.15 1.78450 6 13 168 60

3495 184T 62.0 31.0 H 7.00 11.1 2.8 2.6 78.0 83.0 84.0 0 .82 0.89 0.92 1.15 0.57664 6 13 121 60

3495 W213/5T 62.0 31.0 H 7.00 11.1 2.8 2.6 78.0 83.0 84.0 0.82 0.89 0.92 1.15 0.57664 6 13 126 60

1730 215T 68.0 34.0 H 6.50 22.4 2.9 2.4 77.0 80.0 82.0 0 .69 0.80 0.86 1.15 0.90649 6 13 154 60

3510 215T 78.0 39.0 G 7.00 15.1 2.0 2.6 82.5 83.5 86.3 0 .93 0.94 0.95 1.15 0.57664 6 13 159 601720 215T 80.0 40.0 H 7.60 30.7 2.7 2.4 80.0 82.0 83.0 0 .90 0.94 0.96 1.15 1.18650 6 13 165 60

l n

1.5 1.1

0.25 0.18

0.33 0.25

0.5 0.37

0.550.75

5 3.7

7.5 5.5

10 7.5

2 1.5

3 2.2

1 0.75


8/83

D FLANGE

NUMBER TAP SIZE

B56

D56

F56H

G56H

F143/5T

G143/5T

NEMA FRAMES AJ AK BDBF

BB AH

5.875 4.500 6.535 4

UNC

0.157

2.063

3/8"x

16 2.125

GeneralPurpose

SinglePhaseMotors

TEFC(IP55)

04

General Purpose Single Phase MotorsTEFC (IP55)


4.500

184T 17.050 1.968 7.835 6307-ZZ

215T 19.500 2.165 10.630 9.055

NEMA FRAMESMOUNTING

A B C D G J K O P TKEYWAY SHAFT EXTENSION

AB AA d1BEARING

W182/4T7.500

0.406

2.750

5.500

1.890 2.441

8 .6 61 6 .9 68 17.240

4.500

6206-ZZ

1.771 2.750 1.125 7.362

7.953NPT 1" 6308- ZZ1.375

A4

6206-ZZ7.8001 .8 51 0 .2 50 1 .2 34

8.82021.000

5 .250 0 .830

NPT3/4"0.630 8.267

1.516 2.480 3.3753.343W213/5T

8.500 3.500 9.7657.000

9.6102.000 1.890 0.3128.875

N UMB ER TAP SI ZE

W182/4T

184T

W213/5T

215T


AJ AK BDBF

BB BC AHNEMA FRAMES

0.250 3 .120

1/2"x13

7.250 8.500 8.860 4

UNC

0.250

N UMBE R TA P S IZE

W182/4T

184T

W213/5T

215T

BDBF

BB

"D" FLANGE DIMENSIONS

AJ AKNEMA FRAMES

0 .5 90 0 .1 9010.000 9.000 11.000 4

Notes: All dimensions are in inches.

The above values are subject to changes without prior notice.

Flange Dimensions

FOR 182/4T AND 213/5T FRAMES

C FLANGE

C FLANGE

Flange Dimensions


9/83

WEG Open Drip Proof (ODP) motors are designed for environments where dirt andmoisture are minimal and provide maximum ventilation and heat dissipation. Design Btorque and high efficiency design from 143T through 444/5T frames.

These High Efficiency motors are specifically designed to meet or exceed all EPAct

requirements for energy efficiency. They are certified by the Department of Energywith our Certificate of Compliance number CC029A.

General Purpose Three Phase MotorsODP (IP21/IP23)High Efficiency

05

Cast iron model

Applications

Pumps

Fans

Kneader and mixer machines

Cutter and sawing machines

Pressing machines


Conveyors

Blowers

Compressors

Machinery

Cranes

Packaging Equipment

Efficiency Certification number CC029A

according to US Department of Energy

Regulations for EPACT Efficiency levels

Three-phase, II, IV and VI pole, 60Hz

Voltage: 208-230/460V, 200V, 460V or 575V

Open drip proof (ODP)

NEMA dimensions

NEMA design B ratings


Class F insulation for all frames, allo

insulation materials are class H (180 C)

except motor leads (Class F)

Continuous Duty (S1)o o

104 F (40 C) ambient temperature

1045 heat treated and stress relieved

carbon steel shaft (4140 for roller

bearing motors)

All 3600RPM and 1800RPM motors are

supplied with ball bearings as standard.

Roller bearings are supplied as standard

on frames above 404T, 1200RPM

F1 mount (also available flanged motors)

Paint: Enamel alkyd resin base

Color: RAL 5007 - Blue


Stainless steel nameplate - laser etched

Cable glands

Special voltages

Cast iron NEMA C-flange or D-flange

(D-flange only for frames 254T and up)


Second shaft end

Thermistors, thermostats or RTDs

(PT100)

Roller bearings on drive end

IEC metric frames (on request) for

frame 254T up to 445T


Frame - Specific Features

FOR FRAME 143/5T UP TO 213/5T ONLY

Welded steel plate frames (welded feet)

Cast iron endshields fixed with through

bolt construction

ZZ bearings (double shielded)

Degree of protection: IP21

182/4T AND 213/5T FRAMES ONLY

Aluminum endshields and terminal box

Cooling system with finned rotor

FOR FRAME 254/6T AND UP

Cast iron frames

Cast iron endshields and terminal box


All 3600RPM and 1800RPM motors

are supplied with ball bearings as

standard. Roller bearings are supplied

as standard on frames 404T up to 445T,

1200RPM

Winding temperature detector

(1 per phase) - thermistors from

frame 324T up to 445T; andthermostats from frame 4407 and

Regreasable bearings positive

pressure lubrication system (fram

254T and up)


Note:All motors are tested according to IEEE 112 std. - method B or C390 CSA

All WEG motors are energy efficiency verified by UL in addition to the DOE.R

APPROVED

LR 38324

APPROVED BY


10/83

Mechanical Data

Electrical Data

GeneralPurposeThreePhaseMotors

ODP(IP21/IP23)

HighEfficiency

General Purpose Three Phase MotorsODP (IP21/IP23)High Efficiency

06

HP kW At 230V At 460V At 575V(kVA

(I /I ) 50 75 100 50 75 100 Hot Cold

Allowable locked

Rotor Time (s)Approx.

Weight

(lb)

Sound

dB(A)% of full load


Factor

SF

Moment of

Inertia

WK2(lb.ft

2)

Rated Output Full Load

Speed

(RPM)

NEMA

Frame

Full Load Current

In(A)

Locked Rotor

CurrentFull Load

Torque

Tn(lb.ft)

Locked

Rotor

Torque

(T /T )

Break

Down

Torque

(T /T )


Mechanical Data Available on page 09.

Code)l n

1730 E143/5T 2.82 1.41 1.13 M 9.00 3.06 3.3 3.2 80.0 81.5 82.5 0.61 0.74 0.81 1.15 0.12719 10 22 33 50

1140 E143/5T 3.46 1.73 1.38 K 6.00 4.64 2.2 2.7 77.0 78.5 80.0 0.45 0.58 0.68 1.15 0.14546 20 44 37 50

3405 E143/5T 3.90 1.95 1.56 K 8.50 2.28 3.0 3.5 80.0 81.5 82.5 0.70 0.80 0.86 1.15 0.04518 15 33 29 581730 E143/5T 4.10 2.05 1.64 K 7.80 4.48 3.0 3.2 82.5 84.0 84.0 0.61 0.73 0.80 1.15 0.14523 12 26 37 52

1150 182T 4.56 2.28 1.82 K 7.00 6.74 2.0 2.7 80.0 82.5 84.0 0.52 0.65 0.72 1.15 0.23825 20 44 44 53

3410 E143/5T 5.04 2.52 2.02 L 9.50 3.10 3.0 3.5 81.5 82.5 84.0 0.78 0.86 0.89 1.15 0.06160 12 26 40 60

1725 E143/5T 5.74 2.87 2.30 L 8.00 6.13 3.0 3.0 82.5 84.0 84.0 0.58 0.70 0.78 1.15 0.16350 13 29 40 52

1150 184T 5.96 2.98 2.38 K 7.00 9.19 2.1 2.7 82.5 84.0 85.5 0.54 0.67 0.74 1.15 0.31774 20 44 60 55

3400 F143/5T 7.30 3.65 2.92 K 8.30 4.56 3.5 3.4 81.5 82.5 84.0 0.80 0.88 0.90 1.15 0.07392 9 20 46 62

1760 182T 7.88 3.94 3.15 K 8.10 8.81 2.4 3.0 82.5 85.5 86.5 0.62 0.74 0.81 1.15 0.25415 14 31 47 53

1165 213T 9.12 4.56 3.65 J 6.00 13.3 1.6 2.5 84.0 85.5 86.5 0.50 0.62 0.70 1.15 0.68983 25 55 66 58

3480 182T 12.2 6.10 4.88 H 7.10 7.49 2.0 2.9 85.5 86.5 86.5 0.73 0.82 0.88 1.15 0.12719 12 26 48 64

1755 184T 12.8 6.39 5.11 J 7.10 14.9 2.1 3.0 84.0 86.5 87.5 0.66 0.77 0.83 1.15 0.31774 13 29 60 55

1160 215T 14.5 7.27 5.82 H 6.00 22.5 1.6 2.2 86.5 87.5 87.5 0.54 0.67 0.73 1.15 1.01185 24 53 96 59

3485 184T 17.9 8.97 7.18 J 7.50 11.1 2.3 3.0 86.5 87.5 87.5 0.78 0.85 0.88 1.15 0.16352 11 24 60 65

1755 213T 18.8 9.40 7.52 H 6.80 22.1 1.8 2.5 85.5 87.5 88.5 0.68 0.78 0.83 1.15 0.91977 8 18 72 58

1175 254T 19.3 9.63 7.70 H 6.30 33.0 1.8 2.5 86.5 88.5 88.5 0.64 0.75 0.81 1.15 2.38581 12 26 232 56

3500 213T 23.6 11.8 9.44 H 7.00 15.1 2.2 2.3 86.5 88.5 88.5 0.78 0.86 0.90 1.15 0.44363 12 26 95 68

1760 215T 25.4 12.7 10.2 H 6.50 30.0 1.8 2.3 86.5 88.5 89.5 0.67 0.78 0.83 1.15 1.01185 9 20 96 59

1175 256T 25.8 12.9 10.3 H 6.20 45.0 1.8 2.5 88.0 89.5 90.2 0.62 0.74 0.81 1.15 2.72681 12 26 251 57

3500 215T 34.2 17.1 13.7 G 6.20 22.1 2.1 3.1 88.5 89.5 89.5 0.84 0.89 0.90 1.15 0.57673 14 31 126 69

1765 254T 37.4 18.7 15.0 G 6.00 43.9 2.2 2.5 89.5 90.2 91.0 0.65 0.75 0.81 1.15 1.54815 14 31 221 59

1180 284T 35.2 17.6 14.1 G 6.20 65.7 1.9 2.3 89.5 90.2 90.2 0.75 0.83 0.87 1.15 5.07205 12 26 353 583530 254T 49.2 24.6 19.7 G 6.00 29.9 1.9 2.5 88.5 90.2 90.2 0.72 0.80 0.85 1.15 0.73297 10 22 179 66

1765 256T 50.4 25.2 20.2 G 5.80 59.9 2.2 2.5 89.5 89.5 91.0 0.66 0.77 0.82 1.15 1.90528 12 26 251 60

1175 286T 48.2 24.1 19.3 F 5.50 90.0 2.2 2.2 90.2 91.0 91.0 0.75 0.82 0.86 1.15 6.54450 18 40 388 58

3530 256T 58.6 29.3 23.4 G 6.00 36.9 2.0 2.5 89.5 90.2 91.0 0.76 0.85 0.87 1.15 0.90744 10 22 225 67

1760 284T 60.2 30.1 24.1 G 6.00 74.1 2.2 2.5 89.5 91.0 91.7 0.68 0.79 0.84 1.15 2.66061 13 29 271 62

1180 324T 61.8 30.9 24.7 G 5.70 110 1.8 2.3 89.5 91.0 91.7 0.67 0.77 0.82 1.15 7.44932 22 48 450 60

3540 284TS 68.0 34.0 27.2 F 6.20 43.8 2.0 2.7 90.2 91.7 92.4 0.81 0.87 0.88 1.15 2.38600 12 26 333 72

1770 286T 71.2 35.6 28.5 G 6.10 87.6 2.5 3.0 90.2 92.4 92.4 0.74 0.81 0.84 1.15 3.40549 13 29 357 63

1180 326T 73.8 36.9 29.5 G 5.80 131 1.8 2.2 90.2 91.7 92.4 0.65 0.76 0.81 1.15 8.93909 30 66 560 60

3535 286TS 91.6 45.8 36.6 G 6.30 59.8 1.8 2.4 91.7 92.4 92.4 0.81 0.87 0.89 1.15 2.35686 16 35 417 73

1765 324T 97.6 48.8 39.0 F 5.20 120 1.8 2.0 91.7 92.4 93.0 0.70 0.79 0.83 1.15 5.72652 24 53 450 64

1180 364/5T 96.4 48.2 38.6 G 6.00 179 1.8 2.2 92.4 93.0 93.0 0.71 0.80 0.84 1.15 18.9876 24 53 728 67

3560 324TS 115 57.7 46.2 G 6.40 73.2 2.2 2.5 91.7 93.0 93.6 0.75 0.83 0.86 1.15 3.51204 28 62 478 74

1765 326T 120 60.2 48.2 F 5.60 148 2.0 2.1 92.4 93.0 93.0 0.72 0.80 0.83 1.15 6.05386 18 40 538 65

1175 364/5T 119 59.4 47.5 G 6.00 222 1.9 2.2 92.4 93.0 93.0 0.71 0.80 0.84 1.15 21.7799 18 40 825 68

3555 326TS 141 70.6 56.5 G 6.00 89.2 2.3 2.8 91.7 93.0 93.0 0.75 0.83 0.86 1.15 4.15061 19 42 564 75

1780 364/5T 140 70.2 56.2 G 6.10 178 2.2 2.6 91.7 93.0 93.6 0.74 0.84 0.86 1.15 12.4559 16 35 633 67

1180 404/5T 142 71.0 56.8 G 6.20 269 2.0 2.3 93.0 93.6 93.6 0.72 0.81 0.85 1.15 27.9231 16 35 882 69

3550 364/5TS 161 80.6 64.5 F 6.30 109 1.8 2.8 93.0 94.1 94.1 0.84 0.90 0.91 1.15 6.81087 15 33 695 80

1780 364/5T 171 85.3 68.2 F 6.10 218 2.4 2.8 93.0 93.6 94.1 0.74 0.82 0.86 1.15 16.1927 17 37 825 68

1180 404/5T 176 87.8 70.2 G 6.10 328 2.0 2.2 93.0 93.6 93.6 0.72 0.81 0.84 1.15 27.9231 14 31 1052 693550 364/5TS 220 110 88.0 F 6.30 149 1.9 3.0 93.6 94.1 94.1 0.86 0.91 0.91 1.15 8.30075 13 29 825 83

1775 404/5T 230 115 92.0 G 6.20 298 2.4 2.5 93.0 93.6 94.1 0.74 0.84 0.87 1.15 19.5141 10 22 882 69

1185 444/5T 250 125 100 F 5.60 446 1.9 2.0 94.1 94.1 94.1 0.65 0.76 0.80 1.15 43.8246 18 40 1486 77

3560 404/5TS 264 132 106 F 6.40 178 1.8 2.7 93.6 94.1 94.1 0.85 0.90 0.91 1.15 9.36481 11 24 931 84

1775 404/5T 274 137 110 F 6.40 357 2.4 2.6 93.0 94.1 94.5 0.75 0.84 0.87 1.15 20.7599 11 24 1052 69

1180 444/5T 300 150 120 F 5.50 538 2.0 2.0 94.1 94.1 94.1 0.66 0.76 0.80 1.15 70.8986 20 44 1740 78

3555 404/5TS 318 159 127 F 6.40 218 1.9 3.0 93.6 94.1 94.5 0.87 0.91 0.92 1.15 11.9189 10 22 1246 84

1780 444/5T 330 165 132 G 6.40 436 2.4 2.6 93.6 94.5 95.0 0.75 0.85 0.88 1.15 35.2504 19 42 1235 77

1185 444/5T 366 183 146 F 5.70 654 2.0 2.0 94.5 94.5 94.5 0.66 0.76 0.80 1.15 57.1656 18 40 2007 79

3565 444/5TS 442 221 177 G 6.40 297 2.0 2.5 93.6 94.5 94.5 0.83 0.88 0.90 1.15 25.6892 20 44 1537 88

1780 444/5T 440 220 176 G 6.50 594 2.3 2.4 93.6 94.5 95.0 0.80 0.88 0.90 1.15 49.5411 16 35 1740 78

3565 444/5TS 544 272 218 F 6.40 366 2.0 2.5 94.1 94.5 95.0 0.86 0.89 0.90 1.15 30.1568 15 33 1806 88

1780 444/5T 540 270 216 F 6.50 732 2.4 2.5 94.1 95.4 95.4 0.81 0.88 0.90 1.15 57.1628 17 37 2007 79

300 220 3565 444/5TS 646 323 258 F 6.30 435 2.0 2.6 94.5 95.0 95.0 0.84 0.89 0.90 1.15 33.5077 16 35 2007 89

200 150

250 185

125 90

150 110

75 55

100 75

50 37

60 45

30 22

40 30

20 15

25 18.5

10 7.5

15 11

5 3.7

7.5 5.5

2 1.5

3 2.2

1 0.75

1.5 1.1

l n b n


11/83

General Purpose Three Phase MotorsODP (IP21/IP23)

NEMA Premium Efficiency

WEG Open Drip Proof (ODP) motors are designed for environments where dirt andmoisture are minimal. Design B torque and high efficiency design from 143T through444/5T frames. These motors are specifically designed to provide maximumventilation and heat dissipation. C and D flange available.

These Premium Efficiency motors meet or exceed all NEMA Premium and CEErequirements for energy efficiency.

07

Meets CEE Energy Specificatio

Applications

Pumps

Fans

Kneader and mixer machines

Cutter and sawing machines

Pressing machines


Conveyors

Blowers

Compressors

Machinery

Cranes

Packaging equipment

Three-phase, II and IV pole, 60Hz

Voltage: 208-230/460V, 200V, 460V or 575V

Open drip proof (ODP)

NEMA dimensions

NEMA Design B

Service factor: 1.15

Class F insulation for all frames - allo

insulation materials are class H (180 C)

except motor leads (class F)

Continuous Duty (S1)o o




bearing motors)




on frames above 404T, 1200RPM

F1 mount (also available flanged motors

Paint: Synthetic enamel alkyd resin base

Color: RAL 6002 - Green


Stainless steel nameplate - laser etched

Cable glands

Special voltages

Cast iron NEMA C flange available for

all frames or D flange (D flange only

for frames 254T and up)


Second shaft end

Thermistors, thermostats or RTDs

(PT100)


IEC metric frames (on request) - for



Frame - Specific Features

FOR FRAME 143/5T UP TO 213/5T ONLY

Welded steel plate frames (welded feet)

Cast iron endshields with through

bolt construction

ZZ bearings (double shielded)


FOR 182/4T AND 213/5T FRAMES ONLY

Aluminum endshields and terminal box


FOR FRAME 254/6T UP TO 444/5T

Cast iron frames

Cast iron endshields and terminal box


All 3600RPM and 1800RPM motors

are supplied with ball bearings as

standard. Roller bearings are supplied

as standard on frames 404T up to 445T,

1200RPM

Winding temperature detector

(1 per phase) - thermistors from


Regreasable bearings positivepressure lubrication system (frame

254T and up)


Note:All motors are tested according to IEEE 112 std. - method B or C390 CSA

All motors are tested according to IEEE 112 std. - method B or C390 CSA

All WEG motors are energy efficiency verified by UL in addition to the DOE.R

APPROVED

LR 38324

APPROVED BY


12/83

Electrical Data

Gen

eralPurposeThreePhaseMotors

ODP(IP21/IP23)

NEMAPremiumEfficiency


NEMA Premium Efficiency


( I /I ) 50 75 100 50 75 100 Hot Cold


Speed

(RPM)

NEMA

Frame

Full Load Current

In(A)Locked Rotor

CurrentFull Load

Torque

Tn(lb.ft)

Locked

Rotor

Torque

(T /T )

Break

Down

Torque

(T /T )

Allowable

locked Rotor

Time (s)

Approx.

Weight

(lb)

Sound

dB(A)% of full load

Service

Factor

SF

Moment of

Inertia

WK2(lb.ft

2)

08


Efficiency Power Factor Cos

Code)l n

1 0.75 1730 E143/5T 2.90 1.45 1.16 L 8.00 3.06 3.2 3.3 83.0 85.5 85.5 0.54 0.68 0.76 1.15 0.12719 16 35 33 50

1.1 3430 E143/5T 3.80 1.90 1.52 L 9.00 2.26 3.5 3.5 82.5 85.5 85.5 0.67 0.79 0.85 1.15 0.05339 19 42 31 58

1.1 1730 E143/5T 4.14 2.07 1.66 L 8.50 4.48 3.3 3.4 84.5 86.5 86.5 0.56 0.70 0.77 1.15 0.16350 14 31 40 52

1.5 3430 E143/5T 5.12 2.56 2.05 L 9.50 3.08 3.5 3.5 84.0 85.5 86.5 0.68 0.79 0.85 1.15 0.06146 15 33 40 60

1.5 1720 E143/5T 5.66 2.83 2.26 K 7.80 6.15 3.2 3.3 84.5 86.5 86.5 0.56 0.70 0.77 1.15 0.16350 12 26 40 52

2.2 3420 F143/5T 7.18 3.59 2.87 K 9.00 4.53 3.5 3.5 86.5 87.5 87.5 0.75 0.84 0.88 1.15 0.07380 15 33 46 62

2.2 1760 182T 8.12 4.06 3.25 K 8.10 8.81 2.4 3.0 85.5 88.5 89.5 0.54 0.68 0.76 1.15 0.25415 12 26 46 53

3.7 3490 182T 12.3 6.17 4.94 H 7.00 7.47 2.0 2.8 87.5 88.5 88.5 0.68 0.80 0.85 1.15 0.12719 16 35 48 64

3.7 1755 184T 12.8 6.41 5.13 J 7.30 14.9 2.1 2.9 88.5 89.5 89.5 0.63 0.75 0.81 1.15 0.34954 12 26 62 55

5.5 3480 184T 17.9 8.97 7.18 H 7.00 11.1 2.1 2.8 87.5 88.5 88.5 0.73 0.83 0.87 1.15 0.16350 12 26 60 65

5.5 1760 213T 18.1 9.03 7.22 H 7.20 22.0 1.8 2.7 89.0 90.2 91.0 0.68 0.79 0.84 1.15 0.91977 12 26 77 58

7.5 3520 213T 23.6 11.8 9.44 J 8.00 15.0 2.1 2.7 90.2 91.0 91.0 0.76 0.84 0 .88 1.15 0.57664 12 26 121 68

7.5 1760 215T 24.4 12.2 9.76 J 8.10 30.0 2.1 2.9 90.0 91.0 91.7 0.68 0.79 0 .84 1.15 1.19576 9 20 99 59

11 3515 215T 34.8 17.4 13.9 J 8.00 22.1 2.1 2.7 90.2 91.0 91.0 0.73 0.82 0.87 1.15 0.57664 9 20 126 69

11 1775 254T 37.2 18.6 14.9 K 8.50 43.7 2.2 3.3 91.7 92.4 93.0 0.60 0.72 0 .80 1.15 2.08397 14 31 254 59

15 3520 254T 49.2 24.6 19.7 G 6.00 30.0 1.9 2.5 89.5 90.2 91.0 0.71 0.80 0 .84 1.15 0.73278 12 26 179 66

15 1775 256T 50.0 25.0 20.0 K 8.60 59.6 2.3 3.4 91.7 93.0 93.0 0.60 0.72 0 .81 1.15 2.61979 12 26 295 60

18.5 3530 256T 59.6 29.8 23.8 H 6.80 36.9 2.0 2.6 91.0 91.7 91.7 0.73 0.82 0.85 1.15 1.08185 9 20 243 67

18.5 1770 284T 59.8 29.9 23.9 H 6.80 73.7 2.5 2.8 92.4 93.0 93.6 0.67 0.78 0.83 1.15 3.40549 15 33 342 62

22 3530 284TS 70.4 35.2 28.2 H 7.00 43.9 2.2 2.8 91.0 92.4 92.4 0.71 0.81 0.85 1.15 1.88559 10 22 333 72

22 1770 286T 70.8 35.4 28.3 J 8.00 87.6 2.8 3.0 93.0 93.6 94.1 0.67 0.78 0 .83 1.15 4.25693 14 31 419 63

30 3535 286TS 94.2 47.1 37.7 H 7.00 59.8 2.0 2.6 91.7 93.0 93.0 0.74 0.83 0.86 1.15 2.35686 10 22 417 73

30 1775 324T 95.2 47.6 38.1 G 6.20 119 2.2 2.3 93.0 94.1 94.1 0.69 0.79 0.84 1.15 6.54450 28 62 529 6437 3555 324TS 118 59.1 47.3 G 6.40 73.4 2.2 2.6 92.4 93.6 93.6 0.74 0.82 0.84 1.15 3.83121 28 62 496 74

37 1775 326T 123 61.4 49.1 H 6.60 147 2.6 2.6 92.5 94.1 94.5 0.64 0.75 0.80 1.15 7.03547 12 26 573 65

45 3555 326TS 142 71.0 56.8 G 6.20 89.2 2.0 2.6 93.0 93.6 93.6 0.77 0.84 0.85 1.15 4.36347 24 53 582 75

45 1780 364/5T 140 69.9 55.9 J 7.80 178 2.5 3.0 93.0 94.5 95.0 0.70 0.80 0 .85 1.15 16.1926 15 33 825 68

55 3550 364/5TS 163 81.5 65.2 G 6.50 109 1.8 2.8 93.6 94.1 94.1 0.83 0.88 0.90 1.15 6.81075 14 31 695 80

55 1780 364/5T 171 85.5 68.4 H 7.40 218 2.4 3.0 93.6 94.5 95.0 0.70 0.80 0.85 1.15 16.1926 14 31 825 68

75 3550 364/5TS 222 111 88.8 G 6.70 149 1.9 2.8 94.1 94.5 94.5 0.84 0.89 0.90 1.15 8.30075 12 26 825 83

75 1780 404/5T 230 115 92.0 H 7.50 297 2.5 2.9 94.1 95.0 95.4 0.73 0.82 0.86 1.15 20.7597 10 22 1052 69

90 3550 404/5TS 262 131 105 F 6.50 179 1.8 2.8 94.1 94.5 94.5 0.87 0.90 0 .91 1.15 10.2162 11 24 986 84

90 1780 404/5T 276 138 110 J 8.60 356 2.2 3.0 94.5 95.4 95.4 0.73 0.83 0 .86 1.15 26.5726 10 22 1144 69

110 3550 404/5TS 318 159 127 G 7.00 218 1.9 2.9 94.5 94.5 94.5 0.87 0.91 0.92 1.50 11.9189 9 20 1246 84

110 1780 444/5T 332 166 133 G 7.10 436 2.3 2.6 94.4 95.4 95.8 0.74 0.83 0.87 1.15 40.0138 19 42 1433 78

150 3575 444/5TS 446 223 178 G 6.50 296 1.9 2.5 93.6 94.5 95.0 0.81 0.87 0.89 1.15 25.6892 20 44 1537 88

150 1780 444/5T 446 223 178 H 7.10 594 2.3 2.5 94.7 95.4 95.8 0.78 0.85 0.88 1.15 49.5409 16 35 1740 78

185 3564 444/5TS 544 272 218 F 6.00 366 1.9 2.5 94.1 95.0 95.0 0.84 0.88 0.90 1.15 30.1568 18 40 1806 88

185 1780 444/5T 550 275 220 H 7.40 732 2.4 2.6 94.8 95.4 95.8 0.78 0.86 0.88 1.15 57.1627 14 31 2029 78

300 220 3565 444/5TS 644 322 258 F 6.30 435 2.0 2.6 94.5 95.4 95.4 0.84 0.89 0.90 1.15 33.5077 16 35 2007 89

l n b n

15

20

1.5

2

3

5

250

60

75

100

125

150

200

25

30

40

50

7.5

10


13/83


09

2E 2F 2F1 H BA S R ES N-W U D.E. O.D.E

182T 13.504

184T 14.291

213T

215T 6208-ZZ 6206-Z1.37 5 6.79 5

NP T3 /4 " A 4

6206-ZZ 6205-Z

0 .3 12 1 .2 03 2 .4 80 3 .3 755.250

0.187

1 .0 63 2 .5 67 8 .7 79 1 .3 783.488 9.448 7.952 17.1658.500 5.500 7.000

0.406

NEMA

FRAMES

2.750 1.125 6.5740.2501.988 8.307 7.637

9.842

AA d1SHAFT EXTENSION

ABBEARINGS

8.661 6.299 4.500 0.984 1.7711.171

TC D GKEYWAY

J K O PMOUNTING

7.500 4.500 5.500 2.750

A B

NUMBER TAP SIZE

182T

184T

213T

215T

NEMA

FRAMES

BFBB BC AHBA AJ AK BD


4 UN C1/ 2"x16 0.250

0.250 3.125

2.750 0.125 2.625

3.500

7.250 8.500 8.875

Mechanical Data

Flange Dimensions

FOR 143/5T FRAMES

FOR 182/4T AND 213/5T FRAMES

C FLANGE

2E 2F 2F1 H BA

E143/5T 12.086

F143/5T 12.874 0.1200.344

NEMA

FRAMES

1.988 6.771 6.5356.535 6.496 3.500 1.732

C D G J K O PMOUNTING

5.500 4.000 5.000 2.250

A BS R ES N-W U D.E. O.D.E.

N PT 1/ 2 A 4 6205-ZZ 6204-ZZ2.250 0.875 5.4330.187

AA d1SHAFT EXTENSION

ABBEARINGS

0.766 1.417

KEYWAY

NUMBER TAP SIZE

E143/5T

F143/5T

NEMA

FRAMES

BFBB BC AHBA AJ AK BD


4 UN C3/ 8 x16 0.1572.250 0.120 2.1285.874 4.500 6.535

Flange Dimensions

-


14/83

Gen

eralPurposeThreePhaseMotors

ODP(IP21/IP23)


10


254T 8.250 10.100 20.669

256T 10.000 11.732 22.401

284T 23.386 0.500 1.594 3.149 4.622 1.875

284TS 22.000 0.375 1.406 2.480 3.250 1.625

286T 24.882 0.500 1.594 3.149 4.622 1.875

286TS 23.504 0.375 1.406 2.480 3.250 1.625

324T 26.181 1.844 3.937 5.250 2.125

324TS 24.685 1.594 2.756 3.750 1.875

326T 27.667 1.844 3.937 5.250 2.125

326TS 26.181 1.594 2.756 3.750 1.875

11.250

12.250

11.250

12.250

12.250

13.750

12.250

13.750

14.500

16.500

14.500

16.500

NEMA

FRAMES

6314-C3

7.087 8.500 3.375

18.150

3.000 4.750 2.375

22.125 3.544

0.875 2.880

0.625 2.021

1.811 3.937 5.590 22.44021.9 29 20.07 8

39.803

11.000

36.062

1.842 2.756 4 .250 2.12 5

1.968 3.950 5.440 19.40919.9 50 17.70 0

34.133

10.000

31.141

404/5T

16.000

0.807

6.625

404/5TS

444/5T

18.000 7.500

444/5TS

NPT3"

UNC3/4"

6314-C3

6314-C3

NU316-C3

6314-C3

2xNPT3"

NU319-C3 6316-C3

6314-C3

4.330 5.874 2.375

16.378

1.968 3.748 1.875

5.512 7.250 2.875

17.874

2.795

0.625 2.019

0.500 1.591

2.800

0.750 2.449

0.500

1.480 3.150 4.140 18.42517.1 70 15.40 0

29.764

9.000

27.638

364/5T

14.00 0 0.750 5.875

364/5TS

0.500 11.496 NPT2" 6312-Z-C33.350 15.551 15.118 2.55915.160 8.000 1.299 3.23014.566

12.500

10.500

0.657 5.25012.000

2.960 13.858 13.700 10.866

11.574

7.000 1.102 3.150

13.070

11.000

9.500

4.750 13.780

11.000

NPT1.1/2"

A4

6309-Z-C3 6209-Z-C3

6311-Z-C3 6211-Z-C3

6212-Z-C3

2.756 4.000 1.625 10.07911.812

2.165

0.375 1.406

BEARINGS

10.000

0.531

4.250 12.130 6.250 0.787 2.520 2.560 12.204

SHAFT EXTENSIONAB AA d1O P T

KEYWAYD G J K

MOUNTINGA B C

NUMBER TAP SIZE254TC

256TC

284TC 4.375

284TSC 3.000

286TC 4.375

286TSC 3.000

324TC 5.000

324TSC 3.500

326TC 5.000

326TSC 3.500

NEMA

FRAMES

4.000

444/5TC

7.500 14.500 7.500

8.250

444/5TSC 4.500

364/5TC

5.875

8

5.625

364/5TSC 3.500

404/5TC

6.625

7.000

404/5TSC

5.250

11.000 12.500 15.562

3.750

4.750 9.000 10.500 11.031

4

UNC1/2"-13

0.250 0.250

UNC5/8"-11

4.250 7.250 8.500 8.875


BA AJ AK BDBF

BB BC AH

NUMBER TAP SIZE

254TD

256TD

284TD

284TSD

286TD

286TSD

324TD

324TSD

326TD

326TSD

NEMA

FRAMES

404/5TD

6.625

20.000 18.000

404/5TSD

444/5TD

7.500

444/5TSD

364/5TD

5.875 17.716

364/5TSD

4

0 .828 0 .250

4.750

5.250

16.000 14.000

18.000

21.653 8

4.250

12.500 11.000 14.000

"D" FLANGE DIMENSIONS

BA AJ AK BDBF

BB

Notes: All dimensions are in inches.

The above values are subject to changes without prior notice.

Mechanical Data

Flange Dimensions

254/6T FRAMES AND UP

C FLANGE

D FLANGE


15/83

General Purpose Three Phase MotorsTEFC (IP55)

Standard Efficiency

TMW21 Severe Duty motors meet the most demanding severe duty applicationrequirements. With cast iron enclosures TEFC rated IP55, these motors handle bothwet and dirty environments. They are painted with WEGs own special system, usingsynthetic enamel alkyd resin paints, which exceed the ASTM B117 standard for saltspray test. This line is rated for dual frequency and dual voltage (with reduced

TMservice factor) up to 30 HP. W21 Severe Duty motors rating meets or exceeds MG1

Part 31 NEMA Specifications.

Note:According to the EPAct 92, these motors cannot be sold for application within theUnited States, however, they are available for export.

11

Frames 143T to 5010

Applications

Pumps

Fans

Crushers

Conveyors

Machine tools

Milling applications Centrifugal machines

Presses

Elevators

Looms

Grinders

Woodworking

Cooling

Packaging equipment

Other Severe Duty applications

Three-phase, II, IV, VI and VIII pole, 60Hz

Voltage: 208-230/460V, 200V, 460V or

575V

50/60Hz rated up to 30HP

For 40HP and up, please contact your

sales office

Totally Enclosed Fan Cooled - TEFC (IP55)

water tight and dust tight enclosure



(586/7 frame equipped with labyrinth

tachonite seal as standard)




on frames above 404T, 1200RPM and

900RPM



bearings motors)

NEMA dimensions


insulation materials are Class H (180 C)

except motor leads (Class F)o

Temperature rise: Class B (80 C)

NEMA ratings design B *

Special voltages


Space heaters (standard on 586/7

frames)

Labyrinth tachonite seal available for

all ratings

Thermostats or RTDs (PT100)

Additional terminal box


applications

Cable glands

C and D flanges for all ratings


available for all frames Special epoxy painting

Standard Features

Optional Features

Service Factor: 1.25 up to 100HP

1.15 from 125HP and up

Continuous duty (S1)o o




F1 mounted T-Box

F2 mounting capable

Stainless steel nameplate AISI 316 with

laser etching

Paint: Synthetic enamel alkyd resin

base (exceeds ASTM B117 salt spray

test)

Color: RAL 7022 (dark gray)

Automatic drain plugs - pressure

compensated

Regreasable bearings, positive

pressure lubrication system (frames

254T and up)

Thermistors type PTC (1 per phase)

from frames 324T and up

Continuous flow class H resin

insulation system

Gasketed conduit box

Roller bearing models available

MGI Part 31 rating for use with VFD -

4:1 constant torque speed range

Speed range can be extended with

optional Blower kit

Note: Motors are nameplated Class I Div. II Groups B, C and D and Class F components f rom frames 364T and up

* Design B torque rating on nameplate can be re-plated for Design C

All motors are tested according to IEEE 112 std. - method B or C390 CSAAll WEG motors are energy efficiency verified by UL in addition to the DOE.

R

APPROVED

LR 38324

APPROVED BY


16/83

Electrical Data


TEFC(IP55)

Standa

rdEfficiency


Standard Efficiency

12


Code)(Il/In) 50 75 100 50 75 100 Hot Cold

NEMA

Frame

Full Load Current

In(A)Rated Output Full Load

Speed

(RPM)

Sound

dB(A)% of full load

Service

Factor

SF

Moment of

Inertia

WK2(lb.ft

2)

Allowable locked


Weight

(lb)

Locked Rotor

CurrentFull Load

Torque

Tn(lb.ft)

Locked

Rotor

Torque

(Tl/Tn)

Break

Down

Torque

(Tb/Tn)


1725 143T 3.02 1.51 1.21 J 6.00 3.06 2.8 3.0 71.0 76.0 78.0 0.60 0.73 0.80 1.15 0.09302 6 13 37 51

1130 145T 3.61 1.81 1.44 J 5.30 4.68 2.4 2.7 70.0 73.5 74.5 0.48 0.61 0.70 1.15 0.11960 14 31 44 49

870 182T 4.48 2.24 1.79 L 5.40 6.08 2.2 2.7 63.2 69.4 72.5 0.38 0 .50 0.58 1.15 0.39914 13 29 77 50860 W182/4 4.50 2.25 1.80 H 3.70 6.15 1.6 2.2 68.0 70.0 72.0 0.42 0 .50 0.58 1.15 0.19952 23 51 44 54

3440 143T 4.07 2.04 1.63 J 7.00 2.25 2.5 3.0 72.5 76.5 78.0 0 .75 0.83 0.87 1.15 0.03726 7 15 37 68

1710 145T 4.37 2.19 1.75 J 6.60 4.53 2.6 2.8 74.0 77.5 79.0 0.60 0.73 0.80 1.15 0.09302 6 13 37 511160 W182/4 5.38 2.69 2.15 K 5.60 6.68 2.4 2.8 68.0 72.0 75.5 0.50 0.61 0.68 1.15 0.19952 14 31 44 48

1155 182T 5.28 2.64 2.11 K 6.00 6.71 2.2 2.6 70.7 75.5 78.0 0.46 0.58 0.67 1.15 0.37707 9 20 60 52860 W182/4 6.58 3.29 2.63 H 4.00 9.01 1.8 2.3 66.0 68.0 70.0 0.51 0.55 0.60 1.15 0.30595 14 31 66 54

860 184T 5.62 2.81 2.25 J 5.20 9.01 2.3 2.6 70.0 73.0 74.5 0.46 0.58 0.66 1.15 0.39914 18 40 79 50

3410 145T 5.45 2.73 2.18 H 6.50 3.10 2.2 2.6 75.5 78.5 78.5 0.76 0.84 0.88 1.15 0.03726 11 24 41 68

1740 145T 5.85 2.93 2.34 J 6.40 6.08 2.5 3.0 77.0 81.0 82.5 0.60 0.72 0.78 1.15 0.13289 7 15 49 511160 W182/4 7.06 3.53 2.82 J 5.50 9.11 2.2 2.8 70.0 75.5 78.5 0.51 0.61 0.68 1.15 0.26604 7 15 60 48

1160 184T 7.05 3.53 2.82 K 6.20 9.11 2.4 2.7 71.0 76.5 78.5 0.47 0.59 0.68 1.15 0.44351 12 26 79 52

865 213T 6.80 3.40 2.72 K 6.50 12.2 2.5 2.7 70.0 75.0 78.0 0.51 0.63 0.71 1.15 1.19077 11 24 132 52850 W213/5 7.20 3.60 2.88 K 6.00 12.4 2.6 3.0 72.0 75.5 77.0 0.50 0.60 0.68 1.15 0.44363 10 22 112 50

3500 182T 8.07 4.04 3.23 K 8.10 4.43 2.8 3.6 74.5 78.5 81.5 0.71 0.80 0.84 1.15 0.14523 6 13 79 693470 W182/4 8.00 4.00 3.20 J 7.00 4.47 2.6 3.0 74.0 75.5 78.5 0.74 0.82 0.88 1.15 0.07980 9 20 42 71

3465 145T2) 8.07 4.04 3.23 K 7.80 4.47 3.0 3.0 78.5 80.0 81.5 0.66 0 .77 0.84 1.15 0.04865 5 11 46 68

1750 182T 8.26 4.13 3.30 K 7.80 8.86 2.2 3.0 75.5 78.5 81.5 0.60 0.72 0.82 1.15 0.28595 7 15 64 581720 W182/4 8.42 4.21 3.37 J 6.50 9.01 2.7 2.8 77.0 78.5 80.0 0 .63 0.74 0.82 1.15 0.14537 9 20 55 54

1170 213T 9.93 4.97 3.97 J 5.80 13.3 2.2 2.8 77.6 81.5 81.8 0.47 0.60 0.68 1.15 0.73587 16 35 106 55

1145 W213/5 9.02 4.51 3.61 J 6.00 13.5 1.9 2.1 74.0 75.5 78.5 0.61 0.72 0.78 1.15 0.44363 6 13 110 52865 W213/5 10.4 5.21 4.17 K 6.00 17.9 3.0 3.5 75.5 80.0 81.5 0.44 0.56 0.65 1.15 0.66546 12 26 143 50

860 215T 9.33 4.67 3.73 J 6.00 18.0 2.1 2.6 77.0 79.5 80.0 0.53 0.66 0.74 1.15 1.42902 18 40 143 523490 W182/4 12.9 6.47 5.18 K 8.20 7.47 3.0 3.5 75.5 80.0 82.5 0.73 0.82 0.87 1.15 0.13303 5 11 68 71

3470 184T 12.3 6.15 4.92 J 7.30 7.51 2.2 2.7 82.0 84.0 84.5 0.80 0.87 0.89 1.15 0.17252 9 20 88 69

1735 184T 13.0 6.50 5.20 J 7.40 15.0 2.4 3.0 82.0 84.0 85.0 0.68 0.80 0.84 1.15 0.38134 10 22 97 581720 W182/4 13.7 6.86 5.49 K 7.80 15.2 3.0 3.5 78.5 80.0 82.5 0.70 0.81 0.82 1.15 0.23621 5 11 73 54

1160 215T 14.7 7.35 5.88 J 6.80 22.5 2.0 2.4 82.5 84.0 84.0 0 .55 0.66 0.75 1.15 1.01185 10 22 137 551140 W213/5 14.0 7.00 5.60 J 6.50 22.9 2.0 2.2 81.5 82.5 84.0 0.65 0.74 0.79 1.15 0.62109 7 15 137 52

880 254T 15.7 7.85 6.28 H 5.30 29.6 2.0 2.6 80.0 83.7 84.5 0 .50 0.61 0.70 1.15 2.89720 29 64 243 54865 W254/6 15.1 7.57 6.06 K 7.00 30.1 2.0 2.8 78.5 82.5 84.0 0.54 0.66 0.73 1.15 2.02450 14 31 227 52

3500 W213/5 18.1 9.07 7.26 J 7.50 11.1 2.5 3.5 84.0 85.5 87.5 0.72 0.81 0.87 1.15 0.19988 6 13 121 69

3500 213T 17.9 8.95 7.16 G 6.50 11.1 2.0 2.9 83.0 85.5 86.5 0.79 0.86 0.89 1.15 0.39914 18 40 132 72

1760 213T 19.4 9.70 7.76 J 7.70 22.0 2.1 3.0 83.0 86.0 87.0 0.61 0.73 0.82 1.15 0.82794 6 13 139 611730 W213/5 18.6 9.28 7.42 J 7.50 22.4 2.5 3.0 84.0 85.5 86.5 0.70 0.80 0.86 1.15 0.44494 8 18 139 58

1165 254T 19.2 9.60 7.68 G 6.00 33.3 2.0 2.5 84.5 86.0 86.5 0.66 0.77 0.83 1.15 2.38581 14 31 212 591160 W254/6 21.0 10.5 8.40 J 7.00 33.4 2.4 2.5 80.0 82.5 84.0 0.60 0.71 0.78 1.15 1.19590 10 22 196 55

875 256T 22.6 11.3 9.04 G 5.20 44.3 2.2 2.6 82.5 85.0 86.0 0.50 0.63 0.71 1.15 3.40858 28 62 287 54

860 W254/61)

24.0 12.0 9.60 L 7.20 45.1 2.5 2.5 77.0 80.0 82.0 0.50 0.62 0.70 1.15 2.73892 7 15 280 52

3510 215T 24.4 12.2 9.76 H 7.00 15.1 2.2 2.8 84.0 86.5 87.6 0.77 0.85 0.88 1.15 0.53226 12 26 143 723475 W213/5 23.6 11.8 9.44 J 7.70 15.2 2.4 2.8 86.5 87.5 88.5 0.81 0.88 0.90 1.15 0.23621 8 18 135 69

1760 215T 25.5 12.8 10.2 K 8.00 30.0 2.2 3.0 86.0 88.0 89.0 0.66 0.77 0.83 1.15 1.10392 5 11 137 611165 W254/6 29.0 14.5 11.6 K 7.70 45.4 2.5 3.0 82.5 85.5 86.5 0.55 0.65 0.75 1.15 1.56388 7 15 232 55

1165 256T 25.6 12.8 10.2 G 6.00 45.4 2.0 2.5 86.2 87.1 87.4 0.68 0.78 0.84 1.15 2.89720 14 31 243 59

880 284T 26.3 13.2 10.5 K 8.50 60.1 2.5 2.8 86.0 87.0 87.4 0.65 0.76 0.82 1.15 5.89002 15 33 344 54

3540 254T 36.3 18.2 14.5 J 7.50 21.9 2.3 3.0 83.0 86.5 87.5 0 .75 0.83 0.87 1.15 0.90744 10 22 234 753500 W254/6 33.6 16.8 13.4 J 8.50 22.1 2.5 3.5 87.5 88.5 89.5 0.85 0.90 0.92 1.15 0.66546 7 15 214 72

1755 W254/6 36.2 18.1 14.5 J 8.20 44.2 2.4 3.0 86.5 87.5 89.5 0.65 0.78 0.85 1.15 1.37990 5 11 212 61

1755 254T 37.6 18.8 15.0 G 6.00 44.2 2.0 2.3 85.0 86.9 88.5 0.69 0.79 0.83 1.15 1.54815 13 29 207 66

1170 284T 35.5 17.8 14.2 K 9.00 66.3 2.4 2.8 87.5 88.0 88.3 0.77 0.85 0.88 1.15 6.21726 7 15 331 59

875 286T 37.6 18.8 15.0 J 7.90 88.6 2.4 2.7 86.5 87.5 88.5 0.70 0.77 0.83 1.15 6.21726 7 15 368 54

3540 256T 48.1 24.1 19.2 J 7.80 29.9 2.3 3.0 86.4 88.6 89.0 0.75 0.84 0.88 1.15 1.11673 9 20 243 753505 W254/6 45.8 22.9 18.3 J 8.50 30.2 2.5 3.0 87.5 88.5 89.5 0.88 0.91 0.92 1.15 0.79854 6 13 238 72

1760 256T 50.3 25.2 20.1 H 6.30 60.1 2.3 2.2 88.0 89.3 90.2 0 .69 0.79 0.83 1.15 2.26266 10 22 251 661755 W254/6 49.0 24.5 19.6 K 8.50 60.2 2.5 3.0 85.5 88.5 89.5 0 .68 0.81 0.86 1.15 1.74772 4 9 245 61

1170 286T 47.8 23.9 19.1 K 8.50 90.4 2.5 3.0 88.5 89.2 89.5 0.76 0.84 0.88 1.15 6.21726 7 15 353 59

885 324T 59.1 29.6 23.6 G 5.00 119 2.1 2.2 85.4 87.5 88.5 0.53 0 .64 0.72 1.15 8.51337 29 64 474 56

3540 284TS 59.3 29.7 23.7 H 7.00 36.8 2.2 2.8 87.0 88.5 89.0 0.82 0.86 0.88 1.15 1.88559 6 13 306 75

1765 284T 60.4 30.2 24.2 H 7.00 73.9 2.5 2.6 88.5 90.0 90.5 0.71 0.81 0.85 1.15 3.83121 10 22 331 68

1175 324T 61.3 30.7 24.5 G 6.10 111 2.0 2.3 88.5 90.0 90.2 0.72 0.80 0.84 1.15 8.93909 27 59 490 62

880 326T 70.5 35.3 28.2 F 4.80 148 2.0 2.0 86.5 88.2 89.0 0.56 0 .68 0.74 1.15 9.79052 22 48 496 56

3540 286TS 70.1 35.1 28.0 H 7.50 43.8 2.6 3.2 87.0 88.5 89.5 0.79 0 .85 0.88 1.15 2.28947 8 18 359 75

1765 286T 72.2 36.1 28.9 J 7.50 87.8 2.8 2.8 89.3 90.0 91.0 0 .70 0.80 0.84 1.15 3.83121 9 20 353 68

1175 326T 71.4 35.7 28.6 G 6.00 132 2.1 2.3 89.5 90.7 91.0 0.75 0.81 0.85 1.15 9.79052 22 48 501 62

880 364/5T 73.8 36.9 29.5 J 8.00 176 2.2 2.8 88.5 89.5 90.2 0 .68 0.78 0.83 1.15 20.1045 16 35 752 60

3555 324TS 94.7 47.4 37.9 H 7.20 59.5 2.9 2.9 88.5 90.0 90.4 0.80 0.86 0.88 1.15 4.04407 11 24 470 79

1770 324T 96.6 48.3 38.6 H 6.60 119 2.3 2.5 89.5 90.5 91.7 0 .72 0.82 0.85 1.15 6.54450 14 31 461 71

1180 364/5T 94.4 47.2 37.8 H 7.20 179 2.5 2.8 89.5 90.8 91.7 0.75 0.83 0.87 1.15 23.4552 22 48 816 65

880 364/5T 98.2 49.1 39.3 J 7.70 240 2.1 2.7 88.8 89.6 90.2 0.72 0.81 0.85 1.15 23.4552 15 33 805 60

3560 326TS 114 57.0 45.6 H 7.50 73.2 3.0 2.9 90.0 91.5 92.2 0.81 0.86 0.88 1.15 4.89550 17 37 529 79

1770 326T 117 58.5 46.8 G 6.60 147 2.3 2.3 90.2 91.5 92.4 0.75 0 .83 0.86 1.15 7.85344 12 26 512 71

1180 364/5T 120 60.0 48.0 K 8.40 221 3.2 3.3 90.0 91.3 92.0 0.71 0.80 0.84 1.15 25.6892 19 42 860 65

880 404/5T 123 61.5 49.2 K 8.60 296 2.4 3.0 89.5 90.3 91.0 0 .65 0.76 0.83 1.15 29.0401 11 24 961 60

3560 364/5TS 136 68.0 54.4 J 8.00 89.1 2.6 3.0 88.6 91.0 92.5 0.82 0.87 0.90 1.15 8.08790 21 46 838 83

1775 364/5T 140 70.0 56.0 H 7.20 179 2.3 2.7 91.0 92.2 93.0 0.75 0 .84 0.87 1.15 16.6079 20 44 838 75

1180 404/5T 142 71.0 56.8 J 7.80 269 2.9 2.8 90.5 91.7 92.5 0.74 0 .83 0.86 1.15 29.0401 17 37 966 65

880 404/5T 151 75.5 60.4 K 8.00 360 2.3 2.9 89.5 90.3 91.0 0.67 0 .77 0.82 1.15 32.3907 12 26 1014 60

3560 364/5TS 165 82.5 66.0 H 8.00 109 2.5 2.7 90.0 92.0 92.8 0.85 0.89 0.90 1.15 10.6420 16 35 948 83

1775 364/5T 169 84.5 67.6 H 7.40 218 2.2 2.7 90.3 92.0 93.0 0.76 0 .84 0.88 1.15 19.0991 15 33 915 75

1185 404/5T 175 87.5 70.0 H 7.60 327 3.0 3.0 90.5 92.0 93.0 0.71 0.80 0.85 1.15 36.8584 18 40 1125 65

890 444/5T 185 92.5 74.0 J 7.60 436 2.2 2.3 90.5 91.5 92.0 0.66 0 .76 0.81 1.15 62.7179 23 51 1455 63

15 11

10 7.5

5.57.5

3 2.2

5 3.7

25 18.5

30 22

40 30

50 37

60 45

75 55

20 15

1 0.75

1.5 1.1

2 1.5


17/83

Mechanical Data

Electrical Data (cont.)



NEMA

Frame

Full Load Current

In(A)Rated Output Full Load

Speed

(RPM)

Sound

dB(A)% of full load

Service

Factor

SF

Moment of

Inertia

WK2(lb.ft

2)

Allowable locked


Weight

(lb)

Locked Rotor

CurrentFull Load

Torque

Tn(lb.ft)

Locked

Rotor

Torque

(Tl/Tn)

Break

Down

Torque

(Tb/Tn)


1)Notes: T 105K.

2) Reduced frame.

The values shown are subject to change without prior notice.


Standard Efficiency

Mechanical Data Available on page 20.

13

3560 404/5TS 221 111 88.4 J 8.20 148 3.0 3.3 91.0 92.5 93.5 0.85 0.90 0.91 1.15 11.9189 13 29 1025 84

1780 404/5T 231 116 92.4 K 8.80 297 3.2 3.2 92.0 93.0 93.5 0.74 0.83 0.87 1.15 27.4029 12 26 1147 75

1185 444/5T 244 122 97.6 H 6.50 446 2.4 2.5 90.2 92.2 93.0 0.67 0.78 0.83 1.15 62.7179 28 62 1435 70890 444/5T

1) 266 133 106 K 8.30 594 2.5 2.5 90.5 91.5 92.0 0.60 0.70 0.77 1.15 81.8061 13 29 1720 63

3575 444/5TS 274 137 110 H 8.00 177 2.5 3.0 90.0 92.0 93.7 0.80 0.86 0.88 1.15 30.1568 30 66 1621 84

1780 444/5T 280 140 112 H 7.30 356 2.2 2.5 91.5 92.9 93.8 0.75 0.83 0.86 1.15 45.7301 25 55 1566 80

1185 444/5T 288 144 115 F 6.00 535 2.3 2.4 92.5 93.2 93.5 0.70 0.80 0.84 1.15 73.6254 20 44 1555 70

890 447T1) 309 155 124 K 8.30 713 2.4 2.4 91.0 91.8 92.5 0.65 0.75 0.79 1.15 103.6208 14 31 1934 66

890 504/5T1) 309 155 124 K 8.30 713 2.4 2.4 91.0 91.8 92.5 0.65 0.75 0.79 1.15 103.6208 14 31 1934 66

3570 444/5TS 329 165 132 H 7.80 217 2.5 2.7 89.0 92.0 93.3 0.82 0.86 0.90 1.15 30.1568 34 75 1621 84

1785 444/5T 337 169 135 J 8.00 434 2.6 2.7 91.5 93.5 94.1 0.78 0.84 0.87 1.15 60.9735 20 44 1764 80

1185 447T 354 177 142 H 7.00 654 2.5 2.5 91.5 93.0 94.1 0.68 0.78 0.83 1.15 109.0747 31 68 2095 73

1185 504/5T 354 177 142 H 7.00 654 2.5 2.5 91.5 93.0 94.1 0.68 0.78 0.83 1.15 109.0747 31 68 2095 73

890 447T1) 378 189 151 K 8.40 871 2.6 2.6 91.0 91.8 92.5 0.65 0.75 0.79 1.15 125.4358 13 29 2139 66

890 504/5T1) 378 189 151 K 8.40 871 2.6 2.6 91.0 91.8 92.5 0.65 0.75 0.79 1.15 125.4358 13 29 2139 66

3575 447TS1) 444 222 178 H 7.80 296 2.7 2.8 91.5 93.2 94.2 0.84 0.88 0.90 1.00 39.0923 17 37 1947 87

3575 504/5TS1) 444 222 178 H 7.80 296 2.7 2.8 91.5 93.2 94.2 0.84 0.88 0.90 1.00 39.0923 17 37 1947 87

1785 444/5T2) 463 232 185 H 7.50 592 2.4 2.6 90.5 93.0 94.5 0.75 0.83 0.86 1.15 76.2170 19 42 1985 80

1785 447T 463 232 185 H 7.50 592 2.4 2.6 90.5 93.0 94.5 0.75 0.83 0.86 1.15 76.2170 19 42 2095 80

1785 504/5T 463 232 185 H 7.50 592 2.4 2.6 90.5 93.0 94.5 0.75 0.83 0.86 1.15 76.2170 19 42 2095 80

1185 447T 493 247 197 J 7.60 892 2.8 2.8 92.5 93.8 94.2 0.66 0.76 0.81 1.15 125.4358 21 46 2187 73

1185 504/5T 493 247 197 J 7.60 892 2.8 2.8 92.5 93.8 94.2 0.66 0.76 0.81 1.15 125.4358 21 46 2187 73890 449T

1) 2) 530 265 212 J 7.00 1188 2.0 2.1 92.5 93.5 93.5 0.60 0.70 0.76 1.15 160.8851 13 29 3409 63

890 5008T 497 249 199 J 7.20 1188 1.9 2.7 94.3 94.9 94.7 0.65 0.75 0.80 1.00 199.0641 24 53 3078 66

890 586/7T 511 256 204 J 7.00 1188 1.5 2.1 92.0 93.8 94.5 0.63 0.73 0.78 1.15 350.2192 42 92 3528 75

3575 447TS1) 547 274 219 J 8.50 365 2.8 3.0 92.0 93.7 94.3 0.82 0.88 0.90 1.00 50.2616 18 40 2220 87

3575 504/5TS1) 547 274 219 J 8.50 365 2.8 3.0 92.0 93.7 94.3 0.82 0.88 0.90 1.00 50.2616 18 40 2220 87

1785 447T 571 286 228 J 8.30 730 2.8 2.8 91.0 93.0 94.5 0.76 0.84 0.86 1.15 89.5549 22 48 2227 80

1785 504/5T 571 286 228 J 8.30 730 2.8 2.8 91.0 93.0 94.5 0.76 0.84 0.86 1.15 89.5549 22 48 2227 80

1190 449T2) 614 307 246 H 7.00 1096 2.5 2.5 93.1 94.0 94.5 0.65 0.76 0.80 1.15 152.7047 25 55 2977 70

1190 586/7T 610 305 244 G 6.20 1096 1.9 2.1 92.7 93.7 94.0 0.69 0.78 0.81 1.15 226.1773 74 163 3263 77

890 5008T 605 303 242 H 6.70 1465 1.8 2.5 94.8 95.1 94.8 0.68 0.77 0.81 1.00 225.6059 25 55 3400 66

890 586/7T 626 313 250 H 7.00 1465 1.4 2.1 91.5 92.9 93.9 0.62 0.74 0.79 1.15 387.4767 34 75 3726 75

3580 586/7TS 633 317 253 G 7.20 433 1.7 2.5 91.0 92.7 93.8 0.88 0.91 0.93 1.15 103.6208 70 154 3341 96

3575 449TS1) 2) 635 318 254 H 8.00 434 2.2 2.9 92.8 94.1 94.5 0.88 0.91 0.92 1.15 58.0801 25 55 2646 84

1790 586/7T 661 331 264 G 7.00 866 2.2 2.3 93.0 94.5 95.0 0.79 0.85 0.88 1.15 150.4038 48 106 2975 83

1785 449T1) 2) 707 354 283 J 8.00 869 3.3 2.8 92.4 94.1 94.1 0.70 0.79 0.83 1.15 104.7983 16 35 2807 80

1190 586/7T 721 361 288 H 6.90 1303 1.9 2.2 93.0 94.2 94.5 0.65 0.75 0.81 1.15 260.1041 64 141 3506 77

1185 449T1) 2) 720 360 288 H 7.00 1308 2.5 2.7 94.0 94.5 94.7 0.67 0.77 0.81 1.00 169.0658 15 33 3197 70

890 5008T 748 374 299 J 7.70 1742 2.2 2.7 93.8 94.7 94.7 0.60 0.71 0.78 1.00 265.4189 19 42 3868 66

890 586/7T 734 367 294 H 7.00 1742 1.5 2.1 92.4 93.8 94.0 0.66 0.75 0.80 1.15 461.9913 36 79 3896 75

3580 586/7TS1) 747 374 299 H 7.60 512 1.7 2.4 91.8 93.8 94.0 0.89 0.92 0.93 1.00 122.7090 60 132 3638 96

3575 449TS1) 2) 747 374 299 G 7.40 513 2.1 1.9 93.0 94.1 95.0 0.88 0.91 0.92 1.00 68.1324 23 51 3169 84

1790 586/7T 781 391 312 H 7.30 1024 2.3 2.4 92.9 94.6 95.0 0.77 0.85 0.88 1.15 176.9458 32 70 3363 83

1785 449T1) 2) 808 404 323 H 7.00 1027 2.6 2.6 93.5 94.5 95.0 0.74 0.82 0.85 1.00 118.1362 19 42 3175 80

1190 586/7T 839 420 336 G 6.50 1540 2.0 2.1 93.0 94.7 94.9 0.71 0.79 0.82 1.15 327.9572 73 161 3958 77

890 586/7T1) 861 431 344 H 7.20 2059 1.5 2.1 91.2 93.0 94.7 0.63 0.73 0.80 1.00 484.3459 30 66 4289 75

1790 586/7T 901 451 360 G 6.60 1181 2.1 2.1 93.3 94.7 95.0 0.81 0.86 0.88 1.15 221.1823 37 81 3771 83

1190 586/7T1) 968 484 387 G 6.50 1777 2.0 2.1 93.7 94.5 94.9 0.69 0.78 0.82 1.15 350.5749 63 139 4101 77

1790 586/7T1) 991 496 396 G 7.10 1299 2.1 2.1 93.8 94.8 95.0 0.77 0.85 0.88 1.15 243.3006 39 86 3991 83

1190 586/7T1) 1080 540 432 G 6.20 1954 1.8 1.9 93.9 94.7 95.0 0.68 0.76 0.81 1.00 367.5383 53 117 4223 77

500 370 1790 586/7T1) 1110 555 444 G 6.60 1457 2.1 2.2 93.9 95.0 95.2 0.79 0.85 0.88 1.00 265.4189 31 68 4190 83

75100

125 90

330450

300 220

350 260

150 110

400 300

200 150

250 185


18/83


TEFC(IP55)

HighEfficiency


High Efficiency

TMWEG W21 Severe Duty motors meet the most demanding severe duty applicationrequirements. These TEFC motors are all cast iron construction, with enclosuresrated IP55 to handle wet and dirty environments. They are painted with WEGs ownspecial system, using synthetic enamel alkyd resin paints, which exceed the ASTM

TMB117 standard for salt spray test. The W21 line is rated for 1.25 Service Factor up to100HP and meet Design B (up to 200HP) and Design C (according to electrical table)

torque requirements. This line is rated for dual frequency and dual voltage (withreduced service factor) up to 30 HP. And the entire line is certified Inverter Ratedforuse with a VFD. This rating meets or exceeds MG1 Part 31 NEMA Specifications.

WEGs High Efficiency motors are designed to meet or exceed all EPActrequirements for energy efficiency as defined by the DOE. The efficiency values arecertified according to the DOEs regulations (Certificate of Compliance numberCC029A).

Frames 143T to 5010

Applications

Pumps

Fans

Crushers Conveyors

Machine tools

Milling applications

Centrifugal machines

Presses

Elevators

Looms

Grinders

Woodworking

Cooling

Packaging equipment

Other Severe Duty applications

Efficiency Certification number CC029A

according to US Department of Energy

Regulations Three-phase, II, IV, VI and VIII pole, 60Hz

Voltage: 208-230/460V, 200V, 460V or

575V

50/60Hz rated up to 30HP

For 40HP and up, please contact your

sales office

Totally Enclosed Fan Cooled - TEFC (IP55)

water tight and dust tight enclosure



(586/7 frame equipped with labyrinth

tachonite seal as standard)




on frames above 404T, 1200RPM and

900RPM



bearings motors)

NEMA dimensions


insulation materials are Class H (180 C)

except motor leads (Class F)o

Temperature rise: Class B (80 C) NEMA ratings design B *

Special voltages


Space heaters (standard on 586/7

frames)

Labyrinth tachonite seal available for

all ratings

Thermostats or RTDs (PT100)

Additional terminal box


applications

Cable glands C and D flanges for all ratings


available for all frames

Special epoxy painting

Standard Features

Optional Features

Service Factor: 1.25 up to 100HP

1.15 from 125HP and up

Continuous duty (S1)o o




F1 mounted T-Box

F2 mounting capable

Stainless steel nameplate AISI 316 with

laser etching

Paint: Synthetic enamel alkyd resin

base (exceeds ASTM B117 salt spray

test)

Color: RAL 5007 (Blue)

Automatic drain plugs - pressure

compensated

Regreasable bearings, positive

pressure lubrication system (frames

254T and up)

Thermistors type PTC (1 per phase)

from frames 324T and up

Continuous flow class H resin

insulation system

Gasketed conduit box

Roller bearing models available

MGI Part 31 rating for use with VFD -

4:1 constant torque speed range

Speed range can be extended withoptional Blower kit

Note: Motors are nameplated Class I Div. I I Groups B, C and D and Class F components from frames 364T and up

* Design B torque rating on nameplate can be re-plated for Design C

All motors are tested according to IEEE 112 std. - method B or C390 CSAAll WEG motors are energy efficiency verified by UL in addition to the DOE.

14

Severeduty

R

APPROVED BY

LR 38324

APPROVED BY


19/83



Allowable

locked Rotor

Time (s)

Approx.

Weight

(lb)

Soun

dB(A% of full load


Factor

SF

Moment of

Inertia

WK2(lb.ft

2)


Speed

(RPM)

NEMA

Frame

Full Load Current

In(A)

Locked Rotor

CurrentFull Load

Torque Tn

(lb.ft)

Locked

Rotor

Torque

(Tl/Tn)

Break

Down

Torque

(Tb/Tn)


High Efficiency

15

Electrical Data

3495 143T 2.85 1.43 1.14 M 9.00 1.51 3.0 4.0 72.0 77.0 78.5 0.69 0.79 0.84 1.25 0.03726 23 51 40 68

1765 143T

3) 2.98 1.49 1.19 M 8.60 2.99 2.9 4.0 77.0 80.0 82.5 0.55 0.69 0.77 1.25 0.09302 16 35 44 51

1155 145T 3.40 1.70 1.36 L 6.80 4.58 2.3 3.0 75.5 80.0 80.0 0.48 0.60 0.69 1.25 0.13289 22 48 44 49

875 182T3) 4.63 2.31 1.85 M 6.00 6.04 3.0 3.5 68.0 72.0 74.0 0.35 0.45 0.55 1.25 0.39914 40 88 95 50

3500 143T 3.98 1.99 1.59 L 9.20 2.21 3.0 4.0 75.5 81.5 82.5 0.69 0.78 0.84 1.25 0.04295 19 42 42 68

1760 145T 4.10 2.05 1.64 L 8.50 4.40 2.7 3.7 80.0 84.0 84.0 0.60 0.72 0.80 1.25 0.11960 13 29 51 51

1165 182T3) 4.75 2.38 1.90 M 8.00 6.65 3.2 4.0 81.5 84.0 85.5 0.47 0.58 0.68 1.25 0.48798 36 79 68 52

860 184T3) 5.43 2.71 2.17 J 5.50 9.01 2.5 2.6 74.0 75.5 77.0 0.47 0.58 0.66 1.25 0.44363 32 70 110 50

3480 145T 5.20 2.60 2.08 L 9.40 3.04 2.8 4.0 80.0 82.5 84.0 0.70 0.81 0.86 1.25 0.04886 12 26 44 68

1750 145T 5.40 2.70 2.16 K 7.70 6.04 2.4 3.0 81.5 84.0 84.0 0.63 0.74 0.83 1.25 0.13289 11 24 53 51

1165 184T3) 6.40 3.20 2.56 L 7.50 9.07 3.0 3.0 84.0 86.5 86.5 0.48 0.60 0.68 1.25 0.62109 35 77 79 52

870 213T3) 6.93 3.46 2.77 L 6.60 12.2 2.4 2.9 78.5 81.5 82.5 0.47 0.53 0.66 1.25 1.19089 43 95 141 52

3500 182T 7.43 3.71 2.97 K 8.20 4.43 2.5 4.0 80.0 84.0 85.5 0.74 0.83 0.87 1.25 0.17252 23 51 97 69

1765 182T 7.80 3.90 3.12 K 7.90 8.78 2.3 3.2 85.5 87.5 87.5 0.65 0.75 0.81 1.25 0.31782 31 68 88 58

1170 213T 8.53 4.26 3.41 J 7.00 13.3 2.2 2.5 86.5 87.5 87.5 0.53 0.65 0.74 1.25 1.01185 59 130 110 55

865 215T 8.65 4.33 3.46 K 7.10 17.9 2.0 2.1 82.5 84.0 84.0 0.59 0.70 0.76 1.25 2.02441 30 66 159 52

3480 184T 11.8 5.90 4.72 J 7.70 7.49 2.3 3.3 84.0 86.5 87.5 0.80 0.86 0.90 1.25 0.19988 23 51 105 69

1750 184T 13.0 6.48 5.18 H 6.80 14.9 2.1 3.0 85.5 87.5 87.5 0.66 0.77 0.82 1.25 0.38134 21 46 93 58

1160 215T 13.6 6.80 5.44 H 6.10 22.5 1.8 2.1 86.5 87.5 87.5 0.65 0.75 0.78 1.25 1.47174 49 108 162 55

875 254T 16.0 7.99 6.39 H 5.30 29.8 2.0 2.8 82.1 85.0 85.5 0.47 0.60 0.68 1.25 2.89720 37 81 232 54

3515 213T 17.3 8.66 6.93 H 7.10 11.0 2.2 3.5 85.5 87.5 88.5 0.80 0.87 0.90 1.25 0.48789 26 57 137 72

3460 184T2) 17.5 8.76 7.01 H 7.00 11.2 2.2 2.3 85.5 87.5 88.5 0.81 0.87 0.89 1.15 0.23611 15 33 119 69

1765 213T 19.1 9.53 7.62 H 6.40 22.0 2.0 2.6 87.5 89.5 89.5 0.64 0.75 0.81 1.25 1.01185 21 46 137 61

1170 254T 19.1 9.53 7.62 H 6.80 33.1 2.3 3.1 88.5 89.5 89.5 0.62 0.74 0.81 1.25 2.55643 29 64 236 59

875 256T3) 22.5 11.2 8.99 G 5.20 44.3 1.9 2.7 83.4 85.9 86.5 0.51 0.63 0.71 1.25 3.40858 41 90 276 54

3500 215T 23.4 11.7 9.35 H 6.90 15.1 2.2 2.8 88.5 89.5 89.5 0.81 0.88 0.90 1.25 0.57664 20 44 137 72

1760 215T 25.5 12.8 10.2 H 6.50 30.0 2.0 2.6 88.5 90.2 90.2 0.67 0.78 0.82 1.25 1.37990 17 37 152 61

1175 256T3) 26.8 13.4 10.7 J 6.90 45.0 2.3 2.9 88.5 89.5 89.5 0.58 0.72 0.79 1.25 2.89729 22 48 278 59

885 284T3) 27.3 13.6 10.9 H 6.00 59.7 2.5 2.4 86.5 88.5 88.5 0.60 0.72 0.78 1.25 7.19897 53 117 373 54

3520 254T 34.0 17.0 13.6 G 6.30 22.0 2.0 2.7 89.5 90.2 90.2 0.85 0.89 0.90 1.25 1.25653 28 62 254 75

3500 215T2) 34.5 17.3 13.8 F 6.10 22.1 2.0 2.2 89.0 90.2 90.2 0.80 0.87 0.89 1.15 0.66539 10 22 161 72

1760 254T3) 35.8 17.9 14.3 G 6.40 44.0 2.5 2.5 89.5 91.0 91.0 0.70 0.80 0.85 1.25 2.38178 27 59 240 66

1180 284T3) 34.5 17.3 13.8 G 6.70 65.7 2.3 2.5 89.5 90.2 91.0 0.79 0.85 0.88 1.25 7.19918 21 46 306 59

880 286T3) 38.0 19.0 15.2 G 6.10 88.1 2.4 2.3 86.5 88.5 88.5 0.68 0.78 0.82 1.25 8.18089 37 81 423 54

3520 256T 46.5 23.3 18.6 G 6.20 30.0 2.0 2.5 89.5 90.2 90.2 0.86 0.90 0.90 1.25 1.53576 21 46 287 75

1755 256T3) 48.8 24.4 19.5 G 5.90 60.2 2.4 2.4 89.5 91.0 91.0 0.72 0.81 0.85 1.25 2.85804 18 40 287 66

1175 286T3) 47.0 23.5 18.8 G 6.30 90.0 2.3 2.5 90.2 91.0 91.0 0.80 0.86 0.88 1.25 8.18089 31 68 430 59

880 324T3) 56.0 28.0 22.4 G 5.30 120 2.2 2.2 87.5 89.5 89.5 0.56 0.68 0.75 1.25 9.79052 47 103 512 56

3525 284TS 58.0 29.0 23.2 G 6.20 37.0 2.0 2.5 90.2 91.0 91.0 0.84 0.87 0.88 1.25 2.28947 23 51 313 75

1760 284T 3) 59.3 29.6 23.7 G 6.10 74.1 2.2 2.5 91.7 92.4 92.4 0.72 0.82 0.85 1.25 5.10836 51 112 397 68

1175 324T3) 59.5 29.8 23.8 F 5.90 111 2.2 2.4 89.5 91.7 91.7 0.72 0.81 0.85 1.25 10.2163 56 123 527 62

880 326T3) 71.0 35.5 28.4 G 5.10 148 2.4 2.4 87.5 88.5 89.5 0.53 0.65 0.73 1.25 11.9189 52 114 587 56

3520 286TS 67.5 33.8 27.0 G 6.40 44.0 1.9 2.3 90.2 91.0 91.0 0.84 0.88 0.90 1.25 2.82838 19 42 364 75

1755 286T3) 68.8 34.4 27.5 G 6.30 88.3 2.4 2.6 92.4 93.0 92.4 0.75 0.83 0.87 1.25 5.32122 22 48 441 68

1175 326T3) 70.8 35.4 28.3 G 6.10 132 2.3 2.5 90.2 91.7 91.7 0.70 0.80 0.85 1.25 11.9189 35 77 580 62

885 364/5T3) 76.8 38.4 30.7 G 5.70 175 2.2 2.2 89.5 91.0 91.0 0.66 0.75 0.79 1.25 23.4554 48 106 882 60

3550 324TS 92.3 46.1 36.9 G 6.40 59.6 2.3 2.4 91.0 91.7 91.7 0.84 0.88 0.89 1.25 4.89550 36 79 516 79

1770 324T3) 95.3 47.6 38.1 G 6.00 119 2.3 2.3 91.7 93.0 93.0 0.76 0.83 0.85 1.25 7.85344 28 62 542 71

1175 364/5T3) 94.3 47.1 37.7 G 6.30 180 2.3 2.3 92.4 93.0 93.0 0.76 0.83 0.86 1.25 23.4554 35 77 882 65

885 364/5T3) 105 52.4 41.9 G 5.60 239 2.2 2.2 89.5 91.0 91.0 0.66 0.75 0.79 1.25 29.0401 42 92 953 60

3555 326TS 113 56.5 45.2 G 6.50 73.4 2.3 2.3 91.0 92.4 92.4 0.83 0.88 0.89 1.25 5.32131 33 73 549 79

1770 326T3) 116 57.8 46.2 G 6.10 147 2.3 2.3 92.4 93.6 93.6 0.77 0.83 0.86 1.25 9.16260 25 55 595 71

1180 364/5T3) 116 58.1 46.5 G 6.30 221 2.5 2.7 92.4 93.0 93.0 0.74 0.82 0.86 1.25 29.0401 39 86 882 65

885 404/5T3) 130 64.9 51.9 G 5.60 295 2.2 2.1 90.2 91.7 91.7 0.69 0.75 0.78 1.25 34.6247 27 59 1169 60

3555 364/5TS 138 69.0 55.2 G 6.30 89.2 2.0 2.5 91.0 92.4 93.0 0.80 0.87 0.88 1.25 8.51337 61 134 807 83

1775 364/5T3) 134 67.0 53.6 G 6.40 179 2.0 2.3 93.0 93.6 93.6 0.80 0.87 0.90 1.25 17.4382 23 51 853 75

1180 404/5T

3) 140 70.1 56.1 G 6.30 269 2.5 2.7 93.0 93.6 93.6 0.74 0.83 0.86 1.25 34.6247 32 70 1067 65

885 404/5T 154 77.0 61.6 G 5.80 358 1.7 2.1 91.0 91.7 91.7 0.70 0.76 0.80 1.25 36.8586 13 29 1308 60

3550 364/5TS 165 82.5 66.0 G 6.50 109 2.0 2.6 91.7 93.0 93.0 0.83 0.89 0.90 1.25 10.6420 46 101 915 83

1775 364/5T3) 165 82.4 65.9 G 6.50 218 2.2 2.4 93.6 94.1 94.1 0.82 0.87 0.89 1.25 19.9295 22 48 900 75

1175 404/5T3) 174 86.8 69.4 G 6.30 330 2.5 2.6 93.0 93.6 93.6 0.72 0.81 0.85 1.25 36.8584 23 51 1136 65

890 444/5T 179 89.4 71.5 G 6.10 436 1.7 2.1 91.7 92.4 93.0 0.73 0.80 0.83 1.25 73.6255 41 90 1484 63

3550 404/5TS 226 113 90.4 G 6.40 149 2.0 2.4 91.7 93.6 93.6 0.84 0.88 0.89 1.25 11.9190 38 84 1206 84

1775 404/5T3) 229 115 91.6 G 6.30 298 2.1 2.2 93.6 94.5 94.5 0.80 0.86 0.87 1.25 27.4029 18 40 1118 75

1185 444/5T3) 241 121 96.4 G 6.00 446 2.2 2.6 93.0 94.1 94.1 0.70 0.80 0.83 1.25 73.6254 48 106 1544 70

890 444/5T 244 122 97.6 G 6.10 594 1.7 2.0 92.4 93.0 93.0 0.73 0.80 0.83 1.25 87.2598 29 64 1724 63

3560 444/5TS 263 131 105 F 6.60 178 2.0 2.5 92.4 94.1 94.5 0.84 0.90 0.91 1.15 27.9231 72 158 1625 84

1780 444/5T3) 275 138 110 G 6.40 356 2.0 2.2 93.6 94.5 94.5 0.77 0.84 0.87 1.15 45.7301 35 77 1471 79

1185 444/5T3) 283 141 113 G 6.30 535 2.1 2.3 93.6 94.1 94.1 0.74 0.80 0.85 1.15 87.2597 40 88 1874 70

890 447T 290 145 116 G 6.10 713 1.7 2.0 93.0 93.6 93.6 0.73 0.80 0.83 1.15 103.6210 30 66 2044 66

890 504/5T 290 145 116 G 6.10 713 1.7 2.0 93.0 93.6 93.6 0.73 0.80 0.83 1.15 103.6210 30 66 2044 66

125 90

75 55

100 75

50 37

60 45

30 22

40 30

20 15

25 18.5

10 7.5

15 11

5 3.7

7.5 5.5

2 1.5

3 2.2

1 0.75

1.5 1.1


20/83



Allowable

locked Rotor

Time (s)

Approx.

Weight

(lb)

Sound

dB(A)% of full load

Efficiency Power Factor C

Date post:	17-Oct-2015
Category:	Documents
Upload:	fatrasky
View:	18 times
Download:	0 times

355 - NEMA Multicatalogue New

Documents