3Z Telecom, Inc www.3ZTELECOM.com US+1(954)581-6565

3Z RF ALIGNER

GPS Antenna Alignment Tool

Value Proposition:

• Install Antennas right the first Time-No Go Backs!

• Easy to read 4.3” Built-in Color LCD Display

• Measure Azimuth, Tilt, Roll and AGL in one-step

• Microwave Dish Alignment Mode

• Universal Antenna Clamp fits 99% of Panel Antennas

• Record Field Measurements Instantly

• No Post Processing Software Required

• Easy USB Plug and Play Results Retrieval

• Carrier Approved Closeouts

Infor-3Z RF Aligner GPS Antenna Alignment Tool

Tower Crews

3Z Telecom, Inc. 3361 Executive Way, Miramar, FL, 33025

Contact a Sales Representative at (954)-581-6565 or Sales@3ZTelecom.com

Overview:

The 3Z RF Aligner is the most compact GPS Antenna Alignment Tool in the industry. It incorporates GPS Technology to calculate precise Azimuth, Tilt, Roll, and AGL measurements for a multitude of directional antenna systems. Our universal antenna mounting system is used for quick antenna attachment and release. The 3Z RF Aligner is user friendly and easy to transport up any tower. Save all your antenna installation measurements for recordkeeping and reporting, easily accessible over USB.

Built-in Carry Handle 2-Step Antenna Clamp

Value Proposition:

• Verify Proper Antenna Installation by Tower Crews

• Troubleshoot Site Performance Issues, Improve KPIs

• Properly Identify Antenna Placement during New Site Design

• Replace your compass, range finder, and GPS with one Device

• A magnetic compass cannot be used on most rooftops, the 3Z RF Aligner can be used anywhere a GPS signal is available.

Infor-

Ensure Proper 4G Antenna Integration & Performance

When 4G Antennas are installed the 3Z RF Aligner helps the RF Engineers ensure antenna azimuth is within target specifications.

3Z Telecom, Inc. 3361 Executive Way, Miramar, FL, 33025

Contact a Sales Representative at (954)-581-6565 or Sales@3ZTelecom.com

3Z RF Aligner GPS Antenna Alignment Tool

RF Engineers Overview:

The 3Z RF Aligner was designed by RF Engineers for RF Engineers. During site inspections, site trouble-shooting, and new site design most RF Engineers carry a compass, GPS, and a range finder. The 3Z RF Aligner replaces all these devices, making field visits a breeze.

Kit Includes Extendable Monopod

Infor-

TECHNICAL SUPPORT

We offer training, repair, yearly

inspections, software support and

field support. Your technical

support team are experts in all

facets of the 3Z RF Aligner. New

Software release, no problem,

our dedicated team of profes-

sional will guide you through this

process.

EXPERIENCE

The 3Z RF Aligner has been

designed with the input of RF

Engineers, Tower Construction

Managers, Tower Technicians,

and Cell Site Technicians.

Virtually all aspects and scenarios

from this team of experts were

taken into consideration when

designing the 3Z RF Aligner. The

result is the most state of the art,

compact, user friendly Antenna

Alignment tool in the market.

QUALITY CONTROL

The 3Z RF Aligner meets an

exceed the industries most

demanding manufacturing specs.

We take pride in the quality of

our manufacturing and

understand the importance of a

dependable product.

3ZRFA Dimensions Length: 18.75 inches

Width: 5.375 inches

Height: 4.5 inches

Weight: 3.675 lbs

Accuracy Heading: <0.75° RMS*

Tilt/Roll: <0.5° RMS*

Position: < 1m RMS*

Altitude/Height: < 2m RMS*

LCD Display Interface: Touch

Visibility: Backlighting

Type: TFT WQVGA

Size: 4.3 inches

Pixels: 480x272

Battery: Internal Battery: Lithium-Ion

Operation Time: 11 Hours

Charge Time: 5 Hours

Charger: Voltage: 100-240VAC

Current: 0.3VAC

Max. power: 40W

Rating frequency: 50/60Hz

LED Indicator: Green=Full

Communications Type: Mini-USB

Memory Type: Internal

Size: 2GB

Environmental Operating Temp: -20°C to 60°C

(-4°F to 140°F)

Storage Temp: -40°C to 85°C

(40°F to 185°F)

Humidity: 95% Non-Condensing

Vibration: IEC60945

EMC: FCC Part 15, Sub

partB, CISPR22, CE

On-Screen Data

Antenna: Site ID, Sector ID, Antenna ID,

Azimuth, Tilt, Roll, Time, Date,

Height, Datum, Lat/Lon.

Microwave Dish: Path Name, Target Lat/Lon,

Target Height, Target Azimuth,

Target Tilt, Time, Date, Height,

Datum, Lat/Lon.

Antenna Clamp

Length: 24.0 inches

Width: 5.0 inches

Height: 4.52 inches

Weight: 4.21 lbs

3Z Telecom, Inc. 3361 Executive Way, Miramar, FL 33025

Contact a Sales Representative at 954-581-6565 or Sales@3ZTelecom.com

3Z RF Aligner Technical Specifications

*Depends on multipath environment, # of satellites in view, satellite geometry & ionospheric activity