-1-

ICME’2017 Conference Program

December 18-20, 2017, Sousse, TUNISIA

The 3rd International Conference

on Mechanics and Energy

www.icme.aicme.net

AICME LASEM

-1-

ICME’ 2017 Conference Program

Wednesday/ December 20, 2017 Tuesday/ December 19, 2017 Monday/ December 18, 2017 Time

Welcome and registration

08:00

Keynote 10 / Keynote 11

Keynote 12

Keynote 6 / Keynote 7 08:30

Oral session 3 Official Opening Ceremony

09:30

Oral session 6

10:00

Keynote 1 10:15

Coffee break 10:30

Coffee break 10:45

Oral session 4

11:00

Keynote 2 / Keynote 3

11:15

Coffee break 11:30

Closing Ceremony / Attestation

Distribution

12:00

Lunch Lunch 12:30

Keynote 8/ Keynote 9 / Keynote 10 Keynote 4 / Keynote 5

14:00

14:30

Oral session 1

15:00

Poster / oral presentation Coffee break 15:45

Oral session 5

Coffee break 16:30

Oral session 2 17:00

Dinner Dinner 19:00

-2-

Monday/ December 18, 2017

REGISTRATION

08H00-10H00

OFFICIAL OPENING CEREMONY

10H00-10H15

-3-

Chair: Pr. M. S. Abid (Room 1)

Keynote 1 10H15-10H45

PRs for Energy Recovery in Water Transport and Distribution Systems

Università degli Studi di Palermo, V.le delle Scienze, 90128 Palermo

Speaker: Pr. Tullio Tucciarelli Italy

COFFEE BREAK

10H45-11H15

Chair: Pr. M. S. Abid (Room 1)

Keynote 2 11H15-11H45

Modeling and numerical simulation of turbulence effect on the entropy in rotating flows Faculty of Science of Gafsa, Gafsa

Speaker: Pr. Maher Raddaoui Tunisia

Keynote 3 11H45-12H15

Laminar mixed convection for a Bingham fluid in an annular horizontal duct

Laboratoire de développement en mécanique et matériaux (LDM2), Department ST, Ziane Achour University, Djelfa, Algeria

Speaker: Pr. Horimek Abderrahmane Algeria

LUNCH TIME

12H15-14H00

Chair: Pr. H. Kchaou (Room 1)

Keynote 4 14H00-14H30

Numerical study of mixed convection inside a lid-driven square cavity filled with non-Newtonian thermo-dependent fluids

Laboratory of Flows and Transfers Modeling (LAMET), Faculty of Sciences and Technologies, Sultan Moulay Slimane University

Speaker: Pr. Kaddiri Mourad Morocco

-4-

Keynote 5 14H30-15H00

POD investigation of the plane turbulent wall jet: application to vertical refrigerated display cabinet

Refrigerating Process Engineering Unit, Irstea Antony, 1 rue Pierre-Gilles de Gennes – CS10030, 92761 Antony Cedex, France

Speaker: Dr. Ahmad Kaffel France

ORAL SESSION N°1

15H00-16H30

SS _ Computational Fluid & Structure Dynamics

Chair: Pr. M. Raddaoui (Room 1) 1. ICME-15: Numerical simulation of dynamics and morphology of air bubbles in different liquids using Volume of Fluid (VOF) method Wassim Abbassi, Sonia Besbes, Habib Ben Aissia 2. ICME-24: Numerical Simulation Of Cavitating Flow In A Venturi Nozzle Using Openfoam Aicha ABBASSI, Ridha ZGOLLI 3. ICME-47: Control effect of a rear surface flexibility of a circular cylinder on the fluid flow behavior Nabaouia Maktouf, Ali Ben Moussa, Said Turki 4. ICME-77: Meshing effect on a 3D axisymmetric simulation of diesel engine configuration Olfa Moussa, Ahmed Ketata, Haithem Nasraoui, Zied Driss 5. ICME-145: Introduction Of The Bray Number In Modeling Turbulent Premixed Flames Stabilized In A Stagnating Turbulent Flow Ahmed Neche and ZineddineYoubi 6. ICME-50: Analysis into pressure pulsations and radial forces in a centrifugal pump using numerical methods Marwa Ennouri, Hatem Kanfoudi, Ridha Zgolli, Ahmed Bel Hadj Taher

SS _ Renewable energy / Computational Fluid & Structure Dynamics

Chair: Pr. T. Tucciarelli (Room 2) 1. ICME-61: Solar concentration using flat reflectors: parametric study and experimental investigation Mahmoud Souissi , Zied Guidara, Aref Maalej 2. ICME-35: Vertical Axis Wind Turbine for electricity generation and water pumping Zied Guidara, Zied Driss 3. ICME-104: A mathematical correlation to estimate the magnitude velocity of the air flow within a solar chimney power plant Ahmed Ayadi , Abdallah Bouabidi, Haythem Nasraoui, Zied Driss, Mohamed Salah Abid 4. ICME-78:Impact of the divergent chimney on the local characteristics of the solar chimney power plant Haythem Nasraoui, Ahmed Ayadi, Abdallah Bouabidi, Zied Driss, Hedi Kchaou 5. ICME-63: Turbulence multi-scale modeling in bubbly flows Fathia Chaibina, Ghazi Bellakhal and Jamel Chahed 6. ICME-100: parametric study of convective heat transfer on LNG tank equipped with cooling systems Mohamed Haddar, Moez Hammami and Mounir Baccar

-5-

SS _ Computational Fluid & Structure Dynamics

Chair: Pr. O. Abdeen (Room 3) 1. ICME-17: Steady-state analysis of water distribution networks including controlling elements Lahiouel Yasmina 2. ICME-29: A study of the asymptotic equilibrium behavior in rotating homogeneous shear flow using the Gibson- Launder model Saida Naifer, Mounir Bouzaiane 3. ICME-13: Resolution of the heat equation in the square form Oven Part –II- Taloub Djedid, Beghidja Abdejhadi, Bouras Abdelkarim 4. ICME-146: 2-D numerical simulation of the heat transfer in solar air heater with pentagon-shaped ribs Hassene Djemel, Mohamed Kaffel, Mounir Baccar, Mohamed Mseddi 5. ICME-25: Application of exergy Application of Second Law Analysis to the Optimization of Plate Fin Air Pre-heater in Gas Turbine Cycle Saria Abed, Tahar Khir

COFFEE BREAK

16H30-17H00

ORAL SESSION N° 2

17H00-18H30

SS _ Heat and mass transfer

Chair: Pr. M. Kaddiri (Room 1) 1. ICME-126: Study of the fluid flow inside sulphur boiler: Meshing effect Souhir Echi, Abdallah Bouabidi, Zied Driss, Mohamed Salah Abid 2. ICME-22: 3D Analyze of the cavitation mechanism using Partially-Average Navier Stokes Hatem KANFOUDI, Marwa ElNouri, Ahmed BelHaj Taher and Ridha Zgolli 3. ICME-23: Aspect Ratio Effect on the Maximum Heat Transfer in a 3D Cavity Differentially Heated Maroua Nefzi, Nader Ben-Cheikh, Brahim Ben Beya 4. ICME-42: Numerical study of the geometrical greenhouse effect at the heat transfer exchange Lalmi Djemoui, Ridha Zarit, Hocine Bensaha, Salah Bezari et A.Benseddik 5. ICME-87: Natural convection for a Herschel-Bulkely fluid inside a differentially heated square cavity Horimek Abderrahmane, Djouaf Salah-Eddine, Nouereddine Ait-Messaoudene 6. ICME-106: Study of the natural ventilation in a residential living room with a solar patio Slah Driss, Zied Driss, Imen Kallel Kammoun, Mohamed Salah Abid

-6-

SS _ Computational Fluid & Structure Dynamics

Chair: Pr. A. Horimek (Room 2) 1. ICME-115: Equilibrium evaluation of the Reynolds anisotropy tensor models in the compressible homogeneous sheared turbulence Mohamed Riahi, Marwa Dhaoui and Taieb Lili 2. ICME-116: Equilibrium evaluation of pressure-strain correlation models for compressible homogeneous sheared turbulence Marwa Dhaoui, Mohamed Riahi, Taieb Lili and Brahim Ben Beya 3. ICME-123: Numerical comparison between a conventional and a four-stage Savonius wind rotor Sobhi Frikha, Zied Driss, Emna Ayadi, Zied Masmoudi, Mohamed Salah Abid 4. ICME-107: Unsteady simulations of the aerodynamic structure in a heated box prototype Badis Bakri, Ahmed Ketata, Slah Driss, Zied Driss, Hani Benguesmia and Fareh Hamrit

SS _ Mechanical and physical investigations

Chair: Pr. A. Kaffel (Room 3) 1. ICME-38: Application of A Basquine Model On Fatigue Tests of aFragile Material S. Achouri, S.Tlili, D.Berdjane 2. ICME-147: Analytical identification of rate cooling effect on the mechanical and microstructural behavior of a strength steel during controlled rolling D. Berdjane, S. Achouri, O. Ghelloudj, R. Benchouieb, F. Lemboub 3. ICME-3: Influence of material constitutive laws on shot peening residual stress prediction R. Seddik, D. Ben Abdeljelil, A. Atig, R. Fathallah 4. ICME-6: Prediction of surface conditions induced by Ultrasonic Shot Peening after repetitive impacts S. Manchoul , R. Ben Sghaeir, R. Fathallah 5. ICME-7: Evaluation of The Residual Stress Relaxation Induced by Machining on The AISI 316L Steel R. Grissa , F. Zemzemi and R. Fathallah 6. ICME-2: Relaxation of residual stresses induced by shot peening R. Seddik, A. Atig, R. Ben Sghaier, R. Fathallah

DINNER TIME

18H45

-7-

Tuesday/ December 19, 2017

Chair: Pr. M. S. Abid (Room 1)

Keynote 6 08H30-09H00

Turbulent hydrodynamic measurements near solid boundaries: Quo Vadis?

Water Engineering Laboratory, Infrastructure and Environment Research Division, School of Engineering, University of Glasgow, Glasgow G12 8LT, UK

Speaker: Pr. Manousos Valyrakis UK

Keynote 7 09H00-09H30

Study of a solar air heater test bench Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax (US), B.P.

1173, Road Soukra km 3.5, 3038 Sfax, TUNISIA

Speaker: Pr. Zied Driss Tunisia

ORAL SESSION N° 3

09H30-10H30

SS _ Fluid and structure interaction / Renewable energy

Chair: Pr. M. Valyrakis (Room 1) 1. ICME-10: Numerical Modeling of Unsteady Flow and Cavitation Erosion Ahmed Bel hadj taher*, Hatem Kanfoudi, Ridha Zgolli, Marwa Ennouri 2. ICME-49: Hygrothermal behavior of polyester /glass fiber composite in sea water Mohamed Ounaies, Manel Harchay , Fackhreddine Dammak, Hachmi Ben Daly 3. ICME-88: Performance analysis of three blades helical Savonius water rotor Mabrouk Mosbahi, Zied Driss, Ibrahim Mabrouki, Mohamed Salah Abid 4. ICME-105: Study and design of a solar chimney power plant turbine Ahmed Ayadi , Haythem Nasraoui, Abdallah Bouabidi, Zied Driss, Mohamed Salah Abid 5. ICME-21: Liquid-liquid binary mixture countercurrent flow in a structured packed-bed Hajer Troudi, Moncef Ghiss, Zoubeir Tourki, Mohamed Ellejmi

SS _ Mechanical and physical characterization

Chair: Pr. H. Kchaou (Room 2) 1. ICME-157: Study of the interfacial properties of the date palm-polyester fiber composite Mahmoudi Noureddine, Bouregba Rachid and Benaoum Abdelhak 2. ICME-158: Experimental analysis of Implant?cement interfacial behaviour under shear mode loading conditions BOUZIANE Mohamed Mokhtar, Nourddine Benseddiq, Zerdali Mokhtar, Boualem Serier, Mokhtar Khaldi 3. ICME-93: A 1D finite-difference wave action code for radial turbomachinery performance prediction Ahmed Ketata, Zied Driss 4. ICME-28: The effect of printing direction of FDM technology Sana Abid, Hedi Nouri, Hachemi Ben Daly

-8-

COFFEE BREAK

10H30-11H00

ORAL SESSION N° 4

11H00-12H30

SS _ Mechanical and physical characterization

Chair: Pr. Z. Driss (Room 1) 1. ICME-58: Effect of Hydrogen on the structural and mechanical properties of a ternary metallic glass Wafa Dandana, Mohamed Abdelbasset Youssfi, Khalil Hajlaoui 2. ICME-18: Validity study of transient dynamic FE simulation of waterjet peening Rihem Amri, Adnen Laamouri, Raouf Fathallah, Habib Sidhom 3. ICME-151: Alkali treatment of Doum palm fiber for reinforcement of cement mortar Fatma Zahra Naiiri, Allegue Lamis, Mondher Zidi 4. ICME-141: Design of advanced aerovoltaic on-grid system Ismail Baklouti, Zied Driss 5. ICME-71: High-speed machining: study of thermomechanical behavior Sana Ben Khlifa, Ltaief Laamari, Hassen Kharroubi

SS _ Mechanical engineering and innovation

Chair: Pr. R Triki (Room 2) 1. ICME-64: flexible slider crank mechanism design using genetic algorithm optimization Mohamed Amine Ben Abdallah, Imed Khemili, Nizar Aifaoui 2. ICME-66: Assembly Sequence Planning: a comparison between geometric reasoning and Ant Colony Optimization Riadh Ben Hadj, Imen Belhadj, Moez Trigui, Nizar Aifaoui 3. ICME-4: Probabilistic high cycle fatigue behavior prediction of C35 steel based on a useful equivalent Wöhler curve Maroua Saggar, Anouar Nasr, Chokri Bouraoui 4. ICME-5: Improved fatigue damage accumulation and lifetime prediction of defective material subjected to block loading Maroua Saggar, Chokri Bouraoui

LUNCH TIME

12H30-14H15

-9-

Chair: Pr. C. Bradai (Room 1)

Keynote 8 14H15-14H45

3D method and codes for fluid structure interaction problems in Euler variables

Research institute for mechanics of Lobachevsky state university of Nizhni Novgorod Russia 603950 Nizhni Novgorod Gagarine av. 23 bl.6

Speaker: Pr. Mustafa Abuziarov Russia

Keynote 9 14H45-15H15

Interoperability of CAD and simulation applications in complex product context

Laboratory of Mechanical engineering (LGM), National Engineering School of Monastir (ENIM), University of Monastir (UM), Av. Ibn Eljazzar, 5019, Monastir, TUNISIA

Speaker: Pr. Nizar Aifaoui Tunisia

Keynote 10 15H15-15H45

A comparative study between the transport of fresh water via land and sea Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax (US), B.P.

1173, Road Soukra km 3.5, 3038 Sfax, TUNISIA

Speaker: Pr. Riadh Triki Tunisia

COFFEE BREAK / POSTER SESSION

15H45-16H30

ORAL SESSION N° 5

16H30-18H30

SS _ Mechanical engineering / Modeling optimization

Chair: Pr. Z. Driss

(Room 1)

1. ICME-52: Dynamic modeling of spherical parallel robot 3-URU Hanen EL Golli , Ajmi HOUIDI , Abdelfatteh MLIKA, Safa MECHRI 2. ICME-140: Implementation of performance degradation in shape memory alloy during cyclic loading Riheme SARRAJ, Wissem Elkhal Letaief, Tarek HASSINE and Fehmi GAMAOUN 3. ICME-74: Disassembly sequence plan of subassemblies based on interference matrices Imen Belhadj, Moez Trigui, Abdelmajid Benamara 4. ICME-117: Different models of a Roots compressor Nesrine HMIDA , Moez CHAFRA ,Toufik KANIT 5. ICME-150: Modeling and simulation of a Direct Steam Generating Parabolic Trough Collector: Performance

-10-

analysis for Tunisian climatic conditions Souha Ferchichi, Hamdi Kessentini, Chiheb Bouden 6. ICME-45: Simulation Of An Insulator Model Of HV Using COMSOL Multiphysics Software Under Alternative Current Nassima M’ziou, Hani Benguesmia, Adel Kara, Hilal Rahali, Islam Nacereddine ElGhoul 7. ICME-46: Experimental Study And Simulation with COMSOL Multiphysics Influence of Pollution on HV insulator Under AC Voltage Hani Benguesmia, Nassima M’ziou, Yacine Bourek3, Adel Kara, Islam Nacereddine El Ghoul

SS _ Mechanical characterization / Renewable energy

Chair: Pr. M. Abuziarov

(Room 2)

1. ICME-131: Drawing-induced structural transformation in Poly(lactic acid) Hanen Mahjoubi, Zoubeir Tourki, Fahmi Zairi 2. ICME-89: Numerical study of two-bladed and three-bladed helical Savonius water turbine Mabrouk Mosbahi, Zied Driss , Ibrahim Mabrouki , Mohamed Salah Abid 3. ICME-108: Unsteady flow simulation of a helical Darrieus water rotor Mabrouk Mosbahi, Zied Driss, Ibrahim Mabrouki, Mohamed Salah Abid 4. ICME-124: Experimental validation of a four-stage Savonius wind rotor Sobhi Frikha, Zied Driss, Emna Ayadi, Zied Masmoudi, Mohamed Salah Abid 5. ICME-161: Experimental Analysis Of Flow Of A Combined Three Bladed Darrieus And Savonius Water Rotor Ibrahim Mabrouki, Zied Driss, Mohamed Salah Abid 6. ICME-159: A phase field approach for study a thermal shock in brittle fracture Dhahri Marwa, Radhi abd elmoula, Yamen maalej

SS _ Mechanical engineering and innovation

Chair: Pr. M. S. Abid (Room 3) 1. ICME-30: Fatigue life prediction model for defective A356-T6 based on response surface approach Amal Ben Ahmeda, Ahmed Bahloulb, Mohamed Iben Houriyaa, Raouf Fathallaha 2. ICME-31: Simulation of the Kitagawa-Takahashi Diagrams for defective A356-T6 alloy including SDAS effects Amal Ben Ahmeda, Ahmed Bahloulb, Mohamed Iben Houriyaa, Raouf Fathallaha 3. ICME-127: Effect of the SDAS scatter on the A356-T6 High Cycle Fatigue behavior Amal Ben Ahmeda, Mohamed Iben Houriyaa, Raouf Fathallaha 4. ICME-9: Analytical bending stress model of parabolic leaf spring incorporating the effect of the radius of curvature Akram Atig, Rabï Ben Sghaier, Raoudha Seddik and Raouf Fathallah 5. ICME-20: Probabilistic approach for predicting fatigue life of rubber like materials Salma Belkhiria, Rawdha Seddik, Raouf Fathallah 6. ICME-26: Influence of cutting conditions on white layers thickness using response surface method Samar Arfaoui, Farhat Zemzemi, Zoubeir Tourki 7. ICME-69: Fatigue design and weight optimization of an Anti-roll Bar Ahmed Slimena, Rabi Ben Sghaierb,Raouf Fathallaha

DINNER 19H00-21H00

-11-

Wednesday/ December 20, 2017

Chair: Pr. C. Bradai (Room 1)

Keynote 11 08H30-09H00

Renewable Energy Technologies, Sustainable Development and Environment

Energy Research Institute (ERI)), Nottingham NG7 4EU, UNITED KINGDOM

Speaker: Pr. Abdeen Omer UK

Keynote 12 09H00-09H30

Computations of turbulent non-premixed combustion and modeling of flame wall interaction

Laboratory of aeronautical sciences, institute of aeronautics and space studies, University of Blida1, Algeria

Speaker: Pr. Rachid Renane Algeria

Keynote 13 09H30-10H00

Technical-Economic Optimization of an Autonomous Photovoltaic System for Pumping Water

Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax (US), B.P. 1173, Road Soukra km 3.5, 3038 Sfax, TUNISIA

Speaker: Pr. Wissem Zghal Tunisia

ORAL SESSION N° 5

10H00-11H30

SS _ Experimental and modeling investigation

Chair: Pr. R. Renane

(Room 1)

1. ICME-65: Cyclic Nanoindentation of TiO2 thin film Hafedh Dhiflaoui, Kaouther Khlifi, Ahmed Ben Cheikh Laarbi 2. ICME-95: Photoelastic Analysis and Finite Element Analysis of a Stress Field Developed in a Three Points oaded Disc Boudjemaa Djebarri, Ali Bilek, Said Larbi, Said Djebali 3. ICME-55: Sliding Mode Control of a Five-Phase Series-Connected Two-Motor Drive Omar Zouaid, Lazhari Nezli 4. ICME-114: The Reynolds number effect on human body in indoor environment Hasna Abid , Zied Driss , Jamel Bessrour

-12-

SS _ Modeling and optimization techniques of renewable energies

Chair: Pr. N. Aifaoui

(Room 2)

1. ICME-164: Numerical study of the performance of the helical Bach rotor Ali Damak, Zied Driss, Mohamed Salah Abid 2. ICME-166: Improvement of engine inlet system: Case of CLIO 2 engine converted to LPG-Hydrogen blends Sahar Hadjkacem, Mohamed Ali Jemni, Mohamed Salah Abid 3. ICME-27: Simulation of turbulent flows and heat transfer in solar air heater with inclined reverse L-shaped ribs Hassene Djemel , Mohamed Kaffel, Mounir Baccar, Mohamed Mseddi 4. ICME-154: Numerical model of a solar thermal molten salt external central tower receiver Hamdi Kessentini, Chiheb Bouden

SS _ Renewable energy / CFD

Chair: Pr. W. Zghal

(Room 3)

1. ICME-33: Analytical study on the effect of hydrogen enrichment on gasoline SI engine Mohamed Brayek, Mohamed Ali Jemni, Gueorgui Kantchev,Mohamed Salah Abid 2. ICME-67: Exergy and energy analysis of the solar drying processes of tomatoes in Tunisia Ilhem HAMDI, Aymen ELKHADRAOUI, Sami KOOLI 3. ICME-96: A techno economic study of wind energy potential using wind energy turbines for electricity generation in two region of Algeria Belabes Belkacem, Louassa Samira , Guerri Ouahiba 4. ICME-99: CFD simulation of a solar still improvement for preheating A. Khechekhouche, Z. Driss, B. Ben Haoua, M.E. Attia 5. ICME-132: Optimizing of the swirling flow of a four cylinders spark ignition engine using a guide vane tool Mohamed Ali Jemni, Mariem Ammar, Mohamed Salah Abid

COFFEE BREAK

11H30-12H00

CLOSURE CEREMONY / BEST PAPERS AWARDS / ATTESTATION DISTRUBITION

12H00-12H30

-13-

Chairs: Pr. A. Omer

(Room 2) Poster Session

(This session is taking place on Tuesday afternoon 15H45 – 16H30)

1. ICME-12: Dry Sliding Wear Behaviour of Ti3SiC2 and the Effect of TiC on its Seif-Eddine Bendaoudi, Mokhtar Bounazef, Ali Djeffal 2. ICME-14: The Influence of the Debit and the Orientation of a Solar Converter Abdelkarim. Bouras, N. Bellel,Taloub Djedid, B. Bakri 3. ICME-16: Effect of the MHD in rotation using decaying homogeneous turbulence Zouaoui Jihene, Marzougui Hamed, Lili Taieb 4. ICME-19: THERMAL EFFICIENCY EVOLUTION OF SOLAR WATER HEATING SYSTEM Mokhtar Ghodbane, Boussad Boumeddane, Abderrahmane Khechekhouche 5. ICME-36: Inhibition Of The Corrosion Of The Alloy Cupr A Medium (0,5m Nacl) Essom Hamida 6. ICME-37: Application of a Mechanical-Probabilistic Model of the Rupture Mode for a Non Alloy Steel Calm Aluminum by Simulation in Direct Traction Monotone. S. Achouri, O. Ghelloudj, S. Tlili, D. Berdjane, R. Benchouieb, F. Lemboub 7. ICME-39: Influence of the cellulosic and basic fluxes of the electrode on the micro-hardness and the microstructures during the smaw welding of a pipeline. Farida Khamouli, Adel Saoudi, L’hadi Atoui 8. ICME-40: Relationship Between Network Dislocations and Nonstoichioimetry in rutile TiO2 A . Mebarek , A. Boussada 9. ICME-43: Biodiesel produced from waste cooking oil and their application on the engine diesel Olfa Moussa, Meriem Harabi, Zied Driss, Mohamed bouaziz 10. ICME-48: Effect of the threading process on the mechanical and tribological behaviors of the triangular thread Ayadi Ibrahmi, Moncef Hbaieb , Abdelkader Krichen 11. ICME-56: Study of transient condensation occurring during the starting of the evaporation of a droplet deposited on a heated substrate Dorra KHILIFI,Walid FOUDHIL, Kamel FAHEM,Souad HARMAND,Sadok BEN JABRALLAH 12. ICME-57: Structural, electronic, optical and thermoelectric properties of the intermetallic materials based on Mg2X (X= Si, Ge, Sn): DFT calculations Miloud Ibrir, Moufdi Hadjab, Said Lakel and Nafissa Meggag 13. ICME-60: Numerical simulation of three-dimensional natural convection around an inner heated sphere located in a cubic enclosure. HediaWelhezi, Nader Ben-Cheikh, Brahim Ben-Beya 14. ICME-62: Numerical Simulation of the Thermal and Convective Behavior Inside and Outside a Sessile Volatile Liquid Droplet W. FOUDHIL, D. KHILIFI, K. FAHEM, S. HARMAND and S. BEN JABRALLAH 15. ICME-68: Solar dryer with thermal energy storage Zaineb Azaizia, Sami Kooli 16. ICME-70: Effect of the impeller type on the flow pattern in a torus reactor Khalida Bekrentchir, Abdelkader Debab, Mallika Khalladi 17. ICME-72: Analytical solution of the interfacial stress in reinforced-concrete beams reinforced with bonded prestressed FGM plate RABAHI Abderezak, BENFERHAT Rabia, HASSAINE DAOUADJI Tahar, ADIM Belkacem, ZIDOUR Mohamed 18. ICME-76: 3-D simulation of the cold flow in an axisymmetric diesel engine configuration Olfa Moussa, Ahmed Ketata , Dorra Driss, Zied Driss 19. ICME-79: Meshing effect on the numerical modeling of the solar chimney power plant Haythem Nasraoui, Abdallah Bouabidi, Zied Driss, Ahmed Ayadi, Hedi Kchaou 20. ICME-80: Experimental study of a double pass solar air heater with a fan delivery side insulation Oumaima Eleuch, Zied Msaed, Badis Bakri, Zied Driss 21. ICME-81: Numerical study of a double pass solar air heater with a fan delivery side insulation Oumaima Eleuch, Badis Bakri, Zied Msaed, Zied Driss 22. ICME-82: Study of the pivoting system of a double pass solar air heater Oumaima Eleuch, Zied Msaed, Badis Bakri, Zied Driss 23. ICME-83: Static study of a double pass solar air heater support Oumaima Eleuch, Zied Msaed, Badis Bakri, Zied Driss

-14-

24. ICME-84: The Effect of Hydrogen Fuel Enrichment on a Flame of Methane: Application to a Cylindrical Combustion Chamber Mohammed El hadi Attia, Ali Boukhari, Zied Driss and Fethi Bouras 25. ICME-85: Numerical investigation of an hyperboloid solar chimney power plant Haythem Nasraoui, Ahmed Ayadi, Abdallah Bouabidi, Hedi Kchaou, Zied Driss 26. ICME-90: Turbulence models impact on the prediction of flow structure and performance of a turbocharger mixed flow turbine Ahmed Ketata, Zied Driss 27. ICME-91: Meanline analysis of a mixed flow rotor with different volute-rotor interspaces Ahmed Ketata, Zied Driss 28. ICME-92: A FORTRAN program for mean path analysis of a VGT mixed flow turbine Ahmed Ketata, Zied Driss 29. ICME-94: A test rig development for performance map building of one turbocharger vane-less radial turbine Ahmed Ketata, Zied Driss 30. ICME-102: Numerical study of a Banki-Michell turbine Marwa Hannachi, Tullio Tucciarelli, Marco Sinagra, Zied Driss 31. ICME-103: Modeling of the plates of a distillation column by bond graph tool Samia Latreche, Abd Essalam Badoud, Mabrouk Khemliche, Houssem Eddine Amara 32. ICME-109: Effect of the inlet temperature on the numerical simulation in indoor environment Hasna Abid , Zied Driss , Jamel Bessrour 33. ICME-111: Fault Detection and Isolation in Electromechanical System Using Analytical Redundancy Relations Samia Latreche, Abd Essalam Badoud, Houssem Eddine Amara, Mabrouk Khemliche 34. ICME-112: Effect of Welding Process on Microstructure and Mechanical Properties of Duplex Stainless Steel Welds Ahmed Kellai,Azzedine Lounis, Sami Kahla, Amar Boutaghane 35. ICME-113: Study of a solar chimney power plant Tayeb Chakroun, Ahmed Ayadi, haytham Nasraoui, Abdallah Bouabidi, Zied Driss 36. ICME-118: Investigation of the Intake manifold geometry effect on the in-cylinder flow characteristics of a thermal engine Amal Gargouri, Mohamed Ali Jemni, Hedi Kchaou, Mohamed Salah Abid 37. ICME-121: Numerical study of the coupling of the flat plate collector and a heat pump system associated with a horizontal heat exchanger for heating a greenhouses system R.CHARGUI, .S. AWANI . GUIZANI A. Allah 38. ICME-122: The Effect of The Orientation of a Surface On The Energy Received By a Thermal Converter Mustapha Meddah, Karim Bouras, Hani Benguesmia, Badis Bakri 39. ICME-125: Real Time Monitoring and Experimental Study in a Distillation Column by Bond Graph Approach Samia Latreche, Abd Essalam Badoud, Mabrouk Khemliche, Houssem Eddine Amara 40. ICME-128: Temperature Effects on Thermodynamic Parameters of a High Speed Flow Rachid Allouche1, Rachid Renane 41. ICME-129: Experimental analysis of a reel ejector refrigeration system – effect of primary fluid pressure Malek HAMZAOUI, Hakim NESREDDINE, Mourad BALISTROU, Adlane BENDAOUD 42. ICME-130: Modeling and Simulation of Drafting, Kissing and Tumblig (DKT) phenomena in an Incompressible Newtonian Fluid Zouaoui Salah, Djebouri Hassane, Mohammedi Kamal 43. ICME-133: Numerical investigation of sloshing phenomenon in a rectangular tank filled with water Saoussane Gouiaa, Abdallah Bouabidi, Zied Driss, Mohamed Salah Abid 44. ICME-134: POD analysis of turbulent flow in stirred vessel driven by Rushton turbine Bilel BEN AMIRA , Mariem Ammar, Ahmed KAFFEL, Zied DRIDD, Mohamed SALAH ABID 45. ICME-135: Application of scanning laser Doppler vibrometry for the study of guided waves in an aluminum plate Soufien Karous, Ludovic Labelle, Lei Meng, and Christ Glorieux 46. ICME-136: Etude micromécanique de l’interface fibre/matrice dans le composite luffah / matrice polyster Mahmoudi Noureddine, Khaldi Mokhtar, Benaoum Abdelhak 47. ICME-137: Numerical investigation of the piston shape effects on the swirl engine motion Siwar YAHYAOUI, Mohamed Ali JEMNI, Mariem AMMAR, Hedi KACHAOU 48. ICME-143: Characterization of on-grid PV installation with PVsyst in Sfax-Tunisia Ismail Baklouti, Zied Driss

-15-

49. ICME-144: Adhesion and mechanical properties of TiO2 coatings on PEEK by PVD process for medical implants Najoua Barhoumi , Kaouther Khlifi, Hafedh Dhifelaoui, Ahmed ben Cheikh Larbi 50. ICME-152: Numerical study of the collector inclination effect on the flow behavior within SCPP Abdallah Bouabidi, Haythem Nasraoui, Ahmed Ayadi, Zied Driss, Mohamed Salah Abid 51. ICME-155: Effect of surface treatment of loofah fibers on the interfacial properties of the loofah-polyester fiber composite Mahmoudi Noureddine, Benaoum Abdelhak1and Bouregba Rachid 52. ICME-142: TiO2 thin film coating on 316L stainless steel via PVD technique for biomedical application Kaouther Khlifi, Hafedh Dhifelaoui, Lina Sdiri, Ahmed ben Cheikh Larbi 53. ICME-160: Mechanical Properties of Short Alfa Fiber Reinforced Polypropylene Composites: Effect of Maleic Anhydrid Coupling Agent Khaldi Mokhtar, Mahmoudi Noureddine, Bouziane Mohamed Mokhta1, Benaoum Abdelhak, Alexandre Vivet 54. ICME-162: Correlation between the mechanical behavior and chemical, physical and thermal characteristics of wool: a study on Tunisian wool Takwa Bouaggaa, Taoufik Harizia, Faouzi Saklia, Marina Zoccola 55. ICME-165: Modeling and Simulation of Water-Oil flow in a fractured porous medium Djebouri Hassane, Zouaoui Salah, Mohammedi Kamal and Bilek Ali 57. ICME-168: Characterization and Valorization of the Algerian Hybrid Ecological Mineral Material Mahmoudi Noureddine and Bouregba Rachid 58. ICME-148: URANS analysis of turbulent flow in stirred vessel driven by Rushton turbine Mariem AMMAR, Bilel BEN AMIRA , Sarhan Karray, Mohamed Salah Abid 59. ICME-167: Effect of sulfuric acid on the behavior of a composite based polymer reinforced with vegetal fibers Mahmoudi Noureddine and Benaoum Abdellahak 60. ICME-11: Calcul des fréquences de vibration des structures sandwiches Lazreg Hadji, Nafissa Zouatnia, Mohamed Ait Amar Meziane 61. ICME-169: The effects preponderance of the acting parameters on the cavitation of Co-polymer using experimental design Abdel-nour Zaim, B. Bouchouicha, Abdelkader Miloudi

-16-