31
1 BUTT WELDING FITTINGS VIRGILIO CENA E FIGLI S.P.A. CENA
1buttweldingfittingsvirgilio cenae figli s.P.a.
cena
1buttweldingfittingsvirgilio cenae figli s.P.a.
CENA will have fun:
providing a challenging and supportive environment in which people are motivated to succeed together;
becoming a preferred supplier in all buttwelding fitting markets worldwide, renowned for providing technically superior, cost-effective products;
developing sustainable and profitable partnerships with all its key customers and suppliers globally.
2 3
CORPORATE NAME
ESTABLISHED IN
ADDRESS
PRODUCTION CAPACITY
AREA
Virgilio Cena & figli S.p.A.
1957
15.000 ton/year
via Oberdan 39 25128 Brescia Italyt. +39.030.398561 f. +39.030.398646
total area 60.000 m2covered area 27.750 m2
offices 800 m2
Fondata nel 1957, la societ VIRGILIO CENA & FIGLI S.p.a. specializzata nella fabbricazione di raccordi BW ricavati da tubo senza saldatura e sal-dato in acciaio al carbonio e basso legati. Con un area totale di 60.000m di cui 27.750 m coperti, la capacit produttiva di 15.000 ton/anno. La CENA opera principalmente in Europa con collaborazioni crescenti sui mercati internazionali. Le certificazioni ottenute nei settori petrolchimici, raffinerie, oil & gas e di generazione di calore e denergia ci permettono di meglio servire i nostri clienti.
Founded in 1957, VIRGILIO CENA & FIGLI S.p.a. is specialized in the manu-facturing of BW fittings from seamless and welded carbon and alloy steel pipes. With a total area of 60.000m of which 27.750m covered, the pro-duction capacity is 15.000 ton/year. CENA operates primarily in Europe with an increasing collaboration on international markets. Certifications obtained in the petrol-chemical, refinery, oil & gas fields, power stations and heat and energy generation sectors permit us to better service our clients.
virgilio cenae figli s.P.a.
4VIRGILIO CENA & FIGLI S.p.a. produces more energy than it uses thereby assuring a zero environmental impact.(Updated to 2009)
ENvIRONMENTALCOMPANY
THE fUTURE HAS LONg ROOTS. OURS gO BACk TO 1957
7americanstandard
MAtERIAL RANGE
PROdUCt RANGE
ShORt RAdIUS ELBOWS
LONG RAdIUS ELBOWS
ELBOWS 2.5d
ELBOWS 3d
ELBOWS 5d
CONCENtRIC REdUCERS
ECCENtRIC REdUCERS
EqUAL tEES
REdUCING tEES
CAPS
BUttWELdING ENdS
PRESSURE EqUIPMENt dIRECtIVE (PEd)
CERtIFICAtIONS
StEEL GRAdES FOR PIPES MOStLy USEd By CENAtO PROdUCE SEAMLESS ELBOWS
GENERAL SALES CONdItIONS
8
9
10
11
14
15
16
17
19
21
23
25
26
27
27
49
50
ASME B16.9
8 9
1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24 2821,3 26,9 33,7 42,4 48,3 60,3 73,1 88,9 101,6 114,3 141,3 168,3 219,1 273,0 323,8 355,8 406,4 457,2 508,0 609,6 711,2
3456789
101112131415161718192021222324252627282930313233
ASTM/ASMEPRODUCTION RANgESUMMERY
ASME fITTINg RANgE
ASME ELBOW RANgE
WPB WPC WP1 WP11 WP12 WP22 WP5
WPhy42 WPhy52 WPhy60 WPhy65 WPhy70
WPL6
WP9 WP91
MORE ExtENSIVE RANGE UPON REqUESt
MATERIALASTM/ASMEASTM/ASME A/SA 234
MSS SP75/ASTM A 860
ASTM/ASME A/SA 420
ASTM/ASME A/SA 234
** *
* ** Wall thickness (mm) diameter ( and mm)1d1.5d
1d1.5d3d
1d1.5d3d5d
Concentric Reducers3/4 x 1/2(Wt 2.87 x 2.77)
24 x 20 (Wt 12.70 x 12.70)
Eccentric Reducers1 x 3/4(Wt 3.38 x 2.87)
24 x 20(Wt 12.70 x 12.70)
Equal Tee1/2 x 1/2(Wt 2.77 x 2.77)
24 x 24(Wt 12.70 x 12.70)
Reduced Tee1/2 x 3/4(Wt 2.87 x 2.77)
24 x 20(Wt 12.70 x 12.70)
Caps1(Wt 3.38)
24(Wt 12.7)
fROM TO
ShORt RAdIUS ELBOWS 1 24
LONG RAdIUS ELBOWS 1 28
3d ELBOWS 1 16
5d ELBOWS 1 16
ShORt RAdIUS ELBOWS 1 8
LONG RAdIUS ELBOWS 1 8
3d ELBOWS 1 8
10 11
1/2"
Std
21,3
2,77
20,5 22,9
2,42
38 48
0,08
xs 3,73 3,26 0,10
160 4,75 4,16 0,12
xxs 7,47 6,54 0,15
3/4"
Std
26,7
2,87
25,9 28,3
2,51
29 43
0,09
xs 3,91 3,42 0,11
160 5,54 4,85 0,12
xxs 7,82 6,84 0,17
1"
Std
33,4
3,38
32,6 35
2,96
38 56
0,15
xs 4,55 3,98 0,20
160 6,35 5,56 0,26
xxs 9,09 7,95 0,33
1.1/4"Std
42,4 3,56
41,6 44 3,12
48 700,26
xs 4,85 4,24 0,34
1.1/2"
Std
48,3
3,68
47,5 49,9
3,22
57 83
0,37
xs 5,08 4,45 0,49
160 7,14 6,25 0,65
xxs 10,16 8,89 0,86
2"
Std
60,3
3,91
59,5 61,9
3,42
76 106
0,65
xs 5,54 4,85 0,90
160 8,71 7,62 1,33
xxs 11,07 9,69 1,61
2.1/2"
Std
73,1
5,16
72,3 74,7
4,52
95 132
1,29
xs 7,01 6,13 1,71
160 9,53 8,34 2,23
xxs 14,02 12,27 3,06
3"
20
88,9
3,96
87,3 90,5
3,47
114 159
1,50
Std 5,49 4,80 2,03
xs 7,62 6,67 2,74
160 11,13 9,74 3,83
xxs 15,24 13,34 4,97
3.1/2"Std
101,6 5,74
100 103,2 5,02
133 1842,85
xs 8,08 7,07 3,91
4"
20
114,3
4,37
112,7 115,9
3,82
152 210
2,92
Std 6,02 5,27 3,85
xs 8,56 7,49 5,35
120 11,13 9,74 6,78
160 13,49 11,80 8,03
xxs 17,12 14,98 9,82
O.D.
INCH
ES
D
O.D.
INCH
ES
D
WT
SCH.
WT
WT
SCH.
WT
O.D.
MM
D
O.D.
MM
D
WT M
M
WT
WT M
M
WT
MIN
O.D
. TOL
ERAN
CE
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLL
.
MIN
W.T.
TOLL
.
RADI
US M
M.
RM
RADI
US M
M.
RM
QUOT
E H
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
THEO
RETIC
AL W
EIgHT
90
kg.
SHORT RADIUS SEAMLESS ELBOWS
(RADIUS = 1)ASME B16.9
1" Std 33,40 3,38 32,60 35,00 2,96 25 41 0,10 1.1/4" Std 42,40 3,56 41,60 44,00 3,12 32 52 0,17 1.1/2" Std 48,30 3,68 47,50 49,90 3,22 38 62 0,24
2"Std
60,30 3,91
59,50 61,90 3,42
51 81 0,44
xs 5,54 4,85 0,60 160 8,71 7,62 0,89
2.1/2" Std 73,10 5,16 72,30 74,70 4,52 64 100 0,86
3"Std
88,90 5,49
90,50 87,30 4,80
76 121 1,35
xs 7,62 6,67 1,83 160 11,13 9,74 2,55
4"
Std
114,30
6,02
115,90 112,70
5,27
102 159
2,57 xs 8,56 7,49 3,56 120 11,13 9,74 4,54 160 13,49 11,80 5,37
5"Std
141,30 6,55
139,70 143,70 5,73
127 197 4,34
xs 9,53 8,34 6,17
6"
Std
168,30
7,11
166,70 170,70
6,22
152 237
6,77 xs 10,97 9,60 10,20 120 14,27 12,49 12,95 160 18,24 15,96 16,12
8"
20
219,10
6,35
217,50 221,50
5,56
203 313
10,60 30 7,04 6,16 11,70 Std 8,18 7,16 13,60 xs 12,70 11,11 20,60
10"
20
273,00
6,35
269,80 277,00
5,56
254 391
16,70 30 7,80 6,83 20,30 Std 9,27 8,11 24,10 xs 12,70 11,11 32,50
12"
20
323,90
6,35
320,70 327,90
5,56
305 467
23,80 30 8,38 7,33 31,20 Std 9,53 8,34 35,30 40 10,31 9,02 38,20 xs 12,70 11,11 46,70
14"
10
355,60
6,35
352,40 359,60
5,56
356 533
30,60 20 7,92 6,93 37,90 Std 9,53 8,34 45,40 xs 12,70 11,11 60,00
16"10
406,40 6,35
403,20 410,40 5,56
406 610 40,00
20 7,92 6,93 50,00 Std 9,53 8,34 59,50
24"10
609,60 6,35
606,40 613,60 5,56
610 914 90,50
Std 9,53 8,34 135,00 xs 12,70 11,11 179,00
LONg RADIUS SEAMLESS ELBOWS (RADIUS = 1.5)ASME B16.9
12 13
5"
Std
141,3
6,55
139,7 143,7
5,73
190 262
6,52
xs 9,53 8,34 9,26
120 12,70 11,11 12,00
160 15,88 13,90 14,70
xxs 19,05 16,67 17,20
6"
20
168,3
4,78
166,7 170,7
4,18
229 313
6,50
Std 7,11 6,22 10,20
xs 10,97 9,60 15,30
120 14,27 12,49 19,50
160 18,24 15,96 24,30
xxs 21,95 19,21 28,50
8"
20
219,1
6,35
217,5 221,5
5,56
305 414
16,00
30 7,04 6,16 17,60
Std 8,18 7,16 20,40
60 10,31 9,02 25,40
xs 12,70 11,11 30,90
100 ** 15,06 13,18 ** 43,30
120 18,24 15,96 43,30
140 ** 20,62 18,04 ** 53,30
xxs ** 22,23 19,45 ** 53,30
160 23,01 20,13 53,30
10"
20
273,0
6,35
269,8 277
5,56
381 518
24,99
30 7,80 6,83 30,53
Std 9,27 8,11 36,08
xs 12,70 11,11 48,79
80 15,06 13,18 57,44
100 ** 18,24 15,96 ** 79,60
120 21,41 18,73 79,60
140/xxs ** 25,40 22,23 ** 103,10
160 28,58 25,01 103,10
12"
20
323,9
6,35
320,7 327,9
5,56
457 619
35,70
30 8,38 7,33 46,80
Std 9,53 8,34 53,00
40 10,31 9,02 57,30
xs 12,70 11,11 70,00
60 14,27 12,49 78,20
80 17,45 15,27 94,80
100 ** 21,41 18,73 ** 134,00
120/xxs 25,40 22,23 134,00
140 ** 28,58 25,01 ** 171,00
160 33,32 29,16 171,00
14"
10
355,6
6,35
352,4 359,6
5,56
533 711
45,8020 7,92 6,93 56,90Std 9,53 8,34 68,1040 ** 11,13 9,74 ** 90,00xs 12,70 11,11 90,0080 19,05 16,67 132,00
100 ** 23,80 20,83 ** 187,91120 27,76 24,29 187,91140 ** 31,75 27,78 ** 235,86160 35,71 31,25 235,86
16"
10
406,4
** 6,35
403,2 410,4
5,56
610 813
74,5820 7,92 6,93 74,58Std 9,53 8,34 89,20xs 12,70 11,11 118,0060 16,66 14,58 153,0080 21,41 18,73 195,00
100 ** 26,19 22,92 274,51120 30,94 27,07 274,51140 ** 36,53 31,96 350,00160 40,46 35,40 350,00
18"
10
457,0
** 6,35
453,8 461
5,56
686 914
** 113,0020 ** 7,92 6,93 ** 113,00Std 9,53 8,34 113,0030 ** 11,13 9,74 ** 150,00xs 12,70 11,11 150,0040 14,27 12,49 168,0060 19,05 16,67 197,1580 23,80 20,83 243,63
20"
10
508,0
** 6,35
503,2 514,4
5,56
762 1016
** 140,00Std 9,53 8,34 140,00xs 12,70 11,11 186,0040 15,06 13,18 219,0060 ** 20,62 18,04 ** 372,0080 26,19 22,92 372,00
22"Std
558,8 9,53
554 565,2 8,34
838 1118170,00
xs 12,70 11,11 225,00
24"
10
609,6
** 6,35
604,8 616
5,56
914 1219
** 202,00Std 9,53 8,34 202,00xs 12,70 11,11 268,0030 ** 14,27 12,49 ** 366,0040 17,48 15,30 366,0060 24,59 21,52 634,0080 30,94 27,07 634,00
28"10
711,0
7,92
706,2 717,4
6,93
1067 1423
230,00Std 9,53 8,34 276,00
xs 12,70 11,11 366,00
30"Std
762,0 9,53
757,2 768,4 8,34
1143 1524317,00
xs 12,70 11,11 421,00
32"Std
812,8 9,53
808 819,2 8,34
1219 1625361,00
xs 12,70 11,11 472,00
LONg RADIUS SEAMLESS ELBOWS (RADIUS = 1.5)
LONg RADIUS SEAMLESS ELBOWS
(RADIUS = 1.5)ASME B16.9
** tapered from higher schedule ** tapered from higher schedule
O.D.
INCH
ES
D
O.D.
INCH
ES
D
WT
SCH.
D W
T
WT
SCH.
WT
O.D.
MM
D
O.D.
MM
D
WT M
M
WT
WT M
M
WT
MIN
O.D
. TOL
ERAN
CE
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLL
.
MIN
W.T.
TOLL
.
RADI
US M
M.
RM
RADI
US M
M.
RM
QUOT
E H
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
THEO
RETIC
AL W
EIgHT
90
kg.
14 15
1Std
33,4 3,38
32,6 35 2,96
72,5 890,28
xs 4,55 3,98 0,37
1.1/4Std
42,4 3,56
41,6 44 3,12
92,5 1140,50
xs 4,85 4,24 0,65
1.1/2Std
48,3 3,68
47,5 49,9 3,22
107,5 1320,68
xs 5,08 4,45 0,91
2Std
60,3 3,91
59,5 61,9 3,42
135 1651,15
xs 5,54 4,85 1,59
320
88,9 3,96
87,3 90,5 3,47
205 2502,67
Std 5,49 4,80 3,64
xs 7,62 6,67 4,92
3.1/2Std
101,6 5,74
100,0 103,2 5,02
237 2885,05
xs 8,08 7,07 6,94
420
114,3 4,37
112,7 115,9 3,82
270 3275,02
Std 6,02 5,27 6,82
xs 8,56 7,49 9,47
620
168,3 4,78
166,7 170,7 4,18
390 47411,81
Std 7,11 6,22 17,31
xs 10,97 9,60 26,07
820
219,1 6,35
217,5 221,5 5,56
510 61926,69
30 7,04 6,16 29,49
Std 8,18 7,16 34,09
60 10,31 9,02 42,53
xs 12,70 11,11 51,79
1020
273,0 6,35
269,8 277 5,56
650 78642,64
30 7,80 6,83 52,09
Std 9,27 8,11 61,56
xs 12,70 11,11 83,24
1220
323,9 6,35
320,7 327,9 5,56
775 93760,54
30 8,38 7,33 79,38
Std 9,53 8,34 89,94
40 10,31 9,02 97,06
xs 12,70 11,11 118,65
1410
355,6 6,35
352,4 359,6 5,56
850 102873,02
20 7,92 6,93 90,67
Std 9,53 8,34 108,60
40 11,13 9,74 126,24
xs 12,70 11,11 143,39
1610
406,4 6,35
403,2 410,4 5,56
970 117395,46
20 7,92 6,93 118,59
Std 9,53 8,34 142,12
xs 12,70 11,11 187,88
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
MM
D
WT M
M
WT
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLL
.
RADI
US M
M.
RM
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
R=2.5 D SEAMLESS
ELBOWS ASME B16.9
R=3DSEAMLESS ELBOWSASME B16.9
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
MM
D
WT M
M
WT
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLL
.
RADI
US M
M.
RM
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
2Std 60,3 3,91 59,5 61,9 3,42 152 182
1,30
xs 5,54 4,85 1,79
320
88,9
3,96
87,3 90,5
3,47 229 278
2,98
Std 5,49 4,80 4,06
xs 7,62 6,67 5,49
420
114,3
4,37
112,7 115,9
3,82 305 362
5,68
Std 6,02 5,27 7,70
xs 8,56 7,49 10,69
620
168,3
4,78
166,7 170,7
4,18 457 541
13,84
Std 7,11 6,22 20,29
xs 10,97 9,60 30,55
820
219,1
6,35
217,5 221,5
5,56 610 720
31,92
30 7,04 6,16 35,28
Std 8,18 7,16 40,77
60 10,31 9,02 50,87
xs 12,70 11,11 61,94
1020
273,0
6,35
269,8 277
5,56 762 898
49,98
30 7,80 6,83 61,06
Std 9,27 8,11 72,17
xs 12,70 11,11 97,58
1220
323,9
6,35
320,7 327,9
5,56 914 1078
71,40
30 8,38 7,33 93,62
Std 9,53 8,34 106,08
40 10,31 9,02 114,47
xs 12,70 11,11 139,94
1410
355,6
6,35
352,4 359,6
5,56 1067 1245
91,67
20 7,92 6,93 113,82
Std 9,53 8,34 136,32
40 11,13 9,74 158,47
xs 12,70 11,11 180,00
1610
406,4
6,35
403,2 410,4
5,56 1219 1422
119,96
20 7,92 6,93 149,03
Std 9,53 8,34 178,60
xs 12,70 11,11 236,11
16 17
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
MM
D
WT M
M
WT
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLL
.
RADI
US M
M.
RM
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
R=5D SEAMLESS
ELBOWS ASME B16.9
2 Std60,3
3,91 59,5 61,9
3,42 254 284
2,17
xs 5,54 4,85 2,99
320
88,9 3,96
87,3 90,5 3,47
381 4264,96
Std 5,49 4,80 6,76
xs 7,62 6,67 9,14
420
114,3 4,37
112,7 115,9 3,82
508 5659,45
Std 6,02 5,27 12,83
xs 8,56 7,49 17,81
620
168,3 4,78
166,7 170,7 4,18
762 84623,07
Std 7,11 6,22 33,83
xs 10,97 9,60 50,95
8
20
219,1
6,35
217,5 221,5
5,56
1016 1126
53,17
30 7,04 6,16 58,76
Std 8,18 7,16 67,91
60 10,31 9,02 84,72
xs 12,70 11,11 103,17
10
20
273,0
6,35
269,8 277
5,56
1270 1407
83,30
30 7,80 6,83 101,77
Std 9,27 8,11 120,28
xs 12,70 11,11 162,64
12
20
323,9
6,35
320,7 327,9
5,56
1524 1686
119,04
30 8,38 7,33 156,10
Std 9,53 8,34 176,87
40 10,31 9,02 190,87
xs 12,70 11,11 233,33
14
10
355,6
6,35
352,4 359,6
5,56
1778 1956
152,75
20 7,92 6,93 189,66
Std 9,53 8,34 227,16
40 11,13 9,74 264,07
xs 12,70 11,11 299,95
16
10 406,4 6,35 403,2 410,4 5,56 2032 2235 199,96
20 7,92 6,93 248,42
Std 9,53 8,34 297,72
xs 12,70 11,11 393,58
SEAMLESS CONCENTRIC REDUCERSASME B16.9
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
(1) M
M
D1
O.D.
(2) M
M
WT
W.T.
(1) M
M
WT1
W.T.
(2) M
M
WT1
HEIg
HT M
M.
H
THEO
RETIC
AL
WEIg
HT 90
kg
.
1" x 3/4"Std
33,40 26,70 3,38 2,87
51 0,14
xs 4,55 3,91 0,17
1.1/4" x 3/4"Std
42,40 26,70 3,56 2,87
51
0,20
xs 4,85 3,91 0,23
1.1/4" x 1"Std
42,40 33,40 3,56 3,38 0,20
xs 4,85 4,55 0,24
1.1/2" x 3/4"Std
48,30 26,70 3,68 2,87
64
0,22
xs 5,08 3,91 0,30
1.1/2" x 1"Std
48,30 33,40 3,68 3,38 0,24
xs 5,08 4,55 0,31
1.1/2" x 1.1/4"Std
48,30 42,40 3,68 3,56 0,26
xs 5,08 4,85 0,33
2" x 1"Std
60,30 33,40 3,91 3,38
76
0,37
xs 5,54 4,55 0,45
2" x 1.1/4"Std
60,30 42,40 3,91 3,56 0,39
xs 5,54 4,85 0,53
2 "x 1.1/2"Std
60,30 48,30 3,91 3,68 0,41
xs 5,54 5,08 0,54
2.1/2" x 1.1/2"Std
73,10 48,30 5,16 3,68
89
0,68
xs 7,01 5,08 0,86
2.1/2" x 2"Std
73,10 60,30 5,16 3,91 0,73
xs 7,01 5,54 0,94
3" x 1.1/2"Std
88,90 48,30 5,49 3,68
89
0,86
xs 7,62 5,08 0,99
3" x 2"Std
88,90 60,30 5,49 3,91 0,91
xs 7,62 5,54 1,18
3" x 2.1/2"Std
88,90 73,10 5,49 5,16 0,98
xs 7,62 7,01 1,29
4" x 2"Std
114,30 60,30 6,02 3,91
102
1,44
xs 8,56 5,54 1,78
4" x 2.1/2"Std
114,30 73,10 6,02 5,16 1,52
xs 8,56 7,01 1,90
4" x 3"Std
114,30 88,90 6,02 5,49 1,59
xs 8,56 7,62 2,13
5" x 3"Std
141,30 88,90 6,55 5,49
127
2,60
xs 9,53 7,62 3,55
5" x 4"Std
141,30 114,30 6,55 6,02 2,72
xs 9,53 8,56 3,78
6" x 3"Std
168,30 88,90 7,11 5,49
140
3,63
xs 10,97 7,62 5,04
6" x 4"Std
168,30 114,30 7,11 6,02 3,72
xs 10,97 8,56 5,45
6" x 5"Std
168,30 141,30 7,11 6,55 3,93
xs 10,97 9,53 5,72
18 19
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
(1) M
M
D1
O.D.
(2) M
M
D2
W.T.
(1) M
M
WT1
W.T.
(2) M
M
WT2
HEIg
HT M
M.
H
THEO
RETIC
AL
WEIg
HT 90
kg
.
SEAMLESS CONCENTRIC
REDUCERSASME B16.9
8" x 4"Std
219,10 114,30 8,18 6,02
152
5,95
xs 12,70 8,56 8,44
8" x 5"Std
219,10 141,30 8,18 6,55 6,08
xs 12,70 9,53 8,88
8" x 6"Std
219,10 168,30 8,18 7,11 6,31
xs 12,70 10,97 9,26
10" x 6"Std
273,00 168,30 9,27 7,11
178
10,10
xs 12,70 10,97 13,50
10" x 8"Std
273,00 219,10 9,27 8,18 10,50
xs 12,70 12,70 14,20
12" x 8"Std
323,90 219,10 9,53 8,18
203
14,60
xs 12,70 12,70 17,00
12" x 10"Std
323,90 273,00 9,53 9,27 15,20
xs 12,70 12,70 19,80
14" x 10"Std
355,60 273,00 9,53 9,27
330
27,40
xs 12,70 12,70 36,10
14" x 12"Std
355,60 323,90 9,53 9,53 28,80
xs 12,70 12,70 37,70
16" x 10"Std
406,40 273,00 9,53 9,27
356
33,10
xs 12,70 12,70 43,70
16" x 12"Std
406,40 323,90 9,53 9,53 34,30
xs 12,70 12,70 45,00
16" x 14"Std
406,40 355,60 9,53 9,53 35,20
xs 12,70 12,70 46,30
18" x 12"Std
457,00 323,90 9,53 9,53
381
40,50 xs 12,70 12,70 53,60
18" x 14"Std
457,00 355,60 9,53 9,53 41,30
xs 12,70 12,70 54,50
18" x 16"Std
457,00 406,40 9,53 9,53 42,70
xs 12,70 12,70 55,80
20" x 12"Std
508,00 323,90 9,53 9,53
508
60,80 xs 12,70 12,70 79,90
20" x 14"Std
508,00 355,60 9,53 9,53 61,30
xs 12,70 12,70 81,30
20" x 16"Std
508,00 406,40 9,53 9,53 62,60
xs 12,70 12,70 82,60
20" x 18"Std
508,00 457,00 9,53 9,53 64,50
xs 12,70 12,70 84,40
24" x 14"Std
609,60 355,60 9,53 9,53
508
72,60 xs 12,70 12,70 95,80
24" x 16"Std
609,60 406,40 9,53 9,53 72,60
xs 12,70 12,70 95,80
24" x 18"Std
609,60 457,00 9,53 9,53 74,00
xs 12,70 12,70 97,60
24" x 20"Std
609,60 508,00 9,53 9,53 75,80
xs 12,70 12,70 99,90
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
(1) M
M D
1
O.D.
(2) M
M D
2
W.T.
(1) M
M W
T1
W.T.
(2) M
M W
T2
HEIg
HT M
M.
H
1" x 3/4"Std
33,40 26,70 3,38 2,87
51 0,14
xs 4,55 3,91 0,17
1.1/4" x 3/4"Std
42,40 26,70 3,56 2,87
51
0,20 xs 4,85 3,91 0,23
1.1/4" x 1"Std
42,40 33,40 3,56 3,38 0,20
xs 4,85 4,55 0,24
1.1/2" x 3/4"Std
48,30 26,70 3,68 2,87
64
0,22 xs 5,08 3,91 0,30
1.1/2" x 1"Std
48,30 33,40 3,68 3,38 0,24
xs 5,08 4,55 0,31
1.1/2" x 1.1/4"Std
48,30 42,40 3,68 3,56 0,26
xs 5,08 4,85 0,33
2" x 1"Std
60,30 33,40 3,91 3,38
76
0,37 xs 5,54 4,55 0,45
2" x 1.1/4"Std
60,30 42,40 3,91 3,56 0,39
xs 5,54 4,85 0,53
2 "x 1.1/2"Std
60,30 48,30 3,91 3,68 0,41
xs 5,54 5,08 0,54
2.1/2" x 1.1/4"Std
73,10 42,40 5,16 3,56 0,39
xs 7,01 4,85 0,53
2.1/2" x 1.1/2"Std
73,10 48,30 5,16 3,68
89
0,68 xs 7,01 5,08 0,86
2.1/2" x 2"Std
73,10 60,30 5,16 3,91 0,73
xs 7,01 5,54 0,94
3" x 1"Std
88,90 33,40 5,49 3,38
89
0,86 xs 7,62 4,55 0,99
3" x 1.1/2"Std
88,90 48,30 5,49 3,68 0,86
xs 7,62 5,08 0,99
3" x 2"Std
88,90 60,30 5,49 3,91 0,91
xs 7,62 5,54 1,18
3" x 2.1/2"Std
88,90 73,10 5,49 5,16 0,98
xs 7,62 7,01 1,29
4" x 2"Std
114,30 60,30 6,02 3,91
102
1,44 xs 8,56 5,54 1,78
4" x 2.1/2"Std
114,30 73,10 6,02 5,16 1,52
xs 8,56 7,01 1,90
4" x 3"Std
114,30 88,90 6,02 5,49 1,59
xs 8,56 7,62 2,13
5" x 3"Std
141,30 88,90 6,55 5,49
127
2,60 xs 9,53 7,62 3,55
5" x 4"Std
141,30 114,30 6,55 6,02 2,72
xs 9,53 8,56 3,78
6" x 3"Std
168,30 88,90 7,11 5,49
140
3,63 xs 10,97 7,62 5,04
6" x 4"Std
168,30 114,30 7,11 6,02 3,72
xs 10,97 8,56 5,45
6" x 5"Std
168,30 141,30 7,11 6,55 3,93
xs 10,97 9,53 5,72
SEAMLESS ECCENTRIC REDUCERSASME B16.9
THEO
RETIC
AL
WEIg
HT k
g.
20 21
8" x 4"Std
219,10 114,30 8,18 6,02
152
5,95 xs 12,70 8,56 8,44
8" x 5"Std
219,10 141,30 8,18 6,55 6,08
xs 12,70 9,53 8,88
8" x 6"Std
219,10 168,30 8,18 7,11 6,31
xs 12,70 10,97 9,26
10" x 5"Std
273,00 141,30 9,27 6,55
178
9,90 xs 12,70 9,53 13,00
10" x 6"Std
273,00 168,30 9,27 7,11 10,10
xs 12,70 10,97 13,50
10" x 8"Std
273,00 219,10 9,27 8,18 10,50
xs 12,70 12,70 14,20
12" x 6"Std
323,90 168,30 9,53 7,11
203
14,10 xs 12,70 10,97 18,40
12" x 8"Std
323,90 219,10 9,53 8,18 14,60
xs 12,70 12,70 17,00
12" x 10"Std
323,90 273,00 9,53 9,27 15,20
xs 12,70 12,70 19,80
14" x 8"Std
355,60 219,10 9,53 8,18
330
26,00 xs 12,70 12,70 34,90
14" x 10"Std
355,60 273,00 9,53 9,27 27,40
xs 12,70 12,70 36,10
14" x 12"Std
355,60 323,90 9,53 9,53 28,80
xs 12,70 12,70 37,70
16" x 10"Std
406,40 273,00 9,53 9,27
356
33,10 xs 12,70 12,70 43,70
16" x 12"Std
406,40 323,90 9,53 9,53 34,30
xs 12,70 12,70 45,00
16" x 14"Std
406,40 355,60 9,53 9,53 35,20
xs 12,70 12,70 46,30
18" x 12"Std
457,00 323,90 9,53 9,53
381
40,50 xs 12,70 12,70 53,60
18" x 14"Std
457,00 355,60 9,53 9,53 41,30
xs 12,70 12,70 54,50
18" x 16"Std
457,00 406,40 9,53 9,53 42,70
xs 12,70 12,70 55,80
20" x 12"Std
508,00 323,90 9,53 9,53
508
60,80 xs 12,70 12,70 79,90
20" x 14"Std
508,00 355,60 9,53 9,53 61,30
xs 12,70 12,70 81,30
20" x 16"Std
508,00 406,40 9,53 9,53 62,60
xs 12,70 12,70 82,60
20" x 18"Std
508,00 457,00 9,53 9,53 64,50
xs 12,70 12,70 84,40
24" x 14"Std
609,60 355,60 9,53 9,53
508
72,60 xs 12,70 12,70 95,80
24" x 16"Std
609,60 406,40 9,53 9,53 72,60
xs 12,70 12,70 95,80
24" x 18"Std
609,60 457,00 9,53 9,53 74,00
xs 12,70 12,70 97,60
24" x 20"Std
609,60 508,00 9,53 9,53 75,80
xs 12,70 12,70 99,90
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
(1) M
M D
1
O.D.
(2) M
M D
2
W.T.
(1) M
M W
T1
W.T.
(2) M
M W
T2
HEIg
HT M
M.
H
THEO
RETIC
AL
WEIg
HT k
g.
SEAMLESS ECCENTRIC REDUCERSASME B16.9
SEAMLESS EQUAL TEESASME B16.9
1/2" Std 21,30 2,77 20,50 22,90 2,42 25 50 0,12 xs 3,73 3,26 0,13
3/4" Std 26,70 2,87 25,90 28,30 2,51 29 58 0,16 xs 3,91 3,42 0,20
1"Std
33,40 3,38
32,60 35,00 2,96
38 76 0,30
xs 4,55 3,98 0,38
160 6,35 5,56 0,42
1.1/4"Std
42,40 3,56
41,60 44,00 3,12
48 96 0,54
xs 4,85 4,24 0,71
160 6,35 5,56 0,90
1.1/2"Std
48,30 3,68
47,50 49,90 3,22
57 114 0,75
xs 5,08 4,45 1,02
160 7,14 6,25 1,61
2"Std
60,30 3,91
59,50 61,90 3,42
64 128 1,07
xs 5,54 4,85 1,44
160 8,74 7,65 2,27
2.1/2"Std
73,10 5,16
72,30 74,70 4,52
76 152 2,07
xs 7,01 6,13 2,78
160 9,53 8,34 3,63
3"Std
88,90 5,49
87,30 90,50 4,80
86 172 3,05
xs 7,62 6,67 3,75
160 11,13 9,74 6,19
4"
Std
114,30
6,02
112,70 115,90
5,27
105 210
5,02
xs 8,56 7,49 6,67
120 11,13 9,74 8,10
160 13,49 11,80 11,80
5"
Std
141,30
6,55
139,70 143,70
5,73
124 248
7,72
xs 9,53 8,34 10,51
120 12,70 11,11 15,75
160 15,88 13,90 19,90
6"
Std
168,30
7,11
166,70 170,70
6,22
143 186
11,51
xs 10,97 9,60 17,21
120 14,27 12,49 21,60
160 18,24 15,96 31,10
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
MM
D
W.T.
MM
W
T
MIN
O.D
. TO
LERA
NCE
MAX
O.D
. TO
LERA
NCE
MIN
W.T.
TOLL
.
C MM
C+C M
M
THEO
RETIC
AL
WEIg
HT k
g.
22 23
8"
20
219,10
6,35
217,50 221,50
5,56
178 356
20,70
30 7,04 6,16 22,14
Std 8,18 7,16 20,45
xs 12,70 11,11 29,48
120 18,24 15,96 44,55
160 23,01 20,13 63,50
10"
20
273,00
6,35
269,80 277,00
5,56
216 432
31,23
30 7,80 6,83 36,00
Std 9,27 8,11 33,86
xs 12,70 11,11 44,15
80 15,09 13,20 60,75
120 21,41 18,73 83,70
160 28,58 25,01 118,00
12"
20
323,90
6,35
320,70 327,90
5,56
254 508
39,06
30 8,38 7,33 50,94
Std 9,53 8,34 45,00
40 10,31 9,02 63,45
xs 12,70 11,11 78,70
60 14,27 12,49 85,50
80 17,48 15,30 103,50
120 25,40 22,23 135,00
160 33,32 29,16 155,00
14"20
355,60 7,92
352,40 359,60 6,93
279 558 75,60
Std 9,53 8,34 72,60
xs 12,70 11,11 96,70
16"20
406,40 7,92
403,20 410,40 6,93
305 610 90,00
Std 9,53 8,34 90,30
xs 12,70 11,11 120,00
18" Std 457,00 9,53 453,80 461,00 8,34 343 686 131,00 xs 12,70 11,11 139,00
20" Std 508,00 9,53 503,20 514,40 8,34 381 762 151,20 xs 12,70 11,11 220,50
24" Std 609,60 9,53 604,80 616,00 8,34 432 864 216,00 xs 12,70 11,11 315,00
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
MM
D
W.T.
MM
W
T
MIN
O.D
. TO
LERA
NCE
MAX
O.D
. TO
LERA
NCE
MIN
W.T.
TOLL
.
C MM
C+C M
M
THEO
RETIC
AL
WEIg
HT k
g.
SEAMLESS EQUAL
TEESASME B16.9
SEAMLESS REDUCINg TEESASME B16.9
3/4" x 1/2" Std
26,70 21,30 2,87 2,77
29 58 0,16
xs 3,91 3,73 0,20
1" x 1/2" Std
33,40 21,30 3,38 2,77
38 76
0,30
xs 4,55 3,73 0,37
1" x 3/4" Std
33,40 26,70 3,38 2,87 0,30
xs 4,55 3,91 0,38
1.1/4" x 1/2" Std
42,40 21,30 3,56 2,77
48 96
0,54
xs 4,85 3,73 0,68
1.1/4" x 3/4" Std
42,40 26,70 3,56 2,87 0,54
xs 4,85 3,38 0,68
1.1/4" x 1" Std
42,40 33,40 3,56 2,87 0,54
xs 4,85 3,38 0,69
1.1/2" x 3/4" Std
48,30 26,70 3,68 2,87
57 114
0,77
xs 5,08 3,91 0,98
1.1/2" x 1" Std
48,30 33,40 3,68 3,38 0,77
xs 5,08 4,55 1,02
1.1/2" x 1.1/4" Std
48,30 42,40 3,68 3,56 0,77
xs 5,08 4,85 1,02
2" x 1" Std
60,30 33,40 3,91 3,38
64
51 0,98
xs 5,54 4,55 1,32
2" x 1.1/4" Std
60,30 42,40 3,91 3,56
57 1,04
xs 5,54 4,85 1,44
2" x 1.1/2" Std
60,30 48,30 3,91 3,68
60 1,06
xs 5,54 5,08 1,44
2.1/2" x 1.1/4" Std
73,10 42,40 5,16 3,56
76
64 1,72
xs 7,01 4,85 2,14
2.1/2" x 1.1/2" Std
73,10 48,30 5,16 3,68
67 1,72
xs 7,01 5,08 2,14
2.1/2" x 2" Std
73,10 60,30 5,16 3,91
70 1,72
xs 7,01 5,54 2,24
3" x 1" Std
88,90 33,40 5,49 3,38
86
70 2,45
xs 7,62 4,55 2,80
3" x 1.1/4" Std
88,90 42,40 5,49 3,56
70 2,45
xs 7,62 4,85 2,80
3" x 1.1/2" Std
88,90 48,30 5,49 3,68
73 2,45
xs 7,62 5,08 3,05
3" x 2" Std
88,90 60,30 5,49 3,91
76 2,48
xs 7,62 5,54 3,09
3" x 2.1/2" Std
88,90 73,10 5,49 5,16
83 2,91
xs 7,62 7,01 3,50
4" x 2" Std
114,30 60,30 6,02 3,91
105
89 4,12
xs 8,56 5,54 5,08
4" x 2.1/2" Std
114,30 73,10 6,02 5,16
95 4,48
xs 8,56 7,01 5,96
4" x 3" Std
114,30 88,90 6,02 5,49
98 4,56
xs 8,56 7,62 6,13
5" x 3" Std
141,30 88,90 6,55 5,49
124 111
7,60xs 9,53 7,62 8,85
5" x 4" Std
141,30 114,30 6,55 6,02
117 7,10
xs 9,53 8,56 9,90
6" x 3" Std
168,30 88,90 7,11 5,49
143
124 10,22
xs 10,97 7,62 13,33
6" x 4" Std
168,30 114,30 7,11 6,02
130 10,25
xs 10,97 8,56 14,26
6" x 5" Std
168,30 141,30 7,11 6,55
137 11,13
xs 10,97 9,53 15,04
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
(1) M
M D
1
O.D.
(2) M
M D
2
W.T.
(1) M
M W
T1
W.T.
(2) M
M W
T2
C MM
.
C+C M
M.
THEO
RETIC
AL
WEIg
HT k
g.
24 25
8" x 4" Std
219,10 114,30 8,18 6,02
178
156 16,77
xs 12,70 8,56 24,59
8" x 5" Std
219,10 141,30 8,18 6,55
162 17,36
xs 12,70 9,53 24,59
8" x 6" Std
219,10 168,30 8,18 7,11
168 17,96
xs 12,70 10,97 28,27
10" x 4" Std
273,00 114,30 9,27 6,02
216
184 26,93
xs 12,70 8,56 35,11
10" x 6" Std
273,00 168,30 9,27 7,11
194 26,93
xs 12,70 10,97 35,11
10" x 8" Std
273,00 219,10 9,27 8,18
203 28,35
xs 12,70 12,70 36,97
12" x 6" Std
323,90 168,30 9,53 7,11
254
219 40,50
xs 12,70 10,97 75,20
12" x 8" Std
323,90 219,10 9,53 8,18
229 40,50
xs 12,70 12,70 75,20
12"x 10" Std
323,90 273,00 9,53 9,27
241 43,00
xs 12,70 12,70 75,20
14" x 10" Std
355,60 273,00 9,53 9,27
279
257 87,84
xs 12,70 12,70 98,60
14" x 12" Std
355,60 323,90 9,53 9,53
270 91,80
xs 12,70 12,70 103,50
16" x 10" Std
406,40 273,00 9,53 9,27
305
283 95,85
xs 12,70 12,70 144,00
16" x 12" Std
406,40 323,90 9,53 9,53
295 99,00
xs 12,70 12,70 147,60
16" x 14" Std
406,40 355,60 9,53 9,53
305 99,00
xs 12,70 12,70 150,30
18" x 10" Std
457,00 273,00 9,53 9,27
343
308 116,10
xs 12,70 12,70 138,60
18" x 12" Std
457,00 323,90 9,53 9,53
321 121,50
xs 12,70 12,70 147,60
18" x 14" Std
457,00 355,60 9,53 9,53
330 121,50
xs 12,70 12,70 171,00
18" x 16" Std
457,00 406,40 9,53 9,53
330 121,50
xs 12,70 12,70 171,00
20" x 10" Std
508,00 273,00 9,53 9,27
381
333 147,15
xs 12,70 12,70 192,60
20" x 12" Std
508,00 323,90 9,53 9,53
346 147,15
xs 12,70 12,70 192,60
20" x 14" Std
508,00 355,60 9,53 9,53
356 147,15
xs 12,70 12,70 192,60
20" x 16" Std
508,00 406,40 9,53 9,53
356 151,20
xs 12,70 12,70 196,20
20" x 18" Std
508,00 457,00 9,53 9,53
368 151,20
xs 12,70 12,70 196,20
24" x 12" Std
609,60 323,90 9,53 9,53
432
397 155,25
xs 12,70 12,70 220,50
24" x 16" Std
609,60 406,40 9,53 9,53
406 188,10
xs 12,70 12,70 234,00
24" x 18" Std
609,60 457,00 9,53 9,53
419 188,10
xs 12,70 12,70 234,00
24" x 20" Std
609,60 508,00 9,53 9,53
432 198,00
xs 12,70 12,70 252,00
SEAMLESS REDUCINg TEES
ASME B16.9O.
D. IN
CHES
D
WT
SCH.
WT
O.D.
(1) M
M D
1
O.D.
(2) M
M D
2
W.T.
(1) M
M W
T1
W.T.
(2) M
M W
T2
C MM
.
C+C M
M.
THEO
RETIC
AL
WEIg
HT k
g.
CAPSASME B16.9
1"Std
33,4
3,38
32,6 35,0
2,96 0,10
xs 4,55 3,98 0,13
160 6,35 5,56 0,15
1.1/4"Std
42,4
3,56
41,6 44,0
3,12 0,14
xs 4,85 4,24 0,19
160 6,35 5,56 0,23
1.1/2"Std
48,3
3,68
47,5 49,9
3,22 0,20
xs 5,08 4,45 0,23
160 7,14 6,25 0,30
2"Std
60,3
3,91
59,5 61,9
3,42 0,25
xs 5,54 4,85 0,30
160 8,74 7,65 0,55
2.1/2"Std
73,1
5,16
72,3 74,7
4,52 0,35
xs 7,01 6,13 0,45
160 9,53 8,34 0,90
3"Std
88,9
5,49
87,3 90,5
4,80 0,70
xs 7,62 6,67 0,85
160 11,13 9,74 1,45
4"
Std
114,3
6,02
112,7 115,9
5,27 1,10
xs 8,56 7,49 1,60
120 11,13 9,74 2,50
160 13,49 11,80 2,75
5"
Std
141,3
6,55
139,7 143,7
5,73 2,00
xs 9,53 8,34 2,70
120 12,70 11,11 4,00
160 15,88 13,90 5,00
6"
20
168,3
4,78
166,7 170,7
4,18 2,01
Std 7,11 6,22 3,00
xs 10,97 9,60 4,40
120 14,27 12,49 6,00
160 18,24 15,96 7,50
8"
20
219,1
6,35
217,5 221,5
5,56 4,50
30 7,04 6,16 5,00
Std 8,18 7,16 5,50
60 10,31 9,02 7,00
xs 12,70 11,11 8,35
120 18,24 15,96 12,27
160 23,01 20,13 19,49
10"
20
273,0
6,35
269,8 277,0
5,56 6,00
30 7,80 6,83 8,00
Std 9,27 8,11 9,00
xs 12,70 11,11 13,60
80 15,06 13,18 16,25
120 21,41 18,73 24,74
160 28,58 25,01 32,98
O.D.
INCH
ES
D
WT
SCH.
WT
O.D.
MM
D
W.T.
MM
W
T
MIN
O.D
. TO
LERA
NCE
MAX
O.D
. TO
LERA
NCE
MIN
W.T.
TOLL
.
THEO
RETIC
AL
WEIg
HT k
g.
26 27
12"
20
323,9
6,35
320,7 327,9
5,56 10,00 30 8,38 7,33 13,00 Std 9,53 8,34 15,00 40 10,31 9,02 19,00 xs 12,70 11,11 22,50 60 14,27 12,49 25,50 80 17,45 15,27 29,50
120 25,40 22,23 41,00 160 33,32 29,16 53,77
14"20
355,6 7,92
352,4 359,6 6,93 14,00
Std 9,53 8,34 16,00 xs 12,70 11,11 27,00
16"20
406,4 7,92
403,2 410,4 6,93 18,00
Std 9,53 8,34 21,00 xs 12,70 11,11 31,50
18"20
457,0 7,92
453,8 461,0 6,93 22,00
Std 9,53 8,34 26,00 xs 12,70 11,11 36,00
20"Std
508,0 9,53
503,2 514,4 8,34 32,00
xs 12,70 11,11 42,00
24"Std
609,6 9,53
604,8 616,0 8,34 46,00
xs 12,70 11,11 60,00
O.D.
INCH
ES
D
REfERENCE LIST AvAILABLE AT www.cenafittings.com
WT
SCH.
WT
O.D.
MM
D
W.T.
MM
W
T
MIN
O.D
. TO
LERA
NCE
MAX
O.D
. TO
LERA
NCE
MIN
W.T.
TOLL
.
THEO
RETIC
AL
WEIg
HT k
g.
CAPSASME B16.9
BUTTWELDINg ENDS
ASME B16.25
CERTIfICATION
From 0.12(3mm) to 0.88(22mm) Fig 2.a
Greater than 0.88(22mm) Fig 3.a
From 0.38(10mm) to 1(25mm) Fig 5.a
WAL
L THI
CkNE
SSIN
CHES
/ (M
M)
DESIg
NATIO
N
DETA
ILS
PRESSURE EQUIPMENT
DIRECTIvE (PED) 97/23/EC
the European Pressure Equipment directive 97/23/CE fixes the re-quirements for security of the pressure equipment. the producer of wrought butt welded fittings must operate with a quality Mana-gement System according to ISO-9001:2000. Such system must be certified based on the specific evaluation of the materials produced by a competent operating organism in the European Community.
VIRGILIO CENA & FIGLI S.p.a. has achieved the following certifi-cation:
LLOYDs Register n LRC 0160142/qMS dated december 26, 2009 approval certification according to ISO 9001:2008 with the specific note that the quality System satisfies the requirements in-dicated in Annex I Sect. 4.3 of the European directive 97/23/EC.
TV n 24/2002/MUC dated April 27, 2009 approval certifica-tion specifying that the quality System is in accordance with the Pressure Equipment directive 97/23/EC Annex I, Par 4.3 (PEd).
VIRGILIO CENA & FIGLI S.p.a. can supply product and documenta-tion conformed to the PEd, according to EN 10253-2. these condi-tions are nonetheless open to technical and commercial discussions to be defined by the parties officially in the purchase order.
29
euroPeanstandard MAtERIAL RANGE PROdUCt RANGE
SEAMLESS ELBOWS
MOdEL 2S (RAdIUS 1)
MOdEL 3S (RAdIUS 1.5)
MOdEL 5S (RAdIUS 2.5)
MOdEL 10S (RAdIUS 5)
WELdEd ELBOWS
SEAMLESS CONCENtRIC REdUCERS
SEAMLESS EqUAL ANd REdUCING tEES
dIShEd ENdS
ENd FINIShING
PRESSURE EqUIPMENt dIRECtIVE (PEd)
CERtIFICAtIONS
PRESSURE FACtOR OF ELBOWS tyPE A
WALL thICkNESS ON thE INtRAdOS OF ELBOWS tyPE B
StEEL GRAdES FOR PIPES MOStLy USEd By CENA tO PROdUCE SEAMLESS ELBOWS
GENERAL SALES CONdItIONS
30
31
32
33
37
38
39
40
41
42
42
43
43
44
46
49
50
EN 10253.2
30 31
MOdEL 2 ELBOWS 1 24
MOdEL 3 ELBOWS 1 28
MOdEL 5,10 ELBOWS 1 16
MOdEL 2 ELBOWS 1 8
MOdEL 3 ELBOWS 1 8
MOdEL 5,10 ELBOWS 1 8
EN 10253.2PRODUCTION RANgESUMMERY
WALL THICkNESS
OUTS
IDE
DIAM
ETER 813,00
762,00711,20660,40609,60558,80508,00457,20406,40355,60323,85273,05219,08168,28141,30114,30101,6088,9073,0360,3348,2642,1633,4026,6721,34
5 10 15 20 25 30 35
P235Gh P265Gh 16MO3 10CRMO5-5
13CRMO45 10CRMO9-10 x11CRMO5
P355N P355NL1 P265NL L290NB
L360NB L360qB L415NB L415qB L450qB
St35.8/I St35.8/III St37.0 St37.4
16MO3 13CRMO44
x11CRMO9-1 x10CRMOVNB9-1
MATERIALEN 10253.2
DIN 2609
EN 10253.2
Concentric Reducers33.7 x 26.9 (Wt 2.6 x 2.3)
406.4 x 323.90(Wt 8.8 x 7.1)
Equal Tee21.30 (Wt 2.00)
355.6 (Wt 8.0)
Reduced Tee26.9 x 21.30 (Wt 2.3 x 2.0)
355.60 x 323.90(Wt 8.0 x 71)
Caps33.7 (Wt 2.6)
406.4 (Wt 8.8)
fROM TO
MORE ExtENSIVE RANGE UPON REqUESt
EU fITTINg RANgE
EU ELBOW RANgE
32 33
R=1 DSEAMLESS
ELBOWS
R=1,5 DSEAMLESSELBOWS
EN-10253-2 EN-10253-2
3 17,00 2,00 16,50 17,50 1,75 2,40 20,0 29,0 0,02 3
21,30
2,00
20,80 21,80
1,75 2,40
28,00 39,00
0,04 3 2,90 2,54 3,48 0,06 3 3,20 2,80 3,84 0,06 3 3,60 3,15 4,32 0,07 3 4,00 3,50 4,80 0,08 3
26,90
2,30
26,40 27,40
2,01 2,76
28,5 42,0
0,06 3 2,90 2,54 3,48 0,08 3 3,20 2,80 3,84 0,09 3 3,60 3,15 4,32 0,10 3 4,00 3,50 4,80 0,10 3 30,00 2,60 29,50 30,50 2,28 3,12 33,50 48,00 0,09 3 2,90 2,54 3,48 0,10 3
31,80
2,60
31,30 32,30
2,28 3,12
35,00 51,00
0,11 3 2,90 2,54 3,48 0,12 3 3,20 2,80 3,84 0,13 3 3,60 3,15 4,32 0,14 3 4,00 3,50 4,80 0,15 3
33,70
2,30
33,20 34,20
2,01 2,76
38,00 55,00
0,11 3 2,60 2,28 3,12 0,12 3 3,20 2,80 3,84 0,15 3 3,60 3,15 4,32 0,16 3 4,00 3,50 4,80 0,18 3 4,50 3,94 5,40 0,20 3 5,00 4,38 6,00 0,21 3 6,30 5,51 7,56 0,26 3 38,00 2,60 37,50 38,50 2,28 3,12 45,00 64,00 0,16 3 2,90 2,54 3,48 0,18 3
42,40
2,60
41,90 42,90
2,28 3,12
48,00 69,00
0,19 3 3,20 2,80 3,84 0,23 3 3,60 3,15 4,32 0,26 3 4,00 3,50 4,80 0,29 3 4,50 3,94 5,40 0,32 3 5,00 4,38 6,00 0,35 3 44,50 2,60 44,00 45,00 2,28 3,12 51,00 73,00 0,22 3 2,90 2,54 3,48 0,24 3
48,30
2,60
47,80 48,80
2,28 3,12
57,00 81,00
0,26 3 3,20 2,80 3,84 0,32 3 3,60 3,15 4,32 0,36 3 4,00 3,50 4,80 0,39 3 4,50 3,94 5,40 0,44 3 5,00 4,38 6,00 0,48 3 6,30 5,51 7,56 0,59 3 51,00 2,60 50,49 51,51 2,28 3,12 63,50 88,00 0,31 3 2,90 2,54 3,48 0,35 3 54,00 2,60 53,46 54,54 2,28 3,12 72,50 100,00 0,38
2 26,90 2,30 26,40 27,40 2,01 2,76 25,0 39,0 0,06
2 33,70 2,30 33,20 34,20 2,01 2,76 25,0 42,0 0,08
2 2,60 2,28 3,12 0,10
2 42,40 2,60 41,90 42,90 2,28 3,12 32,0 53,0 0,15
2 48,30 2,60 47,80 48,80 2,28 3,12 38,0 62,0 0,18
2 60,30 2,90 59,70 60,90 2,54 3,48 51,0 81,0 0,36
2 76,10 2,90 75,34 76,86 2,54 3,48 63,0 102,0 0,50
2 88,90 3,20 88,01 89,79 2,80 3,84 76,0 121,0 0,88
2 114,30 3,60 113,16 115,44 3,15 4,32 102,0 159,0 1,62
2 6,30 5,51 7,56 2,77
2 133,00 4,00 131,67 134,33 3,50 4,80 125,0 192,0 2,50
2 139,70 4,00 138,30 141,10 3,50 4,80 127,0 197,0 2,79
2 168,30 4,50 166,62 169,98 3,94 5,40 152,0 237,0 4,43
2 7,10 6,21 8,52 6,87
2 219,10
6,30
216,91 221,29
5,51 7,56
203,0 313,0
10,90
2 8,00 7,00 9,60 13,70
2 12,50 10,94 15,00 21,00
2 273,00 6,30 270,27 275,73 5,51 7,56 254,0 391,0 16,50
2 8,80 7,70 10,56 22,90
2 323,90 7,10 320,66 327,14 6,21 8,52 305,0 467,0 26,60
2 355,60 8,00 352,04 359,16 7,00 9,60 356,0 533,0 38,20
2 406,40 8,80 402,34 410,46 7,70 10,56 406,0 610,0 55,10
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
RADI
US M
M.
RM
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
MOD
EL3MODEL OUTSIDE DIA
MET
ER
D
WAL
L THI
CkNE
SS
WT
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
RADI
US M
M.
RM
QUOT
E H
THEO
RETIC
AL W
EIgHT
90
kg.
2
34 35
MIN
O.D
. TOL
ERAN
CE
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
THEO
RETIC
AL W
EIgHT
90
kg.
THEO
RETIC
AL W
EIgHT
90
kg.
3 57,00 2,90 56,43 57,57 2,54 3,48 72,00 100,00 0,44 3 3,20 2,80 3,84 0,48 3
60,30
2,90
59,70 60,90
2,54 3,48
76,00 106,00
0,49 3 3,20 2,80 3,84 0,54 3 3,60 3,15 4,32 0,60 3 4,00 3,50 4,80 0,67 3 4,50 3,94 5,40 0,74 3 5,00 4,38 6,00 0,82 3 5,60 4,90 6,72 0,90 3 6,30 5,51 7,56 1,00 3 7,10 6,21 8,52 1,11 3 8,00 7,00 9,60 1,23 3 8,80 7,70 10,56 1,34 3 10,00 8,75 12,00 1,48 3 11,00 9,63 13,20 1,60 3 63,50 2,90 62,87 64,14 2,54 3,48 82,50 114,00 0,56 3 70,00 2,90 69,30 70,70 2,54 3,48 92,00 127,00 0,70 3 3,20 2,80 3,84 0,76 3
76,10
2,90
75,34 76,86
2,54 3,48
95,00 133,00
0,78 3 3,20 2,80 3,84 0,86 3 3,60 3,15 4,32 0,96 3 4,00 3,50 4,80 1,06 3 4,50 3,94 5,40 1,19 3 5,00 4,38 6,00 1,31 3 5,60 4,90 6,72 1,46 3 6,30 5,51 7,56 1,62 3 7,10 6,21 8,52 1,81 3
82,50 3,20
81,68 83,33 2,80 3,84
107,50 149,00 1,06
3 3,60 3,15 4,32 1,19 3 4,00 3,50 4,80 1,31 3
88,90
3,20
88,01 89,79
2,80 3,84
114,50 159,00
1,22 3 3,60 3,15 4,32 1,36 3 4,00 3,50 4,80 1,51 3 4,50 3,94 5,40 1,69 3 5,00 4,38 6,00 1,86 3 5,60 4,90 6,72 2,07 3 6,30 5,51 7,56 2,31 3 7,10 6,21 8,52 2,58 3 8,00 7,00 9,60 2,87 3 12,50 10,94 15,00 4,24 3
101,60
3,60
100,58 102,62
3,15 4,32
133,50 184,00
1,83 3 4,00 3,50 4,80 2,02 3 4,50 3,94 5,40 2,26 3 5,00 4,38 6,00 2,50 3 5,60 4,90 6,72 2,78
3
108,00
3,60
106,92 109,08
3,15 4,32
142,50 196,00
2,08 3 4,00 3,50 4,80 2,30 3 4,50 3,94 5,40 2,57 3 5,00 4,38 6,00 2,85 3 5,60 4,90 6,72 3,17 3
114,30
3,60
113,16 115,44
3,15 4,32
152,50 210,00
2,36 3 4,00 3,50 4,80 2,61 3 4,50 3,94 5,40 2,92 3 5,00 4,38 6,00 3,23 3 5,60 4,90 6,72 3,60 3 6,30 5,51 7,56 4,02 3 7,10 6,21 8,52 4,50 3 8,00 7,00 9,60 5,03 3 8,80 7,70 10,56 5,49 3 12,50 10,94 15,00 7,52 3
133,00
4,00
131,67 134,33
3,50 4,80
181,00 247,00
3,62 3 4,50 3,94 5,40 4,06 3 5,00 4,38 6,00 4,49 3 5,60 4,90 6,72 5,00 3 8,00 7,00 9,60 7,01 3 10,00 8,75 12,00 8,63 3
139,70
4,00
138,30 141,10
3,50 4,80
190,40 260,00
4,01 3 4,50 3,94 5,40 4,49 3 5,00 4,38 6,00 4,97 3 5,60 4,90 6,72 5,54 3 6,30 5,51 7,56 6,20 3 7,10 6,21 8,52 6,95 3 8,80 7,70 10,56 8,50 3 10,00 8,75 12,00 9,57 3
159,00
4,50
157,41 160,59
3,94 5,40
216,00 294,00
5,82 3 5,00 4,38 6,00 6,45 3 5,60 4,90 6,72 7,19 3 6,30 5,51 7,56 8,05 3 7,10 6,21 8,52 9,03 3 8,00 7,00 9,60 10,10 3
168,30
4,50
166,62 169,98
3,94 5,40
228,50 313,00
6,53 3 5,00 4,38 6,00 7,23 3 5,60 4,90 6,72 8,07 3 6,30 5,51 7,56 9,04 3 7,10 6,21 8,52 10,10 3 8,80 7,70 10,56 12,40 3 11,00 9,63 13,20 15,30 3 12,50 10,94 15,00 17,20
MOD
EL
MOD
EL3 3 OUTSIDE DIA
MET
ER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
R=1,5 DSEAMLESS
ELBOWSEN-10253-2
R=1,5 DSEAMLESSELBOWSEN-10253-2
36 37
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
THEO
RETIC
AL W
EIgHT
90
kg.
3
193,70
5,60
191,76 195,64
4,90 6,72
270,00 367,00
11,00 3 6,30 5,51 7,56 12,40 3 7,10 6,21 8,52 13,90 3 8,00 7,00 9,60 15,50 3 8,80 7,70 10,56 17,00 3
219,10
6,30
216,91 221,29
5,51 7,56
305,00 415,00
15,80 3 7,10 6,21 8,52 17,80 3 8,00 7,00 9,60 20,00 3 8,80 7,70 10,56 21,90 3 10,00 8,75 12,00 24,70 3 12,50 10,94 15,00 30,50 3
244,50
6,30
242,06 246,95
5,51 7,56
340,00 462,00
19,80 3 7,10 6,21 8,52 22,20 3 8,00 7,00 9,60 24,90 3 8,80 7,70 10,56 27,30 3 10,00 8,75 12,00 30,90 3 12,50 10,94 15,00 38,20 3 267,00 6,30 264,33 269,67 5,51 7,56 373,00 507,00 23,70 3
273,00
6,30
270,27 275,73
5,51 7,56
381,00 517,00
24,80 3 7,10 6,21 8,52 27,90 3 8,00 7,00 9,60 31,30 3 8,80 7,70 10,56 34,30 3 10,00 8,75 12,00 38,80 3 12,50 10,94 15,00 48,10 3
323,90
7,10
320,66 327,14
6,21 8,52
457,00 619,00
39,80 3 8,00 7,00 9,60 44,70 3 8,80 7,70 10,56 49,10 3 10,00 8,75 12,00 55,60 3 12,50 10,94 15,00 68,90 3
355,60
8,00
352,04 359,16
7,00 9,60
533,50 711,00
57,50 3 8,80 7,70 10,56 63,10 3 10,00 8,75 12,00 71,40 3 12,50 10,94 15,00 88,60 3 368,00 8,00 364,32 371,68 7,00 9,60 552,00 736,00 59,00 3
406,40 8,80
402,34 410,46 7,70 10,56
609,50 813,00 82,60
3 10,00 8,75 12,00 93,60 3 12,50 10,94 15,00 116,00 3 457,00 10,00 452,43 461,57 8,75 12,00 686,00 914,00 119,00 3 12,50 10,94 15,00 148,00 3 508,00 11,00 502,92 513,08 9,63 13,20 762,00 1.016,00 161,00 3 12,50 10,94 15,00 183,00 3 558,80 12,50 553,21 564,39 10,94 15,00 838,00 1.118,00 222,00 3 609,60 12,50 603,50 615,70 10,94 15,00 914,00 1.219,00 260,00
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
THEO
RETIC
AL W
EIgHT
90
kg.
5 21,30
2,00 20,80 21,80
1,75 2,40 42,50 53,00
0,07
5 2,90 2,54 3,48 0,09 5 3,60 3,15 4,32 0,11 5
26,90 2,30
26,40 27,40 2,01 2,76
57,50 71,00 0,13
5 2,90 2,54 3,48 0,16 5 4,00 3,50 4,80 0,21 5
33,70 2,60
33,20 34,20 2,28 3,12
72,50 89,00 0,23
5 3,60 3,15 4,32 0,31 5 4,50 3,94 5,40 0,37 5 38,00 2,60 37,50 38,50 2,28 3,12 82,50 101,00 0,30 5
42,40 2,60
41,90 42,90 2,28 3,12
92,50 114,00 0,37
5 3,60 3,15 4,32 0,50 5 5,00 4,38 6,00 0,67 5
48,30 2,60
47,80 48,80 2,28 3,12
107,50 132,00 0,50
5 3,60 3,15 4,32 0,67 5 5,00 4,38 6,00 0,90 5
60,30 2,90
59,70 60,90 2,54 3,48
135,00 165,00 0,87
5 4,00 3,50 4,80 1,18 5 5,60 4,90 6,72 1,60 5 70,00 2,90 69,30 70,70 2,54 3,48 160,00 195,00 1,21 5
76,10 2,90
75,34 76,86 2,54 3,48
175,00 213,00 1,44
5 5,00 4,38 6,00 2,41 5 7,10 6,21 8,52 3,32 5
88,90 3,20
88,01 89,79 2,80 3,84
205,00 249,00 2,18
5 5,60 4,90 6,72 3,71 5 8,00 7,00 9,60 5,14 5
101,60 3,60
100,58 102,62 3,15 4,32
237,50 288,00 3,25
5 5,60 4,90 6,72 4,95 5 8,00 7,00 9,60 6,89 5 108,00 3,60 106,92 109,08 3,15 4,32 252,50 306,00 3,68 5
114,30 3,60
113,16 115,44 3,15 4,32
270,00 327,00 4,17
5 6,30 5,51 7,56 7,12 5 8,80 7,70 10,56 9,71 5 133,00 4,00 131,67 134,33 3,50 4,80 312,50 379,00 6,25 5
139,70 4,00
138,30 141,10 3,50 4,80
330,00 400,00 6,94
5 6,30 5,51 7,56 10,80 5 10,00 8,75 12,00 16,60 5 159,00 4,50 157,41 160,59 3,94 5,40 375,00 454,00 10,10 5
168,30 4,50
166,62 169,98 3,94 5,40
390,00 474,00 11,10
5 7,10 6,21 8,52 17,30 5 11,00 9,63 13,20 26,10 5 193,70 5,60 191,76 195,64 4,90 6,72 455,00 552,00 17,90
MOD
EL
MOD
EL3 5 OUTSIDE DIA
MET
ER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
R=1,5 DSEAMLESS
ELBOWSEN-10253-2
R=2,5 DSEAMLESSELBOWSEN-10253-2
38 39
SEAMLESS ELBOWS
SEAMLESS ELBOWS
R=1,5 DWELDEDELBOWS
EN-10253-2
EN-10253-2
EN-10253-2
5 219,10
6,30 216,91 221,29
5,51 7,56 510,00 619,00
26,50 5 8,00 7,00 9,60 33,40 5 12,50 10,94 15,00 51,00 5 244,50 6,30 242,06 246,95 5,51 7,56 580,00 702,00 33,70 5
273,00 6,30
270,27 275,73 5,51 7,56
650,00 786,00 42,30
5 10,00 8,75 12,00 66,20 5 12,50 10,94 15,00 82,00 5
323,90 7,10
320,66 327,14 6,21 8,52
775,00 937,00 67,50
5 10,00 8,75 12,00 94,20 5 12,50 10,94 15,00 117,00 5
355,60 8,00
352,04 359,16 7,00 9,60
850,00 1.028,00 91,60
5 10,00 8,75 12,00 114,00 5 12,50 10,94 15,00 141,00 5
406,40 8,80
402,34 410,46 7,70 10,56
970,00 1.173,00 132,00
5 10,00 8,75 12,00 149,00 5 12,50 10,94 15,00 185,00
3 26,90 2,30 26,40 27,40 2,01 2,76 29 43 0,06
3 33,70 2,60 33,20 34,20 2,28 3,12 38 56 0,12
3 42,40 2,60 41,90 42,90 2,28 3,12 48 69 0,19
3 48,30 2,60 47,80 48,80 2,28 3,12 57 82 0,26
3 60,30 2,90 59,70 60,90 2,54 3,48 76 106 0,49
3 76,10 2,90 75,34 76,86 2,54 3,48 95 133 0,78
3 88,90 3,20 88,01 89,79 2,80 3,84 114 159 1,22
3 101,60 3,60 100,58 102,62 3,15 4,32 134 184 1,83
3 108,00 3,60 106,92 109,08 3,15 4,32 143 196 2,08
3 114,30 3,60 113,16 115,44 3,15 4,32 152 210 2,36
3 133,00 4,00 131,67 134,33 3,50 4,80 181 247 3,62
3 139,70 4,00 138,30 141,10 3,50 4,80 190 260 4,00
3 159,00 4,50 157,41 160,59 3,94 5,40 216 294 5,80
3 168,30 4,50 166,62 169,98 3,94 5,40 229 313 6,50
3 193,70 5,60 191,76 195,64 4,90 6,72 270 367 11,00
3 219,10 4,50 216,91 221,29 3,94 5,40 305 414 11,40
3 6,30 5,51 7,56 15,80
3 273,00 5,00 270,27 275,73 4,38 6,00 381 518 19,80
3 6,30 5,51 7,56 24,80
3 323,90 5,60 320,66 327,14 4,90 6,72 457 619 31,60
3 7,10 6,21 8,52 39,80
3 355,60 5,60 352,04 359,16 4,90 6,72 533 711 40,50
3 406,00 6,30 401,94 410,06 5,51 7,56 610 813 67,00
3 457,20 6,30 452,63 461,77 5,51 7,56 686 914 84,90
3 508,00 6,30 502,92 513,08 5,51 7,56 762 1.016 105,00
3 609,60 6,30 603,50 615,70 5,51 7,56 914 1.219 152,00
3 7,10 6,21 8,52 152,00
3 711,00 7,10 703,89 718,11 6,21 8,52 1.067 1.422 232,00
3 8,00 7,00 9,60 232,00
3 813,00 8,00 804,87 821,13 7,00 9,60 1.219 1.626 299,00
10 48,30 2,60 47,80 48,80 2,28 3,12 190,00 214,00 0,87 10 3,60 3,15 4,32 1,18 10 60,30 2,90 59,70 60,90 2,54 3,48 254,00 284,00 1,64 10 4,00 3,50 4,80 2,22 10 88,90 3,20 88,01 89,79 2,80 3,84 381,00 425,00 4,05 10 5,60 4,90 6,72 6,88 10 114,30 3,60 113,16 115,44 3,15 4,32 508,00 565,00 7,84 10 6,30 5,51 7,56 13,39 10 168,30 4,50 166,62 169,98 3,94 5,40 762,00 846,00 21,76 10 7,10 6,21 8,52 33,78 10 219,10 6,30 216,91 221,29 5,51 7,56 1.016,00 1.126,00 52,76 10 8,00 7,00 9,60 66,47 10 273,00 6,30 270,27 275,73 5,51 7,56 1.270,00 1.407,00 82,66 10 8,80 7,70 10,56 114,38 10
323,90 6,30
320,66 327,14 5,51 7,56
1.524,00 1.686,00 118,13
10 8,80 7,70 10,56 163,70 10 10,00 8,75 12,00 185,32 10 355,60 7,92 352,04 359,16 6,93 9,50 1.956,00 2.136,00 208,65 10 9,50 8,31 11,40 249,13 10 406,40 7,92 402,34 410,46 6,93 9,50 2.235,00 2.438,00 273,24 10 9,50 8,31 11,40 326,45
MOD
ELM
ODEL
MOD
EL
5
10
3M
IN O
.D. T
OLER
ANCE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
THEO
RETIC
AL W
EIgHT
90
kg.
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
THEO
RETIC
AL W
EIgHT
90
kg.
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
THEO
RETIC
AL W
EIgHT
90
kg.
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
RADI
US M
M.
RM
QUOT
E H
40 41
SEAMLESSCONCENTRIC
REDUCERS
SEAMLESSEQUAL ANDREDUCINg TEES
EN-10253-2 EN-10253-2
DIAM
ETER
1 D1
DIAM
ETER
2 D2
WAL
L THI
CkNE
SS 1
WT1
WAL
L THI
CkNE
SS 2
WT2
C M
M.
C+C
MM
.
THEO
RETIC
AL W
EIgHT
kg.
33,70 26,90 2,60 2,30 50 0,09
42,40 26,90 2,60 2,30 50 0,13 33,70 2,60 2,60 0,14
48,30 26,90 2,60 2,30
64 0,19
33,70 2,60 2,60 0,20
42,40 2,60 2,60 0,20
60,30 33,70 2,90 2,60
76 0,31
42,40 2,90 2,60 0,32
48,30 2,90 2,60 0,33
76,10 42,40 2,90 2,60
90 0,47
48,30 2,90 2,60 0,48
60,30 2,90 2,90 0,49
88,90 48,30 3,20 2,60
90 0,61
60,30 3,20 2,90 0,62
76,10 3,20 2,90 0,63
101,60 88,90 3,60 3,20 100 0,88
108,00 60,30 3,60 2,90
100 0,90
76,10 3,60 2,90 0,90
88,90 3,60 3,20 0,90
114,30 60,30 3,60 2,90
100 0,98
76,10 3,60 2,90 1,00
88,90 3,60 3,20 1,00
133,00 88,90 4,00 3,20
127 1,50
108,00 4,00 3,60 1,50
114,30 4,00 3,60 1,50
139,70
76,10 4,00 2,90
127
1,70
88,90 4,00 3,20 1,74
108,00 4,00 3,60 1,74
114,30 4,00 3,60 1,76
159,00
108,00 4,50 3,60
140
2,30
114,30 4,50 3,60 2,30
133,00 4,50 4,00 2,30
139,70 4,50 4,00 2,30
168,30 88,90 4,50 3,20
140 2,70
114,30 4,50 3,60 2,82
139,70 4,50 4,00 2,94
219,00
114,30 6,30 3,60
152
5,03
139,70 6,30 4,00 5,12
159,00 6,30 4,50 5,18
168,30 6,30 4,50 5,18
273,00 168,30 6,30 4,50 178 7,40 219,10 6,30 6,30 7,55
323,90 219,10 7,10 6,30 203 11,50 273,00 7,10 6,30 11,90
355,60 273,00 8,00 6,30 330 23,00 323,90 8,00 7,10 23,50
406,40 273,00 8,80 6,30 355 31,40 323,90 8,80 7,10 32,20
21,30 21,30 2,00 2,00 25 50 0,09 26,90 26,90 2,30 2,30 29 58 0,15
33,70 33,70 2,60 2,60
38 76
0,25
21,30 2,60 2,00 0,25 26,90 2,60 2,30 0,25
42,40 42,40 2,60 2,60
48 960,47
26,90 2,60 2,30 0,47 33,70 2,60 2,60 0,47
48,30
48,30 2,60 2,60
57 114
0,68
26,90 2,60 2,30 0,68 33,70 2,60 2,60 0,68 42,40 2,60 2,60 0,68
60,30
60,30 2,90 2,90
64 128
1,10
33,70 2,90 2,60 1,10 42,40 2,90 2,60 1,10 48,30 2,90 2,60 1,10
76,10
76,10 2,90 2,90
76 152
1,50
42,40 2,90 2,60 1,50 48,30 2,90 2,60 1,50 60,30 2,90 2,90 1,50
88,90
88,90 3,20 3,20 1,50 48,30 3,20 2,60
86 1722,20
60,30 3,20 2,90 2,20 76,10 3,20 2,90 2,20
114,30
114,30 3,60 3,60
105 210
4,30
60,30 3,60 2,90 4,30 76,10 3,60 2,90 4,30 88,90 3,60 3,20 4,30
139,70
139,70 4,00 4,00
124 248
6,20
76,10 4,00 2,90 6,20 88,90 4,00 3,20 6,20
114,30 4,00 3,60 6,20
168,30
168,30 4,50 4,50
143 286
9,00
88,90 4,50 3,20 8,80 114,30 4,50 3,60 8,80 139,70 4,50 4,00 9,00
219,10
219,10 6,30 6,30
178 356
19,70
88,90 6,30 3,20 19,70 114,30 6,30 3,60 19,70 139,70 6,30 4,00 19,70 168,30 6,30 4,50 19,70
273,00 273,00 6,30 6,30
216 43226,20
168,30 6,30 4,50 26,20 219,10 6,30 6,30 26,20
323,90 323,90 7,10 7,10
254 50849,00
219,10 7,10 6,30 47,00 273,00 7,10 6,30 47,00
355,60 355,60 8,00 8,00 279 558 68,00
O.D.
(1) M
M.
D1
O.D.
(2) M
M.
D2
W.T.
(1) M
M.
WT1
W.T.
(2) M
M.
WT2
HEIg
HT M
M.
H
THEO
RETIC
AL W
EIgHT
kg.
42 43
DISHEDENDS
EN-10253-2S235 PRESSURE EQUIPMENT
DIRECTIvE (PED) 97/23/EC
the European Pressure Equipment directive 97/23/CE fixes the re-quirements for security of the pressure equipment. the producer of wrought butt welded fittings must operate with a quality Mana-gement System according to ISO-9001:2000. Such system must be certified based on the specific evaluation of the materials produced by a competent operating organism in the European Community.
VIRGILIO CENA & FIGLI S.p.a. has achieved the following certifi-cation:
LLOYDs Register n LRC 0160142/qMS dated december 26, 2009 approval certification according to ISO 9001:2008 with the specific note that the quality System satisfies the requirements in-dicated in Annex I Sect. 4.3 of the European directive 97/23/EC.
TV n 24/2002/MUC dated April 27, 2009 approval certifica-tion specifying that the quality System is in accordance with the Pressure Equipment directive 97/23/EC Annex I, Par 4.3 (PEd).
VIRGILIO CENA & FIGLI S.p.a. can supply product and documenta-tion conformed to the PEd, according to EN 10253-2. these condi-tions are nonetheless open to technical and commercial discussions to be defined by the parties officially in the purchase order.
END fINISHINgEN 10253-2
TYPE
WAL
L THI
CkNE
SS M
M
DESIg
NATIO
N
DETA
ILS
1 Up to 3 I - bevel
22 Up to 16 V - bevel
3 Above 12 U - bevel
4 Above 12 UV Compound bevel
From 4.66 to 21.56 Plain bevel
Above 21.56 Compound bevel
OUTS
IDE D
IAM
ETER
D
WAL
L THI
CkNE
SS
WT
MIN
O.D
. TOL
ERAN
CE
MAX
O.D
. TOL
ERAN
CE
MIN
W.T.
TOLE
RANC
E
MAX
W.T.
TOLE
RANC
E
INTE
RNAL
HEIg
HT M
M.
H
THEO
RETIC
AL W
EIgHT
kg.
26,90 2,30 26,40 27,40 2,01 2,76 11 0,02 33,70 2,60 33,20 34,20 2,28 3,12 11 0,03 42,40 2,60 41,90 42,90 2,28 3,12 11 0,05 48,30 2,60 47,80 48,80 2,28 3,12 12 0,06 60,30 2,90 59,70 60,90 2,54 3,48 17 0,10 76,10 2,90 75,34 76,86 2,54 3,48 19 0,16 88,90 3,20 88,01 89,79 2,80 3,84 23 0,22 101,60 3,60 100,58 102,62 3,15 4,32 25 0,34 108,00 3,60 106,92 109,08 3,15 4,32 26 0,39 114,30 3,60 113,16 115,44 3,15 4,32 26 0,39 133,00 4,00 131,67 134,33 3,50 4,80 32 0,56 139,70 4,00 138,30 141,10 3,50 4,80 36 0,63 159,00 4,50 157,41 160,59 3,94 5,40 43 0,93 168,30 4,50 166,62 169,98 3,94 5,40 45 1,06 193,70 5,40 191,76 195,64 4,73 6,48 56 1,87 219,10 6,30 216,91 221,29 5,51 7,56 69 2,82 244,50 6,30 242,06 246,95 5,51 7,56 75 3,41 273,00 6,30 270,27 275,73 5,51 7,56 90 5,00 323,90 7,10 320,66 327,14 6,21 8,52 99 6,32 355,60 8,00 352,04 359,16 7,00 9,60 106 10,14 406,40 8,80 402,34 410,46 7,70 10,56 125 10,94
CERTIfICATION
REfERENCE LIST AvAILABLE AT www.cenafittings.com
4544
Model 1 2 3 4 5 6 7 8T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D
DN D X X X X X X X X X X X X X X X X X X X X X X X X 15 21,3 - - - - 2,0 76 85 87 2,6 76 85 87 3,2 77 86 88 4,0 79 87 88 - - - - 5,0 80 88 89 7,1 84 90 91 20 26,9 - - - - 2,3 67 80 87 2,6 67 80 88 3,2 68 81 88 4,0 69 82 88 4,5 70 82 89 5,6 72 83 89 8,0 77 86 91 25 33,7 - - - - 2,6 55 74 87 3,2 55 74 88 4,0 57 75 88 4,5 58 75 88 5,6 60 77 89 6,3 61 77 89 8,8 66 80 90 32 42,4 - - - - 2,6 55 73 87 3,6 55 74 88 4,0 56 74 88 5,0 58 75 88 6,3 60 76 89 8,0 62 78 89 10,0 65 79 90 40 48,3 - - - - 2,6 57 74 88 3,6 57 75 88 4,0 58 75 88 5,0 59 76 88 6,3 61 77 89 8,0 63 78 89 10,0 65 79 90 50 60,3 - - - - 2,9 61 76 88 3,6 61 76 88 4,0 61 77 88 5,6 62 77 88 7,1 64 78 89 8,8 65 79 89 11,0 67 80 90 65 76,1 - - - - 2,9 59 76 88 3,6 59 76 88 5,6 60 77 88 7,1 61 77 88 8,0 62 77 89 10,0 63 78 89 14,2 67 80 90 80 88,9 - - - - 3,2 60 76 88 4,0 60 76 88 5,6 61 77 88 8,0 63 78 89 8,8 63 78 89 11,0 65 79 89 16,0 68 80 90
100 114,3 - - - - 3,6 62 77 88 4,5 62 77 88 6,3 63 78 88 8,8 64 78 89 11,0 65 79 89 14,2 67 80 89 17,5 68 80 90 125 139,7 - - - - 4,0 63 78 88 5,0 63 78 88 6,3 64 78 88 10,0 65 79 89 12,5 66 79 89 16,0 67 80 89 20,0 68 81 89 150 168,3 4,0 62 78 88 4,5 63 78 88 5,6 63 78 88 7,1 63 78 88 11,0 64 79 88 14,2 65 79 88 17,5 66 80 89 22,2 67 80 89 200 219,1 4,5 63 78 88 6,3 64 78 88 7,1 64 78 88 8,0 64 78 88 12,5 65 79 88 16,0 66 79 88 17,5 66 80 89 22,2 67 80 89 250 273,0 5,0 64 78 88 6,3 64 78 88 8,8 64 78 88 10,0 64 79 88 12,5 65 79 88 16,0 65 79 88 22,2 66 80 89 30,0 68 80 89 300 323,9 5,6 64 78 88 7,1 65 78 88 8,8 65 79 88 10,0 65 79 88 12,5 65 79 88 17,5 66 79 88 25,0 67 80 89 32,0 68 80 89 350 355,6 5,6 67 80 88 8,0 67 80 88 10,0 67 80 88 12,5 68 80 88 16,0 68 80 88 20,0 68 81 88 28,0 69 81 89 36,0 70 82 89 400 406,4 6,3 67 80 88 8,8 67 80 88 10,0 67 80 88 12,5 67 80 88 17,5 68 80 88 22,2 68 81 88 30,0 69 81 89 40,0 70 82 89 450 457,0 6,3 67 80 88 10,0 67 80 88 11,0 67 80 88 12,5 67 80 88 17,5 68 80 89 22,2 68 81 89 32,0 69 81 89 45,0 70 82 89 500 508,0 6,3 67 80 88 10,0 67 80 88 11,0 67 80 88 12,5 67 80 88 17,5 68 80 89 25,0 68 81 89 36,0 69 81 89 50,0 70 82 89 600 610,0 6,3 67 80 89 10,0 67 80 89 12,5 67 80 89 17,5 67 80 89 25,0 68 80 89 30,0 68 81 89 45,0 69 81 89 60,0 70 82 90 700 711,0 7,1 67 80 89 10,0 67 80 89 12,5 67 80 89 25,0 68 80 89 - - - - - - - - - - - - - - - - 800 813,0 8,0 67 80 88 10,0 67 80 89 12,5 67 80 89 25,0 67 80 89 - - - - - - - - - - - - - - - -
P R E S S U R E f A C T O R S O f E L B O W S TYPE A ACCORDINg TO EN 10253-2 2007
4746
Model 1 2 3 4 5 6 7 8T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5D T 2D 3D 5d
DN D Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint Tint tint 15 21,3 - - - - 2,0 2,7 2,4 2,4 2,6 3,5 3,1 3,1 3,2 4,3 3,8 3,7 4,0 5,3 4,7 4,7 - - - - 5,0 6,5 5,9 5,8 7,1 9,0 8,3 8,1 20 26,9 - - - - 2,3 3,5 2,9 2,7 2,6 3,9 3,3 3,0 3,2 4,8 4,0 3,7 4,0 5,9 5,0 4,6 4,5 6,5 5,6 5,2 5,6 8,0 6,9 6,4 8,0 11,0 9,8 9,1 25 33,7 - - - - 2,6 4,7 3,6 3,0 3,2 5,7 4,4 3,7 4,0 6,9 5,4 4,6 4,5 7,7 6,1 5,2 5,6 9,2 7,5 6,4 6,3 10,2 8,4 7,2 8,8 13,5 11,4 10,0 32 42,4 - - - - 2,6 4,7 3,6 3,0 3,6 6,4 4,9 4,2 4,0 7,0 5,5 4,6 5,0 8,5 6,8 5,8 6,3 10,4 8,4 7,2 8,0 12,8 10,6 9,1 10,0 15,4 13,1 11,4 40 48,3 - - - - 2,6 4,6 3,5 3,0 3,6 6,2 4,9 4,1 4,0 6,8 5,4 4,6 5,0 8,4 6,7 5,7 6,3 10,3 8,4 7,2 8,0 12,7 10,5 9,1 10,0 15,4 13,0 11,3 50 60,3 - - - - 2,9 4,8 3,9 3,3 3,6 5,9 4,8 4,1 4,0 6,5 5,3 4,6 5,6 8,9 7,3 6,4 7,1 11,1 9,2 8,1 8,8 13,5 11,4 10,0 11,0 16,5 14,1 12,5 65 76,1 - - - - 2,9 5,0 3,9 3,3 3,6 6,1 4,8 4,1 5,6 9,2 7,4 6,4 7,1 11,5 9,3 8,1 8,0 12,8 10,5 9,1 10,0 15,7 13,0 11,4 14,2 21,5 18,2 16,1 80 88,9 - - - - 3,2 5,3 4,2 3,7 4,0 6,6 5,3 4,6 5,6 9,1 7,3 6,4 8,0 12,7 10,4 9,1 8,8 13,9 11,4 10,0 11,0 17,0 14,2 12,5 16,0 23,9 20,4 18,1
100 114,3 - - - - 3,6 5,8 4,7 4,1 4,5 7,2 5,9 5,1 6,3 9,9 8,2 7,2 8,8 13,7 11,3 10,0 11,0 16,9 14,1 12,5 14,2 21,4 18,1 16,1 17,5 25,9 22,1 19,8 125 139,7 - - - - 4,0 6,4 5,2 4,6 5,0 7,9 6,5 5,7 6,3 9,9 8,1 7,2 10,0 15,4 12,8 11,4 12,5 19,0 15,9 14,2 16,0 24,0 20,3 18,1 20,0 29,5 25,2 22,6 150 168,3 4,0 6,4 5,2 4,6 4,5 7,2 5,8 5,2 5,6 8,9 7,2 6,4 7,1 11,2 9,1 8,1 11,0 17,1 14,1 12,5 14,2 21,7 18,1 16,1 17,5 26,5 22,2 19,9 22,2 33,0 28,0 25,1 200 219,1 4,5 7,1 5,8 5,2 6,3 9,8 8,1 7,2 7,1 11,1 9,1 8,1 8,0 12,4 10,2 9,1 12,5 19,1 15,9 14,2 16,0 24,3 20,3 18,1 17,5 26,4 22,1 19,8 22,2 33,1 28,0 25,1 250 273,0 5,0 7,9 6,4 5,7 6,3 9,9 8,1 7,2 8,8 13,7 11,2 10,0 10,0 15,5 12,8 11,4 12,5 19,2 15,9 14,2 16,0 24,4 20,3 18,1 22,2 33,4 28,0 25,1 30,0 44,4 37,7 33,9 300 323,9 5,6 8,7 7,2 6,4 7,1 11,0 9,1 8,1 8,8 13,6 11,2 10,0 10,0 15,4 12,7 11,4 12,5 19,2 15,9 14,2 17,5 26,6 22,1 19,8 25,0 37,4 31,5 28,3 32,0 47,3 40,1 36,1 350 355,6 5,6 8,4 7,0 6,4 8,0 11,9 10,0 9,1 10,0 14,8 12,5 11,4 12,5 18,5 15,6 14,2 16,0 23,5 19,9 18,1 20,0 29,2 24,8 22,6 28,0 40,4 34,6 31,6 36,0 51,5 44,4 40,6 400 406,4 6,3 9,4 7,9 7,2 8,8 13,1 11,0 10,0 10,0 14,9 12,5 11,4 12,5 18,5 15,6 14,2 17,5 25,7 21,8 19,8 22,2 32,5 27,6 25,1 30,0 43,5 37,1 33,9 40,0 57,3 49,3 45,1 450 457,0 6,3 9,4 7,9 7,2 10,0 14,9 12,5 11,3 11,0 16,3 13,7 12,4 12,5 18,5 15,6 14,1 17,5 25,8 21,8 19,8 22,2 32,5 27,6 25,0 32,0 46,4 39,6 36,0 45,0 64,4 55,5 50,6 500 508,0 6,3 9,4 7,9 7,2 10,0 14,9 12,5 11,3 11,0 16,4 13,8 12,4 12,5 18,6 15,6 14,1 17,5 25,8 21,8 19,8 25,0 36,6 31,1 28,2 36,0 52,2 44,6 40,5 50,0 71,6 61,6 56,2 600 610,0 6,3 9,4 7,9 7,1 10,0 14,9 12,5 11,3 12,5 18,6 15,6 14,1 17,5 25,9 21,8 19,7 25,0 36,8 31,1 28,1 30,0 43,9 37,3 33,7 45,0 65,1 55,7 50,5 60,0 85,9 74,0 67,3 700 711,0 7,1 10,6 8,9 8,0 10,0 14,9 12,6 11,4 12,5 18,6 15,6 14,1 25,0 36,9 31,1 28,1 - - - - - - - - - - - - - - - - 800 813,0 8,0 12,0 10,0 9,0 10,0 15,0 12,6 11,4 12,5 18,6 15,6 14,1 25,0 37,0 31,2 28,1 - - - - - - - - - - - - - - - -
W A L L T H I C k N E S S O NT H E I N T R A D O S O f E L B O W S TYPE b ACCORDINg TO EN 10253-2 2007
48 49
STEEL gRADES fOR PIPESMOSTLY USED TO PRODUCECENA SEAMLESS ELBOWS
USE
EN 10
253-
2
ASM
E B16
.9
DIN
2609
ASTM
/ASM
E
Use in pressure Room temperature
P235tR2 St37.0(2)
P265tR2 St44.0(2)
Use in pressure High temperature
St35.8/III(2)
P265Gh WPB WPC St45.8(2) A 106 Gr.B(3)
16Mo3 WP1 15Mo3(1) A 335 P1 (3)
13CrMo5-5 WP11 A 335 P11 (3)
13CrMo4-5 WP12 13CrMo4-4(1) A 335 P12 (3)
10CrMo9-10 WP22 10CrMo9-10(1) A 335 P22 (3)
x11CrMo5 WP5 A 335 P5 (3)
x11CrMo9-1 WP9 A 335 P9 (3)
x10CrMoVNb9-1 WP91 A 335 P91 (3)
Use in pressure Low temperature
P215NL
P265NL WPL6 tstE285(2) A 333 Gr.6 (3)
12Ni14 10Ni14(1)
x10Ni9
Use in pressure Combustible fluids
L290NB WPhy42 StE290.7(1) API 5L x42(3)
L360NB WPhy52 StE360.7(1) API 5L x52(3)
L360qB
L415NB
L415qB WPhy60 API 5L x60(3)
L450qB WPhy65 API 5L x65(3)
(1) Equivalent steel according dIN(2) Equivalent steel but not according to dIN(3) Equivalent steel but not according to ASME/AStM
50 51
gENERAL SALES CONDITIONS
gENERAL SALES CONDITIONS
1 . DEfiNiTiONs1.1. CENA here after refers to VIRGILIO CENA & FIGLI S.p.a. located at Via Oberdan, 39, 25128 - Brescia Italy.1.2. Purchaser here after refers to the company indicated on the Purchase Order as Purchaser of the Products.1.3. Products here after refers to the products indicated on the Purchase Order.1.4. INCOtERMS 2000 here after refers to the official rules of the interpretation of commercial terms of the Chamber of International
Commerce, published in 2000. 1.5. Parties here after refers to both CENA and the Purchaser.1.6. Purchase Order here after refers to the document which contains the objective elements of a possible sale of the Products
between the Purchaser and CENA, which becomes a sales contract following the explicit or tacit acceptance by the Order Confirmation (as outlined here under).
1.7. Order Confirmation here after refers to the form sent by CENA to the Purchaser, referring to the present General Sales Conditions and which, if not refused within 2 working days of reception (proof of e-mail or fax sent by CENA), render the Purchasing Order binding between the Parties as a sales contract and subject to the present General Sales Conditions.
1.8. Services here after refers to the services to be rendered according to the Purchase Order.1.9. General Sales Conditions here after refers to the present General Sales Conditions.
2 . sOLE AgREEMENT2.1. the present General Sales Conditions constitute the only sales conditions and the sole agreement between the Parties regarding
the sale of the Products and substitutes any and all other related preceding agreements. the reception of the Order Confirmation by the Purchaser without any written objection within 2 working days following its reception results in the acceptance of the present General Sales Conditions on behalf of the Purchaser. No other declaration will be considered to have been made outside of those indicated in these General Sales Conditions.
2.2. Any issues conflicting with the present General Sales Conditions, indicated in any written document (including correspondence between the Purchaser and CENA), are null and only the present General Sales Conditions will be applied unless otherwise officially communicated by CENA and signed by the legal representatives of both Parties.
2.3. Should any individual aspect of these General Sales Conditions be void, wholly or partially, the remainder will continue to be valid and fully effective.
3 . APPLiCAbiLiTY3.1. the present General Sales Conditions apply to any and all Purchase Orders stipulated with CENA from the date of their acceptance,
unless otherwise officially indicated in writing by CENA.
4 . DELiVERY4.1. CENA will deliver the Products in conformity to the INCOtERMS 2000, agreed upon by the Parties and indicated in the Purchase
Order. CENA will respect the delivery terms agreed upon in the Order Confirmation. In case the delivery of the Products were to become impossible respecting the agreed upon terms for substantial production problems, the Parties will do their utmost to agree on new delivery terms keeping the above mentioned problems in consideration.
4.2. the delivery times and dates of delivery are only approximate. CENA shall endeavour to respect these. At any rate, CENA shall be entitled, even if binding dates of delivery have been agreed upon, to extend the delivery time sufficiently without being obligated to pay any compensation or penalty, if unforeseen circumstances, acts of God, interruption of work and particularly strikes or delay in the arrival of necessary material should occur. If in such a case it were found that by such interruptions it is impossible for CENA to fulfil the contract, CENA shall be entitled to withdraw from the contract without being liable to pay any damages whatsoever.
4.3. Should for any reasons whatsoever, especially if it is impossible for CENA to fulfil the contract, the latter be cancelled, the assertion of claims for damages in respect of compensation for any indirect or direct loss will be excluded.
4.4. It will be to CENAs discretion to effect partial shipment if it should be necessary. Each partial shipment can be invoiced separately. 4.5. When the Purchaser is notified of the Products being ready for despatch, the Purchaser must retrieve the Products immediately.
Should the Purchaser fail to do so or should there be no possibility of shipping the Products, CENA shall be entitled to store the Products at CENAs discretion and at the Purchasers risk and expense and to charge the Products as delivered ex works thereby entitling CENA to invoice the Products. the Purchaser cannot refuse any shipment or any partial shipment.
5 . REsERVATiON Of THE TRANsfER Of PROPERTY5.1. the propriety of the Products will pass to the Purchaser only upon complete payment of the relative Invoice on behalf of the
Purchaser, according to Article 7 of the present General Sales Conditions. CENA will remain proprietor of the Products sold and eventually delivered until the complete payment on behalf of the Purchaser. therefore, all CENA sales are always stipulated with the above stated reserve of propriety of the Products. the Purchaser, on the other hand, assumes all risks and responsibilities relative to the Products as indicated in the Purchase Order as well as in the INCOtERMS 2000 and, therefore, must be insured against these risks and responsibilities.
5.2. the presentation of a letter of credit or other commercial documentation does not constitute complete payment.5.3. Until the property of the Products passes to the Purchaser, the Purchaser will hold the Products as trustee holder of CENA, but will
have the faculty of using the Products for his normal commercial activities.5.4. the Purchaser will have to stock the Products sold by CENA until their complete payment, in a way that they remain clearly
identified as property of CENA , and cannot remove, hide or modify stickers or marks present of the Products which permit the identification of the Products as being property of CENA. Furthermore, the Purchaser will allow CENA to access its stores with the scope of inspecting the Products.
5.5. If the Products not yet completely paid for are non identifiable and are stocked with other Products of the same type supplied by CENA, it will be assumed that those Products are the unpaid Products and object of reservation of property of CENA.
5.6. In the case of non payment, and without any prejudice for the interests of these General Sales Conditions, CENA can request the restitution of the Products at the Purchasers risk and cost.
5.7. In case the Purchaser were not to return the Products immediately, the Purchaser can be obligated to do so coercively resorting
to judicial intervention, which authorizes CENA to take possession back of the Products, for which CENA continues to reserve the property, at the Purchasers address or elsewhere, all at the Purchasers expense. It is the Purchasers obligation to assure that this clause be imposed and applied to respect the spirit of
