CATALOGUE CATALOGUE condensing technology · 2012. 11. 29. · MAIOR EOLO combi with “Aqua...

CATALOGUE 03/2011

Gas boilers and condensing technology

CA

TALO

GU

E CATALOGUE

INDEX

HEAT PUMPS

AUDAX air/water inverter mono-phase heat pumps p. 6 System integrator electronic control for the management of integrated systems p. 7

LIGHT COMMERCIAL

VICTRIX 115 wall-hung modular condensing boiler for heating only p. 8 VICTRIX 90 wall-hung modular condensing boiler for heating only p. 9 VICTRIX 75 wall-hung modular condensing boiler for heating only p. 10 VICTRIX 50 wall-hung modular condensing boiler for heating only p. 11

CONDENSING BOILERS

WALL-HUNG WITH BUILT-IN STORAGE TANK

VICTRIX Zeus Superior kW with built-in stainless steel storage tank of 54 litres p. 12 VICTRIX Zeus with built-in stainless steel storage tank of 45 litres p. 13

WALL-HUNG COMBI AND HEATING ONLY

VICTRIX Superior kW hi-tech combi with “Aqua Celeris” p. 14 VICTRIX Superior kW X hi-tech heating only p. 15 VICTRIX compact combi p. 16 VICTRIX X compact heating only p. 17 VICTRIX R heating only, for open heating systems p. 18 EOLO Extra kW HP combi for outdoor installation, for high temperature systems p. 19

FLOOR-STANDING WITH BUILT-IN STORAGE TANK

HERCULES Condensing with built-in stainless steel storage tank of 120 litres p. 20

FLOOR-STANDING WITH BUILT-IN STORAGE TANK SOLAR SYSTEM READY

HERCULES Solar with built-in stainless steel storage tank of 200 litres, solar system ready p. 21

NEW

INDEXINDEX

TRADITIONAL BOILERS

WALL-HUNG WITH BUILT-IN STORAGE TANK

ZEUS Superior kW with built-in stainless steel storage tank of 60 litres p. 22 AVIO/ZEUS kW with built-in stainless steel storage tank of 45 litres p. 23

WALL-HUNG COMBI AND HEATING ONLY

MAIOR EOLO combi with “Aqua Celeris” p. 24 NIKE Mini 28 kW Special combi open chamber and conventional flue p. 25 MINI NIKE/EOLO compact instantaneous p. 26 MINI NIKE/EOLO X compact heating only p. 27 NIKE/EOLO Star combi with bithermal heat exchanger p. 28 EOLO Extra kW combi for outdoor installation p. 29

COMBI WATER HEATERS

JULIUS open chamber and conventional flue p. 30 CAESAR 14 / Super CAESAR 17 sealed chamber and fan assisted p. 31

STORAGE TANKS

IMMERSTOR p. 32

MULTI SYSTEM DISTRIBUTION MANIFOLDS

DIMV2 p. 33 DIMV2 TOP p. 34

FLUE SYSTEMS

“GREEN SERIES”

Flue systems for VICTRIX 50/75/90/115 p. 35 Flue system for condensing boilers < 35 kW Ø 60/100 p. 38 Flue system for condensing boilers < 35 kW Ø 80/80 p. 39 Ø 60 mm ducting system p. 40 Ø 80 mm flexible ducting system p. 42

“BLUE SERIES”

Flue systems for traditional boilers Ø 60/100 p. 44 Flue systems for traditional boilers Ø 80/80 p. 45 Flue systems for traditional boilers Ø 80/125 p. 47 Ø 80 mm ducting system p. 49

OPTIONS

Hydraulic system p. 52 Climatic regulation p. 60 Boiler and storage tank unit connection groups p. 64

INDEX OF CODES p. 65

During the life of a boiler, performance is influenced by external factors, e.g. water hardness, atmospheric agents, system limiting, etc.The published data refers to new products correctly installed and used, in accordance with local regulations. N.B. we recommend regular periodic maintenance of the appliance.

NEW

NEW

NEW

• 3 mono-phase versions

• Hot/cold reversible functioning

• Combinable with external storage tank

• Combinable with gas heating boiler

• Inverter rotary compressor

• Electronic thermal expansion valve

• Equipped with modulating fan

• R410A refrigerant gas

• Weekly thermostat for hot/cold functioning (optional)

HE

AT

PU

MP

S

HE

AT

PU

MP

S

AUDAXAir/water inverter mono-phase heat pumps

HYDRAULIC KITS

Type Code

Wall mounting brackets for AUDAX 6-8 kW 3.022154

Connection kit with anti-vibration flexible pipes and shut-off knobs 3.021526

Distribution manifold kit for 2 mixed zones 3.021527

Distribution manifold kit for 1 mixed zone 3.021528

Sanitary priority 3-way valve kit 3.020633

12 litre system expansion vessel kit 3.011679

Integration electric resistance kit for AUDAX 3.021525

Additional 5 kW electric resistance kit for UB 1000-1500 3.020862

Additional 3 kW electric resistance kit for UB 200-300-500 3.020861

Dehumidifier kit 3.021529

Dehumidifier back frame kit 3.022146

Dehumidifier front grille kit 3.022147

Model Dimensions(H x W x P) mm

Empty appliance weight kg

6 kW 864 x 950 x 413 84

8 kW 864 x 950 x 413 92

10 kW 1382 x 1160 x 401 122

Data referred to the following conditions: heating air/water temperature 7°/6°/30°/35° cooling air/water temperature 35°/24°/23°/18°

NB: The technical data are not definitive and may be subject to change.

Model Code Heating output kW

Cooling output kW

COP(heating)

EER(cooling)

Supply tension Refrigerant gas

AUDAX 6 kW 3.021457 6,0 6,0 3,95 4,30 Mono-phase 230V R410A



nEW

System integrator

Electronic control with microprocessor for the management of integrated systems. It can manage complex systems, for example a boiler, a heat pump and a solar thermal system; the integrator makes an economic convenience calculation, deciding whether to activate the boiler or the heat pump according to the respective efficiency parameters. In particular, the system integrator can calculate the COP (Coefficient of Performance) of the heat pump and compare it to a minimum value of functional convenience. In order to make such evaluations, it acquires a series of inlet parameters, among which the external temperature and the system inlet set temperature.

Electronic control for the management of integrated systems

THERMOREGULATING KITS

Main grid

1

2

3

4

5

6

7

8

KeySystem controllerHERCULES Solar 26 AUDAX heat pumpFlat-plate collectorsDehumidifier wall recessed Photovoltaic modulesInverter3-way diverter valve

Integrated system with AUDAX and HERCULES Solar 26

Type Code

System controller 3.021522

System controller expansion kit 3.021547

Type Code

Weekly thermostat for hot/cold functioning 3.021521

Zone controller 3.021523

Temperature/humidity active sensor kit 3.021524

12345678

76

• Heat output of 111 kW

• High efficiency and low pollutant emissions thanks to condensingtechnology

• Modulating heat output from 25 to 100%

• Possible indoor or outdoor installation

• Double NTC probe for optimum temperature control

• Electronic control board microprocessor driven

• Electronic ignition and modulation

• Possibility of installation in cascade (up to 8 appliances)

• Hydraulic options and flue systems for cascade installations(up to 3 appliances)

• Possibility to connect a separate storage tank unit

• Standard frost protection up to -5 °C












LIG

HT

CO

MM

ER

CIA

L

LIG

HT

CO

MM

ER

CIA

L

VICTRIX 115 VICTRIX 90Wall-hung modular condensing boiler for heating only Wall-hung modular condensing boiler for heating only

Dimensions(H x W x P) mm


1010 x 600 x 610 105,5



1010 x 600 x 610 97,5

The price of VICTRIX 115 boiler does not include the “Green Series” flue kit, to be ordered separately. The price of VICTRIX 90 boiler does not include the “Green Series” flue kit, to be ordered separately.

For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only. For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.

MAIN FLUE KITS MAIN FLUE KITS

MAIN OPTIONS MAIN OPTIONS

Type Code

Terminal horizontal outlet kit Ø 80 3.015255

Terminal vertical outlet kit Ø 80 3.015256

Type Code



Type Code

External probe 3.015266

Cascade and zones regulator 3.015244

Zone manager 3.015264

Type Code


Cascade and zones regulator 3.015244

Zone manager 3.015264

Model CodeN.G.L.P.G.

Heat outputkW

Efficiency at nominal heat output

Protectionindex

80-60 °C 50-30 °C 40-30 °C

VICTRIX 115 1 I 3.0204263.020426GPL 111,0 98,4% 106,8% 108,7% IPX5D


Heat outputkW


Protectionindex

80-60 °C 50-30 °C 40-30 °C

VICTRIX 90 1 l 3.0204253.020425GPL 90,0 97,5% 106,0% 108,7% IPX5D

For the complete list of the option kits and of the flue system kits for VICTRIX 115 boiler see the second section of the catalogue. For the complete list of the option kits and of the flue system kits for VICTRIX 90 boiler see the second section of the catalogue.

98

• Heat output of 72,6 kW






















LIG

HT

CO

MM

ER

CIA

L

LIG

HT

CO

MM

ER

CIA

L

VICTRIX 75 VICTRIX 50Wall-hung modular condensing boiler for heating only Wall-hung modular condensing boiler for heating only



950 x 600 x 525 68,0



950 x 600 x 525 63,0

The price of VICTRIX 75 boiler does not include the “Green Series” flue kit, to be ordered separately. The price of VICTRIX 50 boiler does not include the “Green Series” flue kit, to be ordered separately.

For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only. For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.



Type Code



Horizontal concentric kit Ø 80/125 3.015242

Type Code




Type Code


Three-way valve kit 3.015223

Hydraulic manifold kit 3.015224

Type Code


Three-way valve kit 3.015223

Hydraulic manifold kit 3.015224


Heat outputkW


Protectionindex

80-60 °C 50-30 °C 40-30 °C

VICTRIX 75 3.0185113.018511GPL 72,6 97,3% 104,5% 107,0% IPX5D


Heat outputkW


Protectionindex

80-60 °C 50-30 °C 40-30 °C

VICTRIX 50 3.0163593.016359GPL 50,0 98,5% 106,0% 107,0% IPX5D

For the complete list of the option kits and of the flue system kits for VICTRIX 75 boiler see the second section of the catalogue. For the complete list of the option kits and of the flue system kits for VICTRIX 50 boiler see the second section of the catalogue.

1110

• Heat outputs of 26 and 32 kW

• Wide liquid crystal backlit display


• Heat exchanger with high circulation

• 3 star marking of sanitary comfort

• Stainless steel storage tank with capacity of 54 litres

• Stainless steel condensing module


• Modulating system pump

• Adjustable system by-pass

• Optimum seasonal performances thanks to thermoregulationoptions such as Super CAR, CARV2 and external probe






• Control panel with handy digital display and traditional knobs




• Optional connection group

• Optimum seasonal performances thanks to thermoregulationoptions such as CARV2, CAR Universal and external probe


WA

LL-H

UN

G C

ON

DE

NS

ING

WA

LL-H

UN

G C

ON

DE

NS

ING

VICTRIX Zeus Superior kW VICTRIX ZeusWall-hung condensing boiler with built-in stainless steel storage tank of 54 litres

Wall-hung condensing boiler with built-in stainless steel storage tank of 45 litres


Heat output kW Storagetankcapacity


Protectionindex

D.H.W. production(∆t 30 °C)

First ContinuousC.H. D.H.W. 80-60 °C 40-30 °C 10 min service

VICTRIX Zeus26 1 I

3.0203193.020319GPL 23,6 26,0 45 litres 96,9% 107,5% IPX4D 156 litres 12,4 l/min




Sanitarycomfort(EN 13203-1)

Protectionindex



VICTRIX ZeusSuperior 26 kW


VICTRIX ZeusSuperior 32 kW


The price of VICTRIX Zeus 26 boiler does not include the “Green Series” flue kit, to be ordered separately.

The price of VICTRIX Zeus Superior kW boilers do not include the “Green Series” flue kit, to be ordered separately.

For the complete list of the option kits and of the flue system kits for VICTRIX Zeus Superior kW boiler see the second section of the catalogue.

For the complete list of the option kits and of the flue system kits for VICTRIX Zeus 26 boiler see the second section of the catalogue.

For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.


MAIN FLUE KITS

MAIN FLUE KITS

MAIN OPTIONS

MAIN OPTIONS

Type Code

Horizontal concentric complete kit Ø 60/100 3.012000

Concentric vertical complete kit Ø 60/100 3.018501

Twin pipes complete kit Ø 80/80 3.012002Type Code



Twin pipes complete kit Ø 80/80 3.012002

Type Code

CARV2 (modulating remote control) 3.021395


Connection kit 3.020505Type Code

Super CAR (modulating remote control) 3.016577


Relay board kit 3.015350



26 kW 900 x 600 x 466 70,1

32 kW 900 x 600 x 466 72,8



870 x 580 x 380 61,3

1312







• “Aqua Celeris” patented system



• Optimum D.H.W. performances thanks to the flow regulator








• Pre-arranged for connection to Immerstor range







WA

LL-H

UN

G C

ON

DE

NS

ING

WA

LL-H

UN

G C

ON

DE

NS

ING

VICTRIX Superior kW VICTRIX Superior kW XWall-hung combi condensing boiler with “Aqua Celeris” Wall-hung condensing boiler for heating only


Heat output kW



Protectionindex

D.H.W.production(∆t 30 °C)

80-60 °C 40-30 °C

VICTRIX Superior32 kW

3.0191033.019103GPL 32,0 98,0% 105,7% IPX5D 15,3 l/min


Heat output kW


Protectionindex

80-60 °C 40-30 °C

VICTRIX Superior32 kW X

3.0191043.019104GPL 32,0 98,0% 105,7% IPX5D

The price of VICTRIX Superior 32 kW X boiler does not include the “Green Series” flue kit, to be ordered separately.The price of VICTRIX Superior 32 kW boiler does not include the “Green Series” flue kit, to be ordered separately.

For the complete list of the option kits and of the flue system kits for VICTRIX Superior 32 kW boiler see the second section of the catalogue.

For the complete list of the option kits and of the flue system kits for VICTRIX Superior 32 kW X boiler see the second section of the catalogue.

For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.

MAIN FLUE KITSMAIN FLUE KITS

MAIN OPTIONSMAIN OPTIONS

Type Code




Type Code




Type Code



Storage tank connection kit 3.019213

Type Code



Relay board kit 3.015350

Solar valve 3.018911



830 x 440 x 350 47,5



800 x 440 x 350 53,5

1514




• Control panel with digital display

• Compact dimensions

• Light weight

• Automatic system by-pass




• Optimum seasonal performances thanks to thermoregulationoptions such as CARV2 and external probe









• Possibility to connect the boiler to Immerstor range

• Optimum seasonal performances thanks to thermoregulationoptions such as CARV2, CAR Universal and external probe



VICTRIX VICTRIX XWall-hung compact combi condensing boiler Wall-hung compact condensing boiler for heating only


Heat output kW Efficiency at nominal heat output

Protectionindex

D.H.W.production(∆t 30 °C)

C.H. D.H.W. 80-60 °C 40-30 °C

VICTRIX 26 2 I 3.0221083.022108GPL 23,6 26,0 97,8% 108,1% IPX4D 12,4 l/min

The price of VICTRIX 26 boilers do not include the “Green Series” flue kit, to be ordered separately.

For the complete list of the option kits and of the flue system kits for VICTRIX 26 boiler see the second section of the catalogue.

For the complete list of the option kits and of the flue system kits for VICTRIX X boiler see the second section of the catalogue.


MAIN FLUE KITS

Type Code




The price of VICTRIX X boiler does not include the “Green Series” flue kit, to be ordered separately.


MAIN FLUE KITS

MAIN OPTIONS

Type Code




Type Code



Connection kit 3.017495


WA

LL-H

UN

G C

ON

DE

NS

ING

WA

LL-H

UN

G C

ON

DE

NS

ING



780 x 440 x 250 39,0

MAIN OPTIONS

Type Code





Solar probe kit 3.021452



X 24 738 x 440 x 250 37,6

X 12 738 x 440 x 250 36,5


Heat output kW Efficiency at nominal heat output

Protectionindex

C.H. D.H.W. 80-60 °C 40-30 °C

VICTRIX X 24 2 I 3.0221093.022109GPL 23,6 26,0 97,8% 108,1% IPX4D

VICTRIX X 12 2 I 3.0221103.022110GPL 12,0 12,0 97,7% 107,0% IPX4D

1716


• High efficiency and low pollutant emissions thanks to condensing technology

• Designed for open heating systems





• Optimum seasonal performances thanks to thermoregulation options such as CARV2, CAR Universal and external probe


VICTRIX RWall-hung heating only condensing boiler, for open heating systems

The price of VICTRIX R boilers do not include the “Green Series” flue kit, to be ordered separately.


MAIN FLUE KITS

Type Code




WA

LL-H

UN

G C

ON

DE

NS

ING



738 x 440 x 250 45,0

MAIN OPTIONS

Type Code



For the complete list of the option kits and of the flue system kits for VICTRIX R boiler see the second section of the catalogue.


• Designed for high temperature heating systems

• Pre-arranged for functioning in multi-zone heating systems

• Control board equipped with functional knobs



• Optimum seasonal performances thanks to thermoregulation options such as CARV2, CAR Universal and external probe

EOLO Extra kW HPWall-hung combi condensing boiler for outdoor installation, for high temperature systems


Heat output kW


Protectionindex

Frostprotection


C.H. D.H.W.

EOLO Extra 24 kW HP

3.0210373.021037GPL 24,0 24,0 97,3% IPX5D - 5 °C 11,5 l/min

EOLO Extra 30 kW HP

3.0210383.021038GPL 30,0 30,0 96,4% IPX5D - 5 °C 14,3 l/min

The price of EOLO Extra kW HP boilers do not include the “Green Series” flue kit, to be ordered separately.

For the complete list of the option kits and of the flue system kits for EOLO Extra kW HP boiler see the second section of the catalogue.


MAIN FLUE KITS

MAIN OPTIONS

Type Code




Type Code




Anti-freeze protection (-15 °C) 3.017324



24 kW HP 710 x 520 x 250 35,0

30 kW HP 710 x 520 x 250 45,0

WA

LL-H

UN

G C

ON

DE

NS

ING


Heat output kW


Protectionindex

Frost protection

80-60 °C 40-30 °C

VICTRIX R 24 3.0191433.019143GPL 24,0 98,7% 107,7% IPX4D -5 °C

1918



• High efficiency and low pollutant emissions thanksto condensing technology

• Stainless steel storage tank with capacity of 120 litresprearranged for solar panels connection


• Prearranged for zone systems and high/low temperature systems

• Modulating heating pumps with low power consumption

• ABT version factory fitted for mixed temperature systems



• High efficiency and low pollutant emissions thanksto condensing technology


• Solar circuit included



• Pre-arranged for functioning in high/low temperature heating systems

• Pre-arranged for functioning in multi-zone heating systems

• Modulating heating pumps with low power consumption

• Optimum seasonal performances thanks to thermoregulation options such as Super CAR, CARV2 and external probe

FLO

OR

-STA

ND

ING

CO

ND

EN

SIN

G S

OLA

R S

YS

TE

M R

EA

DY

FLO

OR

-STA

ND

ING

CO

ND

EN

SIN

G

HERCULES Condensing HERCULES SolarFloor-standing condensing boiler with built-in stainless steel storage tank of 120 litres

Floor-standing condensing boiler with built-in stainless steel storage tank of 200 litres, solar system ready




Protectionindex



HERCULES Solar 26 1A


The price of HERCULES Solar 26 boilers do not include the “Green Series” flue kit, to be ordered separately.

For the complete list of the option kits and of the flue system kits for HERCULES Condensing boilers see the second section of the catalogue.

For the complete list of the option kits and of the flue system kits for HERCULES Solar 26 boiler see the second section of the catalogue.


MAIN FLUE KITS

MAIN OPTIONS

Type Code




Type Code




Solar connection kit 3.021382

Low temperature second zone kit 3.018836

High temperature second zone kit 3.018837

2 high temperature zones kit 3.018838

2 low temperature zones kit 3.020003



26 1600 x 600 x 600 126,6

32 1600 x 600 x 600 127,9

ABT 32 1600 x 600 x 600 130,1

The price of HERCULES Condensing boilers do not include the “Green Series” flue kit, to be ordered separately.


MAIN FLUE KITS

MAIN OPTIONS

Type Code




Type Code



Low temperature second zone kit 3.018836

High temperature second zone kit 3.018837

2 high temperature zones kit 3.018838

2 low temperature zones kit 3.020003

Additional low temperature zone kit for ABT version 3.018839




Protectionindex



HERCULESCondensing 26 2 E


HERCULESCondensing 32 2 I


HERCULESCondensing ABT 32 2 I




1970 x 600 x 750 193,8

NEW

2120

• Sealed chamber fan assisted models with heat outputs of 24, 28 and 32 kW

• Integrated stainless steel storage tank with capacity of 60 litres



• 2 litre sanitary expansion vessel


• Self-adaptable fan





WA

LL-H

UN

G T

RA

DIT

ION

AL

WA

LL-H

UN

G T

RA

DIT

ION

AL

ZEUS Superior kWWall-hung traditional boiler with built-in stainless steel storage tank of 60 litres

For the complete list of the option kits and of the flue system kits for ZEUS Superior kW boilers see the second section of the catalogue. For the complete list of the option kits and of the flue system kits for AVIO kW and ZEUS kW boilers see the second section of the catalogue.



24 kW 900 x 600 x 450 66,1

28 kW 900 x 600 x 450 68,0

32 kW 900 x 600 x 450 70,2



AVIO 24 kW 900 x 580 x 380 50,0

ZEUS 24 kW 890 x 580 x 380 54,0

ZEUS 28 kW 890 x 580 x 380 58,0

The price of ZEUS Superior kW boilers do not include the “Blue Series” flue kit, to be ordered separately. The price of ZEUS kW boilers does not include the ”Blue Series” flue kit, to be ordered separately.

For good performance and safe operation use Immergas “Blue Series” pipes and terminal flue outlet only. For good performance and safe operation use Immergas “Blue Series” pipes and terminal flue outlet only.



Type Code



Type Code



Type Code



Additional system expansion vessel 3.018433

Type Code



D.H.W. expansion vessel 3.017744


Heat output kW

Storagetankcapacity



Protectionindex


First Continuous10 min service

ZEUS Superior 24 kW 3.0185083.018508GPL 24,0 60 litres 93,7% IPX5D 153 litres 11,5 l/min




Heat output kW

Storagetankcapacity


Open chamber conventional flue

Sealed chamberfan assisted

Protectionindex


First Continuous10 min service

AVIO 24 kW 3.0185053.018505GPL 23,7 45 litres 90,4% • IPX4D 135 litres 11,3 l/min

ZEUS 24 kW 3.0185063.018506GPL 24,0 45 litres 94,1% • IPX4D 135 litres 11,5 l/min

ZEUS 28 kW 3.0185073.018507GPL 28,0 45 litres 93,9% • IPX4D 145 litres 13,4 l/min


• Open chamber conventional flue model (AVIO) or sealed chamberfan assisted models (ZEUS)

• Integrated stainless steel storage tank with capacity of 45 litres





• Optimum seasonal performances thanks to thermoregulatingoptions such as CARV2, CAR Universal and external probe


AVIO/ZEUS kWWall-hung traditional boiler with built-in stainless steel storage tank of 45 litres

2322

• Sealed chamber fan assisted models with heat outputs of 24, 28 and 32 kW

• New modern design

• “Aqua Celeris” patented system

• Approved for indoor and outdoor installation in partiallyprotected areas




• Optimum seasonal performances thanks to thermoregulatingoptions such as CARV2, CAR Universal and external probe



WA

LL-H

UN

G T

RA

DIT

ION

AL

WA

LL-H

UN

G T

RA

DIT

ION

AL

MAIOR EOLOWall-hung combi traditional boiler with “Aqua Celeris”

For the complete list of the option kits and of the flue system kits for MAIOR EOLO boilers see the second section of the catalogue.

For the complete list of the option kits for NIKE Mini 28 kW Special boiler see the second section of the catalogue.



24 751 x 440 x 340 41,5

28 751 x 440 x 340 41,9

32 751 x 440 x 340 42,4



740 x 450 x 310 31,0

The price of MAIOR EOLO boilers does not include the “Blue Series” flue kit, to be ordered separately.

For good performance and safe operation use Immergas “Blue Series” pipes and terminal flue outlet only.

MAIN FLUE KITS

MAIN OPTIONS

MAIN OPTIONS

Type Code



Type Code





Solar probe kit 3.021452

Type Code






Heat output kW



Protectionindex


MAIOR EOLO 24 4 E

3.0209223.020922GPL 24,0 93,0% • IPX5D 11,5 l/min

MAIOR EOLO 28 4 E

3.0209233.020923GPL 28,0 94,3% • IPX5D 13,4 l/min

MAIOR EOLO 32 4 E

3.0209243.020924GPL 32,0 93,5% • IPX5D 15,3 l/min

• Open chamber conventional flue model with heat output of 28 kW


• Functioning information and diagnostic by LED



• Compact hydraulic group with automatic system by-pass

• Domestic hot water stainless steel heat exchanger

• Possible connection to CARV2, CAR Universal and external probe



NIKE Mini 28 kW SpecialWall-hung combi traditional boiler open chamber and conventional flue


Heat output kW



Protectionindex


NIKE Mini 28 kW Special

3.0189213.018921GPL 27,9 90,3% • IPX4D 13,3 l/min

2524

WA

LL-H

UN

G T

RA

DIT

ION

AL

WA

LL-H

UN

G T

RA

DIT

ION

AL


• Open chamber conventional flue models (NIKE) or sealed chamberfan assisted models (EOLO)

• New modern design and compact dimensions

• Digital display



• Pre-arranged for connection to Immerstor range

• Adjustable by-pass




MINI NIKE/EOLO XWall-hung compact traditional boiler for heating only

For the complete list of the option kits and of the flue system kits for MINI NIKE/EOLO X boilers see the second section of the catalogue.



NIKE X 24 755 x 440 x 240 25,5

EOLO X 24 751 x 440 x 240 31,4

The price of MINI EOLO X 24 boiler do not include the “Blue Series” flue kit, to be ordered separately.


MAIN FLUE KITS (only for EOLO model)

MAIN OPTIONS

Type Code



Type Code





Heat output kW




Protectionindex

MINI NIKE X 24 3 E 3.0208573.020857GPL 23,8 91,0% • IPX4D

MINI EOLO X 24 3 E 3.0208553.020855GPL 24,0 93,6% • IPX5D


• Open chamber conventional flue model (NIKE) or sealed chamberfan assisted models (EOLO)

• New modern design and compact dimensions

• Digital display



• Compact hydraulic group with adjustable system by-pass

• Domestic hot water stainless steel heat exchanger




MINI NIKE/EOLOWall-hung compact combi traditional boiler

For the complete list of the option kits and of the flue system kits for MINI NIKE/EOLO boilers see the second section of the catalogue.



NIKE 24 755 x 440 x 240 26,1

EOLO 24 751 x 440 x 240 32,0

EOLO 28 751 x 440 x 340 38,0

The price of MINI EOLO boilers do not include the “Blue Series” flue kit, to be ordered separately.


MAIN FLUE KITS

MAIN OPTIONS

Type Code



Type Code


Connection kit for 24 kW model 3.015229


Anti-scale kit 3.016305



Heat output kW

Efficiency at nominalheat output



Protectionindex


MINI NIKE 24 3 E 3.0208523.020852GPL 23,8 91,0% • IPX4D 11,4 l/min

MINI EOLO 24 3 E 3.0208533.020853GPL 24,0 93,6% • IPX5D 11,5 l/min

MINI EOLO 28 3 E 3.0208563.020856GPL 28,0 94,3% • IPX5D 13,4 l/min

2726

WA

LL-H

UN

G T

RA

DIT

ION

AL

WA

LL-H

UN

G T

RA

DIT

ION

AL

For the complete list of the option kits and of the flue system kits for Star boilers see the second section of the catalogue.



NIKE Star 24 751 x 440 x 240 24,6

EOLO Star 24 756 x 440 x 240 29,0

The price of EOLO Star boilers do not include the ”Blue Series” flue kit, to be ordered separately.


* This remote control is combinable esclusively with single zone systems.

MAIN FLUE KITS

MAIN OPTIONS

Type Code



Type Code

Mini CRD (Mini Digital Remote Control)* 3.020167




Heat output kW




Protectionindex


NIKE Star 24 3 E 3.0194793.019479GPL 23,6 91,1% • IPX4D 11,3 l/min

EOLO Star 24 3 E 3.0194803.019480GPL 23,8 93,4% • IPX5D 11,4 l/min

• Open chamber conventional flue model (NIKE) and sealed chamberfan assisted model (EOLO), both with heat output of 24 kW


• Digital display

• Bithermal heat exchanger for heating and fast domestic hot waterproduction

• Adjustable by-pass




• Possible connection to CARV2, CAR Universal and Mini CRD(Mini Digital Remote Control)


NIKE/EOLO StarWall-hung combi traditional boiler with bithermal heat exchanger

For the complete list of the option kits and of the flue system kits for EOLO Extra kW boilers see the second section of the catalogue.



24 kW 730 x 440 x 240 43,5

28 kW 730 x 520 x 250 44,0

32 kW 730 x 520 x 250 44,5


Heat output kW



Protectionindex


EOLO Extra 24 kW 3.0189253.018925GPL 24,0 92,8% • IPX5D 11,5 l/min



• Sealed room fan assisted models with 24, 28 and 32 kWheat outputs

• Amico Remote Control as standard

• Installable outdoors in open spaces thanks to the optional cover kit





• Connectable to the optional external probe



EOLO Extra kWWall-hung combi traditional boiler for outdoor installation

The price of EOLO Extra kW boilers does not include the “Blue Series” flue kit, to be ordered separately.


MAIN FLUE KITS

MAIN OPTIONS

Type Code



Type Code



Connection kit for 28/32 kW model 3.019329

Cover kit for 24 kW model 3.016304

Cover kit for 28/32 kW model 3.016022

2928

• Heat outputs of 20,1 kW (JULIUS 11) and 24,4 kW (JULIUS 14)

• New essential design

• Modulating gas valve

• Battery-run electronic ignition

• Chimney safety device

CO

Mb

I W

AT

ER

HE

AT

ER

S

CO

Mb

I W

AT

ER

HE

AT

ER

S

JULIUSWall-hung combi water heater open chamber and conventional flue



CAESAR 14 630 x 375 x 250 22,0

Super CAESAR 17 630 x 420 x 250 23,0



11 630 x 350 x 230 11,1

14 630 x 350 x 230 13,0

The price of CAESAR water heaters does not include the “Blue Series” flue kit, to be ordered separately.


MAIN FLUE KITS

Type Code



Horizontal outlet fan assisted Ø 80 3.011279


Heat output kW


Batteryelectronicignition

Flamemodulation


JULIUS 11 3 E 3.0220083.022008GPL 20,1 • • • 11,5 l/min

JULIUS 14 3 E 3.0220093.022009GPL 24,4 • • • 14,0 l/min


Heat output kW

Sealedchamber fanassisted

Electronicignition

Flamemodulation


CAESAR 14 3 E 3.0220103.022010GPL 24,4 • • • 14,0 l/min

Super CAESAR 17 3 E 3.0220113.022011GPL 29,8 • • • 17,0 l/min

• Heat outputs of 24,4 kW (CAESAR 14) and 29,8 kW (SuperCAESAR 17)

• New control panel with LCD display

• Possible installation indoors or outdoors in partially protected areas



• Optional frost protection up to -15 °C

CAESAR 14Super CAESAR 17Wall-hung combi water heaters sealed chamber and fan assisted

nEW nEW

MAIN OPTIONS

Type Code


Gas pressure regulation kit 3.014607

90° gas valve 3.014145

MAIN OPTIONS

Type Code


-15 °C anti-freeze protection 3.014113

90° gas valve 3.014145

Thermostatic mixing valve 3.019099

3130

• Stainless steel storage tank units with capacity of 80, 120 and 200 litres

• New design

• Pre-arranged for D.H.W. recirculation

• UB Inox 120-2 and UB Inox 200-2 models pre-arranged for solar panels connection and for solar unit

• Inspection flange

• D.H.W. expansion vessel fitted as standard

• Built-in NTC probe

• Less heat losses thanks to improved insulation

• Solar unit standard fitted on the UB Inox Solar 200-2

MU

LTI

SY

ST

EM

DIS

TR

IbU

TIO

N M

AN

IFO

LDS

ST

OR

AG

E T

AN

KS

IMMERSTORStainless steel storage tanks

Model Description Code

DIMV2 BASICKit for system requiring high water flow rates

Hydraulic manifold and 1 pump 3.020536

DIMV2 2 ZONESKit for 2 zone systems Hydraulic manifold, 2 pumps and electronic board 3.021465

DIMV2 3 ZONESKit for 3 zone systems Hydraulic manifold, 3 pumps and electronic board 3.021466

DIMV2 H-LTKit for mixed systems with 1 low temperature zone and 1 high temperature zone

Hydraulic manifold, 2 pumps, 1 mixing valve and electronic board 3.021467

DIMV2 H-2LTKit for mixed systems with 2 low temperature zones and 1 high temperature zone

Hydraulic manifold, 3 pumps, 1 mixing valve and electronic board 3.021468

Model Code Capacitylitres

Height(mm)

Width(mm)

Depth(mm)

Expansion vesselcapacitylitres

8 bar safety valve

UB Inox 80-2 3.022012 80 850 550 550 4 •

UB Inox 120-2 3.022013 120 850 650 650 5 •

UB Inox 200-2 3.022014 200 1250 650 650 8 •

UB Inox Solar 200-2 3.022015 200 1250 600 600 8 •

• Kits for the management of heating systems divided into differentzones, heating systems with high/low temperature and heatingsystems with high flow rates

• Available in 5 different models

• Equipped with 3 speed traditional pumps

• No-return valve for each zone

• Easy recessed installation (19 cm deep only) or wall-hung

• Possible setting of the mixed zones (H-LT versions) up to 75 °C

• Pump locking by SILENT BLOCK system for a bettersilent functioning

DIMV2Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows

MAIN OPTIONS

Type Code


By-pass for low temperature zones DIMV2 H-LT and DIMV2 H-2LT 3.021469

Low temperature zones safety kit 3.013794

Shut-off knobs 3.014948

nEWModel Dimensions

(H x W x P) mmEmpty appliance weight kg

BASIC 700 x 450 x 190 12,5

2 ZONES 700 x 450 x 190 17,3

3 ZONES 700 x 450 x 190 19,8

H-LT 700 x 450 x 190 19,7

H-2LT 700 x 450 x 190 23,2

MAIN OPTIONS

Type Code

Solar unit for UB Inox 120-2 and 200-2 3.019097

Electronic anode 3.020344

Solar panel connection kit for UB Inox 200-2 3.022195

Solar panel connection kit for UB Inox 200-2 in parallel 3.022196

Solar panel connection kit for UB Inox 120-2 3.022197

Connection kit for UB Inox 200-2 in parallel 3.022212

UB Inox 80-2 recirculation kit 3.022198

UB Inox 120-2 and 200-2 recirculation kit 3.022199

UB Inox Solar 200-2 recirculation kit 3.022200

UB Inox 200-2 in parallel recirculation kit 3.022201

NEW

NEW

NEW

NEW

NEW

NEW

NEW

NEW

INTEGRATED SOLUTION – stainless steel storage tank and solar circuit included

3332

• Kits for the management of heating systems divided in differentzones, heating systems with high/low temperature and heatingsystems with high flow rates

• Available in 5 different models

• Energy saving thanks to modulating type low electricconsumption class A pumps

• No-return valve for each zone

• Easy recessed installation (19 cm deep only) or wall-hung

• Possible setting of the mixed zones (H-LT versions) up to 75 °C

“GR

EE

N S

ER

IES

” FL

UE

SY

ST

EM

S

MU

LTI

SY

ST

EM

DIS

TR

IbU

TIO

N M

AN

IFO

LDS

DIMV2 TOPMultisystem distribution manifolds for the management of zone systems and systems requiring great water flows. High energetic efficiency thanks to class A pumps

Model Description Code

DIMV2 TOP 2 ZONESKit for 2 zone systems Hydraulic manifold, 2 low consumption pumps and electronic board 3.020534

DIMV2 TOP 3 ZONESKit for 3 zone systems Hydraulic manifold, 3 low consumption pumps and electronic board 3.020499

DIMV2 TOP H-LTKit for mixed systems with 1 low temperature zone and 1 high temperature zone

Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board 3.020521

DIMV2 TOP H-2LTKit for mixed systems with 2 low temperature zones and 1 high temperature zone

Hydraulic manifold, 3 low consumption pumps, 1 mixing valve and electronic board 3.020361

MAIN OPTIONS

Type Code


Low temperature zones safety kit 3.013794

Shut-off knobs 3.014948

Description Open chamber fan assisted installation (B23 type) Code

Horizontal kit Ø 80 (to discharge in the chimney) 3.015254

Terminal horizontal outlet kit Ø 80(to discharge horizontally) 3.015255


4 extension pipes Ø 80 kit 0,5 m long 3.014642

4 extension pipes Ø 80 kit 1 m long 3.012088

1 extension pipe Ø 80 2 m long 3.016837

4 x 90° bends Ø 80 kit 3.012091

45° bend Ø 80 kit 3.012092

“Green Series” flue systems

All light commercial VICTRIX models are standard provided in B23 configuration (open chamber, fan assisted) but they can work also as sealed chamber fan assisted (C type) using the special kits supplied by Immergas. To correctly install the boiler, it is necessary to use the original Immergas “Green Series” flue systems; these components and accessories are specially designed to guarantee higher resistance to corrosion and fast and easy installation, thanks also to the push-fit assembly and special gasket seals.

VICTRIX 50/75/90/115 FLUE SYSTEMS

Flue components for condensing boilers



2 ZONES 700 x 450 x 190 17,3

3 ZONES 700 x 450 x 190 19,8

H-LT 700 x 450 x 190 19,7

H-2LT 700 x 450 x 190 23,2

3534

Description Sealed chamber fan assisted installation (C type) Code


Vertical concentric kit Ø 80/125 3.015243

Flashing kit Ø 80/125 for flat roof 3.015249

Extension pipe kit Ø 80/125 2 m long 3.015246


87° bend kit Ø 80/125 3.015247

2 x 45° bend kit Ø 80/125 3.015248

“GR

EE

N S

ER

IES

” FL

UE

SY

ST

EM

S

“GR

EE

N S

ER

IES

” FL

UE

SY

ST

EM

S

In case of cascade systems in B23 configuration (open chamber, fan assisted), it is necessary to use a special flue manifold with a non-return device (flue locks) supplied by Immergas, so that the combustion products of one working boiler do not interfere with the combustion circuit of the not working boilers.

Description Code

Exhaust manifold kit with flue lock Ø 200 with adapterfor the additional boiler

For VICTRIX 115

3.020954

Exhaust manifold kit with flue locks Ø 125 for 2 boilersin cascade (including a condense draining siphon)

For VICTRIX 50

3.015240

Exhaust manifold kit with flue locks Ø 160 for 2 boilersin cascade (including a condense draining siphon)

For VICTRIX 75/90/115

3.020476

Exhaust manifold kit with flue lock Ø 125for the additional boiler

For VICTRIX 50

3.015241

Exhaust manifold kit with flue lock Ø 160for the additional boiler

For VICTRIX 75/90

3.020701

Extension pipe Ø 125 kit 0,5 m long for flue manifold

For VICTRIX 503.016370

Extension pipe Ø 125 kit 1 m long for flue manifold


Extension pipe Ø 125 kit 2 m long for flue manifold


90° bend kit Ø 125 mm for flue manifold


2 x 45° bend kit Ø 125 mm for flue manifold


Adapter Ø 125/160 for flue manifold


FLUE SYSTEMS FOR VICTRIX 50/75/90/115 CASCADE INSTALLATION

Description Code

Gasket kit Ø 80 (10 pcs.) 3.015343

Gasket kit Ø 110 3.015344

Gasket kit Ø 125 3.015345

GASKET KITS FOR VICTRIX 50/75/90/115 FLUE SYSTEMS

3736

Description Code

Concentric horizontal complete kit Ø 60/100 3.012000

Concentric vertical complete kit Ø 60/100 (red ocher colour) 3.016833

Concentric vertical complete kit Ø 60/100 (black colour) 3.018501

Concentric horizontal outlet Ø 60/100 3.016836

Flanged stub-pipe kit Ø 60/100 3.012086


Extension pipe kit Ø 60/100 0,5 m long 3.014643

90° bend Ø 60/100 kit 3.012093

90° bend Ø 60/100 kit with inspection hole 3.016174

45° bend Ø 60/100 kit 3.012095

10 gasket kit Ø 60 (5 bend gaskets and 5 extension gaskets) 3.015376

Gasket kit for flange Ø 60/100 3.015379

Description Code

Twin pipes complete kit 3.012002


Anti-wind vertical terminal kit Ø 80 3.021721

Horizontal outlet terminal Ø 80 3.016363

Flanged stub-pipe Ø 80 for flue discharge 3.016364

Flanged stub-pipe kit Ø 80 3.012087

Flanged stub-pipe + bend + extension pipe Ø 80for flue discharge 3.016365

4 extension pipes Ø 80 kit 0,5 m long 3.014642

4 extension pipes Ø 80 kit 1 m long 3.012088


4 x 90° bends Ø 80 kit 3.012091

45° bend Ø 80 kit 3.012092

10 gasket kit Ø 80 (5 bend gaskets and 5 extension gaskets) 3.015378

“GR

EE

N S

ER

IES

” FL

UE

SY

ST

EM

S

“GR

EE

N S

ER

IES

” FL

UE

SY

ST

EM

S

The “Green Series” kits are exclusively made for condensing boilers and they are manufactured in PPS in order to guarantee high resistance to corrosion and allow quick and functional installation, thanks also to the simple coupling system adopted and to the use of special seals. To ensure correct installation of Immergas condensing boilers, the air inlet/flue outlet pipes kit must be selected from the Immergas “Green Series” shown here. These components - except for the C6 type - are provided and guaranteed by the boiler’s constructor.

FLUE SYSTEM FOR CONDENSING bOILERS < 35 kW Ø 60/100 FLUE SYSTEM FOR CONDENSING bOILERS < 35 kW Ø 80/80

Description Code

Cover kit for VICTRIX 26, VICTRIX X 24/X 12 3.017330

Cover kit for VICTRIX Superior 32 kW/32 kW X 3.017209

Cover kit for EOLO Extra kW HP 3.016022

COVER KITS

Description Code

HERCULES Condensing B22/B23 terminal kit 3.020004

ADDITIONAL KITS

3938

“GR

EE

N S

ER

IES

” Fl

uE

Sy

St

Em

S

“GR

EE

N S

ER

IES

” Fl

uE

Sy

St

Em

S

Ø 60 mm ducting systemFor condensing boilers of rated power lower than 35 kW (except EOLO Extra kW HP)

The Immergas Ø 60 mm ducting system can be used only with Immergas condensing boilers.Thanks to its particularly small diameter, the system can be routed without difficulty through already existing narrow chimney stacks, with the advantage that the installation of a gas fired system can be completed with remarkable simplicity and maximum efficiency.The system is installed by assembling all the components provided in single kits, which are each time necessary.The ducting system solution allows the use of domestic space heating not only through existing narrow chimney stacks but also of vertical expanded spaces with closed perimeter.From the installation point of view this provides a particularly rapid solution for lining an existing but unsuitable chimney stack; a 90° elbow is connected to the boiler flue outlet, and the new liner then made up using as many straight Ø 60 mm extension as are needed, finishing at the top with flue terminal.The pipes are closed through “clamps” alternated with spacer closing bands that, thanks to their expansion tongues, allow the pipe to stay in the middle of the chimney.

Immergas guarantee its ducting system according to the updated technical regulation, on condition that it is installed following the installation safety rules. The installation has to be effected in conformity with the assembling instruction provided by the manufacturers.

ImmERGAS GuARANtEE

Description Code

Vertical outlet kit for duct system Ø 60(vertical concentric exhaust flue terminal Ø 60and chimney closing panel)

3.012112

Push-fitting extension pipes kit 1 m for duct system Ø 60(4 extension pipes Ø 60 2 m long) 3.012144

Push-fitting extension pipes kit 2 m for duct system Ø 60(1 extension pipe Ø 60 2 m long) 3.013869

Pipe clamp kit for duct system Ø 60(5 pipe clamps Ø 60) 3.012145

Spacer pipe clamp kit for duct system Ø 60(3 spacer pipe clamps Ø 60) 3.012146

Hanging bracket kit(adjustable support chimney hanging bracket) 3.011600

Support band kit for duct system Ø 60(support bend Ø 60, bend locking collar, clamp,reduction Ø 80 - Ø 60)

3.012153

Chimney hole closing panel(hole closing panel, inspection door and grommet) 3.012008

90° bend Ø 60 for duct system1 bend 90° Ø 60 3.013870

4140

“GR

EE

N S

ER

IES

” Fl

uE

Sy

St

Em

S

“GR

EE

N S

ER

IES

” Fl

uE

Sy

St

Em

S

Ø 80 mm flexible ducting systemFor condensing boilers

Immergas also offers a specific Ø 80 mm flexible ducting system for its condensing boilers, including VICTRIX 50 model. This system, made in PP, is particularly suitable for lining existing chimney and flue stacks (or shafts) that are not perfectly straight, where a rigid ducting system could in some cases be difficult to install. In effect, the flexibility of the duct allows installation even in chimneys with significant misalignments.The flexible pipe is the essential element of the system and it is a sole component 12 meters long.Depending on the particular installation, this component can either be cut to size or, for rises in excess of 12 meters, extended with a special flexible -to-flexible adapter kit. The flexible pipe has no joins, a feature which together with the lightness of the system as a whole, signifies extreme versatility of use as well as notable ease of installation.From the installation point of view, the connection to the boiler flue outlet is made with an 87° x Ø 80 mm bend; this is then connected to the duct at the bottom of the run, and the flue terminal to the top.The flexible duct is anchored to the inside wall of the chimney stack by means of a metal ring and spider; it is also connected rigidly to the bend at the bottom by way of a special adapter, and to the flue terminal at the top.Once installed, the flue duct can be inspected from the bottom end, by way of the flap provided.

Installers should note that 80 mm is the nominal diameter of the flexible duct (in practice, the external diameter is 89,5 mm).

The whole ducting system concerns the first 5 kits shown in these pages. The adapting kit F/F is necessary only if 2 parts have to be joined with connecting 2 flexible pipes.

Immergas guarantee its ducting system according to the updated technical regulation, on condition that it is installed following the installation safety rules. The installation has to be effected in conformity with the assembling instruction provided by the manufacturers.

ImmERGAS GuARANtEE

Description Code

Flexible duct kit Ø 80 mm, L=12 m + 4 centering spacer 3.014170

Kit support components for flexible ducting system 3.014171

Vertical outlet kit Ø 80/125 for flexible ducting system 3.014174

Valley kit for flexible ducting system 3.014173

Chimney hole closing panel kit 3.012008

Adapter F/F 3.014172

4342

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

Description Code



Concentric horizontal anti-freeze complete kit Ø 60/100 3.018210

Concentric vertical outlet Ø 60/100 (red ocher color)

To be combined with the flanged stub-pipe for vertical outlet(Code 3.011141)

3.015631

Horizontal outlet Ø 60/100 3.011572

Flanged stub-pipe Ø 60/100 vertical outlet 3.011141

Flanged bend Ø 60/100 3.011139

1 extension pipe Ø 60/100 0,3 m long with inspection hole 3.014418

1 extension pipe Ø 60/100 0,5 m long 3.018278

1 extension pipe Ø 60/100 1 m long 3.018277


90° bend Ø 60/100 3.010949

90° bend Ø 60/100 with inspection hole 3.016172

45° bend Ø 60/100 3.010950

Condense tank kit Ø 60/100 3.016173

“Blue Series” flue systems

The “Blue Series” kits are exclusively made for traditional boilers and they are manufactured in aluminium in order to guarantee high resistance and allow quick and functional installation, thanks also to the simple coupling system adopted and to the use of special seals. To ensure correct installation of Immergas traditional boilers, the air inlet/flue outlet pipes kit must be selected from the Immergas “Blue Series” shown here.

FluE SyStEm FOR tRADItIONAl BOIlERS Ø 60/100

Flue components for traditional boilers and water heatersDescription Code


Twin pipes complete kit Ø 80/80 insulated 3.010233

Vertical flue outlet for twin pipes Ø 80 3.010963

Wind-stop outlet 3.011488

Flanged stub-pipes Ø 80 3.011570

4 extension pipes Ø 80 0,5 m long 3.011491

4 extension pipes Ø 80 1 m long 3.010741


1 insulated extension pipe Ø 80 1 m long 3.010947

1 insulated extension pipe Ø 80 2 m long 3.010948

4 x 90° bend Ø 80 kit 3.010955

90° bend Ø 80 with inspection hole 3.016175


4544

Description Code

45° bend Ø 80 kit 3.010956

Insulated 90° bend Ø 80 kit 3.010953

Insulated 45° bend Ø 80 kit 3.010954

Female/female 90° bend Ø 80 3.011571

Female/female stub-pipe Ø 80 3.012714

Condense tank kit Ø 80 3.012009

Flue outlet wind-stop grate Ø 80 3.010962

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

Description Code

Adapter Ø 60/100 - 80/125 3.010957



1 extension pipe Ø 80/125 0,5 m long 3.011157



90° bend Ø 80/125 3.010951

90° bend Ø 80/125 with inspection hole 3.016171

45° bend Ø 80/125 3.010952

Condense tank kit Ø 80/125 3.010960


4746

Description Code

10 gasket kit Ø 60(5 bend gaskets and 5 extension gaskets) 3.011143

10 gasket kit Ø 80 3.011144

10 gasket kit Ø 100 3.011145

10 gasket kit Ø 125 3.011146

Wall sealing plate Ø 125 (2 pieces) 3.010958



“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

ADDItIONAl KItS FOR tRADItIONAl BOIlERS

Type Code

Condense tank kit Ø80 3.012009

1

2 3

Ø 80 mm ducting systemFor traditional boilers

The system consists in a series of components, supplied as individual kits, which can be assembled in 3 different configurations:1 tWO-tEE ducting system2 ONE-tEE ducting system3 Ducting system WItH INlEt BENDIn every configuration the pipes of the ducting system can be positioned, apart from existing chimneys, also in shaft without good development and with close perimeter.

1 tWO-tEE ducting systemWith this solution the ducting system pipes are fitted into a TEE connection, in order to connect:• The boiler, coupled to the horizontal leg• A second tee element, with a respective inspection flap, located at a convenient height below the boilerThis system allows easy inspection of the flue and includes a special condensate collector kit to which a drain line can be connected.

2 ONE-tEE ducting systemIn this configuration, the pipes of the ducting system end at the bottom with a TEE, of which the horizontal leg is connected to the boiler. The vertical bottom leg of the TEE incorporates a condensate collector kit that can be coupled to a drain line with a siphon trap. The flue is inspected from the point at which the duct connects with the boiler.

3 Ducting system WItH INlEt BENDThis is the quickest ducting solution for lining an existing but unsuitable chimney. The connection between the boiler and the inlet end of ducting system is made with a 90° bend. Using this configuration, the Ø 80 condense tank kit will be positioned near the boiler flue outlet (code 3.012009).

Description Code

Cover kit for EOLO Star 24 3.019090

Cover kit for EOLO Extra 24 kW 3.016304

Cover kit for EOLO Extra 28/32 kW 3.016022

Cover kit for MINI EOLO 28 - MAIOR EOLO 3.020805

Cover kit for MINI EOLO 24/X 24 3.020897

Cover kit for CAESAR 14 3.014201

Cover kit for Super CAESAR 17 3.015980

COVER KItS

4948

Description Code

Complete terminal kit 3.011582

4 extension pipes Ø 80 1 m long 3.011583


5 pipe clamps kit 3.011585

3 spacer pipe clamps kit 3.011586

Adjustable support chimney plate and chimney hanging bracket 3.011600

Kit comprised of “T” fitting, aluminum draining cap (with its exit), chimney closing panel for inspection, chimney inspection door and grommet Ø 16

3.011601

“T” coupling seal kit with condensate trap 3.011961

Description Code

Condensate siphon kit 3.011599

Support bend kit 3.012007

“T” connector kit 3.011595

Chimney hole closing panel 3.012008

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

FluE SyStEm COmPONENtS Ø 80 mm

“Blu

E S

ER

IES

” Fl

uE

Sy

St

Em

S

5150

VICT

RIX

50/7

5/90

/115

VICT

RIX

Zeus

Sup

erio

r kW

VICT

RIX

Zeus

VICT

RIX

Supe

rior k

W

VICT

RIX

Supe

rior k

W X

VICT

RIX

VICT

RIX

X / V

ICTR

IX R

EOLO

Ext

ra k

W H

P

HERC

ULES

Con

dens

ing

HERC

ULES

Sol

ar

ZEUS

Sup

erio

r kW

AVIO

/ZEU

S kW

MAI

OR E

OLO

NIKE

Min

i 28

kW S

peci

al

MIN

I NIK

E/EO

LO

MIN

I NIK

E/EO

LO X

NIKE

/EOL

O St

ar

EOLO

Ext

ra k

W

JULI

US

CAES

AR 1

4

Supe

r CAE

SAR

17

Description Code

Safety kit for single boiler(it includes thermometer, thermometer holder, lock, thermostatwith manual reset, connection tap for pressure gauge,manual reset pressostat, gas intercepting valve trap,expansion vessel connection)

3.015222 •

Three-way valve kit connection to the separate storage tank(it includes the storage tank probe) 3.015223 •

Hydraulic manifold kit for single boilerto allow rise in head/flow rate of the system(it includes a mud-filter on the return pipe)

3.015224 •

Hydraulic manifold kit for 2 boilers in cascade(including the intercepting valve and the non-returnfor each appliance)

3.015225 •

Hydraulic manifold kit for additional boiler in cascade(including the intercepting valve and the non-return valve) 3.015226 •

Safety kit for boilers in cascade(it includes thermometer, thermometer holder, lock thermostatwith manual reset, connection tap for pressure gauge,manual reset pressostat, gas intercepting valve trop,expansion vessel connection)

3.015227 •

Condensate neutralizer kit for cascade installation 3.019464 •

Condensate neutralizer kit for single installation 3.019857 •

Granulate for condensate neutralizer 3.019865 •

OP

tIO

NS

RA

NG

E

OP

tIO

NS

RA

NG

E

Hydraulic system

5352

VICT

RIX

50/7

5/90

/115

VICT

RIX

Zeus

Sup

erio

r kW

VICT

RIX

Zeus

VICT

RIX

Supe

rior k

W

VICT

RIX

Supe

rior k

W X

VICT

RIX

VICT

RIX

X / V

ICTR

IX R

EOLO

Ext

ra k

W H

P

HERC

ULES

Con

dens

ing

HERC

ULES

Sol

ar

ZEUS

Sup

erio

r kW

AVIO

/ZEU

S kW

MAI

OR E

OLO

NIKE

Min

i 28

kW S

peci

al

MIN

I NIK

E/EO

LO

MIN

I NIK

E/EO

LO X

NIKE

/EOL

O St

ar

EOLO

Ext

ra k

W

JULI

US

CAES

AR 1

4

Supe

r CAE

SAR

17

Description Code

Hydraulic separator for 100 kW installations 3.020839 •



Hydraulic alignment kit for VICTRIX 50/75 and VICTRIX 90/115 in cascade 3.021385 •

Flue alignment kit for VICTRIX 50/75 and VICTRIX 90/115 in cascade 3.021386 •

Low temperature second zone kit 3.018836 •

High temperature second zone kit 3.018837 •

2 high temperature zones kit 3.018838 •

Additional low temperature zone kit for ABT version 3.018839 •

2 low temperature zones kit 3.020003 •

OP

tIO

NS

RA

NG

E

OP

tIO

NS

RA

NG

E

Hydraulic system

5554

VICT

RIX

50/7

5/90

/115

VICT

RIX

Zeus

Sup

erio

r kW

VICT

RIX

Zeus

VICT

RIX

Supe

rior k

W

VICT

RIX

Supe

rior k

W X

VICT

RIX

VICT

RIX

X / V

ICTR

IX R

EOLO

Ext

ra k

W H

P

HERC

ULES

Con

dens

ing

HERC

ULES

Sol

ar

ZEUS

Sup

erio

r kW

AVIO

/ZEU

S kW

MAI

OR E

OLO

NIKE

Min

i 28

kW S

peci

al

MIN

I NIK

E/EO

LO

MIN

I NIK

E/EO

LO X

NIKE

/EOL

O St

ar

EOLO

Ext

ra k

W

JULI

US

CAES

AR 1

4

Supe

r CAE

SAR

17

Description Code

Additional expansion vessel

3.018433 • • • ZEUS only

3.017514 •X 24, X 12only

Shut off knobs 3.5324 • • • • • • • • • • • • • • •

Shut off knobs with filters 3.015854 • • • • • • • • • • •

Solar valve 3.018911 • • • • • •

Mixing valve 3.019099 • • • • • • •

OP

tIO

NS

RA

NG

E

OP

tIO

NS

RA

NG

E

Hydraulic system

5756

VICT

RIX

50/7

5/90

/115

VICT

RIX

Zeus

Sup

erio

r kW

VICT

RIX

Zeus

VICT

RIX

Supe

rior k

W

VICT

RIX

Supe

rior k

W X

VICT

RIX

VICT

RIX

X / V

ICTR

IX R

EOLO

Ext

ra k

W H

P

HERC

ULES

Con

dens

ing

HERC

ULES

Sol

ar

ZEUS

Sup

erio

r kW

AVIO

/ZEU

S kW

MAI

OR E

OLO

NIKE

Min

i 28

kW S

peci

al

MIN

I NIK

E/EO

LO

MIN

I NIK

E/EO

LO X

NIKE

/EOL

O St

ar

EOLO

Ext

ra k

W

UB In

ox 8

0-2

UB In

ox 1

20-2

UB In

ox 2

00-2

UB In

ox S

olar

200

-2

Description Code

Recirculation kit (with domestic hot water pump)

3.015380 • • • •

3.020001 •

Recirculation kit (only probe pipe)

3.012944 • •3.011547 •3.013498 •3.022198 •3.022199 • •3.022200 •

Anti-scale kit

3.016305 • • •3.014945 •3.013860 •3.017323 •

D.H.W. expansion vessel

3.017744 •

3.020400 •

OP

tIO

NS

RA

NG

E

OP

tIO

NS

RA

NG

E

Hydraulic system

5958

VICT

RIX

50/7

5/90

/115

VICT

RIX

Zeus

Sup

erio

r kW

VICT

RIX

Zeus

VICT

RIX

Supe

rior k

W

VICT

RIX

Supe

rior k

W X

VICT

RIX

VICT

RIX

X / V

ICTR

IX R

EOLO

Ext

ra k

W H

P

HERC

ULES

Con

dens

ing

HERC

ULES

Sol

ar

ZEUS

Sup

erio

r kW

AVIO

/ZEU

S kW

MAI

OR E

OLO

NIKE

Min

i 28

kW S

peci

al

MIN

I NIK

E/EO

LO

MIN

I NIK

E/EO

LO X

NIKE

/EOL

O St

ar

EOLO

Ext

ra k

W

UB In

ox 8

0-2

UB In

ox 1

20-2

UB In

ox 2

00-2

UB In

ox S

olar

200

-2

Description Code

Cascade and zone regulator kit 3.015244 •

Wall box kit for cascade and zone regulator 3.015265 •

Remote control for single light commercial boilers 3.020358 •

Zone manager kit 3.015264 •

Modulating room thermostat 3.015245 •

Flow probe kit 3.015267 •Storage tank sensor kit (to manage the storage tank as a zone) 3.015268 •

Super CAR (modulating remote control) 3.016577 • • • • • • • • •

CARV2 (modulating remote control) 3.021395 • • • • • • • • • • • • • • •

CAR Universal (modulating remote control) 3.020946 • • • • • • • • • • • • • • •

Mini CRD (Mini Digital Remote Control) 3.020167 • • • •

OP

tIO

NS

RA

NG

E

OP

tIO

NS

RA

NG

E

Climatic regulation

6160

VICT

RIX

50/7

5/90

/115

VICT

RIX

Zeus

Sup

erio

r kW

VICT

RIX

Zeus

VICT

RIX

Supe

rior k

W

VICT

RIX

Supe

rior k

W X

VICT

RIX

VICT

RIX

X / V

ICTR

IX R

EOLO

Ext

ra k

W H

P

HERC

ULES

Con

dens

ing

HERC

ULES

Sol

ar

ZEUS

Sup

erio

r kW

AVIO

/ZEU

S kW

MAI

OR E

OLO

NIKE

Min

i 28

kW S

peci

al

MIN

I NIK

E/EO

LO

MIN

I NIK

E/EO

LO X

NIKE

/EOL

O St

ar

EOLO

Ext

ra k

W

UB In

ox 8

0-2

UB In

ox 1

20-2

UB In

ox 2

00-2

UB In

ox S

olar

200

-2

Description Code

External probe

3.014083 • • • • • • • • • • • • • • •3.015266 •

Telephonic remote control 3.013305 • • • • • • • • • • • • • • • •

GSM telephonic remote control 3.017182 • • • • • • • • • • • • • • • •

CRONO 7 3.021622 • • • • • • • • • • • • • • • • • • • • •Radio-timer/room thermostat (wireless) 3.014439 • • • • • • • • • • • • • • • • • • • • •Room thermostat 3.012287 • • • • • • • • • • • • • • • • • • • • •

Control box for pumps and zone 3.011668 • • • • • • • • • • •

Relay board kit

3.015350 • • • • • • • • •3.017331 •

Anti-freeze protection kit -15 °C

3.016144 •3.015361 •3.015348 • •3.017324 • • • • •3.021474 • EOLOonly EOLOonly

Safety thermostat kit

3.019869 •3.019229 • •

Solar probe kit 3.021452 • •

OP

tIO

NS

RA

NG

E

OP

tIO

NS

RA

NG

E

Climatic regulation

6362

Description Code

All-purpose connection kit 3.011667

Connection kit for NIKE/EOLO Star 24and MINI NIKE/EOLO 24 3.015229

Connection kit for NIKE Mini 28 kW Special 3.016671

Connection kit for MAIOR EOLO and MINI EOLO 28 3.021453

Connection kit for EOLO Extra 24 kW 3.019335

Connection kit for EOLO Extra 28/32 kW and EOLO Extra kW HP 3.019329

Connection kit for VICTRIX 26 3.017494

Connection kit for VICTRIX X 12/24 3.017495

Connection kit for VICTRIX Zeus 26 3.020505

Storage tank connection kit for VICTRIX Superior 32 kW X 3.019213

Storage tank connection kit for MINI X and MAIOR X 3.020934

Storage tank connection kit for VICTRIX X 12/X 24 3.022193

Solar panel kit for HERCULES Condensing(pipes and fittings) 3.019998

Solar panel kit for 200 litre storage tank unit(pipes and fittings) 3.022195

Solar panel kit for 200 litre storage tank units connected in parallel (pipes and fittings) 3.022196

Solar panel kit for 120 litre storage tank unit(pipes and fittings) 3.022197

Connection kit for 200 litre storage tank unitsconnected in parallel (sanitary side and system side) 3.022212

Code Description EAN code

3.5324 Shut off knobs 8015065700897

3.010347 Recirculation kit (only probe pipe) 8015065706561

3.010351 Twin pipes complete kit Ø 80/80 8015065707339

3.010352 Concentric vertical complete kit Ø 80/125 8015065707322

3.010526 Concentric horizontal complete kit Ø 80/125 8015065707315

3.010739 1 extension pipe Ø 60/100 2 m long 8015065707377

3.010741 4 extension pipes Ø 80 1 m long 8015065707155



3.010947 1 insulated extension pipe Ø 80 1 m

Date post:	02-Feb-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

CATALOGUE CATALOGUE condensing technology · 2012. 11. 29. · MAIOR EOLO combi with “Aqua...

Documents