NAGEL DigiFold Pro

NAGEL AutoFold Pro

Creasing and FoldingProfessional creasing and folding - manually and automatically

Making printings alive

2

Nagel creasing and folding machinesProfessional creasing before folding

Digitally printed sheets are very sensitive and must be handled gently during finishing. To prevent a deterioration of the quality and appearance of the product, damage of the surface, crack of the substrate and tearing of the paper during the folding process, the sheets must be creased before they are folded. So, the final product retains its perfect look.

Proven creasing technology

During creasing, the material is gently compressed to prevent

cracking or toner breaking. Nagel creasers ensure accu-rate creasing for an opti-mum folding result in the next finishing step.

Nagel creasing machines are the ideal choice for sophisti-cated finishing of very different stocks – paper, cardboard or booklet covers, varnished, laminated, mattcoated or with the wrong running direction. All models are very easy to use.

Materials:

Nagel offers manual table top creasing machines as Rillnak 35 + 52 as well as semi-automatic units with foot switch - as the Rillnak-E models - and automatic creasing and folding machines for high volume operation and the combination of creasing and folding - the DigiFold Pro.

Perfect creasing with compact table topunits

The Nagel table top creasers Rillnak for manual or foot switch operation crease print products for a perfect fold-ing result. Either for copy shops, printing houses or book-binderies - the table top units are the ideal choice for the comfortable finishing of short to medium volumes.

All models of Rillnak use the knife-against-groove pro-cess. Unlike in rotary creasing, a polished creasing knife presses the paper into a solid creasing matrix without damaging the substrate or the paper fibres.

Thanks to the sturdy construction, manual creasing with the Rillnak is pleasantly smooth, and the indicator scale makes the device very easy to use. The two standard stops permit multiple creases, so even highly costomised orders can be processed. Additional stops can be installed at any time.

Automatic creasing and folding machines

Nagel offers a wide range of automatic creasing machines. As well as the manual units, all automatic creasers - Auto-Rillnak Pro 33, AutoRillnak Pro 50 and DigiRillnak - use the optimised knife-agains-groove creasing technology. So, paper of up to 400 gsm can be creased effortlessly.

The Nagel folding machines are equipped with a patented system. They dispense entirely with conventional buckle plates, using an electronically controlled “flying knife” contoured around extra large diameter rollers. The speed is matching to the demands of damageable digital prints. A dynamic sheet deflector is used that only touches the leading edge of the sheet. This reduces the risk of scratch-ing or marking.

PosiFeed

All machines of the Pro-range are equipped with a new feeder (= PosiFeed). The feeder stops the drum as the vacuum pulls the sheet down before the drum starts to feed. This significant change enables the feeder to be piled higher and feed more difficult stocks.

Knife and groove

The compact table top models of Rillnak are everything you need for professional print finishing in daily office work, printing houses, copy shops or bookbinderies.

3

Rillnak 35 + 52 and Rillnak-E 36 + E 52Manual and semi-automatic creasing for a perfect look

Rillnak 35 Rillnak 52 Rillnak-E 36 Rillnak-E 52

Recommended paper weight (gsm) 70 – 300 70 – 300 70 – 350 70 – 350

e to backstop min. (mm) 25 25 40 40

e to backstop max. (mm) 350 520 435 520

Sheet size max. width (mm) 350 520 365 520

Stops

Additional stops

H x W x L (mm) 120 x 385 x 600 120 x 555 x 750 210 x 480 x 700 220 x 640 x 780

Weight net/packed (kg) 12/13 17/19 18 / 20 27,5 / 31

Power supply – – 230 V / 50 Hz 230 V / 50 Hz

* Varies according to hardness, type of fold and substrate.

Standard

– Not available

Technical specifications

Rillnak 35 + 52Both Nagel table top models Rillnak 36 and Rillnak 52 are perfectly suitable for short creasing volumes of digital prints. The Rillnak 52 is especially suitable for creasing digital prints of the 52 cm professional format, while the Rillnak 35 is perfect for digital prints up to A3 oversize format.

Either model can process all types of paper up to 300 gsm without any problems.

Rillnak-E 36 + E 52The Rillnak-E 52 is especially suitable for creasing prints of the 52 cm professional format, while the Rillnak-E 36 is perfect for creasing digital prints up to A3 oversize format.

The use of the Rillnak-E 36 and E 52 saves expensive pro-duction time. They are easy to set-up and operate. Two standard stops permit multiple creases, additional stops are optional available and can be installed at any time.

With the proven creasing technology all types of stock up to 350 gsm can be creased effortlessly. Both models pro-vide two creasing widths as standard (1,2 mm and 1,6 mm) – with the ability to change from one to another in seconds. The creasing matrix is electronically activated by a foot switch for increased accuracy and productivity.

NAGEL Rillnak-E 52 with foot switch

NAGEL Rillnak 52

4

AutoRillnak Pro 50 – Powerful and flexible for large formats

The AutoRillnak Pro 50 is larger than the well-known AutoRillnak Pro 33 and can process paper formats of up to 500 mm width and up to 1,000 mm length without prob-lems. It can process up to 8.500 sheets/hour and comes with an unlimited numeric memory. Additionally, the AutoRillnak Pro 50 is equipped with the new larger touch screen display. The stock is fed into the creaser by a blast and suction air system that prevents scratches on the digi-tal prints (PosiFeed).

It also comes with a standard plug-in perforator. Additional perforating blades are available as options. Micro-perforation with 96 teeth is possible as well with the according blade.

Optionally, the A2-Jogger may be added to increase the output capacity. It jogges the creased material to ease the subsequent processing.

AutoRillnak Pro 33 – Intuitive operation and high creasing speed

The AutoRillnak Pro 33 is the ideal finishing solution for users who want to have a fully automated and fast creaser, but do not have to process large-format sheets. The creaser can process stocks up to 700 mm x 330 mm auto-matically; larger formats up to 1,000 mm x 330 mm can be fed into the creaser manually. It also comes with a standard plug-in perforator. Additional perforating blades are available as options.

The AutoRillnak Pro 33 can process up to 8.500 sheets / hour and comes with an unlimited numeric memory. Addition-ally, the AutoRillnak Pro 33 is equipped with the new larger touch screen display. The paper feeding works with a blow-suction system, which prevents scratching of digital prints (PosiFeed).

AutoRillnak Pro 33 / AutoRillnak Pro 50Automatic creasing - also for large formats

AutoRillnak Pro 33

AutoRillnak Pro 50

5

DigiRillnak AutoRillnak Pro 33 AutoRillnak Pro 50

Speed max. (sheet / hour) 1 crease (A4) 4,000 (depending on operator) 8,500 8,500

Memory of applications 9 unlimited unlimited

Recommended paper weight (gsm) approx. 100 – 350 approx. 100 – 400 approx. 100 – 400

(approx. 0,11mm-0,35mm)* (approx. 0,11mm-0,40mm)* (apprx. 0,11mm-0,40mm)*

Sheet size max. by 630 x 330 1,000 x 330 1,000 x 500 manual feed (mm)

Sheet size max. (mm) – 700 x 330 700 x 500

Sheet size min. (mm) – 140 x 160 140 x 210

Narrow sheet extension paper guide min. paper width 100 mm

Landscape paper guide

depending on paper weight

Minimum distances (mm) Repeat creasing 4 3 4 from lead edge 25 25 25 from tail edge 20 20 20

Plug-in perforator

Perforating blades 28 teeth 28 teeth 28 teeth

L x H x W (mm) 80 x 50 x 50 1,168 x 990 x 457 1,780 x 1,000 x 700

Weight net / gross (kg) 55 / 80 110 / 128 150 / 178

Power supply 240 V 50 / 60 Hz 240 V 50 / 60 Hz 240 V 50 / 60 Hz

Standard * Varies according to hardness, type of fold and substrate.

– Not available

NAGEL DigiRillnak – table top model

The DigiRillnak closes the gap between semi-automatic and fully automatic systems.This compact machine creases formats of up to 630 mm x 330 mm automatically, but the stock is fed into the creaser by hand.

The machine can be operated comfortably via a joystick and display. A standard perforating tool is included, as standard. The DigiRillnak is available as desktop model or with an optional stand.

DigiRillnakCompact and versatile

Technical specifications

6

AutoFold ProCompatible with any creasing machine

AutoFold Pro with long conveyor (optional) and AutoRillnak 50

The new AutoFold Pro is a free standing automatic folding machine designed specifically for owners of a Nagel AutoRillnak or any creasing machine who want to upgrade to a creasing and folding machine. It is equipped with the patented flying knife technology to prevent scuff-ing or marking on digital stocks, which may happen with standard folding technologies.

The AutoFold Pro can simply be adjusted to the Nagel Rillnak or the height of the vacuum feed conveyor of any creaser.

The AutoFold Pro gets controlled by the same innovative touch-screen panel that all machines from the Pro-range are equipped with (e.g. the length of the pre-creased sheet or the folding type). After both machines are switched on, the pre-creased sheets from the creaser get delivered directly onto the AutoFold Pro feed conveyor. Here they are accurately registered to the side-lay before being folded as programmed and delivered onto a motor driven shingling delivery system.

The AutoFold Pro comes with a short conveyor belt; a long conveyor belt is available as an option.

AutoFold Pro with short conveyor (standard)

AutoFold Pro

Speed per hour (A4 in half) 6,240

Maximum sheet size (mm) 600 x 385 short conveyor / 900 x 385 long conveyor

Minimum sheet size (mm) 210 x 140

Maximum paper weight (gsm) Takes stock up to 0,4 mm (approx 400 gsm)*

Maximum number of folds per sheet 2

Maximum number programmed applications Unlimited alpha numeric

Minimum repeat fold distance (mm) 70

Minimum fold distance from lead edge (mm) 50

Minimum fold distance from tail edge (mm) 50

Min. fold length (mm) 70

Max. fold length (mm) up to 450 (automatic feed)

up to 1,800 (hand feed)

Adjustments (Increments in mm) 0,1

Batch counter

Total counter

Dimensions (L x W x H) 1,700 x 680 x 1,220

Weight net (kgs) 128

Power requirement (V) 240 V 50 / 60 Hz

Standard * Varies according to hardness, type of fold and substrate.

7

Technical specifications

Intuitive operation of Pro machines

The new touch screen panel of the Pro-range is essentially larger than the one of the machines of the past genera-tions. All major functions get operated via this panel. Only the sheet length and the fold type for the finished product have to be keyed in (popular sizes and folds are pre-set). The software will automatically calculate where the creas-es need to be and set them accordingly. Any minor chang-es to the crease position can be made by touching in the relevant section. Folding gap data are displayed digitally on the panel.

Another advantage is the language-independence of the software – only symbols are used, what makes translations unnecessary. Learning to operate the new NAGEL touch screen panel

touch screen is very easy. The extensive alpha-numeric memory allows an unlimited number of jobs to be stored and named as chosen.

8

A further feature of the sophisticated SmartScreen is the ability to memorise and store repeated jobs in the alpha numeric memory which can be retrieved within seconds.

The user’s work is facilitated by the integrated batch and reset counters, which make it unnecessary to count batch-es after processing, i.e. for bundling.

The side lay alignment section of the DocuFold Pro ensures that the sheets are posi tioned correctly during folding, a prerequisite for high-quality products. A problem that affects many other folding machines is child’s play for the DocuFold Pro: Thanks to the vacuum feed table, statically charged or wavy paper is transported neatly into the folding rollers without causing a jam.

DocuFold ProThe compact automatic folding machine

With its comprehensive standard equipment, the Nagel DocuFold Pro folding machine is the ideal choice for finishing digital print products. The machine’s extremely short set-up times make it particularly suited for printing houses and bookbinderies with frequently changing print runs.

By entering the sheet size and the fold type the DocuFold Pro automatically adjusts the fold plates and delivery rol-lers electronically. Standard formats are already preset. Operation is therefore quite simple.

Moreover, there is no need to adjust the folding rollers – they adjust themselves automatically to the paper thick-ness, which saves time and reduces the probability of errors. The display has an accuracy of 0.1 mm and can be programmed effortlessly.

Equipped with a user friendly SmartScreen panel it enables an operator with minimum training to carry out a variety of folds from an icon driven touch screen.

A paragon of versatility

At a maximum speed of 27,500 sheets / hour, the Docu-Fold Pro processes formats up to 674 x 365 mm. The ma-chine includes a mode with reduced suction time that is optimally suited for feeding A4 size sheets in landscape for-mat and sizes smaller than A4 and is particularly advan-tageous for perforating and creasing applications.

The spiral folding rollers keep the paper from slipping in the rollers and thereby ensure a precisely positioned fold. Modern applications demand modern formats: short and wide formats or narrow and long formats can be accurately processed with optional extra stops.

Excellent equipment

The folding rollers can be removed without tools

Overlapping sheets are detected, the machine is deactivated, there are no paper jams

The air used to separate the sheets can be adjusted to the sheet length and regulated individually

Every time the suction wheel under the feed table stops, the machine cleans itself by blowing out paper dust.

Docufold Pro – compact and powerful

9

The plug-in perforator is part of the standard equipment; it perforates and scores even cardboard without giving it a wavy shape. Unlike other folding machines, the DocuFold Pro does not guide the sheet around all folding rollers, as this is unnecessary. Different perforating and creasing tools and knives are available.

DocuFold Pro

Working width (mm) 139 – 320

Fold length in plate 1/2 (mm) 338 / 226

Max. sheet size L x W (mm) 674 x 365

Min. sheet size L x W (mm) 140 x 160

Shortest folding length (mm) 46

Max. number of folds per sheet 2

Max./min. paper weight (gsm) 240/56

Load capacity A4 sheets 80 gsm 500

Max. speed (sheets / hour A4) 27,500

Length of conveyor delivery (mm) 645

Maximum number programmed applications Unlimited alpha numeric

Batch counter

Total counter

Touchscreen display

Perforation unit incl. blade

Extra scoring tools

Landscape paper guide

Narrow sheet extension

Power supply 230 V / 50 Hz / 10 A

Weight net (kgs) 132

L x W x H without / with conveyor delivery folded up (mm) 1,240 / 813 x 555 x 1,370

L x W x H packed (mm) 980 x 570 x 1,500

Standard

Technical specifications

NAGEL DocuFold Proplug-in performator scorer

10

NAGEL DigiFold Pro

DigiFold ProCreasing and folding in one operation – up to 6,000 sheets / hour

The unique DigiFold Pro model combines the proven creasing system of the AutoRillnak with a new kind of folding system. The new DigiFold Pro minimizes the pos-sibility of marks or scratches on sensitive stocks during finishing and generates a sharp and perfect fold.

The combination of creasing and folding in a single unit creates a highly productive and user friendly mobile finish-ing centre that works effectively with both digital prints and thick, heavy or cross-grained stock. Make-ready, minimal wastage and ease of operation are key criterias in today’s printing market.

Versatility

The DigiFold Pro works in three ways:

Advantages of the DigiFold Pro

Quality A professional result because of creasing prior to folding

Production speed Up to 6,000 sheets per hour

Operation Large and user friendly touch screen panel

Set-up-time Fast and easy set-up for short print runs

“Print-on-demand” with individual prints, direct mailings and last-minute-changes very often require high flexibility and short set-up times especially in the digital printing market. Finishing machines as the DigiFold Pro are able to keep up with such conditions. Fast set-up and operation, minimum waste paper and high user friendliness are key criterias in today’s printing market.

The DigiFold Pro comes with a large and clearly arranged touchscreen panel and already pre-programmed fold types for quick and easy set-up also for smallest print runs.

11

Proven creasing technology

To avoid cracking of the substrate, the DigiFold Pro works with a technique by which the fibres are embossed and weakened. The creasing mechanism consists of a male creasing rule and a female matrix which get pressed to-gether to perform an exact and crack-free crease.

cracking and paper tearing of sensitive digital prints.

Patented folding system

The DigiFold Pro dispenses entirely with buckle plates or conventional knives, using an electronically controlled “fly-ing knife” contoured around extra large diameter rollers.

The speed is matching the demands of damageable digital prints. The DigiFold Pro uses a dynamic sheet deflector that only touches the leading edge of the sheet. This reduces the risk of scratching or marking.

PosiFeed

Like all machines of the Pro-range the DigiFold Pro is equipped with the special feeder (= PosiFeed). The feeder stops the drum as the vacuum pulls the sheet down before the drum starts to feed. This significant change enables the feeder to be piled higher and feed more difficult stocks.

Flexible and user-friendly

For standard configurations, the DigiFold Pro works in an automatic mode. Once the required fold and sheet length have been selected, an extensive program automatically sets the creasing and folding positions.

An individual operation is employed when extra creases are needed or difficult configurations have to be pro-grammed. In this mode the operator enters the creasing and folding positions manually via the joy stick.

Materials and applications

Professional creasing to perform a superb fold

An extensive program sets the creasingand folding automatically

Prin

t N

o: 0

25

04

/12

1T

Tech

nic

al s

pec

ific

atio

ns

are

sub

ject

to

ch

ang

e w

ith

ou

t p

rio

r n

oti

ce. C

erti

fied

to

CE.

12

DigiFold Pro

Max. speed (A4 sheets / hour) 6,000

Max. sheet size (mm) L x W 700 x 358

Min. sheet size (mm) L x W 210 x 140

Max. paper weight (gsm) Handles material up to 0.4 mm (about 400 gsm)*

Min. paper weight (gsm) Handles material from 0.11 mm (about 100 gsm)*

Max. no. creases per sheet 9

Max. no. of folds per sheet 2

Max. no. stored programmes Unlimited numeric memory

Min. repeat crease distance (mm) 40

Min. repeat fold distance (mm) 70

Min. crease distance from leading edge (mm) 50

Min. fold distance from leading edge (mm) 50

Min. crease distance from tail edge (mm) 50

Min. fold distance from tail edge (mm) 50

Min. fold length (mm) 70

Max. fold length (mm) up to 450 (automatic feed) up to 1,800 (hand feed)

Adjustments (Increments in mm) 0.1

Batch counter

Total counter

Plug-in perforator

Feeding system Bottom suction feed

Dimensions L x W x H (mm) 1,980 x 655 x 1,265

Weight net (kg) 190

Power requirement (V) 220 V

Standard * Varies according to hardness, type of fold and substrate.

Ernst Nagel GmbHBreitwiesenstraße 2170565 Stuttgart / Germany

Phone: + 49 7 11-7 80 78-21E-mail: export@ernstnagel.com

www.ernstnagel.com

For any further information about the complete Nagel product range please look at www.ernstnagel.com or contact your regional dealer.

Disclaimer: As part of our continued product improvement plan, specifications and information puplished here are subject to change without notice. All specifications are dependent on application, type of stock, temperature, RH and print engine used. Specifications quoted were measured on uncoted and unprinted stock.

Technical specifications