+ All Categories
Home > Documents > Kinetic Wulff Construction for Twinned Particles

Kinetic Wulff Construction for Twinned Particles

Date post: 23-Feb-2016
Category:
Upload: hasana
View: 55 times
Download: 3 times
Share this document with a friend
Description:
Kinetic Wulff Construction for Twinned Particles. Monica Olvera , Northwestern University, DMR 1121262. - PowerPoint PPT Presentation
Popular Tags:
1
MRSEC Kinetic Wulff Construction for Twinned Particles Monica Olvera, Northwestern University, DMR 1121262 The Marks group developed a new theoretical approach describing the shape of particles grown in non- equilibrium reactions. Such particles could not be modeled previously, as they are not thermodynamic products. The kinetic Wulff model uses surface growth velocities instead of surface energies, and growth enhancement parameters are included, accounting for the easy nucleation at crystallographic defects and concave surfaces. This approach is able to predict the formation of a variety of common shapes left unexplained by thermodynamic modeling, such as sharp a b c 500 nm Thermodynamic Kinetic Experimental Thermodynamic and kinetic shapes for decahedral (top) and singly twinned (bottom) nanoparticles. Adjacent shapes were modelled with identical surface growth velocity, but kinetic enhancement was applied to obtain the green and red shapes. Nanoparticles pictures on the right were synthesized by the Mirkin group (IRG-3).
Transcript
Page 1: Kinetic  Wulff  Construction for Twinned Particles

MRSEC

Kinetic Wulff Construction for Twinned Particles

Monica Olvera, Northwestern University, DMR 1121262

The Marks group developed a new theoretical approach describing the shape of particles grown in non-equilibrium reactions. Such particles could not be modeled previously, as they are not thermodynamic products. The kinetic Wulff model uses surface growth velocities instead of surface energies, and growth enhancement parameters are included, accounting for the easy nucleation at crystallographic defects and concave surfaces. This approach is able to predict the formation of a variety of common shapes left unexplained by thermodynamic modeling, such as sharp bipyramids and decahedra.

a b

c

500 nm

Thermodynamic Kinetic Experimental

Thermodynamic and kinetic shapes for decahedral (top) and singly twinned (bottom) nanoparticles. Adjacent shapes were modelled with identical surface growth velocity, but kinetic enhancement was applied to obtain the green and red shapes. Nanoparticles pictures on the right were synthesized by the Mirkin group (IRG-3).

Recommended