Make-it-Move A/S | Eli Christensens Vej 74 | DK-7430 Ikast | (+45) 3131 3499 | hwm@make-it-move.com | www.make-it-move.com

hundreds of bedtypes - one tool to move them all

watch movie atwww.make-it-move.com

Adressing Occupational Hazards It has been shown that after years of push-ing and pulling heavy loads (e.g. bariatric patients), there is a high risk of severe back pain or injuries3 , leading to staff absence or early retirement. Using MoovingBeds can help reduce work related injuries.

MoovingBeds | Simple Solutions

Hospitals invariably have many different bed types needing different bed mover speci-fications. MoovingBeds has a one size fits all patent pending locking system, which is completely flexible and can work with all major manufacturers’ wheeled hospital beds and ancilliary carts/trolleys. They are simple, silent and at the touch of a button do away with any complicated adaptations.

Patient Comfort

To enhance patient comfort, not only can MoovingBeds effortlessly carry patient and bed up to a max of 450kg with very low noise operation, it also has the following features: • Unique suspension system for comfortable movement• Effortless and silent bed engagement, with just a push of a button; no more noisy clamps waking patients in their sleep

• Intuitive micro-adjust controls; the bed can be positioned more gently and precisely than is possible manually, ensuring minimum patient disturbance

Lift Compatibility

Using bed moving equipment in lifts is often restricted by the additional length of the device.• MoovingBeds add minimum extra length to the bed fitting easily into standard hospital lifts

Gradients and Camber: Special Features

Transporting beds up and down gradients can be fraught with problems for bed mov-ers with stability, brake control and torque - all be considered.• The unique design of MoovingBeds, in which the bed is raised and locked into place, allows• Less wear and stress on hospital bed wheels• With its electromagnetic brake system, hill starts and stops become simple and effortless• With ample power MoovingBeds can cope with all normal gradients, cambers and floor types

True 3600 Manoeurability

Hospitals often offers almost no space for moving beds. The answer is called true 360o manoeurability.• MoovingBeds are designed to rotate 360o ‘on the spot’ i.e. around the centre of the bed, not the end and use very precise finger controlled micro-adjusted movements.

Traditional bedmover(causes stress to wheels)

MoovingBeds

1 Pushing and Pulling Health and Safety Executive (HSE), www.hse.gov.uk/msd/pushpull/index.html2 University of South Manchesterhave observed that the number porters required per bed has been reduced from two to one since installing bed moving systems.3 HSE state that 35% of RIDDOR “Pushing and Pulling” incedents involve wheeled objects.

avoid backstrain in emergency situations- flexseries fits all bedtypes

One tool to move them all

Moving beds within a hospital is a labour in-tensive and expensive process, with its own unique Health and Safety implications.1Through a joint working programme with our partner hospitals and universities, coupled with unique technological develop-ment skills available ‘in house’, we at Make-it-Move have made it our mission to simplify things for you.

With our unique and revolutionary ‘One tool to move all’ bed moving equipment we have the answers to your bed and ancillary load mover needs.

Intelligent Investment

Investing in MoovingBeds creates rapid savings through:• Reduced need for two-staff procedures 2

• Increased speed and efficiency• Reduced staff absence• Increased efficiency (will move most types of heavy cart or trolley)