Pa00004 Modulo c - Expansion - Villa Lucre

RADIO SITE DESIGN DOCUMENTATIONGSM 1900 MHzSITE NAME: VILLA LUCRE

(EXPANSION)SITE ID: DIGICEL, PA00004

RBS 2106 V3

DIGICEL, PA00004

VILLA LUCRE(EXPANSION)

LZN/IPB 591 PA00004RADIO SITE DESIGNDOCUMENTATION

VILLA LUCRE

RUBRIKFÖRTECKNINGCAPTION LIST

Dokumentnr - Document No

001 53-LZV/ IPB 591 PA00004 Uen

Datum - Date Rev

A GSM 1900 MHz 12009-03-20

RADIO SITE

DESIGN

DOCUMENTATION

DIGICEL

VILLA LUCREEXPANSION

SITE NAME :

DIGICEL

PA00004

Ericsson´s GSM systemGSM 1900, RBS 2106 V3

RUBRIKFÖRTECKNINGCAPTION LIST

Document list 1Dokumentnr - Document No

001 53-LZV/IPB 591 PA00004 Uen

Datum - Date Rev

A Site documents 2

Plant specification 3

Cabling 4

2009-03-20

RADIO SITE

DESIGN

DOCUMENTATION

DIGICEL External alarms 5

Test Results 6

Network Element Acceptance Certificate 7

Abbreviation List 8

PA00004

VILLA LUCRE

Ericsson´s GSM systemGSM 1900, RBS 2106 V3

SITE NAME :

DIGICEL

DOCUMENT LIST Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No

Abdiel Lock 001 51-LZV/IPB 591 PA00004 Uen Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev. File

CEP/S/ND&I/N Juan Manuel Payome A

Project: Digicel, Panama, GSM 1900, RBS 2106 V3Site name: PA00004, VILLA LUCRE

Document name Document number Rev.

RADIO SITE DESIGN 001 53-LZV/ IPB 591 PA00004 Uen ADOCUMENTATION

1 DOCUMENT LIST 001 51-LZV/ IPB 591 PA00004 Uen A

2 SITE DOCUMENTSConfiguration Data (RBS) 1/127 04- IPB 591 PA00004 Uen AConfiguration Data (TRM) 2/127 04- IPB 591 PA00004 Uen AAerial Placing Information 1/153 12- IPB 591 PA00004 Uen AAntenna Layout 2/153 12- IPB 591 PA00004 Uen A

3 PLANT SPECIFICATION

2009-03-20

3 PLANT SPECIFICATIONPlant Specification (RBS) 1/127 11- IPB 591 PA00004 Uen APlant Specification (TRM) 2/127 11- IPB 591 PA00004 Uen A

4 CABLINGCable Distribution Diagram (RBS power/signal) 1/1913- IPB 591 PA00004 Uen ACable Distribution Diagram ( RBS antennas) 2/1913- IPB 591 PA00004 Uen A

5 EXTERNAL ALARMSAllocation Table 193 19- IPB 591 PA00004 Uen A

6 TEST RESULTSSite installation Check List 153 11- IPB 591 PA00004 Uen ATest Report (Antenna Test) 1/153 83- IPB 591 PA00004 Uen ATest Report (NE Integration Test) 2/153 83- IPB 591 PA00004 Uen ATest Report (Alarm Test) 3/153 83- IPB 591 PA00004 Uen A

Mini-Link TN Funtional Test Record 4/153 83- IPB 591 PA00004 Uen A

7 NETWORK ELEMENTACCEPTANCE CERTIFICATETechnical Acceptance Certificate 1/179 61- IPB 591 PA00004 Uen AFinal Acceptance Certificate 2/179 61- IPB 591 PA00004 Uen A

8 ABBREVIATION LIST 006 51- IPB 591 PA00004 Uen A

CONFIGURATION DATA (RBS) Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No

Abdiel Lock 1/127 04- IPB 591 PA00004 Uen Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev. File


Project: Digicel, Panama, GSM 1900, RBS 2106 V3Site name: PA00004 VILLA LUCRE

1 GENERAL1.1 Co-ordinates Long. W:

Lat. N:1.2 Location:

1.3 Type of building Greenfield1.4 RBS Placed on: Concrete

2 TECHNICAL DATA RBS (NEW)2.1 No. of cells 32.2 No. and type of Radio Cabinets 12.3 No. of TRU´s 2 + 2 + 62.4 No type of CDU CDU G_c2.5 TMA Supported No

2B TECHNICAL DATA RBS (OLD)2 1B No of cells 3

2009-03-20

2106 V3

79,483309,04509

VILLA LUCRE

2.1B No. of cells 32.2B No. and type of Radio Cabinets 12.3B No. of TRU´s 2 + 2 + 22.4B No type of CDU CDU G_c2.5B TMA Supported No

3 RBS ANTENNAS & FEEDERS (NEW)3.1 Antenna directions (grid)(Az: GN) ° ° °3.2 Antenna height (m)3.3 Electrical Tilt ("+"=downtilt," -"=uptilt) 0 ° 0 ° 0 °3.4 Mechanical tilt ("+"=downtilt," -"=uptilt) 0 ° 0 ° 2 °3.5 Qty and type of antennas 1 Kathrein 742 215 3.6 Antenna dimensions (mm) L = 1302 W = 155 D = 693.7 Wind load area of one antenna 0,67 m² 310 N at 41,7 m/s3.8 Weight of one antenna 7,5 kg3.9 No. of feeders 23.10 Feeder distance to antennas (m) D = E = F =3.11 Feeder type D = E = F =3.12 Feeder diameter (mm) D = E = F =3.13 Recommended bending radius (mm) D = E = F =3.14 Weight of feeder (kg/m) D = E = F =3.15 Feeder earthing /per feeder D = E = F =0 0

00

7/8"0 0

250

0 00

300

28

0 30

00

00 0.49

00

2

36

2106 V3





2009-03-20

RBS ANTENNAS & FEEDERS (OLD)Antenna directions (grid)(Az: GN) ° ° °Antenna height (m)Electrical Tilt ("+"=downtilt," -"=uptilt) 0 ° 0 ° 0 °Mechanical tilt ("+"=downtilt," -"=uptilt) 2 ° 2 ° 2 ° Qty and type of antennas 3 Kathrein 742 215 Antenna dimensions (mm) L = 1302 W = 155 D = 69Wind load area of one antenna 0,67 m² 310 N at 41,7 m/sWeight of one antenna 7,5 kgNo. of feeders 2Feeder distance to antennas (m) A = B = C =Feeder type A = B = C =Feeder diameter (mm) A = B = C =Recommended bending radius (mm) A = B = C =Weight of feeder (kg/m) A = B = C =Feeder earthing /per feeder A = B = C =

7/8" 7/8"

250 250 250

2 2 2

28 28 28

0.49 0.49

60 180 30030 30 30

0.49

7/8"36 36 36

4 ANTENNA SUPPORT STRUCTURE4.1 Type of tower/mast 30 m Monopole4.2 Antenna support Tilt Kit

5 FLOOR LOAD5.1 For one radio cabinet, fully equipped 0,92 m² (1326kg)

BBU 9500 fully equipped

6 ELECTRICAL DATA6.1 Power consumption/radio cab. (fully eq.) 6 kVA6.2 No. of 2x60 A mains breakers/radio cab. 1

7 TRANSMISSION 7.1 No and type of media for PCM links 1 E17.2 Type of 2 Mbit/s connection in DDF 120 Ohm





2009-03-20

8 LOCATION MAP

CONFIGURATION DATA (TRM)Prepared (also subject responsible if other) Document No.

Abdiel Lock 2/127 04 - IPB 591 PA00004Doc respons/Approved Checked Date Rev. File


Project: Digicel, Panama, GSM 1900, RBS 2106 V3Site: PA00004 VILLA LUCRE

NEW CONFIGURATION

2009/03/20

N/A



CEP/S/ND&I/N Juan Manuel Payome A2009/03/20

OLD CONFIGURATION1 INTERFACE DATA

MagazineSite CodeFacing Sites

Site NameTransmission media typeTransmission Connection Type

2 RADIO LINK DATA

Protection ModeTraffic capacity (Mbps)Path length (Km) 1.81Tx Frequency (MHz) 18792Rx Frequency (MHz) 17782Near ID (terminal) PA00004Far ID (terminal) PA00854

3 LINK BUDGET

Transmit power (dBm) 24Rx Signal in (dBm) -20.68AGC voltage (V) 2.483

2.52.62.7

3.13.23.3

2.32.4

1.5 E1 (2MBit/s), 120 Ohms, RJ45 Connector

2.1 1 + 02.2 2

1.2 PA00854

1.3 ROOSEVELT

1.4 Point to Point Microwave Radio

AMM20p1.1 PA000041.1



CEP/S/ND&I/N Juan Manuel Payome A2009/03/20

4 TECHNICAL DATA

No. of racks/cabinetsFloor load/cabinet (fully equipped)AntennaNumber of antennasAzimuth (DEG) 127.60Elevation (DEG) 0.21Diameter (m) 0.6Height (m.a.g.l) 27Polarization VMounting kit typeRadio Cable length (m) 38Antenna support type (mast)Wind load (N)Max wind torque (Nm)RadioRadio Unit typeRadio Unit sub-bandNumber of radio units 1RAU dimensions(DxWxH) mmRadio Unit Weight (Kg)Power SplitterTypeMounting typeWaveguide length (m)

5 POWER CONSUMPTION

Basic node AMM6p (W)Radio terminal (W)

5.1 3505.2 27

4.21 0.94.20 Bracket4.19 Asymetric

4.18 7

4.164.17 144X326X411

4.14 RAU1N184.15 15

4.11 Mast

4.13 1804.12 570

4.44.54.64.7

4.10

4.84.9 Integrated

4.3 1

4.1 14.2 0,92 m², 1326kg (Including RBS)

PLANT SPECIFICATION (RBS) Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No

Abdiel Lock 1/127 11-IPB 591 PA00004 Uen Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev. File

CEP/S/ND&I/N Juan Manuel Payome 2009-03-20 A

Project: Digicel, Panama, GSM 1900, RBS 2106 V3Site name PA00004Configuration: 2+2+6

Radio base equipment (NEW)Denomination Product code Qty

A RBS 2106i- Outdoor1 EQUIPPED CABINET/2106 V3 MASTER BFM 107 159 12 TRANSCEIVER/DTRU 1900 MHZ EDGE KRC1311004/2 23 INTERFACE UNIT/INSTALLATION INTERFACE 701/BYB41501 1

B Antenna System, 7/8" Feeder1 Single Antenna, X-Pol, 1710-2200 MHz, 65 deg, 18 dBi, MET0-10 KRE 101 1985/1 12 Antenna Downtilt kit 0-10 degree Antenna 1302mm SXA 120 104/4 13 Feeder Marking Set NTM 201 207/1 14 Jumper Cable, 1/2", 2m, 7/16 Male to 7/16 Male, Indoor/Outdoor TSR 951 70/2 25 Jumper Cable, 1/2", 3m, 7/16 Male to 7/16 Male, Indoor/Outdoor TSR 951 70/3 26 EARTH DISTR.CONDUCT./7/8" GROUNDING FOR NGT 901 17/2 47 CONNECTOR/7-16(F) ANDREW POSITIVE STOP C RNT 899 101/1 48 Jointing Sleeve C89, for 16-50/16-50mm2 SNT 102 26 89 Feeder Clamp, 7/8", Profile Mounting 6/NTM 201 230/4 39.610 Sealing Set, Feeder Connectors NTM 201 2426 411 Tie Strap, W=9.5mm, L=457mm, Plastic/Metal SET 145 095/457 1212 7/8 Feeder Cable, AVA, Sector A FAB 102 943/1 -/8 eede Cab e, , Secto 0 9 3/13 7/8 Feeder Cable, AVA, Sector B FAB 102 943/1 -14 7/8 Feeder Cable, AVA, Sector C FAB 102 943/1 2X41





Radio base equipmentDenomination Product code Qty

C1 COMBINER UNIT/CDU-G 1900 ..BFL119153/1 12 CABLE WITH CONNECTOR/COAXIAL CABLE ..RPM777144/01685 23 SET OF MATERIALS/CDU-G COMBINED CR3 RBS ..NTM2013339/1 14 FRAME/GREY RBS 2106V3 HEAT EXCHANGER ..SEB1121162/03 15 SUBRACK/SUBRACK BACKPLANE TRU ..BFX101107/3 16 CABLE WITH CONNECTOR/SIGNAL CABLE, RBS 2 ..RPM777152/01050 17 CABLE WITH CONNECTOR/SIGNAL CABEL, RBS 2 ..RPM777151/01100 18 CONNECTION CABLE/A3CU, US ..RPM628180/3 19 RECTIFIER/PSU; POWER SUPPLY UNIT ..BML353206/2 410 FUNCTIONAL UNIT/DXU-23 ..BOE60221/1 111 MICROCIRCUIT/FLASH ATA 32M 5.5V 3.3 ..KDR10961/932 112 UNIT/CXU-10 ..KRY1011856/1 113 BATTERY FUSE UNIT/BFU-32 ..BMG980326/1 114 SET OF MATERIALS/MULTI PORT,-48V/400W RB ..NTM2013097/5 115 OVERVOLTAGE ARRESTER/OVP-TRM1, EXTERNAL ..NCD90126/11 216 ASSEMBLED PARTS/INTERFACE UNIT ..SXK1097489/1 117 SET OF MATERIALS/SMOKE DETECTOR KIT RBS ..NTM2012957/2 118 LOCK/LOCK/KEY CABINET SMB10210/1 1

RBS 2106V3 cabinet equipment 1900 MHz cabinet (Inside cabinet)

18 LOCK/LOCK/KEY, CABINET ..SMB10210/1 119 Intentionally Blank - -20 Intentionally Blank - -21 Intentionally Blank - -22 Intentionally Blank - -23 LABEL/LABEL RBS 2106 V3 ETL ..SVB154600/7 124 CABLE WITH CONNECTOR/SIGNAL CABLE RBS 20 ..RPM777162/02120 125 OVERVOLTAGE ARRESTER/OVP-ALM1, EXTERNAL ..NCD90126/13 426 CABLE WITH CONNECTOR/SIGNAL CABLE GSM SY ..RPM777176/01700 127 OVERVOLTAGE ARRESTER/OVP-TRM1, EXTERNAL ..NCD90126/11 128 CONNECTOR/D-SUB STRAPPING PLUG 90 OHM ..RPT403805/01 129 CABLE WITH CONNECTOR/BATTERY TEMPSENSOR ..RPM777161/01000 130 SET OF MATERIALS/LAMP KIT 2106 V3 ..NTM2012956/8 1

D BBU9500i, 2106, 5 hrs, with climate unit1 SET OF MATERIALS/AGO FOR... .NTM1010726 12 SET OF MATERIALS/EXPANDERBOLTS,M12X90MM ..NTM2012977/2 23 BATTERIES 4 pc12w110ah .BKC90106/12 14 BATTERY/BATTERY 4PC 12V 170 AH ..BKC90106/011 85 POWER EQUIPMENT/AGO FOR BBU 9500I .BMK90185 16 BATTERY CABINET/BBU WITH CLIMATE UNIT ..BAF10202/22 17 POWER EQUIPMENT/AGO FOR BBU 9500I .BMK90185/1 18 SET OF MATERIALS/DC-FILTER ..NTM2013576/1 19 ASSEMBLED PARTS/INTERFACE UNIT ..SXK1097489/1 110 POWER EQUIPMENT/AGO FOR BBU 9500I .BMK90185/2 111 SET OF MATERIALS/CABLE LEAD THROUGH ..NTM2570024/1 112 ACCESSORIES/MARK.TEMPL.FOR BBU9500,GBF92 ..LTY1510544/1 1

0E Aditional Material1 Earthing Cable / Flexible Conductor 35mm2 12 Cable Lug 50 mm 1





Radio base equipment (OLD)Denomination Product code Qty

A RBS 2106i- Outdoor1 EQUIPPED CABINET/2106 V3 MASTER BFM 107 159 12 TRANSCEIVER/DTRU 1900 MHZ EDGE KRC1311004/2 33 INTERFACE UNIT/INSTALLATION INTERFACE 701/BYB41501 1

B Antenna System, 7/8" Feeder1 Single Antenna, X-Pol, 1710-2200 MHz, 65 deg, 18 dBi, MET0-10 KRE 101 1985/1 32 Antenna Downtilt kit 0-10 degree Antenna 1302mm SXA 120 104/4 33 Feeder Marking Set NTM 201 207/1 34 Jumper Cable, 1/2", 2m, 7/16 Male to 7/16 Male, Indoor/Outdoor TSR 951 70/2 65 Jumper Cable, 1/2", 3m, 7/16 Male to 7/16 Male, Indoor/Outdoor TSR 951 70/3 66 EARTH DISTR.CONDUCT./7/8" GROUNDING FOR NGT 901 17/2 127 CONNECTOR/7-16(F) ANDREW POSITIVE STOP C RNT 899 101/1 128 Jointing Sleeve C89, for 16-50/16-50mm2 SNT 102 26 249 Feeder Clamp, 7/8", Profile Mounting 6/NTM 201 230/4 11910 Sealing Set, Feeder Connectors NTM 201 2426 1211 Tie Strap, W=9.5mm, L=457mm, Plastic/Metal SET 145 095/457 3612 7/8 Feeder Cable AVA Sector A FAB 102 943/1 2X512 7/8 Feeder Cable, AVA, Sector A FAB 102 943/1 2X513 7/8 Feeder Cable, AVA, Sector B FAB 102 943/1 2X514 7/8 Feeder Cable, AVA, Sector C FAB 102 943/1 2X5





Radio base equipmentDenomination Product code Qty

C1 COMBINER UNIT/CDU-G 1900 ..BFL119153/1 32 CABLE WITH CONNECTOR/COAXIAL CABLE ..RPM777144/01685 63 SET OF MATERIALS/CDU-G COMBINED CR3 RBS ..NTM2013339/1 34 FRAME/GREY RBS 2106V3 HEAT EXCHANGER ..SEB1121162/03 15 SUBRACK/SUBRACK BACKPLANE TRU ..BFX101107/3 16 CABLE WITH CONNECTOR/SIGNAL CABLE, RBS 2 ..RPM777152/01050 37 CABLE WITH CONNECTOR/SIGNAL CABEL, RBS 2 ..RPM777151/01100 18 CONNECTION CABLE/A3CU, US ..RPM628180/3 19 RECTIFIER/PSU; POWER SUPPLY UNIT ..BML353206/2 410 FUNCTIONAL UNIT/DXU-23 ..BOE60221/1 111 MICROCIRCUIT/FLASH ATA 32M 5.5V 3.3 ..KDR10961/932 112 UNIT/CXU-10 ..KRY1011856/1 113 BATTERY FUSE UNIT/BFU-32 ..BMG980326/1 114 SET OF MATERIALS/MULTI PORT,-48V/400W RB ..NTM2013097/5 115 OVERVOLTAGE ARRESTER/OVP-TRM1, EXTERNAL ..NCD90126/11 216 ASSEMBLED PARTS/INTERFACE UNIT ..SXK1097489/1 117 SET OF MATERIALS/SMOKE DETECTOR KIT RBS ..NTM2012957/2 118 LOCK/LOCK/KEY CABINET SMB10210/1 1

RBS 2106V3 cabinet equipment 1900 MHz cabinet (Inside cabinet)

18 LOCK/LOCK/KEY, CABINET ..SMB10210/1 119 MODULE/TMA-CM 02 ..KRY1011873/3 120 ACCESSORIES/BIAS UNIT 800-2000 MHZ - Sector A ..KRY1011587/1 121 ACCESSORIES/BIAS UNIT 800-2000 MHZ - Sector B ..KRY1011587/1 122 ACCESSORIES/BIAS UNIT 800-2000 MHZ - Sector C ..KRY1011587/1 123 LABEL/LABEL RBS 2106 V3 ETL ..SVB154600/7 124 CABLE WITH CONNECTOR/SIGNAL CABLE RBS 20 ..RPM777162/02120 125 OVERVOLTAGE ARRESTER/OVP-ALM1, EXTERNAL ..NCD90126/13 426 CABLE WITH CONNECTOR/SIGNAL CABLE GSM SY ..RPM777176/01700 127 OVERVOLTAGE ARRESTER/OVP-TRM1, EXTERNAL ..NCD90126/11 128 CONNECTOR/D-SUB STRAPPING PLUG 90 OHM ..RPT403805/01 129 CABLE WITH CONNECTOR/BATTERY TEMPSENSOR ..RPM777161/01000 130 SET OF MATERIALS/LAMP KIT 2106 V3 ..NTM2012956/8 1

D BBU9500i, 2106, 5 hrs, with climate unit1 SET OF MATERIALS/AGO FOR... .NTM1010726 12 SET OF MATERIALS/EXPANDERBOLTS,M12X90MM ..NTM2012977/2 23 BATTERIES 4 pc12w110ah .BKC90106/12 14 BATTERY/BATTERY 4PC 12V 170 AH ..BKC90106/011 85 POWER EQUIPMENT/AGO FOR BBU 9500I .BMK90185 16 BATTERY CABINET/BBU WITH CLIMATE UNIT ..BAF10202/22 17 POWER EQUIPMENT/AGO FOR BBU 9500I .BMK90185/1 18 SET OF MATERIALS/DC-FILTER ..NTM2013576/1 19 ASSEMBLED PARTS/INTERFACE UNIT ..SXK1097489/1 110 POWER EQUIPMENT/AGO FOR BBU 9500I .BMK90185/2 111 SET OF MATERIALS/CABLE LEAD THROUGH ..NTM2570024/1 112 ACCESSORIES/MARK.TEMPL.FOR BBU9500,GBF92 ..LTY1510544/1 1

E Aditional Material1 Earthing Cable / Flexible Conductor 35mm2 12 Cable Lug 50 mm 1

PLANT SPECIFICATION (TRM) Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No


CEP/S/ND&I/N Juan Manuel Payome # A


Transmission equipment (NEW)

N/AN/A

PLANT SPECIFICATION (TRM) Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No


CEP/S/ND&I/N Juan Manuel Payome # A


Transmission equipment (OLD)

A PDH AMM 6P

1 SET OF MATERIALS/AMM 6P C KIT NTM1010158/6 12 SET OF MATERIALS/PFU3 B KIT NTM 101 0653/2 13 CABLE WITH CONNECTOR/4E1,USER I/O,120OHM RPMR10206/2 04 CABLE SET/TFL 424 03, 10M NTM20380/10 15 PANEL/FOR RADIO CABLE, MLE SXK111564/1 06 DUMMY UNIT/ DUMMY UNIT 265MM, IN PACKAGE 033/BFY1130431/W 37 DUMMY UNIT/DUMMY UNIT 115MM, IN PACKAGE 033/BFY 112 0401/W 18 CABLE SET/TFL 424 02. 10M NTM20379/10 09 CABLE WITH CONNECTOR/4XE1,2XUSER OUT,30M RPMR10220/6 110 SEALING SET, FEEDER CONNECTORS NTM2012426 111 Cinchos plásticos12 Termocontráctil

PA00004 - PA00854PDH 0.6 Antenna 18 GHz

1 ANTENNA/ANT2 0.6 18 HP UKY21077/SC15 1PDH Hop 1 + 0 ML TN MMU2, Subband 15

1 MODEM UNIT/MMU2 C KIT .NTM203126/1 12 RADIO UNIT/RAU2 X 18/15 KIT NTM203152/15 13 CABLE WITH CONNECTOR/STATION RADIO CABLE .RPM5176906/01 14 POWER DIVIDER/INT POWER SPLIT 15 GHZ ASY UPA10131/1 -5 MOUNTING SET/SEP KIT RAU2 15 0.90 SXK111608/2 -6 CONTACT SET/N-FEMALE BULKHEAD 7,6 MM CAB SXK111511/26 207 7.6MM Radio Cables (TZC 500 97) NTM203056 388 MOUNTING SET/CLAMP KIT, 7.6 MM NTM203058/12 1x259 TIE STRAP/STAINLESS STEEL L=679 SET12506/1 1

10 EARTHING SET/FOR CABLE D=7.6MM NGT21104/6 211 CABLE STRAP/INDOOR CABLE STRAPS SXK111574/1 112 Feeder Clamp, 7/8", Profile Mounting 6/NTM201230/4 1x2513 GRAPAS 7309021 100 3

ALLOCATION TABLE Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No

Abdiel Lock 193 19-IPB 591 PA00004 Uen Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev. File



AC Mains Fail Fire

BTS door openGenerator ONBattery door openDC/DC C t F lt

Smoke Detector fail

Nc5 4

Nc4 3

2009-03-20

Priority1 0

EXTERNAL ALARM DESIGNATION LIST

Designation Inlet I.D. No/Nc**)

NNc6 5

7 6

3

Nc

Nc2

2 1 Nc

DC/DC Converter Fault

Charge in Net

Over IntensityOver SpeedHigh Water TemperatureEmergency Stop

Alarms designated with *) are optional.**) No (normally open contact) should be defined as closing.

Nc (normally closed contact) should be defined as breaking.

Note:1) Optional alarms only defined on site if required.

Nc7 6NcCLU fault 8 7

Peak SuppresorCharge in Generator 10 9

11 10

1415

13 Nc

NcNc

Nc

Nc

Nc

30% Diesel1314

1212 11

15

9 8Nc

Nc16

SITE INSTALLATION CHECK LIST Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




Date: RBS type:

Testers Name:

RBS Master Cabinet serial number :Climate Unit serial number :

RBS Extension Cabinet serial number :Climate Unit serial number :

-

2009-03-20

Mfg Date:

Site Installation Check ListRBS2000

Mfg Date:

Comments :

--

-

TEST TYPE : PASS *) FAIL *)

Mfg Date:Mfg Date:

*) Please tick the appropriate box.

NETWORK INTEGRATION

INTERNAL ALARM TESTS

INSTALLATION INSPECTION

POWER SYSTEM

OMT / IDB





2009-03-20

PSU 0 PSU 1 PSU 2

PSU 0 PSU 1

PSU 3

MASTER CABINET

PSU 2 PSU 3

SYSTEM VOLTAGE *) :

RBS2000 Site Installation Test POWER SYSTEM

*) Fill in the measured values (V).Note: For 230 V AC power the system voltage should be 26.2-28.5.

Note: Strapping on CCU board to be set according to incoming AC voltage.

*) Fill in the measured values (V).Note: Voltage limits 230 VAC Power Supply: 200 - 240 VAC.

Faulty Bfu-Test Fail

PSU 1 PSU 2 PSU 3

Battery back-up test :

EXTENSION CABINET

MASTER CABINET

PSU 0

INCOMING AC VOLTAGE TEST *)

PSU 0 PSU 1 PSU 2 PSU 3

EXTENSION CABINET





2009-03-20

Stand alone / cascadeDefault value is "62"

Save IDB to Disc for RBSSave Results :

TEI Value **)TNOM set to offVSWR Alarm settings installed

RBS self test OK

PCM set to DS1 "E1" Network Topology *)

Settings Installed :

Read / Modify IDB

Site Installation Test

Install IDB

RBS2000 OMT/IDB

FUNCTION PASSED

*) Fill in stand alone or cascade.**) Fill in the value.

VSWR alarm settings :Cell A

DateDigicel by:

Ericsson by:

Performed for: Signature Print name Title

Save IDB to Disc test records

Class 2 limit Class 1 limit

Cell BCell C

TEST REPORT (ANTENNA TEST) Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




Date: RBS type:

Testers Name:

Anritsu Site Master type:

Visual check:

Installation Check

Visual Check

Serial Number:

ANTENNA TEST RESULTS :

Cell A Cell B

Antenna Test Results

Cell C

RBS2000

2009-03-20

Visual Check

Antenna Direction

Antenna tilt

Type of Antenna

DTF test

DTF Test A:DX A:DX2 B:DX B:DX2 C:DX C:DX2

SWR TestSWR

Remarks

Testers Signature:

DateDigicel by:

Ericsson by:

Performed for: Signature Print name Title

TEST REPORT (NE INTEGRATION TEST) Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




Date: RBS type:

Testers Name:

123

TS 4 TS 5 TS 6TS 0 TS 1

AIR INTERFACE CALL TEST

TRU Cell ID ARFCH BSIC

RBS2000 Network Integration Tests

TS 2 TS 3

2009-03-20

TS 7

3456789

101112

Note:*) When alarm is simulated in OMT, tick off the box with .Frequency Hopping to be disabled to perform this test.

Frequency Hopping Enabled by BSC (if required):

C - A C - B

HANDOVER TEST

A - B A - C B - A B - C






2009-03-20

Define the following External alarms and test with OMT:

AC Mains Fail Fire

BTS door openGenerator ONBattery door openDC/DC Converter Fault

Designation Inlet I.D.

Nc

EXTERNAL ALARM TEST

Nc

Nc

1

Smoke Detector fail4

0 Nc

2 Nc32 1

Priority Passed*)No/Nc

3Nc

8 7

5 4

NCLU f lt7 6 Nc6 5

Charge in Net

Over IntensityOver SpeedHigh Water TemperatureEmergency Stop

Note : Tester to indicate which optional alams are installed.*) When alarm is simulated in OMT, tick off the box with .

9 8 Nc

SEND 1 EXTERNAL ALARM TO BSC:

16 15 Nc

12 11

Nc

Nc

Nc

Nc

15 1414 13

8 7

10

NcCLU fault

Charge in GeneratorPeak Suppresor 11 10

9Nc

13 12 Nc30% Diesel






2009-03-20

TEST PASSED *) TEST PASSED *)

PSU 0 PSU 10PSU 1 PSU 11PSU 2 PSU 12PSU 3 PSU 13DC/DC Alarm DC/DC AlarmFan alarms Fan alarms -

-

---

-

RBS 1 RBS 2

INTERNAL ALARM TEST with OMT

5,15,25,35,45,55,65,75,85,95,105,115,125,135,145,155,165,175,185,19

Digicel by:Title

Ericsson by:

Signature Print name Date

Date Required

Date Cleared

Item:5. PUNCH LIST Respons.

Ericsson Digicel

Performed for:

MINI-LINK TN Functional Test Record Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




Network ElementNE ID: NE Name:

Site ID: Site Name:

Ethernet IP address: Subnet mask:

General Test

Parameter OK Not OK

1 DC supply V V

Parameter2 NE Setup Parameters

PA00004 VILLA LUCRE

Test PFU1/PFU2/ PFU3/NPU2

PFU1/PFU3 (Redundant DC)

Test

2009-03-20

NA

3 Traffic Cable Test4 Traffic Routing Test5 Fan Alarm Test

Additional TestsParameter Not Applicable OK Not OK

6 User In7 User Out8 1+1 E1 SNCP Test9 MSP 1+1 Test

10 DCN and Site LAN Test

Storage of Configuration FileParameter OK Not OK

18 Storage of Configuration File NA

Comments:

Performed byApproved by

Test

Signature Print name Title Date

MINI-LINK TN Functional Test Record Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




2009-03-20

Radio TerminalHop ID: Hop name:

Site ID: Far-end site ID:

Site name: Far-end site name:

Terminal ID: Far-end terminal ID:

Terminal name: Unit position: Far-end terminal name:

Ethernet IP address: Far-end Ethernet IP address:

Subnet mask: Far-end subnet mask:

General TestParameter OK Not OK

11 Hop Setup Parameters

Parameter

12 Trasmitter output power13 RF input level (far-end 1/ far-end 214 Interference test

Parameter15 Near alarm check16 Switch test (For 1+1 configurat. only)

Storage of Configuration FileParameter

17 Performance and BER test

Comments:

Ericsson by:

Signature Print name TitlePerformed for:Digicel by:

Test

Ra1Test

Date

Unit Ra2 (1+1 config. only)

dBm

Test

dBmdBm

Test

TECHNICAL ACCEPTANCE CERTIFICATE Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




Item:GSM antenna rigging conforms to site documentation:

1.1 Antenna A: Azimuth = deg. Tilt = degrees up/down 1.2 Antenna B: Azimuth = deg. Tilt = degrees up/down 1.3 Antenna C: Azimuth = deg. Tilt = degrees up/down 1.4 Feeder cables and jumpers are correctly labeled.1.5 Tie wraps used resistant to the environmental conditions.1.6 Cables are clamped in place at designated points.1.7 Weatherproofing done according to agreed standards. 1.8 RBS cabinet/shelter is secured to foundation1.9 No visual damage or corrosion to cabinet/shelter1.10 Back-Up batteries are installed correctly1.11 Rack earthing is installed as defined1.12 Site grounding installed correctly. No double connection to one hole on ground bar1.13 Resistance reading checked and recorded.1.14 Evidence of corrosion. Galvanized or stainless steel nuts and bolts used.

N/A1. Installation Items

2009-03-20

Description Digicel Accept

A. RBS ACCEPTANCEDigicel

Fail

Evidence of corrosion. Galvanized or stainless steel nuts and bolts used.1.15 Access radio rigging conforms to site documentation1.16 Emergency light is installed in shelter 1.17 Air Conditioner drainage extends away from shelter 1.18 Air Conditioner in shelter is installed and working correctly

1.19

1.20 External socket for emergency generator is installed correctly

Item:

2.1 VSWR Checked and documented2.2 Labeling of all feeders is correct2.3 Earthing of cabinet is installed as defined.2.4 Adequate provisions made for earthing.2.5 PCM cables entering RBS are grounded properly.2.7 Condition of all modules and connectors are good2.8 BER threshold set correctly 10(-6)2.9 Climate Unit (for RBS 2106 only ) is installed and working correctly2.10 Internal and external feeder runs are installed to standard.2.11 Feeders and cables are correctly installed and no excess or short routing is evident.2.12 Cables are supported properly according to standards.2.13

N/ADescription

Commercial power and cabinet/shelter interconnect cable entry is sealed to prevent entry by rodents, etc.

Digicel Accept

Configuration of RBS cabinet is correct. Specify: S + + According to original order/specification.

Digicel Fail2. Ericsson RBS





2009-03-20

Item:3.1 Rectifier/PSU clear of alarms.3.2 All rectifiers/blanking plates are supplied and installed correctly3.3 Rectifier labeling is correct

Item:

4.1 No Documentation provided

4.2 Cable Rack to be grounded

4.3 Fence on site to be grounded at 3 corners

4.4 Generator alarms to be wired

4.5 A/C panel to be labeled and alarm to be wired4.6 Gate alarm to be wired

4.7 Construction issue with fence to be addressed by digicel

Date Cleared

Description Date Required4. Comments & Actions Required

Digicel Fail N/A

Ericsson Respons.

Digicel Accept3. Rectifiers

Description

Item:

5,1

5,2

5,3

5,4

5,5

5,6

5,7

5,8

5,9

5,10

5,11

5,12

5,13

5,14

Title

Date Required

Date ClearedEricsson Digicel

5. PUNCH LIST

Digicel by:

Ericsson by:

Signature DatePerformed for: Print name

Respons.





B. ML - TN SAT ChecklistSite ID: Site Name:

Far-end Site ID & Name:

1. 2. 3. 4. 5. 6.Link Configurations:

1. 2. 3. 4. 5. 6.Host Terminal Ethernet (IP) Adress:

1. 2. 3. 4. 5. 6.Hop ID:

1. 2. 3. 4. 5. 6.Far-end Terminal Ethernet (IP) Adress:

1. 2. 3. 4. 5. 6.

Fail Pass1 Cabinet Earthed2 AMM earthed3 Fan Unit Earthed

Check: Earthing Comments

2009-03-20

4 Radio Cable(s) earthed5 DDU earthed6 RAU(s) earthed

Fail Pass7 Tributary cable(s) neat & secure8 DC Cable(s) neat & secure9 Radio Cable(s) neat & secure 10 Earth Cable(s) neat & secure

Fail Pass

11

12

13

Fail Pass

1415

Fail Pass

16 AMM17 Cables (DC, Earth, Trib, Radio)18 Cables (DC, Earth, Trib, Radio)19 Main DC Breaker20 RAU(s)

Labelling* Comments

Check: Cable Management CommentsSecurely installed & neat (cabinet & tower)Cable Glands water-tight and neat

Check:

Tributary conectors correctly crimped, neat & secureDC Cables correctly crimped, neat & secureEarth Cables correctly crimped, neat & secure

Check: Connectors Comments

Check: Cabling Comments





2009-03-20

Fail Pass

21

22

23

24

25

Fail Pass26 Site Clean & Tidy27 Site Secure28 AC Operational

Comments

Comments

Check: Final Checks

Hop

Link operating according to Path Budget parameters

Commissioning Documentation (incl. Test results & amendments) present and correct.

LCT software tool fully functioning.**

Link installed according to construction file.

Check:

On-site hop documentation (incl. Site file & log book) completed.

29 Alarms Clear

Notes:

C. TECHNICAL SITE ACCEPTANCE

This document has been completed and signed off by:

Fail Pass

DateDigicel by:

Performed for:

COMMENTS:Overall Test Result

Ericsson by:

Signature Print name Title

FINAL ACCEPTANCE CERTIFICATE Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




This is to certify that Ericsson Radio System has delivered and testedthe RBS/PDH Network Element PA00004 to the satisfaction ofDigicel Panama

Further reference should be made with remarks per attached testt

PA00004, VILLA LUCRE

FINAL ACCEPTANCE CERTIFICATE

2009-03-20

Date:

Name: Name:

Signature: Signature:

Digicel Ericsson

report.

ABBREVIATION LIST Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No




ABBREVIATION LIST

RBS Radio Base StationTRU Transceiver UnitdTRU duplex Transceiver UnitCDU Combining and Distribution UnitBBS Battery Backup SystemBFU Battery Fuse UnitDFU Distribution and Fuse UnitEDT Electrical Down TiltTMA Tower Mounted AmplifierddTMA Dual Duplex TMAESB External Synchronization BusPCM Pulse Code ModulationRD Receive DataTD Transmit Data

2009-03-20

ACCU Alternating Current Connection UnitFCU Fan Control UnitDF Distribution FrameA:DX1/DX2 Duplex antenna 1 and 2 in cell Am.a.g.l. Metre above ground levelht.a.fl.l. Height above floor levelAMM Access Module MagazineDDU DC Distribution UnitMMU Modem UnitNCC Node Communication ChannelRAU Radio UnitSMU Switch Multiplexer UnitTMR Transmission Rack

DDF Digital Distribution Frame

Date post:	07-Dec-2015
Category:	Documents
Upload:	marco
View:	44 times
Download:	7 times

Pa00004 Modulo c - Expansion - Villa Lucre

Documents