Proposal Example

ASH02 PHASE 1 DATA CENTER

January 22, 2015

VALUE PROPOSITION

Graybar provides competitively priced proposals with superior engineering and project management support. Our local team offers extensive market experience and product knowledge that other distributors may not provide. Another benefit of working with Graybar is we will share liability and negotiate terms and conditions. Graybar helps your company overcome inaccurate product

installation and field modifications with Square D bill of

material evaluations that will minimize change order

requirements.

We can contribute value by assisting in the design, product

placement and value engineering options of your electrical

projects.

CONTENTS

• PRICED PROPOSAL

• LATISYS RFP PRICING & LEADTIME

• CLARIFICATIONS

o Startup

o Training

o Warranty

• SQUARE D BILL OF MATERIAL

o Clarifications

• COOPER PADMOUNT TRANSFORMER

o Bill of Material

o Drawings

PRICED PROPOSAL

1375 WEST 47TH AVENUEDENVER CO 80211-2318

Phone: 303-480-3035Fax: 303-477-1582

To: LATISYS-DENVER, LLC393 INVERNESS PARKWAYENGLEWOOD CO 80112-5866

Attn: Eric BusbyPhone: 303-268-1470Fax: 303-317-7910Email: [email protected]

Date: 01/22/2015Proj Name: ASHBURN - SCHNEIDERGB Project Qte#: 221853088Valid From: 01/21/2015Valid To: 02/20/2015Contact: BRETT MARTINACEmail: [email protected]

ProposalWe Appreciate Your Request and Take Pleasure in Responding As Follows

Item Quantity Supplier Catalog Nbr Description Price Unit Ext.Price

100 1 EA SQUARE D CO. LOT SQUARE DCOMPANY Q2C35917376

Please see attachedBOM

Please note thefollowing:

Cooper PowerSystems ProposalBED1533013 - Pages2-3 Exceptions andClarifications

$973,664.88 1 $973,664.88

________________________________________________________________________________________________________________

200 1 EA COOPER POWERTransformer 3A - Seenotes below

See Cooper ProposalBED1533013

See Cooper DrawingDTM1RYNM

$47,406.37 1 $47,406.37

________________________________________________________________________________________________________________

300 1 EA COOPER POWERTransformer 3B - Seenotes below

See Cooper ProposalBED1533013

See Cooper DrawingDTM1RYNM

$47,406.37 1 $47,406.37

________________________________________________________________________________________________________________

Subject to the standard terms and conditions set forth in this document. Unless otherwise noted,freight terms are F.O.B. shipping point prepaid and bill.

Unless noted the estimated ship date will be determined at the time of order placement.

This equipment and associated installation charges may be financed for a low monthly payment through Graybar Financial Services (subject to credit approval). For more information call 1-800-241-7408

to speak with a leasing specialist.

To learn more about Graybar, visit our website at www.graybar.com 24-Hour Emergency Phone#: 1-800-GRAYBAR

Page 1 of 2

www.graybar.com

DentoPB

Typewritten Text

DentoPB

Typewritten Text

ASH02 SWGR

To: LATISYS-DENVER, LLC393 INVERNESS PARKWAYENGLEWOOD CO 80112-5866

Attn: Eric Busby

Date: 01/22/2015Proj Name: ASHBURN - SCHNEIDERGB Project Qte#: 221853088

ProposalWe Appreciate Your Request and Take Pleasure in Responding As Follows

Item Quantity Supplier Catalog Nbr Description Price Unit Ext.Price

Total in USD (Tax not included): $1,068,477.62

GRAYBAR ELECTRIC COMPANY, INC.TERMS AND CONDITIONS OF SALE

1. ACCEPTANCE OF ORDER; TERMINATION - Acceptance of any order is subject to credit approval and acceptance of order by Graybar Electric Company, Inc. ("Graybar") and, when applicable, Graybar's suppliers.If credit of the buyer of the goods ("Buyer") becomes unsatisfactory to Graybar, Graybar reserves the right to terminate upon notice to Buyer and without liability to Graybar.

2. PRICES AND SHIPMENTS - Unless otherwise quoted, prices shall be those in effect at time of shipment, which shall be made F.O.B. shipping point, prepaid and bill.

3. RETURN OF GOODS - Credit may be allowed for goods returned with prior approval. A deduction may be made from credits issued to cover cost of handling.

4. TAXES - Prices shown do not include sales or other taxes imposed on the sale of goods. Taxes now or hereafter imposed upon sales or shipments will be added to the purchase price. Buyer agrees to reimburse Graybarfor any such tax or provide Graybar with acceptable tax exemption certificate.

5. DELAY IN DELIVERY - Graybar is not to be accountable for delays in delivery occasioned by acts of God, failure of its suppliers to ship or deliver on time, or other circumstances beyond Graybar's reasonablecontrol. Factory shipment or delivery dates are the best estimates of our suppliers, and in no case shall Graybar be liable for any consequential or special damages arising from any delay in shipment or delivery.

6. LIMITED WARRANTIES - Graybar warrants that all goods sold are free of any security interest and will make available to Buyer all transferable warranties (including without limitation warranties with respect tointellectual property infringement) made to Graybar by the manufacturer of the goods. GRAYBAR MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, AND SPECIFICALLY DISCLAIMS ALL IMPLIEDWARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE. UNLESS OTHERWISE AGREED IN WRITING BY ANAUTHORIZED REPRESENTATIVE OF GRAYBAR, PRODUCTS SOLD HEREUNDER ARE NOT INTENDED FOR USE IN OR IN CONNECTION WITH (1) ANY SAFETY APPLICATION OR THECONTAINMENT AREA OF A NUCLEAR FACILITY, OR (2) IN A HEALTHCARE APPLICATION, WHERE THE GOODS HAVE POTENTIAL FOR DIRECT PATIENT CONTACT OR WHERE A SIX (6)FOOT CLEARANCE FROM A PATIENT CANNOT BE MAINTAINED AT ALL TIMES.

7. LIMITATION OF LIABILITY - Buyer's remedies under this agreement are subject to any limitations contained in manufacturer's terms and conditions to Graybar, a copy of which will be furnished upon writtenrequest. Furthermore, Graybar's liability shall be limited to either repair or replacement of the goods or refund of the purchase price, all at Graybar's option, and IN NO CASE SHALL GRAYBAR BE LIABLE FORINCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES. In addition, claims for shortages, other than loss in transit, must be made in writing not more than five (5) days after receipt of shipment.

8. WAIVER - The failure of Graybar to insist upon the performance of any of the terms or conditions of this agreement or to exercise any right hereunder shall not be deemed to be a waiver of such terms, conditions, orrights in the future, nor shall it be deemed to be a waiver of any other term, condition, or right under this agreement.

9. MODIFICATION OF TERMS AND CONDITIONS - These terms and conditions supersede all other communications, negotiations, and prior oral or written statements regarding the subject matter of these terms andconditions. No change, modification, rescission, discharge, abandonment, or waiver of these terms and conditions shall be binding upon Graybar unless made in writing and signed on its behalf by a duly authorizedrepresentative of Graybar. No conditions, usage of trade, course of dealing or performance, understanding or agreement, purporting to modify, vary, explain, or supplement these terms and conditions shall be bindingunless hereafter made in writing and signed by the party to be bound. Any proposed modifications or additional terms are specifically rejected and deemed a material alteration hereof. If this document shall be deemed anacceptance of a prior offer by Buyer, such acceptance is expressly conditional upon Buyer's assent to any additional or different terms set forth herein.

10. REELS - When Graybar ships returnable reels, a reel deposit may be included in the invoice. The Buyer should contact the nearest Graybar service location to return reels.

11. CERTIFICATION - Graybar hereby certifies that these goods were produced in compliance with all applicable requirements of Sections 6, 7, and 12 of the Fair Labor Standards Act, as amended, and of regulations andorders of the United States Department of Labor issued under Section 14 thereof. This agreement is subject to Executive Order 11246, as amended, the Rehabilitation Act of 1973, as amended, the Vietnam Veterans'Readjustment Assistance Act of 1974, as amended, E.O. 13496, 29 CFR Part 471, Appendix A to Subpart A, and the corresponding regulations, to the extent required by law. 41 CFR 60-1.4, 60-741.5, and 60-250.5 areincorporated herein by reference, to the extent legally required.

12. FOREIGN CORRUPT PRACTICES ACT - Buyer shall comply with applicable laws and regulations relating to anti-corruption, including, without limitation, (i) the United States Foreign Corrupt Practices Act(FCPA) (15 U.S.C. §§78dd-1, et. seq.) irrespective of the place of performance, and (ii) laws and regulations implementing the Organization for Economic Cooperation and Development's Convention on CombatingBribery of Foreign Public Officials in International Business Transactions, the U.N. Convention Against Corruption, and the Inter-American Convention Against Corruption in Buyer's country or any country whereperformance of this agreement or delivery of goods will occur.

13. ASSIGNMENT - Buyer shall not assign its rights or delegate its duties hereunder or any interest herein without the prior written consent of Graybar, and any such assignment, without such consent, shall be void.

14. GENERAL PROVISIONS - All typographical or clerical errors made by Graybar in any quotation, acknowledgment or publication are subject to correction. This agreement shall be governed by the laws of the State ofMissouri applicable to contracts to be formed and fully performed within the State of Missouri, without giving effect to the choice or conflicts of law provisions thereof. All suits arising from or concerning this agreementshall be filed in the Circuit Court of St. Louis County, Missouri, or the United States District Court for the Eastern District of Missouri, and no other place unless otherwise determined in Graybar's sole discretion. Buyerhereby irrevocably consents to the jurisdiction of such court or courts and agrees to appear in any such action upon written notice thereof.

15. PAYMENT TERMS - Payment terms shall be as stated on Graybar's invoice or as otherwise mutually agreed. As a condition of the sales agreement, a monthly service charge of the lesser of 1-1/2% or the maximumpermitted by law may be added to all accounts not paid by net due date. Visa, MasterCard, American Express, and Discover credit cards are accepted at point of purchase only.

16. EXPORTING - Buyer acknowledges that this order and the performance thereof are subject to compliance with any and all applicable United States laws, regulations, or orders. Buyer agrees to comply with all suchlaws, regulations, and orders, including, if applicable, all requirements of the International Traffic in Arms Regulations and/or the Export Administration Act, as may be amended. Buyer further agrees that if the exportlaws are applicable, it will not disclose or re-export any technical data received under this order to any countries for which the United States government requires an export license or other supporting documentation at thetime of export or transfer, unless Buyer has obtained prior written authorization from the United States Office of Export Control or other authority responsible for such matters.

Signed:___________________________________

Subject to the standard terms and conditions set forth in this document. Unless otherwise noted,freight terms are F.O.B. shipping point prepaid and bill.

Unless noted the estimated ship date will be determined at the time of order placement.

This equipment and associated installation charges may be financed for a low monthly payment through Graybar Financial Services (subject to credit approval). For more information call 1-800-241-7408

to speak with a leasing specialist.

To learn more about Graybar, visit our website at www.graybar.com 24-Hour Emergency Phone#: 1-800-GRAYBAR

Page 2 of 2

www.graybar.com

LATISYS RFP PRICING & LEADTIME

Pending line item pricing from Square D. Leadtimes to be committed with factory schedule based upon confirmed order entry date. Per Dmitriy Khazansky, a May shipment is still possible with order conversion by 1/30/15.

CLARIFICATIONS

Startup is included per pre-negotiated scope with Square D. Phase 1 – Product Services Startup Phase 2 – PLC Startup Training is not included. An additional daily rate will be provided for training. Standard 2-year warranty from shipment is included with Square D services startup. The padmount transformers are quoted as Cooper Transformers and are not inclusive in the Square D bill of material. Graybar will be providing a separate quote on the S & C Vista switch. Surge suppression devices can be supplied by Graybar; these units are not included in the proposal and are pre-purchased by Latisys.

SQUARE D BILL OF MATERIAL

• Clarifications

PAGE 1 OF 35

BILL OF MATERIAL

Latisys – Ashburn

Q2C Number: 35917376 Quote Number: 1 Revision Number: 0

Project Name: LATISYS ASHBURN

Project Location: ASHBURN, VA

Bid Date: 01/16/2015

Sales Representative: DMITRIY KHAZANSKY (925) 353 8061

Terms & Conditions

This Quotation is subject to Schneider Electric USA, Inc.'s published Terms and Conditions

Terms: STANDARD

Quote Markings

Main differences between this quote and Chicago are as follows:

• Addition of load bank switchboard: hardware + services + automation

• Additional breakers in MSB: hardware + services

• Double lug connection on specified breakers: larger gear + hardware

• Inclusion of specified lugs and accounting for double lugs

Added panelboard, removed shunt trips and receptacle.

BILL OF MATERIAL

This quotation was prepared based on Schneider Electric's best interpretation of the plans and specifications provided. However, due to corporate engineering and manufacturing practices, product availability and design limitations, strict adherence to the plans and specifications may not be possible. It is the customer’s responsibility to fully review this bill of material for accuracy and compliance with the contract drawings. Please note the following clarifications: 1. This bill of material is the full extent of the Schneider Electric product offering for this project. Any item not

specifically listed is not included. 2. Fuses and spare parts are not included unless shown with equipment on bill of material. 3. All equipment will be supplied in NEMA 1 enclosures unless otherwise indicated. 4. All equipment will be supplied with Schneider Electric standard paint unless indicated otherwise. 5. Low voltage dry type transformers do not include lugs and external vibration pads. 6. Starter thermal units (heaters) are not included unless specifically indicated 7. Special services such as factory witness tests, field tests, programming, software installations, start up,

commissioning, training, short circuit or coordination studies are not included unless shown as a separate line item.

8. Seismic Calculations and/or Seismic reports to determine bolt sizes and depth are not included. Seismic qualifications for equipment are available upon request.

9. Standard shipping lead times apply unless otherwise noted. 10. Schneider Electric standard lug termination and ground bars will be supplied on all switchboards and

panelboards unless indicated otherwise. 11. Designation nameplates for dry type transformers, disconnects, enclosed breakers, starters and other

common merchandise products are not included and are to be supplied by others. 12. All equipment is sold F.O.B. point of shipment, freight prepaid and included in the price to the first

common carrier point in the United States, except Alaska and Hawaii. F.O.B. destination terms are available at an additional cost of 2% of the total project value.

13. All taxes and tariffs are specifically excluded from this quotation. 14. Our proposal does NOT address any Buy America requirements. If this project is subject to Buy America

requirements, we will need more information and/or time to evaluate.

LEAD TIME ARO (After Release of Order): Additional time for engineering of approval drawings and approval process must be accounted for.

This bill of material when accompanies by a price is offered for sale under the Schneider Electric Standard Conditions of Sale (a copy of which is available upon request). This quotation is valid for 30 calendar days.

PAGE 3 OF 35


Project Name: LATISYS ASHBURN Quote Name: LATISYS ASHBURN

Item No.

Qty.

Catalog Number / Details

BILL OF MATERIAL

001-00 1 Designation: MS-3A

Square D Custom Swbd QED Switchboard --------------------------------- Square D Custom Swbd Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480Y/277V 3Ph 4W 60Hz Source Description - Single Main System Ampacity - 3000A Bussing - Silver Plated Copper Neutral Bus - 100% Max Available Fault Current (RMS) - 100kA Enclosure - Type 3R Non-Walk-in Accessibility: Front Only Equipment Nameplate Gray Surface/White Letters, Adhesive (Field Installed) Rodent Barrier Exterior Paint Color - ANSI 49 Copper Ground Bus Interior Lights - Main Section only Ground Lug provided for each device Barriers between Sections Strip Heaters - Wired with Thermostat Lineup 1 BTU: 8888 Communications Network Options - Network Communications Only Communications Network Options- Modbus RS485 Comms Wired Out Specials: 120V OUTLET FOR LBB V SENSING Specials: DCS ENGINEERING Special 120V OUTLET FOR LBB V SENSING #: 4031241 Special DCS ENGINEERING #: NOTE Dimensions --------------------------------- 2 - 36" Wide Section(s) 1 - Dimensions: 72.00" W X 47.5" D X 91.5"H 2 - 47.5" Deep Enclosure(s) Approximate Weight: 2065.00 lbs / 936.68 kgs Incoming Requirements --------------------------------- UL Dead Front Entry Point: Left of Lineup, Through the Bottom Connection Type: Cable in Bussed Auxiliary Incoming Lug Type: Copper Compression Lug/Copper Cable Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS GROUND 400KCMIL YA322N Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS GROUND 400KCMIL YA322N #: NOTE Mains --------------------------------- 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type NW

PAGE 4 OF 35



Item No.

Qty.


BILL OF MATERIAL

Ammeter Trip Unit, Long Time, Short Time, Instantaneous, Ground Fault Zone Interlocking, Ground Fault Circuit Breaker Modbus Communications Wired Overcurrent Trip Switch 1A/1B Form C Contact (SDE) Auxiliary Switches 4A-4B Cover over Open/Close Buttons Contact Wear Indication - Visual Load Lug Type: Copper Compression Lug/Copper Cable Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS GROUND 400KCMIL YA322N Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS GROUND 400KCMIL YA322N #: NOTE Estimated Ship Days (ARO): 60 Working Days

002-00 1 Designation: BUS TAP CAN

STAND ALONE AUXILIARY SECTION Stand Alone Auxiliary Section --------------------------------- Square D Power Style Auxiliary Section Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480V 3Ph 3W 60Hz System Ampacity - 3000A Bussing - Silver Plated Copper Max Available Fault Current (RMS) - 18kA Enclosure - Type 1 Accessibility: Front Only Equipment Nameplate Gray Surface/White Letters, Adhesive (Field Installed) Exterior Paint Color - ANSI 49 Copper Ground Bus Ground Lug provided for each device Lineup 1 BTU: 5614 Certified Test Report Required Specials: 3000A BUSWAY CONNECTION Specials: LUG PADS IN Specials: PHASING & ORIENTATION ABC F-R Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS 1 4W Grd400kcmil YA322N Special 3000A BUSWAY CONNECTION #: 5230441 Special LUG PADS IN #: 5230441 Special PHASING & ORIENTATION ABC F-R #: 5230441 Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS 1 4W Grd400kcmil YA322N #: NOTE Dimensions --------------------------------- 1 - 36" Wide Section(s) 1 - 36" Deep Enclosure(s) Dimensions: 36.00" W X 36" Max D X 91.5" H Approximate Weight: 690.00 lbs / 312.98 kgs Incoming Requirements

PAGE 5 OF 35



Item No.

Qty.


BILL OF MATERIAL

--------------------------------- UL Dead Front Entry Point: Left of Lineup Through the Bottom Connection Type: Cable Unbussed Pull Section Incoming Lug Type: Copper Compression Lug/Copper Cable Outgoing Requirements --------------------------------- Connection Type: Cable Load Lug Type: Copper Compression Lug/Copper Cable Estimated Ship Days (ARO): 60 Working Days

003-00 1 Designation: Busway, 3000A

I-LINE BUSWAY I-LINE BUSWAY CONSISTING OF ---------------------------------------------- 3000A Copper/Silver Busway 480V 3Ph 3W 60Hz Ground Bus Reqmt: Copper Integral Ground 100kA Feeder / 125kA Plug-in RMS Symmetrical Short Circuit Rating Date Configured: 12/18/2014 7:17:33 PM Indoor Segment Run Consisting of: ---------------------------------------------- 85 Feet of Feeder Busway 3 Flanged Ends 1 End Cable Tap Box 4 90 Degree Elbows 2 Indoor Copper Tees 1 End Closures 13 Indoor Fixed Hangers 3 Assembly Tools Estimated Ship Days (ARO): 30 Working Days

004-00 1 Designation: MSB-3A

QED-6 SWITCHBOARD LOW VOLTAGE SWITCHGEAR **** Consult Factory for Delivery **** All Section Bussing Sized to the System Bus Ampacity Single Main With Feeders 480/277V,3PH-4W,60HZ 4000A Copper Main Bus Solidly Grounded Neutral 5KVA Control Power Transformer 100kA Maximum Available Fault Current Indoor NEMA 1 Style Enclosure ANSI 49 Exterior Color Paint Network Communications Only - No Web Pages RS485 Modbus Comms Wired Out Hand Held Breaker Test Kit 3 Wire Equipment, Neutral Grounded at Source 24VDC to Trip Unit Display ZSI Wiring on All Breakers White Back Pans

PAGE 6 OF 35



Item No.

Qty.


BILL OF MATERIAL

Certified Test Reports Special Records: TAG NOTE - 1 - GREY SURF/WHITE LTR NAMEPLATE TAG SW-5 - 6 - 3000A CROSSBUS ENCLOSURE OPTIONS 6 - Section(s) with 4000A, Thermal Silver Flashed Vertical Bus 2 - 36", 4000A, 3W, Indoor Vertical Section 6 - 72" Deep Enclosure 6 - Bus Bracing - 100kA 6 - Rear Barriers Between Bus/Cable Compartment 5 - Bus Compartment Side Barriers 6 - Locking Hinged Rear Doors 6 - Plastic Mimic Bus - Black 5 - Cable Compartment Side Barriers 1 - 22", 4000A, 3W, Indoor Vertical Section 5 - Cable Supports 3 - 30", 4000A, 3W, Indoor Vertical Section INCOMING ONE: CONNECTIONS & METERING OPTIONS Freestanding Cable Fed - Bottom Incoming Non-Service Entrance 4000A 3W NEMA 2 Compression 2-Hole 500MCM Lugs MAIN ONE: CIRCUIT BREAKER 4000A, NW40H, Electrically Operated Main Breaker DESCRIPTION: GENERATOR 3A Ammeter Unit (5.0A), LSI Modbus Communications - Main/Tie Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 3000 86 Relay (Lockout) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Shunt Close - Electrically Operated Main Electric Reset (RES) Breaker ID Nameplate - Main Closing Coil (XF) Status Indicating Lights - Open/Close Breaker Padlock Attachment on Circuit Breaker Shunt Trip - Electrically Operated Main Undervoltage Trip: Adjustable Time Delay (MN) Spring Charging Motor (MCH) 12A Form C Contacts Auxiliary Switch Metering CTs Cell - 1 BC Special Records: TAG NOTE - 1 - PUT AS SECTION 2 OF LINEUP TAG 3672712 - 1 - CUSTOM LUG PADS TAG 3672712 - 2 - 8 SETS 3 500KCMIL PHASE YA342N TAG NOTE - 2 - 8 SETS GROUND 400KCMIL YA322N FEEDER CIRCUIT BREAKERS & INSTRUMENTATION Shunt Trip - Electrically Operated Feeder 3000A, NW30H, Electrically Operated Feeder

PAGE 7 OF 35



Item No.

Qty.


BILL OF MATERIAL

Breaker DESCRIPTION: UTILITY 3A Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 3000 86 Relay (Lockout) Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Undervoltage Trip: Adjustable Time Delay (MN) Shunt Close - Electrically Operated Feeder 1 Kirk Key Interlock on Feeder Breaker ZSI Restraint to Main Closing Coil (XF) Electric Reset (RES) 12A Form C Contacts Auxiliary Switch 3000A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 2 BC Special Records: TAG 3672712 - 1 - 8 SETS 3 500KCMIL PHASE YA342N TAG NOTE - 1 - 8 SETS GROUND 400KCMIL YA322N TAG NOTE - 1 - PUT AS SECTION 1 OF LINEUP Shunt Trip - Electrically Operated Feeder 4000A, NW40H, Electrically Operated Feeder Breaker DESCRIPTION: GENERATOR 3S Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 3000 86 Relay (Lockout) Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Undervoltage Trip: Adjustable Time Delay (MN) Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) Electric Reset (RES) 12A Form C Contacts Auxiliary Switch 3000A, 3W, Copper, Qwik Flange Busway, ABC F-R Status Indicating Lights - Open/Close Metering CTs Cell - 3 BC Special Records: TAG 3672712 - 2 - 8 SETS 3 500KCMIL PHASE

PAGE 8 OF 35



Item No.

Qty.


BILL OF MATERIAL

YA342N TAG NOTE - 2 - 8 SETS GROUND 400KCMIL YA322N TAG 3672712 - 1 - CUSTOM LUG PADS 2000A, NW20H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 2000 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 2000A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 A Special Records: TAG 3672712 - 1 - 6 SETS 3 400KCMIL PHASE YA322N TAG 3672712 - 1 - 6 SETS GROUND 250KCMIL YA292N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 B Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder

PAGE 9 OF 35



Item No.

Qty.


BILL OF MATERIAL

Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 C Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 D Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 2000A, NW20H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 2000 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 2000A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 A Special Records: TAG 3672712 - 1 - 6 SETS 3 400KCMIL PHASE YA322N TAG 3672712 - 1 - 6 SETS GROUND 250KCMIL YA292N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION:

PAGE 10 OF 35



Item No.

Qty.


BILL OF MATERIAL

Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 B Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 C Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 D Special Records:

PAGE 11 OF 35



Item No.

Qty.


BILL OF MATERIAL

TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N Shunt Trip - Electrically Operated Feeder 1600A, NW16H, Electrically Operated Feeder Breaker DESCRIPTION: MDP-3A Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 6 A Special Records: TAG 3672712 - 2 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 2 - 3 SETS GROUND 1/0 YA252N TAG 3672712 - 1 - CUSTOM LUG PADS Shunt Trip - Electrically Operated Feeder 1600A, NW16H, Electrically Operated Feeder Breaker DESCRIPTION: MDP-3B Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 6 B Special Records: TAG 3672712 - 1 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 1 - 3 SETS GROUND 1/0 YA252N Shunt Trip - Electrically Operated Feeder 1600A, NW16H, Electrically Operated Feeder

PAGE 12 OF 35



Item No.

Qty.


BILL OF MATERIAL

Breaker DESCRIPTION: CH-6-1 Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 6 C Special Records: TAG 3672712 - 2 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 2 - 3 SETS GROUND 1/0 YA252N TAG 3672712 - 1 - CUSTOM LUG PADS 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: CH-6-2 Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 6 D Special Records: TAG 3672712 - 1 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 1 - 3 SETS GROUND 1/0 YA252N Estimated Ship Days (ARO): 80 Working Days

005-00 1 Designation: MSB-3A CONTROL SECT

QED-6 SWITCHBOARD LOW VOLTAGE SWITCHGEAR **** Consult Factory for Delivery **** Feeder Section(s) - (Main is Remote) 480/277V,3PH-4W,60HZ 3000A Copper Main Bus Solidly Grounded Neutral 100kA Maximum Available Fault Current

PAGE 13 OF 35



Item No.

Qty.


BILL OF MATERIAL

Indoor NEMA 1 Style Enclosure ANSI 49 Exterior Color Paint 3 Wire Equipment, Neutral Grounded at Source White Back Pans Special Records: TAG NOTE - 1 - GREY SURF/WHITE LTR NAMEPLATE ENCLOSURE OPTIONS 1 - Section(s) with 3000A, Thermal Silver Flashed Vertical Bus 1 - 36", 3000A, 3W, Indoor Vertical Section 1 - 72" Deep Enclosure 1 - Bus Bracing - 100kA 1 - Rear Barriers Between Bus/Cable Compartment 1 - Bus Compartment Side Barriers 1 - Cable Compartment Side Barriers INCOMING ONE: CONNECTIONS & METERING OPTIONS Freestanding Connection to Existing PZ4/QED6 Non-Service Entrance Connection to Existing: PZ4 / QED6 FEEDER CIRCUIT BREAKERS & INSTRUMENTATION Customer Instrumentation Compartment, 2-Cells Cell - 1 AB Customer Instrumentation Compartment, 2-Cells Cell - 1 CD Estimated Ship Days (ARO): 50 Working Days

006-00 1 Designation: MDP-3A

ILINE ML PNLB (INT,BOX,TRIM) I-Line Panelboard Consisting of 480V 3Ph 3W 60Hz Wye Grounded SCCR: 65kA Fully Rated Main Lug Only: 800A Main Acc: Cu Compression Lugs Cu Cable Incoming Conductors: 3 - 250 - 500 kcmil Bus: Copper: Tin Plated CU Ground Bar 63" of Mounting Inches Type 1,Box: 73H x 32W x 8.25D Incoming: Bottom Trim: Surface with Door Box Cat No: HC3273B Ref. Drawing: PBA402 Type: HCM Feeders: 3 - 20A/3P HJ 1 - 80A/3P HJ 6 - 90A/3P HJ 1 - 225A/3P JJ 1 - 60A/3P HJ 1 - 125A/3P HJ Optional Features: Ship Together,Copper Ground Bar,Standard Mains and Feeders Mechanically Restrained Special Equipment Nameplate:

PAGE 14 OF 35



Item No.

Qty.


BILL OF MATERIAL

Engraved as Follows Line 1: MDP-3A Size: 3.50" Wide x 1.00" High (Std) Special Color: GREY SURF / WHITE LETTERS Plastic/Adhesive - Screw-on Estimated Ship Days (ARO): 15 Working Days

009-00 1 Designation: MDP-3A1-1

NQ ML PNLB (INT,BOX,TRIM) - A NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Main Lug Only: 400A Main Acc: Sub-Feed Lugs Incoming Conductors: 1 - 1/0 - 600 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior Type 1,Box: 50H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH50 Front Cat No: NC50VSHR Ref. Drawing: PBA709HR Feeders: 26 - 20A/1P QOB 9 - 20A/1P QOB-GFI 5 - 30A/1P QOB 1 - 30A/2P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Group User Placement Special Equipment Nameplate: Engraved as Follows Line 1: MDP-3A1-1 Size: 3.50" Wide x 1.00" High (Std) Special Color: GREY SURF / WHITE LETTERS Plastic/Adhesive - Screw-on Estimated Ship Days (ARO): 15 Working Days


NQ ML PNLB (INT,BOX,TRIM) - B NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Main Lug Only: 400A Main Acc: Sub-Feed Lugs Incoming Conductors: 1 - 1/0 - 600 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior Type 1,Box: 50H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH50 Front Cat No: NC50VSHR Ref. Drawing: PBA709HR Feeders: 4 - 100A/3P QOB 30 - 20A/1P QOB Prepared Space

PAGE 15 OF 35



Item No.

Qty.


BILL OF MATERIAL

Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Group User Placement Special Equipment Nameplate: Engraved as Follows Line 1: MDP-3A1-1 Size: 3.50" Wide x 1.00" High (Std) Special Color: GREY SURF / WHITE LETTERS Plastic/Adhesive - Screw-on Estimated Ship Days (ARO): 15 Working Days


NQ ML PNLB (INT,BOX,FRT) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Main Lug Only: 125A Incoming Conductors: 1 - #6 - 350 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior Type 1,Box: 38H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH38 Front Cat No: NC38SHR Ref. Drawing: PBA701HR Feeders: 3 - 100A/3P QOB Prepared Space 7 - 30A/1P QOB 1 - 30A/2P QOB 16 - 20A/1P QOB 4 - 25A/2P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Group User Placement Special Equipment Nameplate: Engraved as Follows Line 1: MDP-3A1-2 Size: 3.50" Wide x 1.00" High (Std) Special Color: GREY SURF / WHITE LETTERS Plastic/Adhesive - Screw-on Estimated Ship Days (ARO): 15 Working Days

012-00 1 Designation: CDP-3A

Square D Custom Swbd QED Switchboard --------------------------------- Square D Custom Swbd Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480V 3Ph 3W 60Hz Source Description - Main is Remote System Ampacity - 2000A Bussing - Silver Plated Copper Max Available Fault Current (RMS) - 65kA Enclosure - Type 1 Accessibility: Front and Rear

PAGE 16 OF 35



Item No.

Qty.


BILL OF MATERIAL

Equipment Nameplate Gray Surface/White Letters, Screw-on (Factory Installed) Exterior Paint Color - ANSI 49 Ground Lug provided for each device Copper Ground Bus Barriers between Sections Lineup 1 BTU: 13255 Communications Network Options - Network Communications Only Communications Network Options- Modbus RS485 Comms Wired Out Certified Test Report Required Specials: BASLER BE3-25 SYNCH CHECK Specials: CUSTOM RELAY DOOR Specials: KIRK KEY SKRU Specials: FEEDERS TO MAIN Specials: FRONT ACCESS Specials: DCS ENGINEERING Special BASLER BE3-25 SYNCH CHECK #: 4031241 Special CUSTOM RELAY DOOR #: 4031241 Special KIRK KEY SKRU #: 4031241 Special FEEDERS TO MAIN #: NOTE Special FRONT ACCESS #: NOTE Special DCS ENGINEERING #: NOTE Dimensions --------------------------------- 2 - 36" Wide Section(s) 1 - 48" Wide Section(s) 3 - 36" Deep Enclosure(s) Dimensions: 120.00" W X 36" Max D X 91.5" H Approximate Weight: 3089.00 lbs / 1401.17 kgs Incoming Requirements --------------------------------- UL Dead Front Entry Point: Left of Lineup, Through the Bottom Connection Type: Cable Incoming Lug Type: Copper Compression Lug/Copper Cable Feeders --------------------------------- Devices Associated with Remote Main: 2 - 2000AS/2000AT 480V 80% Rated 65 kA 3 Pole UL, Fixed Mounted Electronic Trip Circuit Breaker: Type RK Ammeter Trip Unit, Long Time, Instantaneous Circuit Breaker Modbus Communications Wired Kirk Key Interlock Load Lug Type: Copper Compression Lug/Copper Cable Specials: 6 SETS -3 400KCMIL LUGS YA322N Specials: 6 - 250KCMIL GROUND YA292N Special 6 SETS -3 400KCMIL LUGS YA322N #: 4031241 Special 6 - 250KCMIL GROUND YA292N #: NOTE 1 - 600AS/225AT 480V 80% Rated 65 kA 3 Pole

PAGE 17 OF 35



Item No.

Qty.


BILL OF MATERIAL

UL, Group Mounted Electronic Trip Circuit Breaker: Type LJ Standard Trip Unit, Long Time, Instantaneous 9 - 600AS/450AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LJ Standard Trip Unit, Long Time, Instantaneous 1 - 45AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Thermal Magnetic Circuit Breaker: Type HJ Estimated Ship Days (ARO): 60 Working Days

017-00 1 Designation: CDP-3A1

NQ MB PNLB (INT,BOX,FRT) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Single Main: 100A/3P QOB Circuit Breaker Incoming Conductors: 1 - #4 - 2/0 AWG Bus: Copper: Silver/Tin Plated CU Ground Bar 30 Circuit Interior Type 1,Box: 32H x 20W x 5.75D Incoming: Top Trim: Surface - Hinged Box Cat No: MH32 Front Cat No: NC32SHR Ref. Drawing: PBA703HR Feeders: 18 - 20A/1P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Special Equipment Nameplate: Engraved as Follows Line 1: CDP-3A1 Size: 3.50" Wide x 1.00" High (Std) Special Color: GREY SURF / WHITE LETTERS Plastic/Adhesive - Screw-on Estimated Ship Days (ARO): 15 Working Days

021-00 1 Designation: XFMR-MDP-3A1-L

EE75T1814HF Transformer Type: Energy Efficient Transformer Rating: 75kVA Transformer Phase: Three Phase Primary Voltage: 480V Delta Secondary Voltage: 480Y/277V Transformer Taps: 6 - 2.5% 2+4- Taps Frequency: 60Hz Transformer Winding Material: Aluminum Electrostatic Shield:Non-Shielded Sound Level: Standard Insulation & Temperature: Class 220 (H), 115 Deg C Enclosure Material: Standard Enclosure Type: NEMA 2 Ventilated Indoor Enclosure UL Labeled

PAGE 18 OF 35



Item No.

Qty.


BILL OF MATERIAL

Revision: 082912 - (10292014/01292014) Estimated Ship Days (ARO): 30 Working Days


DASKP400 LUG KIT


DASKGS250 MECHANICAL LUG KITS

024-00 1 Designation: XFMR-MDP-3A2

EE112T3HF Transformer Dry Type 112.5kVA 480D208Y


DASKP400 LUG KIT



027-00 1 Designation: XFMR-CDP-3A1

EE30T3H Transformer Dry Type 30kVA 480D208Y120


DASKP100 LUG KIT



028-00 1 Designation: MSB-3A

QED-6 WC INTEGRATION QED-6 WC INTEGRATION

032-00 1 Designation: MS-3LB

Square D Custom Swbd Series 2 QED Switchboard --------------------------------- Square D Custom Swbd Series 2 Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480Y/277V 3Ph 4W 60Hz Source Description - Six Circuit Mains System Ampacity - 3000A Bussing - Silver Plated Copper Neutral Bus - 100% Max Available Fault Current (RMS) - 100kA Enclosure - Type 3R Non-Walk-in Accessibility: Front Only

PAGE 19 OF 35



Item No.

Qty.


BILL OF MATERIAL

Equipment Nameplate Black Surface/White Letters, Adhesive (Field Installed) Rodent Barrier Exterior Paint Color - ANSI 49 Copper Ground Bus Interior Lights - Main Section only Ground Lug provided for each device Strip Heaters - Wired with Thermostat Neutral Terminated in Incoming Section Barriers between Sections Lineup 1 BTU: 24639 Communications Network Options - Network Communications Only Communications Network Options- Modbus RS485 Comms Wired Out Certified Test Report Required Specials: 120V OUTLET FOR LBB V SENSING Specials: DCS ENGINEERING Specials: SHUNT TRIP WIRED TO TERM BLOCK Special 120V OUTLET FOR LBB V SENSING #: 4031241 Special DCS ENGINEERING #: NOTE Special SHUNT TRIP WIRED TO TERM BLOCK #: TAGWEB Dimensions --------------------------------- 6 - 36" Wide Section(s) 6 - 59.5" Deep Enclosure(s) 1 - Dimensions: 216.00" W X 59.5" D X 91.5"H Approximate Weight: 7511.00 lbs / 3406.99 kgs Incoming Requirements --------------------------------- Suitable for Use as Service Entrance When Not More Than 6 Main Disconnecting Means are Provided Entry Point: Left of Lineup, Through the Bottom Connection Type: Cable in Bussed Auxiliary Incoming Lug Type: Copper Compression Lug/Copper Cable Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS GROUND 400KCMIL YA322N Specials: TEMP GEN CAMLOCK CONNECTION Specials: START/STOP SWITCH W/TERM BLOCK Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS GROUND 400KCMIL YA322N #: NOTE Special TEMP GEN CAMLOCK CONNECTION #: 4031241 Special START/STOP SWITCH W/TERM BLOCK #: 4031241 Mains --------------------------------- 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type NW Main One 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type

PAGE 20 OF 35



Item No.

Qty.


BILL OF MATERIAL

NW Main Two 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type NW Main Three 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type NW Main Four 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type NW Main Five Common Main Features: Ammeter Trip Unit, Long Time, Short Time, Instantaneous, Ground Fault Circuit Breaker Modbus Communications Wired Overcurrent Trip Switch 1A/1B Form C Contact (SDE) Auxiliary Switches 4A-4B Shunt Trip without Communications - 24Vdc Kirk Key Interlock Cover over Open/Close Buttons Contact Wear Indication - Visual Load Lug Type: Copper Compression Lug/Copper Cable Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS GROUND 400KCMIL YA322N Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS GROUND 400KCMIL YA322N #: NOTE Ship Id: 01 Estimated On-site Dt: 04/30/2015

033-00 1 Designation: MS-3B

Square D Custom Swbd QED Switchboard --------------------------------- Square D Custom Swbd Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480Y/277V 3Ph 4W 60Hz Source Description - Single Main System Ampacity - 3000A Bussing - Silver Plated Copper Neutral Bus - 100% Max Available Fault Current (RMS) - 100kA Enclosure - Type 3R Non-Walk-in Accessibility: Front Only Equipment Nameplate Black Surface/White Letters, Adhesive (Field Installed) Rodent Barrier Exterior Paint Color - ANSI 49 Copper Ground Bus Interior Lights - Main Section only Ground Lug provided for each device Barriers between Sections Strip Heaters - Wired with Thermostat Lineup 1 BTU: 8888 Communications Network Options - Network Communications Only Communications Network Options- Modbus

PAGE 21 OF 35



Item No.

Qty.


BILL OF MATERIAL

RS485 Comms Wired Out Specials: 120V OUTLET FOR LBB V SENSING Specials: DCS ENGINEERING Special 120V OUTLET FOR LBB V SENSING #: 4031241 Special DCS ENGINEERING #: NOTE Dimensions --------------------------------- 2 - 36" Wide Section(s) 1 - Dimensions: 72.00" W X 47.5" D X 91.5"H 2 - 47.5" Deep Enclosure(s) Approximate Weight: 2065.00 lbs / 936.68 kgs Incoming Requirements --------------------------------- UL Dead Front Entry Point: Left of Lineup, Through the Bottom Connection Type: Cable in Bussed Auxiliary Incoming Lug Type: Copper Compression Lug/Copper Cable Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS GROUND 400KCMIL YA322N Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS GROUND 400KCMIL YA322N #: NOTE Mains --------------------------------- 1 - 3000AF/3000AT 100% 3 Pole Stored Energy, Fixed Mounted Circuit Breaker, UL: Type NW Ammeter Trip Unit, Long Time, Short Time, Instantaneous, Ground Fault Zone Interlocking, Ground Fault Circuit Breaker Modbus Communications Wired Overcurrent Trip Switch 1A/1B Form C Contact (SDE) Auxiliary Switches 4A-4B Cover over Open/Close Buttons Contact Wear Indication - Visual Load Lug Type: Copper Compression Lug/Copper Cable Specials: 8 SETS 3 500KCMIL PHASE YA342N Specials: 8 SETS GROUND 400KCMIL YA322N Special 8 SETS 3 500KCMIL PHASE YA342N #: 4031241 Special 8 SETS GROUND 400KCMIL YA322N #: NOTE Ship Id: 01 Estimated On-site Dt: 04/30/2015

034-00 1 Designation: MSB-3B

QED-6 SWITCHBOARD LOW VOLTAGE SWITCHGEAR **** Consult Factory for Delivery **** All Section Bussing Sized to the System Bus Ampacity Single Main With Feeders

PAGE 22 OF 35



Item No.

Qty.


BILL OF MATERIAL

480/277V,3PH-4W,60HZ 4000A Copper Main Bus Solidly Grounded Neutral 5KVA Control Power Transformer 100kA Maximum Available Fault Current Indoor NEMA 1 Style Enclosure ANSI 49 Exterior Color Paint Network Communications Only - No Web Pages RS485 Modbus Comms Wired Out Hand Held Breaker Test Kit 3 Wire Equipment, Neutral Grounded at Source 24VDC to Trip Unit Display ZSI Wiring on All Breakers White Back Pans Certified Test Reports Special Records: TAG SW-5 - 6 - 3000A CROSSBUS ENCLOSURE OPTIONS 6 - Section(s) with 4000A, Thermal Silver Flashed Vertical Bus 2 - 36", 4000A, 3W, Indoor Vertical Section 6 - 72" Deep Enclosure 6 - Bus Bracing - 100kA 6 - Rear Barriers Between Bus/Cable Compartment 5 - Bus Compartment Side Barriers 6 - Locking Hinged Rear Doors 6 - Plastic Mimic Bus - Black 5 - Cable Compartment Side Barriers 1 - 22", 4000A, 3W, Indoor Vertical Section 5 - Cable Supports 3 - 30", 4000A, 3W, Indoor Vertical Section INCOMING ONE: CONNECTIONS & METERING OPTIONS Freestanding Cable Fed - Bottom Incoming Non-Service Entrance 4000A 3W NEMA 2 Compression 2-Hole 500MCM Lugs MAIN ONE: CIRCUIT BREAKER 4000A, NW40H, Electrically Operated Main Breaker DESCRIPTION: GENERATOR 3B Ammeter Unit (5.0A), LSI Modbus Communications - Main/Tie Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 3000 86 Relay (Lockout) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Shunt Close - Electrically Operated Main Electric Reset (RES) Breaker ID Nameplate - Main Closing Coil (XF) Status Indicating Lights - Open/Close Breaker Padlock Attachment on Circuit Breaker Shunt Trip - Electrically Operated Main Undervoltage Trip: Adjustable Time Delay (MN) Spring Charging Motor (MCH) 12A Form C Contacts Auxiliary Switch Metering CTs

PAGE 23 OF 35



Item No.

Qty.


BILL OF MATERIAL

Cell - 1 BC Special Records: TAG NOTE - 1 - PUT AS SECTION 2 OF LINEUP TAG 3672712 - 1 - CUSTOM LUG PADS TAG 7600 - 2 - 8 SETS 3 500KCMIL PHASE YA342N TAG 0 - 2 - 8 SETS GROUND 400KCMIL YA322N FEEDER CIRCUIT BREAKERS & INSTRUMENTATION Shunt Trip - Electrically Operated Feeder 3000A, NW30H, Electrically Operated Feeder Breaker DESCRIPTION: UTILITY 3B Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 3000 86 Relay (Lockout) Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Undervoltage Trip: Adjustable Time Delay (MN) Shunt Close - Electrically Operated Feeder 1 Kirk Key Interlock on Feeder Breaker ZSI Restraint to Main Closing Coil (XF) Electric Reset (RES) 12A Form C Contacts Auxiliary Switch 3000A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 2 BC Special Records: TAG 3672712 - 1 - 8 SETS 3 500KCMIL PHASE YA342N TAG NOTE - 1 - 8 SETS GROUND 400KCMIL YA322N TAG NOTE - 1 - PUT AS SECTION 1 OF LINEUP Shunt Trip - Electrically Operated Feeder 4000A, NW40H, Electrically Operated Feeder Breaker DESCRIPTION: GENERATOR 3S Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 3000 86 Relay (Lockout) Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Undervoltage Trip: Adjustable Time Delay (MN) Shunt Close - Electrically Operated Feeder ZSI Restraint to Main

PAGE 24 OF 35



Item No.

Qty.


BILL OF MATERIAL

Closing Coil (XF) Electric Reset (RES) 12A Form C Contacts Auxiliary Switch 3000A, 3W, Copper, Qwik Flange Busway, ABC F-R Status Indicating Lights - Open/Close Metering CTs Cell - 3 BC Special Records: TAG 3672712 - 1 - 8 SETS 3 500KCMIL PHASE YA342N TAG NOTE - 1 - 8 SETS GROUND 400KCMIL YA322N 2000A, NW20H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 2000 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 2000A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 A Special Records: TAG 3672712 - 1 - 6 SETS 3 400KCMIL PHASE YA322N TAG 3672712 - 1 - 6 SETS GROUND 250KCMIL YA292N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 B Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder

PAGE 25 OF 35



Item No.

Qty.


BILL OF MATERIAL

Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 C Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 4 D Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 2000A, NW20H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 2000 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 2000A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close

PAGE 26 OF 35



Item No.

Qty.


BILL OF MATERIAL

Cell - 5 A Special Records: TAG 3672712 - 1 - 6 SETS 3 400KCMIL PHASE YA322N TAG 3672712 - 1 - 6 SETS GROUND 250KCMIL YA292N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 B Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 C Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 1200 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly

PAGE 27 OF 35



Item No.

Qty.


BILL OF MATERIAL

Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 5 D Special Records: TAG 3672712 - 1 - 4 SETS 3 350KCMIL PHASE YA312N TAG NOTE - 1 - 4 SETS GROUND 3/0 YA272N Shunt Trip - Electrically Operated Feeder 1600A, NW16H, Electrically Operated Feeder Breaker DESCRIPTION: MDP-3B Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 6 A Special Records: TAG 3672712 - 2 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 2 - 3 SETS GROUND 1/0 YA252N TAG 3672712 - 1 - CUSTOM LUG PADS Shunt Trip - Electrically Operated Feeder 1600A, NW16H, Electrically Operated Feeder Breaker DESCRIPTION: MDP-3A Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs

PAGE 28 OF 35



Item No.

Qty.


BILL OF MATERIAL

Status Indicating Lights - Open/Close Metering CTs Cell - 6 B Special Records: TAG 3672712 - 1 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 1 - 3 SETS GROUND 1/0 YA252N Shunt Trip - Electrically Operated Feeder 1600A, NW16H, Electrically Operated Feeder Breaker DESCRIPTION: CH-6-1 Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 Spring Charging Motor (MCH) 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker Shunt Close - Electrically Operated Feeder ZSI Restraint to Main Closing Coil (XF) 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Metering CTs Cell - 6 C Special Records: TAG 3672712 - 2 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 2 - 3 SETS GROUND 1/0 YA252N TAG 3672712 - 1 - CUSTOM LUG PADS 1600A, NW16H, Manually Operated Feeder Breaker DESCRIPTION: CH-6-3 Ammeter Unit (5.0A), LSI Modbus Communications - Feeder Sensor Rating Plug - A Plug Dial Setting - 1.0 Trip Setting (Amps) - 800 3C Connected, 3C Test, 3C Disconnected Cell Switch Assembly Breaker ID Nameplate - Feeder Breaker Padlock Attachment on Circuit Breaker ZSI Restraint to Main 12A Form C Contacts Auxiliary Switch 1600A, 3W, NEMA 2 Compression 2-Hole 500MCM Lugs Status Indicating Lights - Open/Close Cell - 6 D Special Records: TAG 3672712 - 1 - 3 SETS 3 300KCMIL PHASE YA302N TAG NOTE - 1 - 3 SETS GROUND 1/0 YA252N Ship Id: 01 Estimated On-site Dt: 04/30/2015

PAGE 29 OF 35



Item No.

Qty.


BILL OF MATERIAL

035-00 1 Designation: MSB-3B CONTROL SECT

QED-6 SWITCHBOARD LOW VOLTAGE SWITCHGEAR **** Consult Factory for Delivery **** Feeder Section(s) - (Main is Remote) 480/277V,3PH-4W,60HZ 3000A Copper Main Bus Solidly Grounded Neutral 100kA Maximum Available Fault Current Indoor NEMA 1 Style Enclosure ANSI 49 Exterior Color Paint 3 Wire Equipment, Neutral Grounded at Source White Back Pans ENCLOSURE OPTIONS 1 - Section(s) with 3000A, Thermal Silver Flashed Vertical Bus 1 - 36", 3000A, 3W, Indoor Vertical Section 1 - 72" Deep Enclosure 1 - Bus Bracing - 100kA 1 - Rear Barriers Between Bus/Cable Compartment 1 - Bus Compartment Side Barriers 1 - Cable Compartment Side Barriers INCOMING ONE: CONNECTIONS & METERING OPTIONS Freestanding Connection to Existing PZ4/QED6 Non-Service Entrance Connection to Existing: PZ4 / QED6 FEEDER CIRCUIT BREAKERS & INSTRUMENTATION Customer Instrumentation Compartment, 2-Cells Cell - 1 AB Customer Instrumentation Compartment, 2-Cells Cell - 1 CD Ship Id: 01 Estimated On-site Dt: 04/30/2015

036-00 1 Designation: MDP-3B

ILINE ML PNLB (INT,BOX,TRIM) I-Line Panelboard Consisting of 480V 3Ph 3W 60Hz Wye Grounded SCCR: 65kA Fully Rated Main Lug Only: 800A Main Acc: Cu Compression Lugs Cu Cable Incoming Conductors: 3 - 250 - 500 kcmil Bus: Copper: Tin Plated CU Ground Bar 63" of Mounting Inches Type 1,Box: 73H x 32W x 8.25D Incoming: Bottom Trim: Surface with Door Box Cat No: HC3273B Ref. Drawing: PBA402 Type: HCM Feeders: 2 - 20A/3P HJ 4 - 25A/3P HJ 1 - 60A/3P HJ 2 - 90A/3P HJ

PAGE 30 OF 35



Item No.

Qty.


BILL OF MATERIAL

1 - 125A/3P HJ 1 - 30A/3P HJ 1 - 100A/3P HJ Optional Features: Ship Together,Copper Ground Bar,Standard Mains and Feeders Mechanically Restrained Standard Nameplate: Engraved as Follows Line 1: MDP-3B Size: 3.50" Wide x 1.00" High (Std) Color: Black Surface / White Letters Plastic/Adhesive - Screw-on Ship Id: 01 Estimated On-site Dt: 04/30/2015

037-00 1 Designation: MDP-3B1

NQ ML PNLB (INT,BOX,FRT) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Main Lug Only: 250A Main Acc: Sub-Feed Lugs Incoming Conductors: 1 - 1/0 - 600 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior Type 1,Box: 50H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH50 Front Cat No: NC50VSHR Ref. Drawing: PBA709HR Feeders: 3 - 100A/3P QOB 27 - 20A/1P QOB 4 - 20A/1P QOB Prepared Space 1 - 30A/2P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Group User Placement Standard Nameplate: Engraved as Follows Line 1: MDP-3B1 Size: 3.50" Wide x 1.00" High (Std) Color: Black Surface / White Letters Plastic/Adhesive - Screw-on Ship Id: 01 Estimated On-site Dt: 04/30/2015

038-00 1 Designation: MDP-3B2

NQ ML PNLB (INT,BOX,FRT) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Main Lug Only: 125A Incoming Conductors: 1 - #6 - 350 kcmil Bus: Copper: Silver/Tin Plated CU Ground Bar 42 Circuit Interior

PAGE 31 OF 35



Item No.

Qty.


BILL OF MATERIAL

Type 1,Box: 38H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH38 Front Cat No: NC38SHR Ref. Drawing: PBA701HR Feeders: 2 - 100A/3P QOB Prepared Space 28 - 20A/1P QOB 4 - 25A/2P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Group User Placement Standard Nameplate: Engraved as Follows Line 1: MDP-3B2 Size: 3.50" Wide x 1.00" High (Std) Color: Black Surface / White Letters Plastic/Adhesive - Screw-on Ship Id: 01 Estimated On-site Dt: 04/30/2015

039-00 1 Designation: CDP-3B

Square D Custom Swbd QED Switchboard --------------------------------- Square D Custom Swbd Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480V 3Ph 3W 60Hz Source Description - Main is Remote System Ampacity - 2000A Bussing - Silver Plated Copper Max Available Fault Current (RMS) - 65kA Enclosure - Type 1 Accessibility: Front and Rear Equipment Nameplate Black Surface/White Letters, Screw-on (Factory Installed) Exterior Paint Color - ANSI 49 Ground Lug provided for each device Copper Ground Bus Barriers between Sections Lineup 1 BTU: 13255 Communications Network Options - Network Communications Only Communications Network Options- Modbus RS485 Comms Wired Out Certified Test Report Required Specials: BASLER BE3-25 SYNCH CHECK Specials: CUSTOM RELAY DOOR Specials: KIRK KEY SKRU Specials: FEEDERS TO MAIN Specials: FRONT ACCESS Specials: DCS ENGINEERING Specials: 2000A LUG TAP Special BASLER BE3-25 SYNCH CHECK #: 4031241 Special CUSTOM RELAY DOOR #: 4031241 Special KIRK KEY SKRU #: 4031241 Special FEEDERS TO MAIN #: NOTE Special FRONT ACCESS #: NOTE Special DCS ENGINEERING #: NOTE Special 2000A LUG TAP #: 4031241 Dimensions

PAGE 32 OF 35



Item No.

Qty.


BILL OF MATERIAL

--------------------------------- 2 - 36" Wide Section(s) 1 - 48" Wide Section(s) 3 - 36" Deep Enclosure(s) Dimensions: 120.00" W X 36" Max D X 91.5" H Approximate Weight: 3089.00 lbs / 1401.17 kgs Incoming Requirements --------------------------------- UL Dead Front Entry Point: Left of Lineup, Through the Bottom Connection Type: Cable Incoming Lug Type: Copper Compression Lug/Copper Cable Feeders --------------------------------- Devices Associated with Remote Main: 2 - 2000AS/2000AT 480V 80% Rated 65 kA 3 Pole UL, Fixed Mounted Electronic Trip Circuit Breaker: Type RK Ammeter Trip Unit, Long Time, Instantaneous Circuit Breaker Modbus Communications Wired Kirk Key Interlock Load Lug Type: Copper Compression Lug/Copper Cable Specials: 6 SETS -3 400KCMIL LUGS YA322N Specials: 6 - 250KCMIL GROUND YA292N Special 6 SETS -3 400KCMIL LUGS YA322N #: 4031241 Special 6 - 250KCMIL GROUND YA292N #: NOTE 1 - 600AS/225AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LJ Standard Trip Unit, Long Time, Instantaneous 9 - 600AS/450AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LJ Standard Trip Unit, Long Time, Instantaneous 1 - 45AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Thermal Magnetic Circuit Breaker: Type HJ Ship Id: 01 Estimated On-site Dt: 04/30/2015

040-00 1 Designation: CDP-3B1

NQ MB PNLB (INT,BOX,FRT) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Single Main: 100A/3P QOB Circuit Breaker Incoming Conductors: 1 - #4 - 2/0 AWG Bus: Copper: Silver/Tin Plated CU Ground Bar

PAGE 33 OF 35



Item No.

Qty.


BILL OF MATERIAL

30 Circuit Interior Type 1,Box: 32H x 20W x 5.75D Incoming: Top Trim: Surface - Hinged Box Cat No: MH32 Front Cat No: NC32SHR Ref. Drawing: PBA703HR Feeders: 18 - 20A/1P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Standard Nameplate: Engraved as Follows Line 1: CDP-3B1 Size: 3.50" Wide x 1.00" High (Std) Color: Black Surface / White Letters Plastic/Adhesive - Screw-on Ship Id: 01 Estimated On-site Dt: 04/30/2015

041-00 1 Designation: XFMR-MDP-3B1

EE75T3HF Transformer Dry Type 75kVA 480D208Y120


DASKP400 LUG KIT



042-00 1 Designation: XFMR-CDP-3B1

EE30T3H Transformer Dry Type 30kVA 480D208Y120


DASKP100 LUG KIT



047-00 1 Designation: MSB-3B

QED-5 WC INTEGRATION QED-6 WC INTEGRATION Ship Id: 01 Estimated On-site Dt: 05/01/2015

048-00 1 Designation: CDP-3C

Square D Custom Swbd QED Switchboard --------------------------------- Square D Custom Swbd Designed and Tested in accordance with: UL 891/NATIONAL ELECTRIC CODE/NEMA PB-2 System Voltage - 480V 3Ph 3W 60Hz

PAGE 34 OF 35



Item No.

Qty.


BILL OF MATERIAL

Source Description - Main is Remote System Ampacity - 2000A Bussing - Silver Plated Copper Max Available Fault Current (RMS) - 65kA Enclosure - Type 1 Accessibility: Front and Rear Equipment Nameplate Orange Surface / White Letters, Screw-on (Factory Installed) Exterior Paint Color - ANSI 49 Ground Lug provided for each device Copper Ground Bus Barriers between Sections Lineup 1 BTU: 16530 Communications Network Options - Network Communications Only Communications Network Options- Modbus RS485 Comms Wired Out Certified Test Report Required Specials: BASLER BE3-25 SYNCH CHECK Specials: CUSTOM RELAY DOOR Specials: KIRK KEY SKRU Specials: FEEDERS TO MAIN Specials: FRONT ACCESS Specials: DCS ENGINEERING Special BASLER BE3-25 SYNCH CHECK #: 4031241 Special CUSTOM RELAY DOOR #: 4031241 Special KIRK KEY SKRU #: 4031241 Special FEEDERS TO MAIN #: NOTE Special FRONT ACCESS #: NOTE Special DCS ENGINEERING #: NOTE Dimensions --------------------------------- 3 - 36" Wide Section(s) 1 - 48" Wide Section(s) 4 - 36" Deep Enclosure(s) Dimensions: 156.00" W X 36" Max D X 91.5" H Approximate Weight: 3936.00 lbs / 1785.37 kgs Incoming Requirements --------------------------------- UL Dead Front Entry Point: Left of Lineup, Through the Bottom Connection Type: Cable Incoming Lug Type: Copper Compression Lug/Copper Cable Feeders --------------------------------- Devices Associated with Remote Main: 3 - 2000AS/2000AT 480V 80% Rated 65 kA 3 Pole UL, Fixed Mounted Electronic Trip Circuit Breaker: Type RK Ammeter Trip Unit, Long Time, Instantaneous Circuit Breaker Modbus Communications Wired Kirk Key Interlock Load Lug Type: Copper Compression Lug/Copper Cable

PAGE 35 OF 35



Item No.

Qty.


BILL OF MATERIAL

Specials: 6 SETS -3 400KCMIL LUGS YA322N Specials: 6 - 250KCMIL GROUND YA292N Special 6 SETS -3 400KCMIL LUGS YA322N #: 4031241 Special 6 - 250KCMIL GROUND YA292N #: NOTE 1 - 600AS/225AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LJ Standard Trip Unit, Long Time, Instantaneous 9 - 600AS/450AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Electronic Trip Circuit Breaker: Type LJ Standard Trip Unit, Long Time, Instantaneous 1 - 45AT 480V 80% Rated 65 kA 3 Pole UL, Group Mounted Thermal Magnetic Circuit Breaker: Type HJ Ship Id: 01 Estimated On-site Dt: 04/30/2015

049-00 1 PLC START-UP

PLC START-UP

054-00 1 Designation: LP2

NQ ML PNLB (INT,BOX,FRT) NQ Panelboard Consisting of 208Y/120V 3Ph 4W 60Hz SCCR: 10kA Fully Rated Main Lug Only: 100A Incoming Conductors: 1 - #6 - 2/0 AWG Bus: Copper: Silver/Tin Plated CU Ground Bar 30 Circuit Interior Type 1,Box: 32H x 20W x 5.75D Incoming: Bottom Trim: Surface - Hinged Box Cat No: MH32 Front Cat No: NC32SHR Ref. Drawing: PBA701HR Feeders: 30 - 20A/1P QOB Optional Features: Ship Completely Assembled,Copper Solid Neutral,Copper Ground Bar Group User Placement Special Equipment Nameplate: Engraved as Follows Line 1: LP2 Size: 3.50" Wide x 1.00" High (Std) Special Color: GREY SURF / WHITE LETTERS Plastic/Adhesive - Screw-on Estimated Ship Days (ARO): 15 Working Days

055-00 1 BALTIMORE FS STARTUP SERVICES

BALTIMORE BASIC STARTUP SERVICES

COOPER PADMOUNT TRANSFORMERS

• Bill of Material • Drawings

Cooper Power Systems Proposal Number: BED1533013 Date: January 21, 2015 Revision 00 Proposal Valid Through: March 22, 2015

2201 Creststone Ct. Fort Collins, CO Phone: 307-258-5823 Fax: 888-902-9020 E-Mail: [email protected]

Page 2 of 10

Proposal Details Terms of Sale: FOB Plant - Freight Prepaid and Allowed Payment Terms: Net 25th Prox, cut off date 24th Proposal Valid Through: March 22, 2015 Orders are accepted subject to Eaton’s Cooper Power Systems Terms and Conditions of Sale that are included or have been provided previously to the buyer. Proposal number and item number should be referenced on purchase order. Quoted lead-times are based on current factory loading and are subject to change. Lead-time: Shipment is based on receipt of all required order information at Cooper Power Systems. X and Y (where applicable) are defined in the Item Details for each line item on this proposal. *IF NO APPROVAL DRAWINGS ARE REQUIRED, lead-time is (X) weeks from receipt of complete order information. *IF APPROVAL DRAWINGS ARE REQUIRED, drawings will be sent (Y) weeks from receipt of complete order information. Scheduling into production will occur upon the receipt of approved drawings at Cooper Power Systems with a release to manufacture. The equipment will be scheduled at the lead-time in effect at the time of release to manufacture. (CAUTION: This timeline does NOT include time for customer review and approval of drawings.) All 3 phase padmount transformers will be designed and manufactured in accordance with the latest revision of IEEE Standards C57.12.34 and C57.12.28. Unless shown in the bill of materials, all fuses, arresters, lugs, terminals, terminators, flex connectors, and related hardware shall be furnished and installed by others at no cost to Cooper. The bill of material detailed in the proposal shall be the specification of record. Any changes will require price consideration. Pricing does not include the delays or costs associated with witness of testing or final inspections. If required price consideration and ship date change may be considered. Spec Section: EXCEPTIONS AND CLARIFICATIONS * This proposal document applies to Section 26 12 00 Parts 1 and 2 only. CLARIFICATION: Section 2.02.A - Per phone correspondence with distributor, mineral oil is provided in lieu of the less flammable fluid (FR3) specified. CLARIFICATION: Section 2.02.B.2 - Provided impedance is 5.73% +/- 7.5% per ANSI standards CLARIFICATION: Section 2.02.B.4 - 3- position taps not available. Standard 5-position taps provided with 2, 2.5% above nominal, and 2, 2.5% below nominal. CLARIFICATION: Section 2.02.C.3 - Seismic Anchoring provisions provided on transformer tank, and transformer cabinet can be anchored via the sill. If external anchoring provisions are not necessary, and deduct would apply.



Page 3 of 10

CLARIFICATION: Section 2.02.H - A drillable plate is provided for customer supplied CT's or PT's. Alternatively, JAB-O style CT's are available upon request.



Page 4 of 10

Item Details

Item Number: 00002

Customer RFQ Information: Other: No specification provided; Dated: 12/17/2014

Outline Drawing Title: DMT1RYNM

Lead-time (Per Lead-time definition in Proposal Details): Product Lead-time (X): 13-14 weeks ex-factory Optional Approval Drawing Lead-time (Y): 2-4 weeks plus time for customer review.

Description:

kVA 2500 kVA 3 Phase Pad-Mounted Transformer Temperature Rise 65 degree average winding rise Cooling Class ONAN Frequency 60 Hz. Insulating fluid Mineral Oil Elevation Designed for operation at 1000 m (3300 ft) above sea level Sound Level NEMA TR1 Standard Efficiency Standard DOE 2010, 10 CFR Part 431 High Voltage 34500 Delta Volts, 150 kV BIL kV Class 35 kV Primary Configuration Dead Front, Loop Feed Taps 2 - 2.5% taps above and 2 - 2.5% taps below nominal Tap Changer 100 Amp 5-position tap changer High Voltage Bushings 200 amp, 35 kV Cooper load-break one-piece bushings (Qty: 6) Load-break Switching 15-38 kV, 300A 2 Position Arresters None Overcurrent Protection None Low Voltage 480Y/277 Volts, 30 kV BIL Secondary kV Class 1.2 kV Secondary Bushings Integral aluminum 12-hole spade bushing(s) (Qty: 4) Bushing Supports Standard LV Bushing Support Assembly Cabinet 36in deep cabinet Cabinet hardware Penta-head cabinet door bolts

IEEE K-Dimension Loop feed per IEEE C57.12.34-2009 Figure 14C specific dimensions (without bails)

Coatings Munsell Green (Munsell 7GY 3.29/1.5) topcoat Gauges & Fittings Liquid level gauge Gauges & Fittings Thermometer, dial-type Gauges & Fittings Pressure/vacuum gauge Gauges & Fittings Drain valve with sampler in LV Compartment (1") Gauges & Fittings Fill valve (1") Gauges & Fittings Schrader valve Gauges & Fittings Pressure relief device, 50 SCFM Tank accessories IEEE standard two-hole ground pads (Qty: 3) Tank accessories Nitrogen Blanket

Tank accessories PT Mounting Provisions (drillable plate mounted below low-voltage bushings)

Tank accessories Seismic anchoring provisions welded to tank Packaging None (Pallet Not Included) Cover Bolted cover with handhole



Page 5 of 10

Item Number: 00002

PERFORMANCE DATA: Design Impedance No Load Losses @20 C Load Losses @85 C Efficiency @ 50% Load Efficiency @ 100% Load Regulation @ 0.8 Power Factor Fluid Weight Total Weight Fluid Volume Primary Conductor Material Secondary Conductor Material Estimated Overall Height Estimated Overall Width Estimated Overall Depth

**Losses are For Reference Only** 5.76% (For Reference Only) 2341 Watts 17338 Watts 99.49 % 99.22 % 3.94 % 4531 lbs 15936 lbs 608 Gallons AL AL 74.66 inches 94.86 inches 86.36 inches



Page 6 of 10

Proposal Notes

Technical Unless specifically listed in the quoted transformer bill of material, the following items are not included in this proposal: elbows, elbow grounding kits, connectors, stand-offs, insulated bushing type parking stands (standoff bushings), insulated protective caps (bushing covers), insulated protective bushing well plugs, secondary terminating lugs, grounding lugs, anchor bolts, padlocks, key interlocks, hot sticks, pentahead wrenches. Please contact your Cooper Power Systems sales representative for information on how to procure this equipment. In addition to transformers, Eaton’s Cooper Power Systems also offers a wide range of vault and pad-mounted underground distribution switchgear for your sectionalizing, overcurrent protection and automation needs. Various product types are available to provide either fused or electronic resettable overcurrent protection, with under oil or vacuum switching. Switchgear is also available for applications such as reclosing, source transfer, grid intertie, and automatic feeder reconfiguration. Please contact your sales representative for additional information. Product/Design Testing WITNESS / INSPECTON VISIT: Customer Witness of Routine Test/Final Inspect: $2000 per unit, +1 week Customer Final Inspection: $1500 per unit, +1 week Cooper performs the routine tests as defined in the current IEEE standard C57.12.90, which include: • Insulation Power Factor: This test verifies that vacuum processing has thoroughly dried the insulation system to required limits. Please note CPS does not utilize Doble testing equipment. • Ratio, Polarity, and Phase Relation: Assures correct winding ratios, phase shift, and tap voltages. Tested at a maximum of 100V. • Resistance: Verifies the integrity of internal HV and LV connections; provides data for loss upgrade calculations. • Routine Impulse Tests: The most severe test, simulating a lightning surge. Applies one reduced wave and one full wave to verify the BIL rating. • Applied Potential: Applied to both high-voltage and low-voltage windings, this test stresses the entire insulation system to verify all live-to-ground clearances. • Induced Potential: 3.46 times normal plus 1000 volts for reduced neutral designs, twice normal voltage for full-neutral designs.• Loss Test: These design verification tests are conducted to assure that guaranteed loss values are met and that test values are within design tolerances. Tests include no-load loss and excitation current along with impedance voltage and load loss. • Leak Test: Pressurizing the tank to 7 psig assures a complete seal, with no weld or gasket leaks, to eliminate the possibility of moisture infiltration or oil oxidation. This proposal is based upon standard factory testing. These tests are the routine tests as defined by IEEE C57.12.00. Certified test reports can be provided at no additional charge, if requested. The following special tests, witness of tests, or inspections must be individually itemized and shown on the Purchase Order. Any additions of these items after the initial P.O. date will be 2X the cost of the test or inspection: WITNESS / INSPECTION VISIT: Customer Witness of Routine Test/Final Inspect: $2000 per unit, +1 week Customer Final Inspection: $1500 per unit, +1 week



Page 7 of 10

Core and Coil Inspection: $1000 per unit, +1 week Photographic Record of Core/Coil/Tanking: $750 per unit Please note that only one unit of each catalog design may be witness tested, including identical designs of double-ended substations. TEST Prices are per unit Heat Run: $3000/unit, +1 week Chopped Wave Impulse Test (HV only): $2500/unit Full & Reduced Wave Impulse Test (LV only): $2500/unit Record of Impulse Oscillogram Waveforms: $500/unit Sound Test: $2500/unit, +1 week RIV (Corona) Test: $2500/unit, +2 weeks Zero Sequence Impedance Test: $1000/unit Extended Leak Test: $500/unit Dissolved Gas Analysis: $600/unit PCB Fluid Testing: $500/unit Fluid Dielectric Testing: $500/unit Detection of Sulfur Dioxide: $500/unit Commercial In the event Buyer cancels this agreement after award, the following will be charged as a percentage of the order price of each item cancelled: After award, before engineering has begun: 20%. After engineering has begun, before production firm schedule date: 50%. After production firm schedule date, before fabrication: 70%. After fabrication has begun: 100% This Proposal is based on our interpretation of any Specifications, Drawings, and/or other information provided to Cooper. Accuracy/Completeness is the sole responsibility of the Distributor, Contractor, and End User. If any Item/Service is not listed it is not included nor implied to be. All Items/Services not shown/listed will be the responsibility of the Distributor, Contractor, and End User to furnish/provide. We now offer complete services for all your power distribution and automation needs. We have the industry’s largest Electrical Power Equipment Manufacturer’s Service Team, which provides 24 hour service. We provide start-up and commissioning; power system analysis including Arc Flash, Harmonics and other studies; preventive maintenance, testing and field trouble-shooting; multi-year service contracts; power system automation engineering, monitoring and training; aftermarket life extension solutions; as well as turnkey project capabilities. In addition to the services that we can provide for the equipment contained within this proposal, our Service Team is experienced on all manufacturers' electrical power distribution equipment, so please contact us about any electrical system problem. If you need immediate service, you can contact the Representative who provided this proposal, or call our 24-hour response number: 1-800-498-2678. A written Purchase Order must be received by the sales office that submitted this quote within 60 days of the date on the quote. The Purchase Order may be either Release for Manufacture or Hold for Approval Drawing Submittal. When the order is Hold for Approval Drawing Submittal, the Approval Drawings must be returned to the submitting sales office with a Release for Manufacture within 60 days of the original P.O. date. Should the Release for Manufacture arrive after the 60 days mentioned above, an escalation schedule be applied as follows:



Page 8 of 10

> 60 days = 2% total price escalation > 90 days = 3% total price escalation >120 days = 4% total price escalation >150 days = 5% total price escalation >180 days = Order cancelled with 20% cancellation fee AND Customer must enter new order against updated Proposal Upon order entry by Cooper Power Systems, the transformer will be acknowledged to ship at the quoted lead time or the best available lead time. For a fee of $1500 per design, Cooper Power Systems will provide approval drawings prior to placement of a purchase order for the quoted units. This fee can then be applied toward the future purchase of the quoted units. For more information, please contact your Cooper Sales Representative. Approval drawing lead-time is 3-4 weeks. Cooper’s standard limited warranty covers any defect which shall appear under proper and normal use of its equipment within one (1) year after date of shipment or within one (1) year after installation of the equipment, but not exceeding eighteen (18) months from date of shipment. Lead times quoted are based on accurate and complete information from the customer. If additional information or clarifications are required, a delayed response from the customer may affect the ship date(s) of the unit(s). The manufacturer cannot be held accountable for such delays.

DMT1RYNMREVISIONS

DESCRIPTIONITEBolted Cover w/ Handhole w/ Nutguard1Bushing Box2Cooling Corrugate3Drain Valve with Sampler4Ground Pad .50-13 Tap5Ground Strap and Pad6High Security Cabinet w/ Pentahead Door Bolts

7

35kV 200 Amp Loadbreak HV Bushing8LV Bushing Support9Lifting Lug10Liquid Temperature Gauge111.2kV LV Bushing w/12 Hole Spade Supported

12

Magnetic Oil Level Gauge13Nameplate14One Inch Upper Fill Valve15PT Mounting Plate16Parking Stand17Pressure Relief Valve18Pressure Vacuum Gauge19Schrader Valve20Seismic Anchor Provisions21Tank Base w/ Jacking and Rolling Facilities

22

Tap Changer23Two Position Loadbreak Switch24X0 Bushing25

Seismic Provision Detail

H1A

H2A

H1B

H2B

H3BH3A

X1

X2

X3

K=7.5

X0

ALL DIMENSIONS ARE IN INCHES

TITLE:

SUBJ:

DWG: DATE: REF: SHEET #:3DGGR 1/21/2015

SCALE:OF1 1

THIS DRAWING HAS BEEN GENERATED FROM A 3D MODEL.

DMT1RYNM

3-Phase AssemblyCOOPER POWER SERIES THREE-PHASE PAD-MOUNTED COMPARTMENTAL TYPE

REV:00

TOLERANCES UNLESS OTHERWISESPECIFIED +/- 0.25ANGULAR +/- 2 DEG

Eaton Corporation plc - Confidential and Proprietary This document, including the drawing and information contained thereon, is confidential and is the exclusive property of Eaton Corporation plc (“Eaton”) or its affiliates, and is merely on loan andsubject to recall by Eaton and/or its affiliates at any time. By taking possession of this document, the recipient acknowledges and agrees that this document cannot be used in any manner adverse to the interests of Eaton or its affiliates, and that no portion of this document may be copied or otherwise reproduced without the priorwritten consent of Eaton or its affiliates. In the case of conflicting contractual provisions, this notice shall govern the status of this document.

P3D V03R04M09

3PH Padmount Transformer 60Hz2500.0 kVA ONAN 65 AWR OilHV 34500D 150 BILLV 480Y/277 30 BIL5.76 %IZApproximate Weight 15081 lbs.Munsell Green TopcoatMild Steel Construction DESIGN #: 1

9

24

16

1511 18201319

21

17

Cabinet Removed

1.0

3.0

21

n0.88

23.4

26.4

8 12

23 25

33.0Pad

Opening85.0 Pad Opening

91.9

77.5 Tank

81.0 Seismic Provision

6.2

5.87.0Typ

9.06.8Typ

24.0

15.5

54.00 34.0088.00

27.0

8.0

8.0

46.0

8.0

71.0

36.0 32.0 16.0

86.4

75.4

3.0

72.00

310

22

17

2

5

6

1.5

2.0

4

14

Date post:	17-Aug-2015
Category:	Documents
Upload:	pamela-denton
View:	22 times
Download:	0 times

Proposal Example

Documents