Dimensions: 150 mm (L) x 81.5 mm (W) x 40.6 mm (H) (5.9” x 3.2” x 1.6” ) Connectors: Main Power ATX 12 V Peripherals: SATA, HDD, FDD Fan size: 40 mm x 40 mm Safety: EMI/EMC: Seasonic Japan [email protected]SWITCH MODE POWER SUPPLY FLEX ATX v1.0 SS-250/200SU ACTIVE PFC F0 Sea Sonic Electronics Co., Ltd. www.seasonic.com [email protected]Seasonic Electronics Inc. www.seasonicusa.com [email protected]Sea Sonic Europe B.V. [email protected]FEATURES: ELECTRICAL SPECIFICATIONS: BSMI CE FCC C-tick 9 Flex ATX v1.0 compliant 9 Forward converter circuit 9 High efficiency and reliability 9 Zero minimum load on 3.3 V rail 9 Super low noise fan control 9 Short circuit protection on all outputs 9 Over voltage protection 9 Over power protection 9 100 % HiPot test 9 100 % Burn-in, high temperature cycled on/off 9 PFC harmonics compliance: EN61000-3-2: 2006 + A1: 2007 + A2: 2009 Input frequency 50 / 60 Hz Efficiency (at normal input voltage) > 80 % (250SU only) Dielectric withstand, input to frame/ground 1800 VAC, 1sec Dielectric withstand, input to output 1800 VAC, 1sec Line regulation ± 1 % (typical) Load regulation ± 5 % (typical) Cross regulation ± 5 % (typical) MTBF, full load @ 25 °C ambient (excl. DC fan) > 100,000 hours Active Power Factor Correction 99 % (typical) Model DC Outputs Total power Input type +3.3 V +5 V +12 V Combined -12 V +5 Vsb SS-250SU APFC F0 (80 PLUS® Bronze) 14 A 17 A 18 A 0.8 A 2 A 250 W Full range 110 W (max.) 216 W SS-200SU APFC F0 (80 PLUS® ) 14 A 17 A 14 A 0.8 A 2 A 200 W Full range 110 W (max.) 168 W 150.00 40.60 81.50 SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE. CB cUL UL CCC SEMKO cTUVus TUV VDE PSE EAC
Transcript
Dimensions: 150 mm (L) x 81.5 mm (W) x 40.6 mm (H)(5.9” x 3.2” x 1.6” )
Connectors: Main Power ATX 12 V Peripherals: SATA, HDD, FDD
9 Flex ATX v1.0 compliant 9 Forward converter circuit 9 High efficiency and reliability 9 Zero minimum load on 3.3 V rail 9 Super low noise fan control 9 Short circuit protection on all outputs 9 Over voltage protection 9 Over power protection 9 100 % HiPot test 9 100 % Burn-in, high temperature cycled on/off 9 PFC harmonics compliance: EN61000-3-2: 2006 + A1: 2007 + A2: 2009
Input frequency 50 / 60 Hz
Efficiency (at normal input voltage) > 80 % (250SU only)
Dielectric withstand, input to frame/ground 1800 VAC, 1sec
Dielectric withstand, input to output 1800 VAC, 1sec
Line regulation ± 1 % (typical)
Load regulation ± 5 % (typical)
Cross regulation ± 5 % (typical)
MTBF, full load @ 25 °C ambient (excl. DC fan) > 100,000 hours
Active Power Factor Correction 99 % (typical)
ModelDC Outputs
Total power
Inputtype+3.3 V +5 V +12 V
Combined -12 V +5 Vsb
SS-250SU APFC F0(80 PLUS® Bronze)
14 A 17 A 18 A0.8 A 2 A 250 W Full range
110 W (max.) 216 W
SS-200SU APFC F0(80 PLUS® )
14 A 17 A 14 A0.8 A 2 A 200 W Full range
110 W (max.) 168 W
150.
0040
.60
81.50
SpecificationS may change without prior notice.
CB cUL UL CCC SEMKO
cTUVus TUV VDE PSE EAC
Dimensions: 81,5 mm (L) x 150 mm (W) x 40,5 mm (H)
Connectors: Main Power ATX 12 VPeripherals: SATA, HDD, FDD
9 SATA-ready 9 DC to DC converter design 9 High efficiency and reliability 9 Low ripple and noise 9 Super low noise fan control 9 Short circuit protection on all outputs 9 Over voltage protection 9 Over power protection 9 100 % HiPot test 9 100 % Burn-in, high temperature cycled on/off
Input frequency 50/60 Hz
Inrush current, cold start 100A max.
Efficiency (at normal input voltage) 87 %
Line regulation ± 1 % (typical)
Load regulation ± 5 % (typical)
Cross regulation ± 5 % (typical)
Ripple / Noise 1 %
MTBF, full load @ 25 °C ambient (excl. DC fan) >100,000 hrs
Active Power Factor Correction > 95 % (typical)
ModelDC Outputs Total
power Input type+3.3 V +5 V +12 V
Combined -12 V +5 Vsb
SSP-300SUG Active PFC F0
10 A 14 A 25 A 0.3 A 2 A 300 W Full range
70 W 1 300 W 3.6 W 10 W
SpecificationS may change without prior notice.
150,0040,50
81,5
0
*1 Combined +3.3 V DC and +5 V DC maximum power
Safety and eMi/eMc:
BSMI CE FCC C-tick
CB cUL UL CCC SEMKO
cTUVus TUV VDE PSE EAC
Dimensions: 190 mm (L) x 81.5 mm (W) x 40.5 mm (H)(7.5” x 3.2” x 1.6” )
Connectors: Main PowerATX 12 VPeripherals: SATA, HDD, FDD
9 Intel ATX 12 V v2.31 and EPS 12 V compliant 9 80 PLUS® Gold certification
(up to 90 % efficiency at 115 V AC and 50 % load) 9 Supports the latest Intel and AMD platforms 9 DC to DC converter design 9 High efficiency and reliability 9 Super low noise fan control 9 Short circuit protection on all outputs 9 Over voltage protection 9 Over power protection 9 100 % HiPot test 9 100 % Burn-in, high temperature cycled on/off
Input frequency 50 / 60 Hz
Efficiency (at normal input voltage) > 87 %
Line regulation ± 1 % (typical)
Load regulation ± 5 % (typical)
Cross regulation ± 5 % (typical)
MTBF, full load @ 25 °C ambient (excl. DC fan) >100,000 hours
