Volute casing pumps NL 32 - 125 300 - 500 · Volute casing pumps NL 32 - 125 ... 300 - 500 ... the...

Volute casing pumps

NL 32 - 125 ... 300 - 500

Tech_cat_NL_Eng.doc 22/12/03

TECHNICAL DATAFlow: max. 1800 m³/hHead: max. 140 mSpeed: max. 3600 rpmMaterial: cast iron (0B,0C,0E) and stainless steel (4B)Temperature: max. 170 ºC depending on the shaft sealing,

material execution and fluid. (Hot water up to120º C, maximum)

Casing Pressure: material design 4B PN 160B, 0C, 0E PN 16 / 101) / 142)

Shaft sealing: mechanical seal or stuffing boxFlange connections: material design 4B DIN 2501 PN 16

0B, 0C, 0E DIN 2501 PN 16 / 103)

Direction of rotation: clockwise when looking at the pumpfrom the drive end.

APPLICATIONVolute casing pumps of the NL range (meeting DIN 24255 / EN 733and ISO 9908) are used when clear or turbid liquids free from solidparticles are to be pumped. Application areas for pumps in this rangeinclude:Automobile, mechanical and general engineering industriesFood and beverage industryPharmaceutical industryPaint industryPlastic and rubber industryIron and non-ferrous metal industryPaper and pulp industryTextile industryBuilding and construction industryHeating and air conditioningDrainageWater supplyIrrigationA range of materials is available to meet the specific needs ofcustomers. For applications not covered by this pump range we offerthe ABS process pump range.

DESIGNHorizontal, single-stage volute casing pumps with connections andmain dimensions to DIN 24255 / EN 733, plus 19 additional sizes.The design of the pump allows the complete drive unit to bewithdrawn from the casing without disturbing the attached pipe work.If a spacer type coupling is used, it is also unnecessary to disconnectthe motor.

The range covers 50 sizes with only 5 different bearing brackets.

CONSTRUCTION

Casing pressure:

Material 4B: max 16 bar from - 40 °C to +120 °C max 14 bar from 120ºC up to +170 °C

Material 0B, 0C, 0E: max 16/101 )/142) bar from - 20 °C to +120 °C max 14/91)/82) bar from 120 ºC up to +170 °C

Max. casing pressure= inlet pressure + delivery head at zero flowPlease note: The relevant technical regulations and safety rules mustbe observed.

Flanges location:Axial suction flange, discharge flange radially upwards.

Flanges:

Material design 4B: Complies with DIN 2543 PN 16 Material design 0B, 0C, 0E: DIN 2533 PN 16 / 2532 PN 103)

Flanges drilled according to ANSI 150 can be supplied.

Bearings:

Bearing brackets 25, 35 and 45: Two ball bearings, lifetimegreased (2Z), design code B, or oil lubrication, design code C.Bearing brackets 55 and 65: One double row angular contactbearing on pump side, plus one ball bearing on drive side, greaselubricated S or oil lubricated T.Oil lubrication configurations with CLO (Constant Level Oiler) canbe supplied.

Shaft sealing:

Shaft sealing either by stuffing box or mechanical seal.Code 041: Self-sealed, uncooled packing ringsCode 052: Uncooled packing rings, external sealing liquidCode AF3: Balanced mechanical seal,

seal face materials SiC/Carbon, elastomer EPDMCode BJ3: Unbalanced bellows mechanical seal,

seal face materials SiC/Carbon, elastomer EPDMCode C23: Unbalanced bellows mechanical seal,

seal face materials SiC/Carbon, elastomer EPDMCode AFS: Balanced mechanical seal,

seal face materials SiC/ SiC, elastomer FPM (Viton)Code BJS: Unbalanced bellows mechanical seal,

seal face materials SiC/ SiC, elastomer FPM (Viton)Code C2S: Unbalanced bellows mechanical seal,

seal face materials SiC/ SiC, elastomer FPM (Viton)Code AFK: Balanced mechanical seal, seal face materials

SiC/carbon, elastomer FPM (Viton) double PTFE(Teflon) wrapped

Code BJJ: Unbalanced bellows mechanical seal, seal facematerials SiC/Carbon, elastomer FPM (Viton)

Code C2J: Unbalanced bellows mechanical seal, seal facematerials SiC/Carbon, elastomer FPM (Viton)

Codes AX3, AXS, AXK: are equivalent to AF3, AFS, AFK plusquench

Codes AY3, AYS, AYK: are equivalent to AF3, AFS, AFK plusheating

Codes A93, A9S, A9K: are equivalent to AF3, AFS, AFK plusexternal flushing

As an option, Code 051 (as 052, but with inlet and outlet) andother sealing execution can be supplied on request.

1) From 80-400 to 300-500 except 150-5002) 150-5003) 150-200, 150-250 and 200-250

Designs are subject to amendment without prior notice.

Material design:Item Component Material Construction

Mat. Nº DINdenomination

ISO ENdenomination

US Material 0B 0C 0E 4B

ASTMStandard

AISI

10.20 Volute casing EN-JL 10401.4408

GG-25GX6CrNiMo18 10

EN-GJL 250GX5CrNiMo19-11-2

A 278 Cl. 30A 351 CF8M 316

x x xx

16.10 Casing cover EN-JL 10401.4408

GG-25GX6CrNiMo18 10

EN-GJL 250GX5CrNiMo19-11-2

A 278 Cl. 30A 351 CF8M 316

x x xx

21.00 Shaft 1.05031.40211.4401

C 45X 20 Cr13X5CrNiMo17 12 2

C 45X 20 Cr13X5CrNiMo17 12 2

A 576 Gr1045A 276 Type 420A 167 Gr316

1045 420 316

x(*)x

x(*)x

x(*)x

x23.00 Impeller EN-JL 1040

2.10501.4408

GG-25G-CuSn10GX6CrNiMo18 10

EN-GJL 250

GX5CrNiMo19-11-2

A 278 Cl. 30B 427 C91600A 351 CF8M 316

xx

x x

33.00 Bearing bracket EN-JL 1040 GG-25 EN-GJL 250 A 278 Cl. 30 x x x x52.30 Shaft sleeve /

Mechanical seal1.4021 X 20 Cr13 X 20 Cr13 A 276 Type 420 420 X(*) X(*) X(*)

52.40 Shaft sleeve /Stuffing box

1.40211.4401

X 20 Cr13X5CrNiMo17 12 2

X 20 Cr13X5CrNiMo17 12 2

A 276 Type 420A 167 Gr316

420 316

x x xx

46.10 Shaft seal /Stuffing box

Soft packing x x x x

43.30 Mechanical seal Silicon Carbide / Carbon EPDM or Viton ( See other options ) x x x x(*) Only in bearing brackets 55 and 65.

Casing gasket:

The casing is sealed by means of a confined flat gasket of EWP 210 material. Code of this design: 2The casing is sealed by means of a confined flat gasket of PTFE. Code of this design: 4

Motor Power:Using commercial electric motors, type of construction IM B3.To determine the drive power we recommend the following safety margin:

Up to 4 kW: 25% 4 to 7,5 kW: 20% above 7,5 kW: 15%The following speeds must not be exceeded:

Sizemax. speed

rpm Sizemax. speed

rpm Sizemax. speed

rpm Sizemax. speed

rpm32125 3216032200 4012540160 4020050125 5016050200 65125

65160 652001)

801601) 80200100160 100200

3600

3225040250502506525080250

1002502)

1252002)

3000

403153) 503153)

653153) 803153)

80400 100315100400 125250125315 125400150200 1502504)

150315 150400200250

1800150500 200315200400 200500250300 250315250400 250500300400 300500

1500

1) In material design 4B max. speed 3000 rpm 2) In material design 4B max. speed 1800 rpm3) In material design 0E, and 4B max. speed 3000 rpm 4) In material design 4B max. speed 1500 rpm

The max. speeds are derived from the permissible shaft loads and the permissible peripheral speeds of the impellers

Bearing bracket / pump size:

Bracket 25 32125 32160 32200 32250 40125 40160 40200 40250 50125 50160 50200 50250 65125 65160 65200 80160

Bracket 35 40315 50315 65250 65315 80200 80250 80315 100160 100200 100250 100315 125200 125250 150200 150250

Bracket 45 80400 100400 125315 125400 150315 150400 200250

Bracket 55 150500 200315 200400 200500 250300 250315

Bracket 65 250400 250500 300400 300500

General comments:For horizontal volute pumps in CLOSE COUPLED construction with STANDARD motor for nominal performances and flange connections as perEN 733 refer to our series NL Close-coupled.


SECTIONAL DRAWING AND NOMENCLATURE

10.20 volute casing 23.00 impeller 43.30 mechanical seal16.10 casing cover 32.10 ball bearing 46.10 stuffing box18.30 support foot 33.00 bearing bracket 52.40 shaft sleeve (stuffing box)21.00 shaft

Mechanical seal BJ3

Stuffing Box 041

Bearingbrackets25, 35 and 45


SECTIONAL DRAWING AND NOMENCLATURE

10.20 volute casing 23.00 impeller 43.30 mechanical seal16.10 casing cover 32.10 ball bearing 46.10 stuffing box18.30 support foot 32.11 ball bearing 52.30 shaft sleeve (mechanical seal)21.00 shaft 33.00 bearing bracket 52.40 shaft sleeve (stuffing box)

Stuffing Box 041

Bearingbrackets55 and 65.

Mechanical seal BJ3


Performance Graph

150-200

250- 300

300-500

200- 315

250- 500

200-500150-500

300- 400

250- 400

200- 400

250- 315

100-250

80-25065-250

200- 250

150-250

150- 315

125- 315

150- 400

125- 400100-40080-400

100- 315

80- 315

65- 315

125- 250

125-200

100-160

100- 200

80- 200

32- 200B

32- 160B

40- 160

32-125 40-125 50-125 65-125

50-160 65-160

80-160

40- 200

65- 200

50- 200

50-250

US gal./min

Imp.gal./min10008006004002001008060402010

10008006004002001008060402010

2 3 4 5 10 20 405030

100 200 400300 500 2000

1000

2

3

4

5

10

20

30

40

50

60

80

100

n = 1450 rpm

100

80

60

40

30

20

10

1500 2000 3000 4000

1500 2000 3000

200

250

300

150

40- 25032-250

40-315 50-315

32-160A

32-200A

Q [m³/h]

H[ft]

H[m]

H[m]

H[ft]

Q [m3/h]

n = 2900 rpm


Performance Graph

n = 3500 rpm

Q [m³/h]

H[ft]

H [m]

n = 1750 rpm

Q [m³/h]

H[ft]

H[m]


Table of Dimensions

All dimensions in mmSize BB Pump dimensions Foot dimensions Shaft end

DN2 DN1 a f h1 h2 b c m1 m2 n1 n2 s1* s2* w x d1 l t u32125 25 32 50 80 360 112 140 50 15 100 70 190 140 M12 M12 260 100 24 50 27 832160 25 32 50 80 360 132 160 50 15 100 70 240 190 M12 M12 260 100 24 50 27 832200 25 32 50 80 360 160 180 50 15 100 70 240 190 M12 M12 260 100 24 50 27 8322501) 25 32 50 100 360 180 225 65 15 125 95 320 250 M12 M12 260 100 24 50 27 840125 25 40 65 80 360 112 140 50 15 100 70 210 160 M12 M12 260 100 24 50 27 840160 25 40 65 80 360 132 160 50 15 100 70 240 190 M12 M12 260 100 24 50 27 840200 25 40 65 100 360 160 180 50 15 100 70 265 212 M12 M12 260 100 24 50 27 840250 25 40 65 100 360 180 225 65 15 125 95 320 250 M12 M12 260 100 24 50 27 8403151) 35 40 65 125 470 225 250 65 18 125 95 345 280 M12 M12 340 100 32 80 35 1050125 25 50 65 100 360 132 160 50 15 100 70 240 190 M12 M12 260 100 24 50 27 850160 25 50 65 100 360 160 180 50 15 100 70 265 212 M12 M12 260 100 24 50 27 850200 25 50 65 100 360 160 200 50 15 100 70 265 212 M12 M12 260 100 24 50 27 850250 25 50 65 100 360 180 225 65 15 125 95 320 250 M12 M12 260 100 24 50 27 8503151) 35 50 65 125 470 225 280 65 17 125 95 345 280 M12 M12 340 100 32 80 35 1065125 25 65 80 100 360 160 180 65 15 125 95 280 212 M12 M12 260 100 24 50 27 865160 25 65 80 100 360 160 200 65 15 125 95 280 212 M12 M12 260 100 24 50 27 865200 25 65 80 100 360 180 225 65 15 125 95 320 250 M12 M12 260 140 24 50 27 865250 35 65 80 100 470 200 250 80 15 160 120 360 280 M16 M12 340 140 32 80 35 1065315 35 65 80 125 470 225 280 80 18 160 120 400 315 M16 M12 340 140 32 80 35 1080160 25 80 100 125 360 180 225 65 15 125 95 320 250 M12 M12 260 140 24 50 27 880200 35 80 100 125 470 180 250 65 15 125 95 345 280 M12 M12 340 140 32 80 35 1080250 35 80 100 125 470 200 280 80 18 160 120 400 315 M16 M12 340 140 32 80 35 1080315 35 80 100 125 470 250 315 80 18 160 120 400 315 M16 M12 340 140 32 80 35 10804001) 45 80 125 125 530 280 355 80 18 160 120 435 355 M16 M12 370 140 42 110 45 121001601) 35 100 125 125 470 200 280 80 18 160 120 360 280 M16 M12 340 140 32 80 35 10100200 35 100 125 125 470 200 280 80 18 160 120 360 280 M16 M12 340 140 32 80 35 10100250 35 100 125 140 470 225 280 80 18 160 120 400 315 M16 M12 340 140 32 80 35 10100315 35 100 125 140 470 250 315 80 18 160 120 400 315 M16 M12 340 140 32 80 35 10100400 45 100 125 140 530 280 355 100 18 200 150 500 400 M20 M12 370 140 42 110 45 121252001) 35 125 150 140 470 250 315 80 18 160 120 400 315 M16 M12 340 140 32 80 35 10125250 35 125 150 140 470 250 355 80 18 160 120 400 315 M16 M12 340 140 32 80 35 10125315 45 125 150 140 530 280 355 100 18 200 150 500 400 M20 M12 370 140 42 110 45 12125400 45 125 150 140 530 315 400 100 18 200 150 500 400 M20 M12 370 140 42 110 45 121502001) 35 150 200 160 470 280 400 100 20 200 150 550 450 M20 M12 340 140 32 80 35 101502501) 35 150 200 160 470 280 400 100 20 200 150 500 400 M20 M12 340 140 32 80 35 10150315 45 150 200 160 530 280 400 100 18 200 150 550 450 M20 M12 370 140 42 110 45 12150400 45 150 200 160 530 315 450 100 18 200 150 550 450 M20 M12 370 140 42 110 45 122002501) 45 200 200 160 590 280 400 100 22 200 150 500 400 M20 M12 430 180 42 110 45 12

1)Transnorm pump sizes, not included in DIN 24255 / EN 733. Flanges drilled according to ANSI 150 on request.* Slots suitable for bolts with dimensions indicated. Bolts are not included in the bare shaft pump standard scope of supply.


Table of Dimensions

All dimensions in mmSize BB Pump dimensions Foot dimensions Shaft end

DN2 DN1 a f h1 h2 b c m1 m2 n1 n2 s1* s2* w x d1 l t u1505001) 55 150 200 180 670 400 500 100 22 200 150 640 540 M20 M16 489 180 50 115 53.5 142003151) 55 200 250 200 670 355 450 100 22 200 150 550 450 M20 M16 489 180 50 115 53.5 142004001) 55 200 250 180 670 355 500 100 22 200 150 550 450 M20 M16 489 180 50 115 53.5 142005001) 55 200 250 200 670 425 560 100 22 200 150 660 560 M20 M16 489 180 50 115 53.5 142503001) 55 250 300 305 655 425 550 120 28 240 190 700 600 M20 M16 474 180 50 115 53.5 142503151) 55 250 300 250 670 375 560 120 28 240 190 620 520 M20 M16 489 180 50 115 53.5 142504001) 65 250 300 250 720 400 600 120 29 240 190 700 600 M20 M16 508 180 602) 145 64 182505001) 65 250 300 250 720 450 670 120 32 240 190 750 650 M20 M16 503 180 602) 145 64 183004001) 65 300 350 300 720 425 670 120 30 250 190 760 660 M24 M16 508 180 602) 145 64 183005001) 65 300 350 300 720 480 670 140 32 250 190 840 720 M24 M16 508 180 602) 145 64 18

1)Transnorm pump sizes, not included in DIN 24255 / EN 733. Flanges drilled according to ANSI 150 on request.2)For these sizes the clearance corresponds to m6.* Slots suitable for bolts with dimensions indicated. Bolts are not included in the bare shaft pump standard scope of supply.

Flange connections to DIN 2501 PN 16 DIN 2501 PN 10

DN2/DN1 32 40 50 65 80 100 125 150 200 250 300 350 400 100 125 150 200

D 140 150 165 185 200 220 250 285 340 405 460 520 580 220 250 285 340k 100 110 125 145 160 180 210 240 295 355 410 470 525 180 210 240 295

d2 x number 18x4 18x4 18x4 18x4 18x8 18x8 18x8 22x8 22x12 26x12 26x12 26x16 30x16 18x8 18x8 22x8 22x8


Connections for bearing brackets 25, 35 and 45

um1 : Pressure gauge. Only available on request uk1 : Quench Inlet um2 : Pressure gauge. Only available on request uk2 : Heating Inlet ue : Drainage uk3 : 051 Inlet (Stuffing box) ueo : Oil drainage uk4 : 052 External sealing (Stuffing box) uio : Constant level oiler uk5 : External Flushing ufo : Oil filling uk6 : Quench Outlet uAL : Drainage for leakage. Threaded hole only available on request uk7 : Heating Outlet us : Sensor uk8 : 051 Outlet (Stuffing box)

Size um1 um2 ue ueo uio ufo uAL us uk1 uk2 uk3 uk4 uk5 uk6 uk7 uk8321251)

321603220032250401251)

4016040200 G 1 / 44025040315501251)

5016050200 G 1 / 85025050315651251)

6516065200652506531580160 G 1 / 4802008025080315 G 3 / 8 G 1 / 4 ∅ 15.65 ∅ 13 M 880400 G 1 / 4100160100200100250100315

G 1 / 8

100400 G 1 / 4125200125250 G 1 / 8

125315125400 G 1 / 4

150200150250 G 1 / 8

150315150400200250

G 1 / 4

Certain construction sizes do not correspond in all details to the drawing.

1)Only for Impellers ∅ 125


Connections for bearing brackets 55 and 65.

um1 : Pressure gauge connection um2 : Pressure/vacuum gauge. Only available on request. um3 : Self sealing connection uk3 : 051 Inlet (Stuffing box) ue : Drainage uk4 : 052 External sealing (Stuffing box) ueo : Oil drainage uk8 : 051 Outlet (Stuffing box) uio : Constant level oiler umo : Oil level control ufo : Oil filling uk9 : 041 inlet (Stuffing box) uAL : Drainage for leakage

Size um1 um2 um3 ue ueo uio ufo uAL uk3 uk4 uk8 umo uk9150500200315200400200500250300250315 G1/2 G1/2 G1/4 G1/2 G1/4 G1/4 ∅ 20 G1/2 G1/4 G1/4 G1/4 G3/4 G1/4250400250500300400300500


Foundation plan, bearing brackets 25, 35 and 45.

Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B

MotorNL rpm Base Rag

Size 1450 2900 Size plate Cplg. Weight (kg) bolt

kW No. Pump Unit DN2 DN1 a b2 e1 e2 v f1 h3 h4 w* w1 size32-125 0.37 0.55 71 S008 B68 31 51 32 50 80 297 400 265 120 60 152 292 682 640 M12x100

- 0.75 80 S008 B68 31 54 32 50 80 297 400 265 120 60 152 292 716 640 M12x100- 1.10 80 S008 B68 31 54 32 50 80 297 400 265 120 60 152 292 716 640 M12x100- 1.50 90S S241 B68 31 66 32 50 80 330 480 290 125 60 177 317 774 730 M16x200- 2.20 90L S241 B68 31 68 32 50 80 330 480 290 125 60 177 317 774 730 M16x200

32-160 0.37 - 71 S270 B68 33 61 32 50 80 360 420 320 115 60 197 357 682 650 M16x2000.55 1.10 80 S270 B68 33 64 32 50 80 360 420 320 115 60 197 357 716 650 M16x200

- 1.50 90S S301 B68 33 72 32 50 80 390 480 350 125 60 197 357 774 730 M16x200- 2.20 90L S301 B68 33 74 32 50 80 390 480 350 125 60 197 357 774 730 M16x200- 3.00 100L S301 B80 33 84 32 50 80 390 480 350 125 60 197 357 815 730 M16x200- 4.00 112M S301 B80 33 85 32 50 80 390 480 350 125 60 197 357 836 730 M16x200- 5.50 132S S342 B95 33 106 32 50 80 450 540 400 140 60 212 372 895 820 M20x400- 7.50 132S S342 B95 33 89 32 50 80 450 540 400 140 60 212 372 912 820 M20x400

32-200 0.55 - 80 S270 B68 34 65 32 50 80 360 420 320 115 60 225 405 716 650 M16x2000.75 - 80 S270 B68 34 65 32 50 80 360 420 320 115 60 225 405 716 650 M16x2001.10 1.50 90S S301 B68 34 73 32 50 80 390 480 350 125 60 225 405 774 730 M16x2001.50 2.20 90L S301 B68 34 75 32 50 80 390 480 350 125 60 225 405 774 730 M16x200

- 3.00 100L S301 B80 34 85 32 50 80 390 480 350 125 60 225 405 815 730 M16x200- 4.00 112M S301 B80 34 86 32 50 80 390 480 350 125 60 225 405 836 730 M16x200- 5.50 132S S342 B95 34 123 32 50 80 450 540 400 140 60 240 420 912 820 M20x400- 7.50 132S S342 B95 34 123 32 50 80 450 540 400 140 60 240 420 912 820 M20x400- 15.00 160M S383 B95 34 142 32 50 80 490 600 440 160 60 240 420 1088 920 M20x400- 18.50 160L S344 B95 34 170 32 50 80 450 660 400 180 60 240 420 1150 1020 M20x400

32-250 0.75 - 80 S383 B68 46 97 32 50 100 490 600 440 160 75 260 485 736 920 M20x4001.10 - 90S S383 B68 46 100 32 50 100 490 600 440 160 75 260 485 794 920 M20x4001.50 - 90L S383 B68 46 102 32 50 100 490 600 440 160 75 260 485 794 920 M20x4002.20 - 100L S383 B80 46 112 32 50 100 490 600 440 160 75 260 485 835 920 M20x400

- 7.50 132S S383 B95 46 142 32 50 100 490 600 440 160 75 260 485 932 920 M20x400- 11.00 160M S383 B95 46 161 32 50 100 490 600 440 160 75 260 485 1050 920 M20x400- 15.00 160M S383 B95 46 161 32 50 100 490 600 440 160 75 260 485 1050 920 M20x400

40-125 0.37 - 71 S270 B68 28 56 40 65 80 360 420 320 115 60 177 317 682 650 M16x2000.55 1.10 80 S270 B68 28 59 40 65 80 360 420 320 115 60 177 317 716 650 M16x200

- 1.50 90S S241 B68 28 63 40 65 80 330 480 290 125 60 177 317 774 730 M16x200- 2.20 90L S241 B68 28 65 40 65 80 330 480 290 125 60 177 317 774 730 M16x200- 3.00 100L S241 B80 28 76 40 65 80 330 480 290 125 60 177 317 815 730 M16x200

40-160 0.37 - 71 S270 B68 30 58 40 65 80 360 420 320 115 60 197 357 682 650 M16x2000.55 - 80 S270 B68 30 61 40 65 80 360 420 320 115 60 197 357 716 650 M16x2000.75 1.10 80 S270 B68 30 61 40 65 80 360 420 320 115 60 197 357 716 650 M16x200

1.10 1.50 90S/L S301 B68 30 69 40 65 80 390 480 350 125 60 197 357 774 730 M16x200

- 3.00 100L S301 B80 30 81 40 65 80 390 480 350 125 60 197 357 815 730 M16x200- 4.00 112M S301 B80 30 82 40 65 80 390 480 350 125 60 197 357 836 730 M16x200- 5.50 132S S342 B95 30 119 40 65 80 450 540 400 140 60 212 372 912 820 M20x400- 7.50 132S S342 B95 30 129 40 65 80 450 540 400 140 60 212 372 895 820 M20x400- 11.00 160M S383 B95 30 150 40 65 80 490 600 440 160 60 212 372 1030 920 M20x400

40-200 0.55 - 80 S301 B68 36 72 40 65 100 390 480 350 125 60 225 405 736 730 M16x2000.75 - 80 S301 B68 36 72 40 65 100 390 480 350 125 60 225 405 736 730 M16x2001.10 - 90S S301 B68 36 75 40 65 100 390 480 350 125 60 225 405 794 730 M16x200




kW No. Pump Unit DN2 DN1 a b2 e1 e2 v f1 h3 h4 w* w1 size1.50 - 90L S301 B68 36 77 40 65 100 390 480 350 125 60 225 405 794 730 M16x200

40-200 - 3.00 100L S301 B80 36 86 40 65 100 390 480 350 125 60 225 405 835 730 M16x200- 4.00 112M S301 B80 36 88 40 65 100 390 480 350 125 60 225 405 856 730 M16x200- 5.50 132S S342 B95 36 125 40 65 100 450 540 400 140 60 240 420 932 820 M20x400- 7.50 132S S342 B95 36 125 40 65 100 450 540 400 140 60 240 420 932 820 M20x400- 11.00 160M S383 B95 36 151 40 65 100 490 600 440 160 60 240 420 1050 920 M20x400- 15.00 160M S383 B95 36 168 40 65 100 490 600 440 160 60 240 420 1050 920 M20x400

40-250 1.10 - 90S S383 B68 46 100 40 65 100 490 600 440 160 75 260 485 794 920 M20x4001.50 - 90L S383 B68 46 102 40 65 100 490 600 440 160 75 260 485 794 920 M20x4002.20 - 100L S383 B80 46 112 40 65 100 490 600 440 160 75 260 485 835 920 M20x4003.00 - 100L S383 B80 46 112 40 65 100 490 600 440 160 75 260 485 835 920 M20x400

- 7.50 132S S383 B95 46 142 40 65 100 490 600 440 160 75 260 485 932 920 M20x400- 11.00 160M S383 B95 46 161 40 65 100 490 600 440 160 75 260 485 1050 920 M20x400- 15.00 160M S383 B95 46 161 40 65 100 490 600 440 160 75 260 485 1050 920 M20x400- 18.50 160L S434 B95 46 205 40 65 100 540 660 490 170 75 260 485 1112 1000 M20x400

40-315 2.20 - 100L S383 B80 73 139 40 65 100 490 600 440 160 75 305 555 970 920 M20x4003.00 - 100L S383 B80 73 139 40 65 100 490 600 440 160 75 305 555 970 920 M20x4004.00 - 112M S383 B80 73 140 40 65 100 490 600 440 160 75 305 555 991 920 M20x4005.50 - 132S S434 B95 73 185 40 65 100 540 660 490 170 75 305 555 1067 1000 M20x400

- 15.00 160M S435 B95 73 188 40 65 100 540 740 490 200 75 305 575 1185 1140 M20x400- 18.50 160L S435 B95 73 232 40 65 100 540 740 490 200 75 305 575 1247 1140 M20x400- 22.00 180M S435 B110 73 245 40 65 100 540 740 490 200 75 305 575 1309 1140 M20x400- 30.00 200L S436 B125 73 312 40 65 100 540 840 490 215 75 305 757 1367 1270 M20x400

50-125 0.37 - 71 S270 B68 30 58 50 65 100 360 420 320 115 60 197 357 702 650 M16x2000.55 - 80 S270 B68 30 62 50 65 100 360 420 320 115 60 197 357 736 650 M16x2000.75 - 80 S270 B68 30 62 50 65 100 360 420 320 115 60 197 357 736 650 M16x200

- 1.50 90S S301 B68 30 69 50 65 100 390 480 350 125 60 197 357 794 730 M16x200- 2.20 90L S301 B68 30 71 50 65 100 390 480 350 125 60 197 357 794 730 M16x200- 3.00 100L S272 B80 30 81 50 65 100 360 540 320 140 60 197 357 835 820 M16x200- 4.00 112M S272 B80 30 82 50 65 100 360 540 320 140 60 197 357 856 820 M16x200- 5.50 132S S342 B95 30 119 50 65 100 450 540 400 140 60 212 372 932 820 M20x400

50-160 0.55 - 80 S301 B68 36 75 50 65 100 390 480 350 125 60 225 405 736 730 M16x2000.75 - 80 S301 B68 36 77 50 65 100 390 480 350 125 60 225 405 736 730 M16x2001.10 - 90S S301 B68 36 80 50 65 100 390 480 350 125 60 225 405 794 730 M16x200

- 2.20 90L S301 B68 36 77 50 65 100 390 480 350 125 60 225 405 794 730 M16x200- 3.00 100L S301 B80 36 87 50 65 100 390 480 350 125 60 225 405 835 730 M16x200- 4.00 112M S301 B80 36 88 50 65 100 390 480 350 125 60 225 405 856 730 M16x200- 5.50 132S S342 B95 36 125 50 65 100 450 540 400 140 60 240 420 932 820 M20x400- 7.50 132S S342 B95 36 125 50 65 100 450 540 400 140 60 240 420 932 820 M20x400- 11.00 160M S383 B95 36 151 50 65 100 490 600 440 160 60 240 420 1050 920 M20x400

50-200 0.75 - 80 S301 B68 40 76 50 65 100 390 480 350 125 60 225 425 736 730 M16x2001.10 - 90S S301 B68 40 79 50 65 100 390 480 350 125 60 225 425 794 730 M16x2001.50 - 90L S301 B68 40 81 50 65 100 390 480 350 125 60 225 425 794 730 M16x2002.20 - 100L S301 B80 40 91 50 65 100 390 480 350 125 60 225 425 835 730 M16x200

- 7.50 132S S342 B95 40 129 50 65 100 450 540 400 140 60 240 440 932 820 M20x400- 11.00 160M S383 B95 40 155 50 65 100 490 600 440 160 60 240 440 1050 920 M20x400- 15.00 160M S383 B95 40 170 50 65 100 490 600 440 160 60 240 440 1050 920 M20x400- 18.50 160L S344 B95 40 160 50 65 100 450 660 400 180 60 240 440 1050 1020 M20x400

50-250 1.50 - 90L S383 B68 50 106 50 65 100 490 600 440 160 75 260 485 794 920 M20x4002.20 - 100L S383 B80 50 116 50 65 100 490 600 440 160 75 260 485 835 920 M20x4003.00 - 100L S383 B80 50 116 50 65 100 490 600 440 160 75 260 485 835 920 M20x4004.00 - 112M S383 B80 50 117 50 65 100 490 600 440 160 75 260 485 856 920 M20x400

- 15.00 160M S383 B95 50 165 50 65 100 490 600 440 160 75 260 485 1050 920 M20x400- 18.50 160L S434 B95 50 209 50 65 100 540 660 490 170 75 260 485 1112 1000 M20x400- 22.00 180M S434 B110 50 222 50 65 100 540 660 490 170 75 260 485 1174 1000 M20x400- 30.00 200L S435 B125 50 289 50 65 100 540 740 490 200 75 280 505 1232 1140 M20x400

50-315 4.00 - 112M S383 B80 88 155 50 65 125 490 600 440 160 75 305 585 991 920 M20x4005.50 - 132S S434 B95 88 200 50 65 125 540 660 490 170 75 305 585 1067 1000 M20x4007.50 - 132M S434 B95 88 203 50 65 125 540 660 490 170 75 305 585 1093 1000 M20x400

- 22.00 180M S435 B110 88 286 50 65 125 540 740 490 200 75 305 585 1309 1140 M24x400- 30.00 200L S436 B125 88 346 50 65 125 540 840 490 215 75 305 585 1367 1270 M24x400- 37.00 200L S436 B125 88 346 50 65 125 540 840 490 215 75 305 585 1367 1270 M24x400- 45.00 225M S486 B125 88 411 50 65 125 610 840 550 205 75 325 605 1397 1250 M24x400- 55.00 250M S607 B140 88 633 50 65 125 730 940 670 230 75 350 630 1527 1400 M24x400

65-125 0.55 - 80 S342 B68 33 77 65 80 100 450 540 400 140 60 240 420 736 820 M20x4000.75 - 80 S342 B68 33 77 65 80 100 450 540 400 140 60 240 420 736 820 M20x400

- 3.00 100L S342 B80 33 93 65 80 100 450 540 400 140 60 240 420 835 820 M20x400- 4.00 112M S342 B80 33 94 65 80 100 450 540 400 140 60 240 420 856 820 M20x400- 5.50 132S S342 B95 33 122 65 80 100 450 540 400 140 60 240 420 932 820 M20x400- 7.50 132S S342 B95 33 122 65 80 100 450 540 400 140 60 240 420 932 820 M20x400

65-160 0.75 - 80 S342 B68 39 83 65 80 100 450 540 400 140 60 240 440 736 820 M20x4001.50 - 90L S342 B68 39 88 65 80 100 450 540 400 140 60 240 440 794 820 M20x4002.20 - 100L S342 B80 39 99 65 80 100 450 540 400 140 60 240 440 835 820 M20x400

- 5.50 132S S342 B95 39 128 65 80 100 450 540 400 140 60 240 440 932 820 M20x400- 7.50 132S S342 B95 39 128 65 80 100 450 540 400 140 60 240 440 932 820 M20x400- 11.00 160M S383 B95 39 154 65 80 100 490 600 440 160 60 240 440 1050 920 M20x400- 15.00 160M S383 B95 39 154 65 80 100 490 600 440 160 60 240 440 1050 920 M20x400

65-200 1.10 - 90S S383 B68 45 99 65 80 100 490 600 440 160 75 260 485 794 920 M20x4001.50 - 90L S383 B68 45 101 65 80 100 490 600 440 160 75 260 485 794 920 M20x4002.20 - 100L S383 B80 45 111 65 80 100 490 600 440 160 75 260 485 835 920 M20x400




kW No. Pump Unit DN2 DN1 a b2 e1 e2 v f1 h3 h4 w* w1 size3.00 - 100L S383 B80 45 111 65 80 100 490 600 440 160 75 260 485 835 920 M20x4004.00 - 112M S383 B80 45 112 65 80 100 490 600 440 160 75 260 485 856 920 M20x400

65-200 - 11.00 160M S383 B95 45 160 65 80 100 490 600 440 160 75 260 485 1050 920 M20x400- 15.00 160M S383 B95 45 160 65 80 100 490 600 440 160 75 260 485 1050 920 M20x400- 18.50 160L S434 B95 45 204 65 80 100 540 660 490 170 75 260 485 1112 1000 M20x400- 22.00 180M S434 B110 45 217 65 80 100 540 660 490 170 75 260 485 1174 1000 M20x400- 30.00 200L S435 B125 45 284 65 80 100 540 740 490 200 75 280 530 1232 1140 M20x400


- 18.50 160L S435 B95 70 236 65 80 100 540 740 490 200 90 280 530 1222 1140 M20x400- 22.00 180M S435 B110 70 249 65 80 100 540 740 490 200 90 280 530 1284 1140 M20x400- 30.00 200L S436 B125 70 316 65 80 100 540 840 490 215 90 280 530 1342 1270 M20x400- 37.00 200L S436 B125 70 316 65 80 100 540 840 490 215 90 280 530 1342 1270 M20x400- 45.00 225M S486 B125 70 393 65 80 100 610 840 550 205 90 325 575 1372 1250 M24x400

65-315 5.50 - 132S S486 B95 92 229 65 80 125 610 840 550 205 90 325 605 1067 1250 M24x4007.50 - 132M S486 B95 92 232 65 80 125 610 840 550 205 90 325 605 1093 1250 M24x400

11.00 - 160M S486 B95 92 248 65 80 125 610 840 550 205 90 325 605 1185 1250 M24x40015.00 - 160L S486 B110 92 278 65 80 125 610 840 550 205 90 325 605 1247 1250 M24x400

- 45.00 225M S486 B125 92 415 65 80 125 610 840 550 205 90 325 605 1397 1250 M24x400- 55.00 250M S607 B140 92 637 65 80 125 730 940 670 230 90 350 630 1527 1400 M24x400- 75.00 280S S609A B160 92 906 65 80 125 744 1200 696 300 90 380 660 1627 1800 M24x400- 90.00 280M S609A B160 92 956 65 80 125 744 1200 696 300 90 380 660 1627 1800 M24x400

80-160 0.75 - 80 S383 B68 43 94 80 100 125 490 600 440 160 75 260 485 761 920 M20x4001.10 - 90S S383 B68 43 97 80 100 125 490 600 440 160 75 260 485 819 920 M20x4001.50 - 90L S383 B68 43 99 80 100 125 490 600 440 160 75 260 485 819 920 M20x4002.20 - 100L S383 B80 43 109 80 100 125 490 600 440 160 75 260 485 860 920 M20x4003.00 - 100L S383 B80 43 109 80 100 125 490 600 440 160 75 260 485 860 920 M20x400

- 7.50 132S S383 B95 43 139 80 100 125 490 600 440 160 75 260 485 957 920 M20x400- 11.00 160M S383 B95 43 139 80 100 125 490 600 440 160 75 260 485 1075 920 M20x400- 15.00 160M S383 B95 43 158 80 100 125 490 600 440 160 75 260 485 1075 920 M20x400- 18.50 160L S434 B95 43 202 80 100 125 540 660 490 170 75 260 485 1137 1000 M20x400- 22.00 180M S434 B110 43 215 80 100 125 540 660 490 170 75 260 485 1199 1000 M20x400

80-200 1.50 - 90L S383 B80 60 116 80 100 125 490 600 440 160 75 260 510 929 920 M20x4002.20 - 100L S383 B80 60 126 80 100 125 490 600 440 160 75 260 510 970 920 M20x4003.00 - 100L S383 B80 60 126 80 100 125 490 600 440 160 75 260 510 970 920 M20x4004.00 - 112M S383 B80 60 127 80 100 125 490 600 440 160 75 260 510 991 920 M20x4005.50 - 132S S434 B95 60 172 80 100 125 540 660 490 170 75 260 510 1067 1000 M20x400

- 15.00 160M S434 B95 60 191 80 100 125 540 660 490 170 75 260 510 1185 1000 M20x400- 18.50 160L S435 B95 60 226 80 100 125 540 740 490 200 75 260 510 1247 1140 M20x400- 22.00 180M S435 B110 60 239 80 100 125 540 740 490 200 75 260 510 1309 1140 M20x400- 30.00 200L S436 B125 60 306 80 100 125 540 840 490 215 75 280 530 1367 1270 M20x400- 37.00 200L S436 B125 60 306 80 100 125 540 840 490 215 75 280 530 1367 1270 M20x400

80-250 3.00 - 100L S486 B80 75 183 80 100 125 610 840 550 205 90 300 580 970 1250 M24x4004.00 - 112M S486 B80 75 184 80 100 125 610 840 550 205 90 300 580 991 1250 M24x4005.50 - 132S S486 B95 75 212 80 100 125 610 840 550 205 90 300 580 1067 1250 M24x4007.50 - 132M S486 B95 75 215 80 100 125 610 840 550 205 90 300 580 1093 1250 M24x400

- 22.00 180M S486 B110 75 273 80 100 125 610 840 550 205 90 300 580 1309 1250 M24x400- 30.00 200L S486 B125 75 333 80 100 125 610 840 550 205 90 300 580 1367 1250 M24x400- 37.00 200L S486 B125 75 333 80 100 125 610 840 550 205 90 300 580 1367 1250 M24x400- 45.00 225M S486 B125 75 398 80 100 125 610 840 550 205 90 325 605 1397 1250 M24x400- 55.00 250M S607 B140 75 620 80 100 125 730 940 670 230 90 350 630 1527 1400 M24x400

80-315 5.50 - 132S S486 B95 95 232 80 100 125 610 840 550 205 90 350 665 1067 1250 M24x4007.50 - 132M S486 B95 95 235 80 100 125 610 840 550 205 90 350 665 1093 1250 M24x400

11.00 - 160M S486 B95 95 251 80 100 125 610 840 550 205 90 350 665 1185 1250 M24x40015.00 - 160L S486 B110 95 281 80 100 125 610 840 550 205 90 350 665 1247 1250 M24x400

- 55.00 250M S607 B140 95 640 80 100 125 730 940 670 230 90 350 665 1527 1400 M24x400- 75.00 280S S609A B160 95 910 80 100 125 744 1200 696 300 90 380 695 1627 1800 M24x400- 90.00 280M S609A B160 95 960 80 100 125 744 1200 696 300 90 380 695 1627 1800 M24x400

80-400 11.00 - 160M S486 B95 143 299 80 125 125 610 840 550 205 90 380 735 1245 1250 M24x40015.00 - 160L S486 B110 143 329 80 125 125 610 840 550 205 90 380 735 1307 1250 M24x40018.50 - 180M S486 B110 143 341 80 125 125 610 840 550 205 90 380 735 1369 1250 M24x40022.00 - 180L S486 B125 143 357 80 125 125 610 840 550 205 90 380 735 1369 1250 M24x40030.00 - 200L S486 B125 143 401 80 125 125 610 840 550 205 90 380 735 1427 1250 M24x400


- 18.50 160L S435 B95 78 244 100 125 125 540 740 490 200 90 280 560 1247 1140 M20x400- 22.00 180M S435 B110 78 257 100 125 125 540 740 490 200 90 280 560 1309 1140 M20x400- 30.00 200L S436 B125 78 324 100 125 125 540 840 490 215 90 280 560 1367 1270 M20x400- 37.00 200L S436 B125 78 324 100 125 125 540 840 490 215 90 280 560 1367 1270 M20x400

100-200 2.20 - 100L S434 B80 70 153 100 125 125 540 660 490 170 90 280 560 971 1000 M20x4003.00 - 100L S434 B80 70 153 100 125 125 540 660 490 170 90 280 560 971 1000 M20x4004.00 - 112M S434 B80 70 154 100 125 125 540 660 490 170 90 280 560 992 1000 M20x4005.50 - 132S S434 B95 70 182 100 125 125 540 660 490 170 90 300 580 1068 1000 M20x4007.50 - 132M S434 B95 70 185 100 125 125 540 660 490 170 90 300 580 1094 1000 M20x400

- 18.50 160L S435 B95 70 236 100 125 125 540 740 490 200 90 280 560 1247 1140 M20x400- 22.00 180M S435 B110 70 249 100 125 125 540 740 490 200 90 280 560 1309 1140 M20x400




kW No. Pump Unit DN2 DN1 a b2 e1 e2 v f1 h3 h4 w* w1 size- 30.00 200L S436 B125 70 316 100 125 125 540 840 490 215 90 280 560 1367 1270 M20x400- 37.00 200L S436 B125 70 316 100 125 125 540 840 490 215 90 280 560 1367 1270 M20x400- 45.00 225M S486 B125 70 393 100 125 125 610 840 550 205 90 325 605 1397 1250 M24x400

100-250 4.00 - 112M S486 B80 85 194 100 125 140 610 840 550 205 90 325 605 1006 1250 M24x4005.50 - 132S S486 B95 85 222 100 125 140 610 840 550 205 90 325 605 1082 1250 M24x4007.50 - 132M S486 B95 85 225 100 125 140 610 840 550 205 90 325 605 1108 1250 M24x400

11.00 - 160M S486 B95 85 241 100 125 140 610 840 550 205 90 325 605 1200 1250 M24x400- 30.00 200L S486 B125 85 343 100 125 140 610 840 550 205 90 325 605 1382 1250 M24x400- 37.00 200L S486 B125 85 343 100 125 140 610 840 550 205 90 325 605 1382 1250 M24x400- 45.00 225M S486 B125 85 408 100 125 140 610 840 550 205 90 325 605 1412 1250 M24x400- 55.00 250M S607 B140 85 630 100 125 140 730 940 670 230 90 350 630 1542 1400 M24x400- 75.00 280S S609A B160 85 899 100 125 140 744 1200 696 300 90 380 660 1642 1800 M24x400- 90.00 280M S609A B160 85 949 100 125 140 744 1200 696 300 90 380 660 1642 1800 M24x400

100-315 11.00 - 160M S486 B95 104 260 100 125 140 610 840 550 205 90 350 665 1200 1250 M24x40015.00 - 160L S486 B110 104 290 100 125 140 610 840 550 205 90 350 665 1262 1250 M24x40018.50 - 180M S486 B110 104 302 100 125 140 610 840 550 205 90 350 665 1324 1250 M24x40022.00 - 180L S486 B125 104 318 100 125 140 610 840 550 205 90 350 665 1324 1250 M24x400

100-400 15.00 - 160L S606 B110 177 391 100 125 140 730 840 670 205 110 380 735 1322 1250 M24x40018.50 - 180M S606 B110 177 403 100 125 140 730 840 670 205 110 380 735 1384 1250 M24x40022.00 - 180L S606 B125 177 420 100 125 140 730 840 670 205 110 380 735 1384 1250 M24x40030.00 - 200L S606 B125 177 464 100 125 140 730 840 670 205 110 380 735 1442 1250 M24x40037.00 - 225S S607 B140 177 552 100 125 140 730 940 670 230 110 380 735 1507 1400 M24x40045.00 - 225M S607 B140 177 542 100 125 140 730 940 670 230 110 380 735 1507 1400 M24x400

125-200 7.50 - 132M S486 B95 100 240 125 150 140 610 840 550 205 90 350 665 1108 1250 M24x40011.00 - 160M S486 B95 100 256 125 150 140 610 840 550 205 90 350 665 1200 1250 M24x40015.00 - 160L S486 B110 100 286 125 150 140 610 840 550 205 90 350 665 1262 1250 M24x400

- 55.00 250M S607 B140 100 645 125 150 140 730 940 670 230 90 350 665 1542 1400 M24x400- 75.00 280S S609A B160 100 914 125 150 140 744 1200 696 300 90 380 695 1642 1800 M24x400- 90.00 280M S609A B160 100 964 125 150 140 744 1200 696 300 90 380 695 1642 1800 M24x400

125-250 7.50 - 132M S486 B95 102 242 125 150 140 610 840 550 205 90 350 705 1108 1250 M24x40011.00 - 160M S486 B95 102 258 125 150 140 610 840 550 205 90 350 705 1200 1250 M24x40015.00 - 160L S486 B110 102 288 125 150 140 610 840 550 205 90 350 705 1262 1250 M24x400

125-315 15.00 - 160L S606 B110 151 365 125 150 140 730 840 670 205 110 380 735 1322 1250 M24x40018.50 - 180M S606 B110 151 377 125 150 140 730 840 670 205 110 380 735 1384 1250 M24x40022.00 - 180L S606 B125 151 394 125 150 140 730 840 670 205 110 380 735 1384 1250 M24x40030.00 - 200L S606 B125 151 438 125 150 140 730 840 670 205 110 380 735 1442 1250 M24x40037.00 - 225S S607 B140 151 496 125 150 140 730 940 670 230 110 380 735 1507 1400 M24x400

125-400 30.00 - 200L S606 B125 188 475 125 150 140 730 840 670 205 110 415 815 1442 1250 M24x40037.00 - 225S S607 B140 188 533 125 150 140 730 940 670 230 110 415 815 1507 1400 M24x40045.00 - 225M S607 B140 188 553 125 150 140 730 940 670 230 110 415 815 1507 1400 M24x40055.00 - 250M S607 B160 188 736 125 150 140 730 940 670 230 110 415 815 1602 1400 M24x40075.00 - 280S S609A B180 188 1007 125 150 140 744 1200 696 300 110 415 815 1702 1800 M24x400

150-200 7.50 - 132M S605 B95 123 281 150 200 160 730 740 670 190 110 380 780 1128 1120 M24x40011.00 - 160M S605 B95 123 297 150 200 160 730 740 670 190 110 380 780 1220 1120 M24x40015.00 - 160L S605 B110 123 326 150 200 160 730 740 670 190 110 380 780 1282 1120 M24x40018.50 - 180M S605 B110 123 338 150 200 160 730 740 670 190 110 380 780 1344 1120 M24x400

150-250 15.00 - 160L S605 B110 128 331 150 200 160 730 740 670 190 110 380 780 1282 1120 M24x40018.50 - 180M S605 B110 128 343 150 200 160 730 740 670 190 110 380 780 1344 1120 M24x40022.00 - 180L S606 B125 128 371 150 200 160 730 840 670 205 110 380 780 1344 1250 M24x40030.00 - 200L S606 B125 128 415 150 200 160 730 840 670 205 110 380 780 1402 1250 M24x400

150-315 22.00 - 180L S606 B125 170 413 150 200 160 730 840 670 205 110 380 780 1404 1250 M24x40030.00 - 200L S606 B125 170 457 150 200 160 730 840 670 205 110 380 780 1462 1250 M24x40037.00 - 225S S607 B140 170 515 150 200 160 730 940 670 230 110 380 780 1527 1400 M24x40045.00 - 225M S607 B140 170 535 150 200 160 730 940 670 230 110 380 780 1527 1400 M24x40055.00 250M S607 B160 170 718 150 200 160 730 940 670 230 110 380 780 1622 1400 M24x400

150-400 45.00 - 225M S607 B140 205 570 150 200 160 730 940 670 230 110 415 865 1527 1400 M24x40055.00 - 250M S607 B160 205 753 150 200 160 730 940 670 230 110 415 865 1622 1400 M24x40075.00 - 280S S609A B180 205 1024 150 200 160 744 1200 696 300 110 415 865 1722 1800 M24x40090.00 - 280M S609A B180 205 1074 150 200 160 744 1200 696 300 110 415 865 1722 1800 M24x400

200-250 15.00 - 160L S607 B110 230 457 200 200 160 730 940 670 230 185 380 780 1402 1400 M24x40018.50 - 180M S607 B110 230 469 200 200 160 730 940 670 230 185 380 780 1464 1400 M24x40022.00 - 180L S607 B125 230 486 200 200 160 730 940 670 230 185 380 780 1464 1400 M24x40030.00 - 200L S607 B125 230 530 200 200 160 730 940 670 230 185 380 780 1522 1400 M24x400

* Dimension w depends on the motor manufacturer.


Foundation plan, bearing brackets 55 and 65.

Dimensions in mmTolerances for welded parts acc. to DIN 8570 B n = 1450 rpm

Size Motor Baseplate

Cplg. Weight kg Rag bolt

size kW No. pump unit DN2 DN1 a b2 v e1 e2 v2 f1 h3 h4 w* w1180L 22 167x81x12 B125 674 810 170 1330 760 665 235 550 1050 1566 1670

200L 30 174x82x14 754 170 1400 700 1624 1740225S 37 178x82x14 B140 817 170 1440 720 1661 1780225M 45 845 820 170 240 570 1070 1661 M16x200250M 55 190x82x14 B160 955 190 1520 760 1784 1900

150-500 280S 75 198x82x14 B180 335 1136 150 200 180 190 1600 770 800 1859 1980280M 90 1186 190 1859315S 110 212x83x16 1397 210 1700 850 1994 2120315M 132 1477 830 210 1994315L 160 226x83x16 B200 1635 230 1800 900 245 590 1090 2134 2260 M18x200315L 200 1775 230 2134315 250 238x87x16 B225 1605 870 230 1920 810 960 2254 2380

180L 22 169x72x12 B125 659 720 170 1350 670 675 255 505 955 1586 1690200L 30 176x73x14 712 170 1420 710 1644 1760 M16x200

200-315 225S 37 180x73x14 B140 310 777 200 730 190 1420 680 710 1681 1800225M 45 805 190 260 525 975 1681250M 55 192x73x14 B160 915 190 1540 770 1804 1920280S 75 200x74x14 B180 1095 740 210 1580 690 790 1879 2000180L 22 167x72x12 B125 666 720 170 1330 670 665 235 505 1005 1566 1670200L 30 174x73x14 742 170 1400 700 1624 1740225S 37 178x73x14 B140 807 730 170 1440 680 720 1661 1780 M16x200225M 45 835 170 240 525 1025 1661250M 55 190x73x14 B160 945 190 1520 760 1784 1900

200-400 280S 75 198x74x14 B180 1125 740 190 1600 690 800 1859 1980280M 90 340 1175 180 190 1859315S 110 212x82x16 1400 210 1700 850 1994 2120315M 132 1480 200 250 820 210 760 1994315L 160 226x82x16 B200 1635 230 1800 900 245 545 1045 2134 2260 M18x200315L 200 1775 230 2134315 250 238x87x16 B225 1610 870 230 1920 810 960 2254 2380225M 45 180x84x14 B140 915 190 1420 710 1681 1800250M 55 192x84x14 B160 1025 840 190 1540 770 260 595 1155 1804 1920 M16x200280S 75 200x84x14 B180 1205 210 1580 790 1879 2000280M 90 1255 210 790 1879

200-500 315S 110 214x85x16 395 1465 200 210 1720 860 2014 2140315M 132 1545 850 210 2014315L 160 228x85x16 B200 1700 230 1820 910 265 615 1175 2154 2280315L 200 1840 230 2154 M18x200315 250 240x87x16 B225 1665 870 250 1900 810 950 2274 2400315 315 B250 1865 250 2274355 355 264x98x18 1965 980 270 2100 920 1050 270 635 1196 2499 2640





size kW No. pump unit DN2 DN1 a b2 v e1 e2 v2 f1 h3 h4 w* w1225S 37 189x88x14 B140 894 190 1510 755 1771 1890

250-300 225M 45 416 922 305 880 190 830 365 595 1145 1771 1890 M16x200250M 55 201x88x14 B160 1037 210 1590 795 1894 2010280S 75 209x88x14 B180 1217 210 1670 835 1969 2090200L 30 181x80x14 B125 842 190 1430 715 1694 1810225S 37 185x80x14 B140 902 190 1470 735 1731 1850225M 45 930 800 190 750 310 545 1105 1731 M16x200

250-315 250M 55 197x80x14 B160 424 1045 250 190 1590 795 1854 1970280S 75 205x80x14 B180 1225 210 1630 815 1929 2050280M 90 1275 210 1929315S 110 219x82x16 B200 1485 820 210 1770 760 885 315 565 1125 2064 2190 M18x200315M 132 1565 210 2064225S 37 190x88x14 B140 958 190 1520 760 1781 1900225M 45 985 190 1781250M 55 202x88x14 B160 1095 250 300 880 210 1600 800 310 570 1170 1904 2020 M16x200280S 75 210x88x14 B180 1275 210 1680 840 1979 2100

250-400 280M 90 1325 210 830 1979315S 110 224x89x16 464 1540 250 230 1780 890 2114 2240315M 132 B200 1620 230 2114315L 160 238x89x16 1775 890 230 1920 960 315 590 1190 2254 2380 M18x200315L 200 1915 230 2254315 250 250x89x16 B225 1735 250 2000 1000 2374 2500315 315 B250 2135 250 2374355 355 274x98x18 2040 980 270 2200 920 1100 320 610 1210 2599 2740

280S 75 210x93x14 B180 1407 930 210 1680 840 310 620 1290 1979 2100 M16x200280M 90 1456 210 1979315S 110 224x94x16 1671 230 1780 890 2114 2240315M 132 1755 230 2114

250-500 315L 160 238x94x16 B200 589 1910 250 230 1920 880 960 2254 2380 M18x200315L 200 2050 940 230 315 640 1310 2254315 250 250x94x16 B225 1860 250 2000 1000 2374 2500315 315 2160 250 2374355 355 274x98x18 B250 2165 980 270 2200 920 1100 320 660 1330 2599 2740355 400 2205 270 2599

225M 45 195x94x14 B140 1150 190 1570 785 1831 1950250M 55 207x94x14 B160 1260 940 210 1650 825 360 595 1265 1954 2070 M16x200280S 75 215x94x14 B180 1442 210 1730 865 2029 2150280M 90 1491 210 2029315S 110 229x95x16 1701 230 1830 890 915 2164 2290

300-400 315M 132 1785 230 2164315L 160 243x95x16 B200 1945 250 1930 965 2304 2430315L 200 620 2085 300 950 250 365 615 1285 2304 M18x200315 250 255x95x16 B225 1892 250 2050 1025 2424 2550315 315 2191 250 2424355 355 279x98x18 B250 2196 980 270 2250 920 1125 370 635 1305 2649 2790355 400 2240 270 2649

225M 45 195x102x14 B140 1270 300 350 190 1570 785 1831 1950250M 55 207x102x14 B160 1477 1020 210 1650 825 360 650 1320 1954 2070 M16x200280S 75 215x102x14 B180 1655 210 1730 865 2029 2150280M 90 1711 210 2029315S 110 229x103x16 1925 230 1830 915 2164 2290315M 132 2007 230 970 2164315L 160 243x103x16 B200 800 2170 300 1030 250 1930 965 365 670 1340 2304 2430

300-500 315L 200 2313 250 2304315 250 255x103x16 B225 2725 250 2050 1025 2424 2550 M18x200315 315 2939 250 2424355 355 B250 3372 270 2649355 400 279x104x18 3474 1040 270 2250 980 1125 2649 2790355 500 B280 3689 270 370 690 1360 2649400 560 4302 290 2849400 630 299x106x18 A315 4524 1060 290 2410 1000 1205 2849 2990400 710 4728 290 2849



Foundation plan for units with spacer type coupling, bearing brackets 25,35 and 45.

Dimensions in mm Tolerances for welded parts acc. to DIN 8570B


Size 1450 2900 plate Cplg. Weight (kg) boltKW Size No. pump unit DN2 DN1 a b2 e1 e2 v f1 h3 h4 x w* w1 size

32-125 0.37 0.55 71 S241 H80 31 62 32 50 80 330 480 290 125 60 177 317 100 780 730 M16x200- 0.75 80 S272 H80 31 70 32 50 80 360 540 320 140 60 177 317 100 814 820 M16x200- 1.10 80 S272 H80 31 70 32 50 80 360 540 320 140 60 177 317 100 814 820 M16x200- 1.50 90S S272 H80 31 73 32 50 80 360 540 320 140 60 177 317 100 872 820 M16x200- 2.20 90L S272 H80 31 75 32 50 80 360 540 320 140 60 177 317 100 872 820 M16x200

32-160 0.37 - 71 S301 H80 33 68 32 50 80 390 480 350 125 60 197 357 100 780 730 M16x2000.55 - 80 S272 H80 33 72 32 50 80 360 540 320 140 60 197 357 100 814 820 M16x200

- 1.50 90S S272 H80 33 75 32 50 80 360 540 320 140 60 212 372 100 872 820 M16x200- 2.20 90L S272 H80 33 77 32 50 80 360 540 320 140 60 212 372 100 872 820 M16x200- 3.00 100L S272 H80 33 87 32 50 80 360 540 320 140 60 212 372 100 913 820 M16x200- 4.00 112M S272 H80 33 88 32 50 80 360 540 320 140 60 212 372 100 934 820 M16x200- 5.50 132S S303 H95 33 90 32 50 80 390 600 350 160 60 212 372 100 993 920 M16x200- 7.50 132S S303 H95 33 90 32 50 80 390 600 350 160 60 212 372 100 1012 920 M16x200

32-200 0.55 - 80 S272 H80 34 73 32 50 80 360 540 320 140 60 225 405 100 814 820 M16x2000.75 - 80 S272 H80 34 73 32 50 80 360 540 320 140 60 225 405 100 814 820 M16x2001.10 - 90S S272 H80 34 76 32 50 80 360 540 320 140 60 225 405 100 872 820 M16x2001.50 2.20 90L S272 H80 34 78 32 50 80 360 540 320 140 60 225 405 100 872 820 M16x200

- 3.00 100L S272 H80 34 88 32 50 80 360 540 320 140 60 225 405 100 913 820 M16x200- 4.00 112M S272 H80 34 89 32 50 80 360 540 320 140 60 225 405 100 934 820 M16x200- 5.50 132S S303 H95 34 122 32 50 80 390 600 350 160 60 225 405 100 1010 920 M16x200- 7.50 132S S303 H95 34 122 32 50 80 390 600 350 160 60 225 405 100 1010 920 M16x200- 15.00 160M S344 H110 34 153 32 50 80 450 660 400 180 60 240 420 100 1128 1020 M20x400- 18.50 160L S385 H110 34 198 32 50 80 490 740 440 200 60 240 420 100 1190 1140 M20x400

32-250 0.75 - 80 S383 H80 46 99 32 50 100 490 600 440 160 75 260 485 100 834 920 M20x4001.10 - 90S S383 H80 46 102 32 50 100 490 600 440 160 75 260 485 100 892 920 M20x4001.50 - 90L S383 H80 46 104 32 50 100 490 600 440 160 75 260 485 100 892 920 M20x4002.20 - 100L S383 H80 46 114 32 50 100 490 600 440 160 75 260 485 100 933 920 M20x400

- 7.50 132S S383 H95 46 143 32 50 100 490 600 440 160 75 260 485 100 1030 920 M20x400- 11.0 160M S434 H95 46 178 32 50 100 540 660 460 170 75 260 485 100 1148 1000 M20x400- 15.0 160M S434 H95 46 178 32 50 100 540 660 460 170 75 260 485 100 1148 1000 M20x400

40-125 0.37 - 71 S241 H80 28 59 40 65 80 330 480 290 125 60 177 317 100 780 730 M16x2000.55 1.10 80 S272 H80 28 67 40 65 80 360 540 320 140 60 177 317 100 814 820 M16x200

- 1.50 90S S272 H80 28 70 40 65 80 360 540 320 140 60 177 317 100 872 820 M16x200- 2.20 90L S272 H80 28 72 40 65 80 360 540 320 140 60 177 317 100 872 820 M16x200- 3.00 100L S272 H80 28 82 40 65 80 360 540 320 140 60 177 317 100 913 820 M16x200

40-160 0.37 - 71 S301 H80 30 65 40 65 80 390 480 350 125 60 197 357 100 780 730 M16x2000.55 - 80 S272 H80 30 69 40 65 80 360 540 320 140 60 197 357 100 814 820 M16x2000.75 - 80 S272 H80 30 69 40 65 80 360 540 320 140 60 197 357 100 814 820 M16x2001.10 - 90S S272 H80 30 72 40 65 80 360 540 320 140 60 197 357 100 872 820 M16x200

- 3.00 100L S272 H80 30 84 40 65 80 360 540 320 140 60 197 357 100 913 820 M16x200- 4.00 112M S272 H80 30 85 40 65 80 360 540 320 140 60 197 357 100 934 820 M16x200- 5.50 132S S303 H95 30 118 40 65 80 390 600 350 160 60 197 357 100 1010 920 M16x200- 7.50 132S S303 H95 30 118 40 65 80 390 600 350 160 60 197 357 100 993 920 M16x200- 11.00 160M S344 H95 30 153 40 65 80 450 660 400 180 60 340 400 100 1128 1020 M20x400

40-200 0.55 - 80 S342 H80 36 82 40 65 100 450 540 400 140 60 240 420 100 834 820 M20x4000.75 - 80 S342 H80 36 82 40 65 100 450 540 400 140 60 240 420 100 834 820 M20x4001.10 - 90S S342 H80 36 85 40 65 100 450 540 400 140 60 240 420 100 892 820 M20x4001.50 - 90L S342 H80 36 87 40 65 100 450 540 400 140 60 240 420 100 892 820 M20x400




40-200 - 3.00 100L S342 H80 36 97 40 65 100 450 540 400 140 60 240 420 100 933 820 M20x400- 4.00 112M S342 H80 36 98 40 65 100 450 540 400 140 60 240 420 100 954 820 M20x400- 5.50 132S S303 H95 36 124 40 65 100 390 600 350 160 60 225 405 100 1030 920 M16x200- 7.50 132S S303 H95 36 124 40 65 100 390 600 350 160 60 225 405 100 1030 920 M16x200- 11.00 160M S344 H95 36 153 40 65 100 450 660 400 180 60 240 420 100 1148 1020 M20x400- 15.00 160M S344 H95 36 153 40 65 100 450 660 400 180 60 240 420 100 1148 1020 M20x400

40-250 1.10 - 90S S383 H80 46 102 40 65 100 490 600 440 160 75 260 485 100 892 920 M20x4001.50 - 90L S383 H80 46 114 40 65 100 490 600 440 160 75 260 485 100 892 920 M20x4002.20 - 100L S383 H80 46 114 40 65 100 490 600 440 160 75 260 485 100 933 920 M20x4003.00 - 100L S383 H80 46 114 40 65 100 490 600 440 160 75 260 485 100 933 920 M20x400

- 7.50 132S S383 H95 46 143 40 65 100 490 600 440 160 75 260 485 100 1030 920 M20x400- 11.00 160M S434 H95 46 178 40 65 100 540 660 490 170 75 260 485 100 1148 1000 M20x400- 15.00 160M S434 H95 46 178 40 65 100 540 660 490 170 75 260 485 100 1148 1000 M20x400- 18.50 160L S385 H95 46 208 40 65 100 490 740 440 200 75 260 485 100 1210 1140 M20x400

40-315 2.20 - 100L S434 H80 73 157 40 65 125 540 660 490 170 75 305 555 100 1068 1000 M20x4003.00 - 100L S434 H80 73 157 40 65 125 540 660 490 170 75 305 555 100 1068 1000 M20x4004.00 - 112M S434 H80 73 158 40 65 125 540 660 490 170 75 305 555 100 1089 1000 M20x4005.50 - 132S S435 H95 73 193 40 65 125 540 740 490 200 75 305 555 100 1165 1140 M20x400

- 15.00 160M S435 H95 73 205 40 65 125 540 740 490 200 75 305 555 100 1283 1140 M20x400- 18.50 160L S436 H95 73 235 40 65 125 540 840 490 215 75 305 555 100 1345 1270 M20x400- 22.00 180M S436 H110 73 254 40 65 125 540 840 490 215 75 305 555 100 1407 1270 M20x400- 30.00 200L S487 H125 73 315 40 65 125 610 940 550 240 75 325 575 100 1465 1420 M20x400

50-125 0.37 - 71 S301 H80 30 65 50 65 100 390 480 350 125 60 197 357 100 800 730 M16x2000.55 - 80 S272 H80 30 69 50 65 100 360 540 320 140 60 197 357 100 834 820 M16x2000.75 - 80 S272 H80 30 69 50 65 100 360 540 320 140 60 197 357 100 834 820 M16x200

- 1.50 90S S272 H80 30 72 50 65 100 360 540 320 140 60 197 357 100 892 820 M16x200- 2.20 90L S272 H80 30 74 50 65 100 360 540 320 140 60 197 357 100 892 820 M16x200- 3.00 100L S015 H80 30 91 50 65 100 361 600 325 160 60 182 342 100 933 920 M12x100- 4.00 112M S015 H80 30 92 50 65 100 361 600 325 160 60 182 342 100 954 920 M12x100- 5.50 132S S303 H95 30 118 50 65 100 390 600 350 160 60 197 357 100 1030 920 M16x200

50-160 0.55 - 80 S342 H80 36 82 50 65 100 450 540 400 140 60 240 420 100 834 820 M20x4000.75 - 80 S342 H80 36 82 50 65 100 450 540 400 140 60 240 420 100 834 820 M20x4001.10 - 90S S342 H80 36 85 50 65 100 450 540 400 140 60 240 420 100 892 820 M20x400

- 2.20 90L S342 H80 36 87 50 65 100 450 540 400 140 60 240 420 100 892 820 M20x400- 3.00 100L S342 H80 36 97 50 65 100 450 540 400 140 60 240 420 100 933 820 M20x400- 4.00 112M S342 H80 36 98 50 65 100 450 540 400 140 60 240 420 100 954 820 M20x400- 5.50 132S S303 H95 36 124 50 65 100 390 600 350 160 60 225 405 100 1030 920 M16x200- 7.50 132S S303 H95 36 124 50 65 100 390 600 350 160 60 225 405 100 1030 920 M16x200- 11.00 160M S344 H95 36 153 50 65 100 450 660 400 180 60 240 420 100 1148 1020 M20x400

50-200 0.75 - 80 S342 H80 40 86 50 65 100 450 540 400 140 60 240 440 100 834 820 M20x4001.10 - 90S S342 H80 40 89 50 65 100 450 540 400 140 60 240 440 100 892 820 M20x4001.50 - 90L S342 H80 40 91 50 65 100 450 540 400 140 60 240 440 100 892 820 M20x4002.20 - 100L S342 H80 40 101 50 65 100 450 540 400 140 60 240 440 100 933 820 M20x400

- 7.50 132S S303 H95 40 128 50 65 100 390 600 350 160 60 225 425 100 1030 920 M16x200- 11.00 160M S344 H95 40 157 50 65 100 450 660 400 180 60 240 440 100 1148 1020 M20x400- 15.00 160M S344 H95 40 157 50 65 100 450 660 400 180 60 240 440 100 1148 1020 M20x400- 18.50 160L S385 H95 40 192 50 65 100 490 740 440 200 60 240 440 100 1148 1140 M20x400

50-250 1.50 - 90L S383 H80 50 108 50 65 100 490 600 440 160 75 260 485 100 892 920 M20x4002.20 - 100L S383 H80 50 118 50 65 100 490 600 440 160 75 260 485 100 933 920 M20x4003.00 - 100L S383 H80 50 118 50 65 100 490 600 440 160 75 260 485 100 933 920 M20x4004.00 - 112M S383 H80 50 119 50 65 100 490 600 440 160 75 260 485 100 954 920 M20x400

- 15.00 160M S434 H95 50 182 50 65 100 540 660 490 170 75 260 485 100 1148 1000 M20x400- 18.50 160L S385 H95 50 212 50 65 100 490 740 440 200 75 260 485 100 1210 1140 M20x400- 22.00 180M S435 H110 50 231 50 65 100 540 740 490 200 75 260 485 100 1272 1140 M20x400- 30.00 200L S435 H125 50 292 50 65 100 540 740 490 200 75 280 505 100 1330 1140 M20x400

50-315 4.00 - 112M S434 H80 88 173 50 65 125 540 660 490 170 75 305 585 100 1089 1000 M20x4005.50 - 132S S435 H95 88 208 50 65 125 540 740 490 200 75 305 585 100 1165 1140 M20x4007.50 - 132M S435 H95 88 211 50 65 125 540 740 490 200 75 305 585 100 1191 1140 M20x400

- 22.00 180M S436 H110 88 288 50 65 125 540 840 490 215 75 305 585 100 1407 1270 M20x400- 30.00 200L S436 H125 88 372 50 65 125 540 840 490 215 75 305 585 100 1465 1270 M20x400- 37.00 200L S436 H125 88 372 50 65 125 540 840 490 215 75 305 585 100 1465 1270 M20x400- 45.00 225M S607 H125 88 455 50 65 125 730 940 670 230 75 325 605 100 1495 1400 M24x400- 55.00 250M S608 H140 88 655 50 65 125 730 1060 670 270 75 350 630 100 1625 1600 M24x400

65-125 0.55 - 80 S342 H80 33 79 65 80 100 450 540 400 140 60 240 420 100 834 820 M20x4000.75 - 80 S342 H80 33 79 65 80 100 450 540 400 140 60 240 420 100 834 820 M20x400

- 3.00 100L S342 H80 33 94 65 80 100 450 540 400 140 60 240 420 100 933 820 M20x400- 4.00 112M S342 H80 33 95 65 80 100 450 540 400 140 60 240 420 100 954 820 M20x400- 5.50 132S S383 H95 33 130 65 80 100 490 600 440 160 60 240 420 100 1030 920 M20x400- 7.50 132S S383 H95 33 130 65 80 100 490 600 440 160 60 240 420 100 1030 920 M20x400

65-160 0.75 - 80 S342 H80 39 85 65 80 100 450 540 400 140 60 240 440 100 834 820 M20x4001.50 - 90L S342 H80 39 90 65 80 100 450 540 400 140 60 240 440 100 892 820 M20x4002.20 - 100L S342 H80 39 100 65 80 100 450 540 400 140 60 240 440 100 933 820 M20x400

- 5.50 132S S383 H95 39 136 65 80 100 490 600 440 160 60 240 440 100 1030 920 M20x400- 7.50 132S S383 H95 39 136 65 80 100 490 600 440 160 60 240 440 100 1030 920 M20x400- 11.00 160M S344 H95 39 156 65 80 100 450 660 400 180 60 240 440 100 1148 1020 M20x400- 15.00 160M S344 H95 39 156 65 80 100 450 660 400 180 60 240 440 100 1188 1020 M20x400

65-200 1.10 - 90S S383 H80 45 101 65 80 100 490 600 440 160 75 260 485 140 932 920 M20x4001.50 - 90L S383 H80 45 103 65 80 100 490 600 440 160 75 260 485 140 932 920 M20x4002.20 - 100L S383 H80 45 113 65 80 100 490 600 440 160 75 260 485 140 973 920 M20x4003.00 - 100L S383 H80 45 113 65 80 100 490 600 440 160 75 260 485 140 973 920 M20x4004.00 - 112M S383 H80 45 114 65 80 100 490 600 440 160 75 260 485 140 994 920 M20x400




65-200 - 11.00 160M S385 H95 45 179 65 80 100 490 740 440 200 75 260 485 140 1188 1140 M20x400- 15.00 160M S385 H95 45 179 65 80 100 490 740 440 200 75 260 485 140 1188 1140 M20x400- 18.50 160L S385 H95 45 207 65 80 100 490 740 440 200 75 260 485 140 1250 1140 M20x400- 22.00 180M S435 H110 45 226 65 80 100 540 740 490 200 75 260 485 140 1312 1140 M20x400- 30.00 200L S436 H125 45 294 65 80 100 540 840 490 215 75 280 505 140 1370 1270 M20x400


- 18.50 160L S436 H95 70 244 65 80 100 540 840 490 215 90 280 530 140 1360 1270 M20x400- 22.00 180M S436 H110 70 258 65 80 100 540 840 490 215 90 280 530 140 1422 1270 M20x400- 30.00 200L S487 H125 70 354 65 80 100 610 940 550 240 90 300 550 140 1480 1420 M24x400- 37.00 200L S487 H125 70 354 65 80 100 610 940 550 240 90 300 550 140 1480 1420 M24x400- 45.00 225M S607 H125 70 437 65 80 100 730 940 670 230 90 325 575 140 1510 1400 M24x400

65-315 5.50 - 132S S486 H95 92 231 65 80 125 610 840 550 205 90 325 605 140 1205 1250 M24x4007.50 - 132M S486 H95 92 234 65 80 125 610 840 550 205 90 325 605 140 1231 1250 M24x400

11.00 - 160M S486 H95 92 250 65 80 125 610 840 550 205 90 325 605 140 1323 1250 M24x40015.00 - 160L S486 H110 92 280 65 80 125 610 840 550 205 90 325 605 140 1385 1250 M24x400

- 45.00 225M S607 H125 92 455 65 80 125 730 940 670 230 90 325 605 140 1535 1400 M24x400- 55.00 250M S608 H140 92 655 65 80 125 730 1060 670 270 90 350 630 140 1665 1600 M24x400

- 75.00 280S S609A H160

92 805 65 80 125744 1200 696 300

90380 660

1401765 1800

M24x400

- 90.00 280M S609A H160

92 855 65 80 125744 1200 696 300

90380 660

1401765 1800

M24x400

80-160 0.75 - 80 S383 H80 43 96 80 100 125 490 600 440 160 75 260 485 140 899 920 M20x4001.10 - 90S S383 H80 43 99 80 100 125 490 600 440 160 75 260 485 140 957 920 M20x4001.50 - 90L S383 H80 43 101 80 100 125 490 600 440 160 75 260 485 140 957 920 M20x4002.20 - 100L S383 H80 43 111 80 100 125 490 600 440 160 75 260 485 140 998 920 M20x4003.00 - 100L S383 H80 43 111 80 100 125 490 600 440 160 75 260 485 140 998 920 M20x400

- 7.50 132S S434 H95 43 156 80 100 125 540 660 490 170 75 260 485 140 1095 1000 M20x400- 11.00 160M S385 H95 43 177 80 100 125 490 740 440 200 75 260 485 140 1213 1140 M20x400- 15.00 160M S385 H95 43 177 80 100 125 490 740 440 200 75 260 485 140 1213 1140 M20x400- 18.50 160L S385 H95 43 205 80 100 125 490 740 440 200 75 260 485 140 1275 1140 M20x400- 22.00 180M S435 H110 43 224 80 100 125 540 740 490 200 75 260 485 140 1337 1140 M20x400

80-200 1.50 - 90L S434 H80 60 134 80 100 125 540 660 490 170 75 260 485 140 1067 1000 M20x4002.20 - 100L S434 H80 60 144 80 100 125 540 660 490 170 75 260 510 140 1108 1000 M20x4003.00 - 100L S434 H80 60 144 80 100 125 540 660 490 170 75 260 510 140 1108 1000 M20x4004.00 - 112M S434 H80 60 145 80 100 125 540 660 490 170 75 260 510 140 1129 1000 M20x4005.50 - 132S S435 H95 60 180 80 100 125 540 740 490 200 75 260 510 140 1205 1140 M20x400

- 15.00 160M S435 H95 60 199 80 100 125 540 740 490 200 75 260 510 140 1323 1140 M20x400- 18.50 160L S436 H95 60 234 80 100 125 540 840 490 215 75 260 510 140 1385 1270 M20x400- 22.00 180M S436 H110 60 248 80 100 125 540 840 490 215 75 260 510 140 1447 1270 M20x400- 30.00 200L S487 H125 60 344 80 100 125 610 940 550 240 75 300 550 140 1505 1420 M24x400- 37.00 200L S487 H125 60 344 80 100 125 610 940 550 240 75 300 550 140 1505 1420 M24x400

80-250 3.00 - 100L S486 H80 75 185 80 100 125 610 840 550 205 90 300 580 140 1108 1250 M24x4004.00 - 112M S486 H80 75 186 80 100 125 610 840 550 205 90 300 580 140 1129 1250 M24x4005.50 - 132S S486 H95 75 214 80 100 125 610 840 550 205 90 300 580 140 1208 1250 M24x4007.50 - 132M S486 H95 75 217 80 100 125 610 840 550 205 90 300 580 140 1234 1250 M24x400

- 22.00 180M S486 H110 75 275 80 100 125 610 840 550 205 90 300 580 140 1447 1250 M24x400- 30.00 200L S487 H125 75 359 80 100 125 610 940 550 240 90 300 580 140 1505 1420 M24x400- 37.00 200L S487 H125 75 359 80 100 125 610 940 550 240 90 300 580 140 1505 1420 M24x400- 45.00 225M S607 H125 75 442 80 100 125 730 940 670 230 90 325 605 140 1535 1400 M24x400- 55.00 250M S608 H140 75 642 80 100 125 730 1060 670 270 90 350 630 140 1665 1600 M24x400

80-315 5.50 - 132S S486 H95 95 234 80 100 125 610 840 550 205 90 350 665 140 1208 1250 M24x4007.50 - 132M S486 H95 95 236 80 100 125 610 840 550 205 90 350 665 140 1234 1250 M24x400

11.00 - 160M S486 H95 95 253 80 100 125 610 840 550 205 90 350 665 140 1326 1250 M24x40015.00 - 160L S486 H110 95 283 80 100 125 610 840 550 205 90 350 665 140 1388 1250 M24x400

- 55.00 250M S608 H140 95 658 80 100 125 730 1060 670 270 90 350 665 140 1665 1600 M24x400

- 75.00 280S S609A H160

95 808 80 100 125744 1200 696 300

90380 695

1401765 1800 M24x400

- 90.00 280M S609A H160 95 858 80 100 125 744 1200 696 300 90 380 695 140 1765 1800 M24x400

80-400 11.00 - 160M S486 H95 143 301 80 125 125 610 840 550 205 90 380 735 140 1383 1250 M24x40015.00 - 160L S607 H110 143 373 80 125 125 730 940 670 230 90 380 735 140 1383 1400 M24x40018.50 - 180M S607 H110 143 385 80 125 125 730 940 670 230 90 380 735 140 1507 1400 M24x40022.00 - 180L S607 H125 143 401 80 125 125 730 940 670 230 90 380 735 140 1507 1400 M24x40030.00 - 200L S607 H125 143 445 80 125 125 730 940 670 230 90 380 735 140 1565 1400 M24x400


- 18.50 160L S436 H95 78 252 100 125 125 540 840 490 215 90 280 560 140 1385 1270 M20x400- 22.00 180M S436 H110 78 266 100 125 125 540 840 490 215 90 280 560 140 1447 1270 M20x400- 30.00 200L S487 H125 78 362 100 125 125 610 940 550 240 90 300 580 140 1505 1420 M24x400- 37.00 200L S487 H125 78 362 100 125 125 610 940 550 240 90 300 580 140 1505 1420 M24x400

100-200 2.20 - 100L S434 H80 70 154 100 125 125 540 660 490 170 90 280 560 140 1108 1000 M20x4003.00 - 100L S434 H80 70 154 100 125 125 540 660 490 170 90 280 560 140 1108 1000 M20x4004.00 - 112M S434 H80 70 155 100 125 125 540 660 490 170 90 280 560 140 1129 1000 M20x4005.50 - 132S S435 H95 70 190 100 125 125 540 740 490 200 90 280 560 140 1205 1140 M20x4007.50 - 132M S435 H95 70 193 100 125 125 540 740 490 200 90 280 560 140 1231 1140 M20x400




100-200 - 18.50 160L S436 H95 70 244 100 125 125 540 840 490 215 90 280 560 140 1385 1270 M20x400- 22.00 180M S436 H110 70 258 100 125 125 540 840 490 215 90 280 560 140 1447 1270 M20x400- 30.00 200L S487 H125 70 354 100 125 125 610 940 550 240 90 300 580 140 1505 1420 M24x400- 37.00 200L S487 H125 70 354 100 125 125 610 940 550 240 90 300 580 140 1505 1420 M24x400- 45.00 225M S607 H125 70 437 100 125 125 730 940 670 230 90 325 605 140 1535 1400 M24x400

100-250 4.00 - 112M S486 H80 85 196 100 125 140 610 840 550 205 90 325 605 140 1144 1250 M24x4005.50 - 132S S486 H95 85 224 100 125 140 610 840 550 205 90 325 605 140 1220 1250 M24x4007.50 - 132M S486 H95 85 227 100 125 140 610 840 550 205 90 325 605 140 1246 1250 M24x400

11.00 - 160M S486 H95 85 243 100 125 140 610 840 550 205 90 325 605 140 1338 1250 M24x400- 30.00 200L S487 H125 85 369 100 125 140 610 940 550 240 90 325 605 140 1520 1420 M24x400- 37.00 200L S487 H125 85 369 100 125 140 610 940 550 240 90 325 605 140 1520 1420 M24x400- 45.00 225M S607 H125 85 452 100 125 140 730 940 670 230 90 325 605 140 1550 1400 M24x400- 55.00 250M S608 H140 85 652 100 125 140 730 1060 670 270 90 350 630 140 1680 1600 M24x400

- 75.00 280S S609A H160 85 905 100 125 140 744 1200 696 300 90 380 660 140 1780 1800 M24x400

- 90.00 280M S609A H160 85 955 100 125 140 744 1200 696 300 90 380 660 140 1780 1800 M24x400

100-315 11.00 - 160M S486 H95 104 262 100 125 140 610 840 550 205 90 350 665 140 1338 1250 M24x40015.00 - 160L S486 H110 104 292 100 125 140 610 840 550 205 90 350 665 140 1400 1250 M24x40018.50 - 180M S486 H110 104 304 100 125 140 610 840 550 205 90 350 665 140 1462 1250 M24x40022.00 - 180L S486 H125 104 320 100 125 140 610 840 550 205 90 350 665 140 1462 1250 M24x400

100-400 15.00 - 160L S607 H110 177 407 100 125 140 730 940 670 230 110 380 735 140 1460 1400 M24x40018.50 - 180M S607 H110 177 419 100 125 140 730 940 670 230 110 380 735 140 1522 1400 M24x40022.00 - 180L S607 H125 177 435 100 125 140 730 940 670 230 110 380 735 140 1522 1400 M24x40030.00 - 200L S607 H125 177 479 100 125 140 730 940 670 230 110 380 735 140 1580 1400 M24x40037.00 - 225S S608 H140 177 544 100 125 140 730 1060 670 270 110 380 735 140 1645 1600 M24x40045.00 - 225M S608 H140 177 564 100 125 140 730 1060 670 270 110 380 735 140 1645 1600 M24x400

125-200 7.50 - 132M S486 H95 100 242 125 150 140 610 840 550 205 90 350 665 140 1246 1250 M24x40011.00 - 160M S486 H95 100 258 125 150 140 610 840 550 205 90 350 665 140 1338 1250 M24x40015.00 - 160L S486 H110 100 288 125 150 140 610 840 550 205 90 350 665 140 1400 1250 M24x400

- 55.00 250M S608 H140 100 667 125 150 140 730 1060 670 270 90 350 665 140 1680 1600 M24x400

- 75.00 280S S609A H160 100 920 125 150 140 744 1200 696 300 90 380 695 140 1780 1800 M24x400

- 90.00 280M S609A H160 100 970 125 150 140 744 1200 696 300 90 380 695 140 1780 1800 M24x400

125-250 7.50 - 132M S486 H95 102 244 125 150 140 610 840 550 205 90 350 705 140 1246 1250 M24x40011.00 - 160M S486 H95 102 260 125 150 140 610 840 550 205 90 350 705 140 1338 1250 M24x40015.00 - 160L S486 H110 102 290 125 150 140 610 840 550 205 90 350 705 140 1400 1250 M24x400

125-315 15.00 - 160L S607 H110 151 381 125 150 140 730 940 670 230 110 380 735 140 1460 1400 M24x40018.50 - 180M S607 H110 151 393 125 150 140 730 940 670 230 110 380 735 140 1522 1400 M24x40022.00 - 180L S607 H125 151 409 125 150 140 730 940 670 230 110 380 735 140 1522 1400 M24x40030.00 - 200L S607 H125 151 453 125 150 140 730 940 670 230 110 380 735 140 1580 1400 M24x40037.00 - 225S S608 H140 151 518 125 150 140 730 1060 670 270 110 380 735 140 1645 1600 M24x400

125-400 30.00 - 200L S607 H125 188 490 125 150 140 730 940 670 230 110 415 815 140 1580 1400 M24x40037.00 - 225S S608 H140 188 555 125 150 140 730 1060 670 270 110 415 815 140 1645 1600 M24x40045.00 - 225M S608 H140 188 575 125 150 140 730 1060 670 270 110 415 815 140 1645 1600 M24x40055.00 - 250M S608 H160 188 759 125 150 140 730 1060 670 270 110 415 815 140 1740 1600 M24x400

75.00 - 280S S609A H180 188 1015 125 150 140 744 1200 696 300 110 415 815 140 1840 1800 M24x400

150-200 7.50 - 132M S605 H95 123 282 150 200 160 730 740 670 190 110 380 780 140 1266 1250 M24x40011.00 - 160M S606 H95 123 309 150 200 160 730 840 670 205 110 380 780 140 1358 1400 M24x40015.00 - 160L S606 H110 123 340 150 200 160 730 840 670 205 110 380 780 140 1423 1400 M24x40018.50 - 180M S606 H110 123 352 150 200 160 730 840 670 205 110 380 780 140 1482 1400 M24x400

150-250 15.00 - 160L S606 H110 128 345 150 200 160 730 940 670 230 110 380 780 140 1420 1250 M24x40018.50 - 180M S606 H110 128 357 150 200 160 730 940 670 230 110 380 780 140 1482 1250 M24x40022.00 - 180L S607 H125 128 386 150 200 160 730 940 670 230 110 380 780 140 1482 1400 M24x40030.00 - 200L S607 H125 128 430 150 200 160 730 940 670 230 110 380 780 140 1540 1400 M24x400

150-315 22.00 - 180L S607 H125 170 428 150 200 160 730 940 670 230 110 380 780 140 1542 1400 M24x40030.00 - 200L S607 H125 170 472 150 200 160 730 940 670 230 110 380 780 140 1600 1400 M24x40037.00 - 225S S608 H140 170 537 150 200 160 730 1060 670 270 110 380 780 140 1665 1600 M24x40045.00 - 225M S608 H140 170 557 150 200 160 730 1060 670 270 110 380 780 140 1665 1600 M24x40055.00 - 250M S608 H160 170 741 150 200 160 730 1060 670 270 110 380 780 140 1760 1600 M24x400

150-400 45.00 - 225M S608 H140 205 592 150 200 160 730 1060 670 270 110 415 865 140 1665 1600 M24x40055.00 - 250M S608 H160 205 776 150 200 160 730 1060 670 270 110 415 865 140 1760 1600 M24x400

75.00 - 280S S609A H180 205 1032 150 200 160 744 1200 696 300 110 415 865 140 1860 1800 M24x400

90.00 - 280M S609A H180 205 1082 150 200 160 744 1200 696 300 110 415 865 140 1860 1800 M24x400

200-250 15.00 - 160L S608 H110 230 477 200 200 160 730 1060 670 270 185 380 780 180 1580 1600 M24x40018.50 - 180M S608 H110 230 489 200 200 160 730 1060 670 270 185 380 780 180 1642 1600 M24x40022.00 - 180L S608 H125 230 505 200 200 160 730 1060 670 270 185 380 780 180 1642 1600 M24x40030.00 - 200L S608 H125 230 549 200 200 160 730 1060 670 270 185 380 780 180 1700 1600 M24x400



Foundation plan for units with spacer type coupling, bearing brackets 55 and 65.

Dimensions in mmTolerances for welded parts acc. to DIN 8570 B n = 1450 rpm


Cplg. Weight kg Ragbolt

size kW No. pump unit DN2 DN1 a b2 v e1 e2 v2 f1 h3 h4 x w* w1180L 22.0 185x81x12 H125 677 810 190 1470 760 735 235 550 1050 1742 1850200L 30.0 192x82x14 757 190 1540 770 1800 1920225S 37.0 196x82x14 H140 820 190 1580 790 1837 1960225M 45.0 850 820 190 240 570 1070 1837 M16250M 55.0 208x82x14 H160 961 150 200 210 1660 830 1960 2080 x200

150-500 280S 75.0 215x82x14 H180 335 1143 180 210 1730 770 865 2035 2150280M 90.0 1193 210 180 2035315S 110 230x83x16 1406 230 1840 920 2170 2300315M 132 1486 230 2170 M18315L 160 244x83x16 H200 1644 830 250 1940 970 245 590 1090 2310 2440 x200315L 200 1784 250 2310315 250 256x87x16 H225 1625 870 250 2060 810 1030 2430 2560

180L 22.0 187x72x12 H125 662 720 190 1490 670 745 255 505 955 1762 1870200L 30.0 194x73x14 715 190 1560 780 1820 1940 M18

200-315 225S 37.0 198x73x14 H140 310 780 200 730 190 1600 680 800 1857 1980 x200225M 45.0 810 190 260 525 975 180 1857250M 55.0 210x73x14 H160 921 210 1680 840 1980 2100280S 75.0 217x74x14 H180 1102 740 210 1750 690 875 2055 2170180L 22.0 185x72x12 H125 669 720 190 1470 670 735 235 505 1005 1742 1850200L 30.0 192x73x14 745 190 1540 770 1800 1920225S 37.0 196x73x14 H140 810 730 190 1580 680 790 1837 1960 M16225M 45.0 840 190 240 525 1025 1837 x200250M 55.0 208x73x14 H160 951 210 1660 830 1960 2080

200-400 280S 75.0 215x74x14 H180 340 1132 200 250 180 740 210 1730 690 865 180 2035 2150280M 90.0 1182 210 2035315S 110 230x82x16 1409 230 1840 920 2170 2300315M 132 1489 230 760 2170315L 160 244x82x16 H200 1644 820 250 1940 970 245 545 1045 2310 2440 M18315L 200 1784 250 2310 x200315 250 256x87x16 H225 1630 870 250 2060 810 1030 2430 2560

225M 45.0 198x84x14 H140 920 190 1600 800 1857 1980250M 55.0 210x84x14 H160 1031 840 210 1680 840 260 595 1155 1980 2100 M16280S 75.0 217x84x14 H180 1212 210 1750 875 2055 2170 x200280M 90.0 1262 210 790 2055

200-500 315S 110 232x85x16 1474 230 1860 930 180 2190 2320315M 132 395 1554 200 850 230 2190315L 160 246x85x16 H200 1709 250 1960 980 265 2330 2460315L 200 1849 250 615 1175 2330 M18315 250 258x87x16 H225 1685 870 250 2080 810 1040 2450 2580 x200315 315 H250 1885 250 2450355 355 281x98x18 1985 980 290 2230 920 1115 270 635 1195 2675 2810





size kW No. pump unit DN2 DN1 a b2 v e1 e2 v2 f1 h3 h4 x w* w1225S 37 207x88x14 H140 898 1650 825 1947 2070

250-300 225M 45 416 928 305 880 210 830 365 595 1145 180 1947 M16x200250M 55 219x88x14 H160 1044 1770 885 2070 2190280S 75 226x88x14 H180 1225 230 1800 900 2145 2260200L 30 199x80x14 H125 846 190 1870 1990225S 37 203x80x14 H140 906 210 1610 805 1907 2030225M 45 936 800 210 750 310 545 1105 1907 M164x200

250-315 250M 55 215x80x14 H160 424 1052 250 210 1730 865 180 2030 2150280S 75 222x80x14 H180 1233 230 1760 880 2105 2220280M 90 1283 230 2105315S 110 237x82x16 H200 1496 820 230 1910 760 955 315 565 1125 2240 2370 M18x200315M 132 1576 230 2240225S 37 208x88x14 H140 962 210 1660 830 1957 2080225M 45 991 210 1957250M 55 220x88x14 H160 1103 250 300 880 230 1740 870 310 570 1170 2080 2200 M16x200280S 75 227x88x14 H180 1284 230 1810 905 2155 2270

250-400 280M 90 464 1334 250 230 2155315S 110 242x89x16 1552 250 1920 830 960 180 2290 2420315M 132 H200 1632 250 2290315L 160 256x89x16 1787 890 250 2060 1030 315 590 1190 2430 2560315L 200 1927 250 2430 M18x200315 250 268x89x16 H225 1758 270 2140 1070 2550 2680315 315 H250 2158 270 2550355 355 291x98x18 2063 980 290 2330 920 1165 320 610 1210 2775 2910

280S 75 227x93x14 H180 1431 930 230 1810 905 310 620 1290 2155 2270 M16x200280M 90 1480 230 2155315S 110 242x94x16 1703 250 1920 960 2290 2420315M 132 H200 1780 250 880 2290

250-500 315L 160 256x94x16 589 1933 250 940 250 2060 1030 315 640 1310 180 2430 2560315L 200 2068 250 2430 M18x200315 250 268x94x16 H225 1903 270 2140 1070 2550 2680315 315 2197 270 2550355 355 291x98x18 H250 2202 980 290 2330 920 1165 320 660 1330 2775 2910355 400 2242 290 2775

225M 45 213X94X14 H140 1143 210 1710 855 2007 2130250M 55 225X94X14 H160 1243 940 230 1790 895 360 595 1265 2130 2250 M16x200280S 75 232X94X14 H180 1466 230 1860 930 2205 2320280M 90 1515 230 2205315S 110 247X95X16 1733 250 1970 890 985 2340 2470

300-400 315M 132 H200 1810 300 250 2340315L 160 261X95X16 1968 950 270 2070 1035 365 615 1285 180 2480 2610315L 200 620 2103 270 2480 M18x200315 250 273X95X16 H225 1949 270 2190 1095 2600 2730315 315 2248 270 2600355 355 296X98X18 H250 2253 980 290 2380 920 1190 370 635 1305 2825 2960355 400 2290 300 350 290 2825

225M 45 213x102x14 H140 1263 210 1710 855 2007 2130250M 55 225x102x14 H160 1471 1020 230 1790 895 360 650 1320 2130 2250 M16x200280S 75 232x102x14 H180 1654 230 1860 930 2205 2320280M 90 1711 230 2205315S 110 247x103x16 1925 250 1970 970 985 2340 2470315M 132 H200 2007 250 2340315L 160 261x103x16 2170 270 2070 1035 365 670 1340 180 2480 2610

300-500 315L 200 800 2313 300 1030 270 2480 M18x200315 250 273x103x16 H225 2720 270 2190 1095 2600 2730315 315 2938 270 2600355 355 296x104x18 H250 3372 1040 290 2380 980 1190 370 690 1360 2825 2960355 400 3474 290 2825355 500400 560 ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **400 630400 710


** On request.


Data regarding size - order information

Type Size Hydraulic + Bearing Shaft Seal Material Casing Gasket

A• First hydraulic

B• Second hydraulic

D• Double volute

•B Two ball bearingsgreased for life (2Z)

•C Two ball bearings oillubricated

•S One double rowangular contact bearingplus one ball bearing,grease lubricated

•T One double row ballbearing plus ball bearing,oil lubricated

•2 Oil lubricationconfigurations with CLO

041: Self-sealed, uncooled packing rings052: Uncooled packing rings, external seal liquidAF3: Balanced mechanical seal, seal face materials

SiC/Carbon, elastomer EPDMBJ3: Unbalanced bellows mechanical seal, seal face

materials SiC/Carbon, elastomer EPDMC23: Unbalanced bellows mechanical seal, seal face

materials SiC/Carbon, elastomer EPDMAFS: Balanced mechanical seal, seal face materials

SiC/ SiC, elastomer FPM (Viton)BJS: Unbalanced bellows mechanical seal, seal face

materials SiC/ SiC, elastomer FPM (Viton)C2S: Unbalanced bellows mechanical seal, seal face

materials SiC/ SiC, elastomer FPM (Viton)AFK: Balanced mechanical seal, seal face materials

SiC/carbon, elastomer FPM (Viton) double PTFE(Teflon) wrapped

BJJ: Unbalanced bellows mechanical seal, seal facematerials SiC/Carbon, elastomer FPM (Viton)

C2J: Unbalanced bellows mechanical seal, seal facematerials SiC/Carbon, elastomer FPM (Viton)

AX3,AXS,AXK: AF3,AFS,AFK plus quenchAY3,AYS,AYK: AF3,AFS,AFK. plus heatingA93,A9S,A9K: AF3,AFS,AFK plus external flushing

0B: Cast iron GG25

0C: Cast iron GG25Bronze G-CuSn10impeller

0E: Cast iron GG25stainless steel 1.4408impeller

4B: Stainless steel1.4408

2: Confined flatgasket of EWP210 material

4: Confined flatgasket ofPTFE.

32125 AB, AC or A232160 AB, AC, A2, BB,BC or B232200 AB, AC, A2, BB,BC or B232250401254016040200402504031550125501605020050250503156512565160652006525065315801608020080250 AB, AC or A2 Alternatively Alternatively Alternatively80315

NL 80400 041,052,BJ3,C23,AF3,AX3,AY3,A93,BJS,C2S, 0B, 0C, 0E, 4B 2 or 4100160 AFS,AXS,AYS,A9S,BJJ,C2J,AFK,AXK,AYK,A9K100200100250100315100400125200125250125315125400150200150250150315150400150500 AS, AT or A2200250 AB, AC or A2200315 AS , AT or A2200400200500 DS, DT or D2250300250315 AS, AT or A2250400250500 DS, DT or D2300400300500


COPYRIGHT WARNINGPlease read this notice

The material you are viewing in this document is protectedby Copyright and may only be used in accordance with

Copyright, Designs and Patent legislation. It is not permitted to copy - either in full or in

part - nor substantially extract, reproduce or re-use anyof the contents of this document in any material form or in

any medium without permission from the Copyright holders or their assignees. Any unlawful use of the

material in this document may result in claims for civilremedies, including an injunction to restrain further use

and a claim for damages; or may result in criminal penalties.


ABS Head OfficeBox 2056, 431 02 Mölndal, Sweden.Telephone +46 31 83 63 00 Telefax +46 31 18 49 [email protected]

Date post:	06-Apr-2018
Category:	Documents
Upload:	ngolien
View:	244 times
Download:	4 times

Volute casing pumps NL 32 - 125 300 - 500 · Volute casing pumps NL 32 - 125 ... 300 - 500 ... the...

Documents