Date post: | 08-Apr-2018 |
Category: |
Documents |
Upload: | nev-cockerham |
View: | 213 times |
Download: | 0 times |
of 24
8/6/2019 Web&Walk t Mobile
1/24
8/6/2019 Web&Walk t Mobile
2/24
Copyright 2008 T-Mobile GmbH.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks
and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other
trademarks mentioned in this manual are the property of their respective holders.
Notice
The information in this manual is subject to change without notice. Every effort
has been made in the preparation of this manual to ensure accuracy of the contents,
but all statements, information, and recommendations in this manual do not
constitute the warranty of any kind, expressed or implied.
8/6/2019 Web&Walk t Mobile
3/24
i
Contents
1 Descriptions of the webnwalk Manager GUI ....................................................................1
Launch the webnwalk Manager..................................................................................1Interface Overview ........................................................................................................1
2 Internet Services....................................................................................................................3
Accessing the Internet ...................................................................................................3
Statistics Information.....................................................................................................3
3 Text Services .........................................................................................................................4
Creating and Sending a Message ..................................................................................4Inbox ..............................................................................................................................4
Outbox ...........................................................................................................................6
Important, Draft, Deleted and Report............................................................................6
Viewing a Message in the SIM Card.............................................................................6
Text Settings ..................................................................................................................7
4 Phonebook.............................................................................................................................9
Phonebook Management in Local.................................................................................9
Phonebook Management in the SIM Card ..................................................................11
Import/Export ..............................................................................................................12
5 Settings and Information Query..........................................................................................14
Switching a Language .................................................................................................14
PIN Operations ............................................................................................................14
Choosing a Device.......................................................................................................15Viewing Diagnostics Information ...............................................................................15
Startup Settings............................................................................................................16
Profile Management ....................................................................................................16
Network Settings .........................................................................................................17
Online Update..............................................................................................................18
Optimization Settings ..................................................................................................19
6 FAQs....................................................................................................................................20
7 Acronyms and Abbreviations..............................................................................................21
8/6/2019 Web&Walk t Mobile
4/24
1
1Descriptions of the webnwalk
Manager GUI
Launch the webnwalk Manager
To launch the webnwalk Manager, double-click the shortcut icon of thewebnw
Note:
enter
d clickOK. If you fail to enter the correct PIN or PIN
Unblocking Key (PUK) code, the network-related functions are unavailable.
The SIM card is supplied by the service provider. For details, contact your
erview
alk Manager on the desktop.
If you are required to enter the Personal Identification Number (PIN) code,
the correct one an
service provider.
Interface Ov
Short
e lists th bnwalk manager.
cut Icons
The following tabl e shortcut icons provided by the we
Click ToDisplay the Connection interface.
Query the statistics of the transferred data.
Display the Text interface.
Display the Phonebook interface.
8/6/2019 Web&Walk t Mobile
5/24
2
Click To
Access the Internet
(For Austria T-Mobile and UK T-Mobile)
Connect to T-Mobile mail box
(Only for Austria T-Mobile)
Connect to the Internet and query the charge information
(Only for Austria T-Mobile)
St
The following tabl ll th
atus Information
e lists a e possible status information.
Status Information Description
Network signal Indicate the signal strength of the network by the following
icons:
Network information nt networDisplay the profile of the cur k.re
New message If the text prompt is enabled, when there is a new message:
In the status bar, the icon f
On the lower right corner of the P
lashes.
C screen, the Prompt
dialog box is displayed.
Unread message When there is an unread message:
In the status bar, the icon flashes.
When you move the cursor to the icon, the number of the
unread message(s) is displayed.
Network connection tion:Th ormation of the network connece inf
: The network is connected.
: The network is disconnected.
Transferred data : Data download is in progress.
: Data upload is in progress.
8/6/2019 Web&Walk t Mobile
6/24
3
2Internet Services
Accessing the Internet
After setting the network and connection profiles, you can click to access the
.
Statistics Information
network through the webnwalk Manager
You can use the Statistics function to check the traffic of the network.
Viewing atistics Information
as fol s to view the statistics information:
the St
You can do low
1. Click .
In the navigation tree, click the following tabs to displa2. y the corresponding diagram.
Transfer: View the uploaded/downloaded speed and data of the current connection.
on, last reset time, and Statistics: View the current connected durati
daily/monthly/yearly uploaded and downloaded data.
Resetting the Statistics Information
istics information:
. In the navigation tree, right-click a tab.
Choose Reset Statistics.
. In the Confirm dialog box, clickYes.
You can operate as follows to reset the stat
1
2.
3
8/6/2019 Web&Walk t Mobile
7/24
4
3 ailbox can store the messagessage
Text Services
The webnwalk Manager provides Text services. The local m
without capacity limitation and can be easily managed.
Creating and Sending a Mes
to display the Text interface.1. Click
2. Click to display the New interface.
y one of the following options:
elect Number interface.
kSave: To save the message in the draft.
kClose: To exit from editing the current message. If you clickYes in the Confirm
dial
Note:
d
tain 2,048 English letters at most.
Each message can contain 160 English letters at most. If the message content
exceeds the maximum size, the system automatically split it into several
messages to send.
3. Enter the recipient number b
ClickSend To.... Then select a phone number in the S
Enter the recipient number directly.
4. Enter the message content.
5. After the edit, you can choose the following options:
ClickSend: To send the message.
Clic
Clic
og box, the message can be saved in the Draft.
You can group send a message to up to 20 phone numbers. Each number shoul
be separated by ";".
A message can con
Inbox
Inbox stor eceived messages.
In
1. Click
es the r
To display the box interface, do as follows:
to display the Text interface.
2. Choose Local > Inbox to display the Inbox interface.
8/6/2019 Web&Walk t Mobile
8/24
5
Searching a Message
Click . Then enter the name/phone number of the message sender, part of the message
content or received time.
Note: You can enter part of the message content to search. Each field of the message
can be supported.
When you search the message, a list of the matched messages is updated
automatically according to your entered information. The matched contacts in
the searched group are displayed. None is displayed when no matched message
can be searched.
Viewing a Message
You can view a message in the inbox as follows:
1. Select a message to read.
2. Click the selected message.
The name and phone number of the message sender, message content and receiving
time are displayed below the message list.
3. Right-click the selected message for the following options:
Edit: Re-edit the message.
Reply: In the Edit interface, re-edit the message and send it to the message sender. Forward: Forward the message to another person
Save Number: In the New Contact interface, enter other information and save the
contact.
Delete: Delete the message.
Delete All: Delete All the messages in the inbox.
Note:
You can press and hold Shift or Ctrl, and click the selected messages; or you
can press Ctrl + A to select all the messages in the list. The messages deleted from the inbox are stored in the trash.
You can forward only one message a time.
You can also click the shortcut icons above the message list to perform the following
operations:
: Reply the selected message.
: Forward the selected message.
: Delete the selected message.
8/6/2019 Web&Walk t Mobile
9/24
6
Outbox
Outbox stores the sent messages, including the messages sent both successfully and
unsuccessfully.
To display the Outbox interface, do as follows:
1. Click to display the Text interface.
2. Choose Local > Outbox to display the Outbox interface.
Note:
For details, refer to "Inbox" on page 4.
Important, Draft, Deleted and Report
Important stores your important messages.
Draft stores the drafts of messages.
Deleted stores the messages deleted from the local mailbox.
Report stores the delivery notifications after sending messages.
Note: For details, refer to "Inbox" on page 4.
The Deleted does not store the messages deleted from the SIM card.
If you delete the messages in the Deleted, the messages will be deleted
permanently. Be cautious with your operation.
Viewing a Message in the SIM Card
If a SIM card is used in your terminal, you can save the sent and received messages in theSIM card.
The operations to the messages in the SIM card are as same as those to the messages in the
local message box. For details, refer to "Inbox" on page 4.
Note
Contact your service provider for whether a SIM card is needed.
The SIM card is supplied by the service provider. For details, contact your
service provider.
8/6/2019 Web&Walk t Mobile
10/24
7
You can move a message from the SIM card to the local inbox or local outbox.
1. Click to display the Text interface.
2. Click the SIM tab.
3. Select one or more contacts in the contact list and right-click.4. Right-click the selected message(s) for the following options:
Move to Local: Move the selected messages from the SIM card to Local.
Move All to Local: Move all the messages from the SIM card to Local.
5. In the Confirm dialog box, clickOK.
Note:
When the messages in the SIM card are moved to Local, the messages are
deleted from the SIM card.
The received messages in the SIM card are moved to the local inbox, and thesent messages in the SIM card are moved to the local outbox.
Text Settings
Choose Tools > Options, and click the Text folder.
Text handing SettingsIn the Text message prompt area, you can select the visual prompt and audio prompt.
Option Description
Show a notification
when a new text
message arrives
When there is a new text message, a dialog box is
displayed. Then you can:
ClickView to view the new message.
ClickClose to view the message later.
Play a sound when anew text message arrives
You can perform the following operations: ClickBrowse to select a text message tone file.
ClickTest to play the text message tone; clickStop to
stop playing the text message tone.
Then, when there is a new message, the selected text
message tone is played.
Note:
The text message tone must be a *.wav or *.mid file.
8/6/2019 Web&Walk t Mobile
11/24
8/6/2019 Web&Walk t Mobile
12/24
9
4k
he webnwalk Manager.
Phonebook Management in Local
Phoneboo
You can manage contacts in the phonebook conveniently by t
You can do as follows to enter the local phonebook:
1. Click to displ
2. ClickLocal in the navigation tr
ay the Phonebook interface.
ee.
Creating a Contact
1. Click to display the New Contact interface.
er the information.
3. Clic
Note:
The contact information cannot be null or contain spaces or new-line characters
2. Ent
kOK to save the contact.
only.
Sear g a Contactchin
Click . Then enter the contact information.
Note:
ct
ou search the contact, the contact list is updated automatically according
to your entered information. The matched contacts in the searched group are
displayed. None is displayed when no matched contact can be searched in the
You can enter part of the contact information to search. Each field of the conta
can be supported.
When y
group.
8/6/2019 Web&Walk t Mobile
13/24
10
Viewing a Contact
You can view a contact as follows:
Enter the local phonebook, select a contact to1. view.
2. Click the selected contact.
The contact name, mobile number, office number, home number, E-mail address and
Edit Contact: Change the information of the contact.
s above the contact list to perform the following
tions:
remarks are displayed below the contact list.
3. Right-click the selected contact, and you can do as follows:
Delete Contact: Delete the contact.
Send: Send a message or name card to the mobile number of the contact.
Yo also click the shortcut icon
oper
u can
a
: Edit the selected contact.
: Delete the selected contact.
: Send a message or name card to the mobile number of the contact.
Group Management
You can create a group to manage the local contacts by category.
anage localcontacts by category.
ht-clickLocal in the navigation tree, and choose New Group.
2. Ent
ote:
identical to any existing one.cal contacts by group.
ect a group to modify.
h me Group.
3. Ent
ote:
me the two default groups, Local and SIM card.
Creating a Group
You can create a group to m
1. Rig
er the group name.
N
The group name cannot be null or
You can manage only lo
Modifying a Group Name
1. Sel
2. Rig t-click the selected group in the navigation tree, and choose Rena
er the new group name.
N
You cannot rena
8/6/2019 Web&Walk t Mobile
14/24
11
p as follows:
ect one or more contacts in Local.
2. Dra
Note:
When you drag the selected contact(s), if you press and hold Ctrl, the contact(s)
can be copied to another group; otherwise, the contact(s) are moved to another
vigation tree.
Adding a Contact
You can add a contact from Local to another grou
1. Sel
g the selected contacts to another group.
group.
You can add a contact to a group as follows:
1.Select a group in the na
2. Click ; or right-click in the contact list and choose New Contact.
the contact list of a group.
ect a contact to remove.
3. Rig oup.
ote:emoved from the group but not deleted.
le
ht-click a group in the navigation tree and choose Delete Group.
2. Clic
Note:
When you delete a group, contacts in the group cannot be deleted. They are still in
the phonebook ofLocal or in other groups.
3. Enter the information.
Removing a Contact
1. Display
2. Sel
ht-click the selected contact and choose Remove from gr
NThe contact is r
De ting a Group
1. Rig
kOK.
Phonebook Management in the SIM Card
You can save the contacts in the SIM card.
The operations on the contacts in the SIM card are similar to those on the contacts in Local.
For details, refer to "Phonebook Management in Local" on page 9.
8/6/2019 Web&Walk t Mobile
15/24
12
Note:
ice provider for whether a SIM card is needed.
The SIM card is supplied by the service provider. For details, contact your
service provider.
Contact your serv
Import/Export
You can
contact
export the contacts from Local or the SIM card to a *.csv file, and import the
s
Note:
nebook, select one or more contacts. Drag the contact(s) to the SIM
card in the navigation tree. Then the contact(s) are exported to the phonebook ofthe SIM card.
from a *.csv file to phonebook in Local or the SIM card.
In the local pho
Importing ntacts
port the contacts fr ook or the SIM card.
Co
You can im om a *.csv file to the local phoneb
1. Click to display the Phonebook interface.2. ClickLocal or SIM in the navigation tree.
the contact list and choose Import.3. Right-click
4. Choose a file to import. ClickOpen to display the FieldMapping interface.
to the corresponding field on the right respectively.
OK
Note:
ct
When you import contacts to the SIM card, if its capacity is full, the import
stops automatically. The content of the imported contacts is not affected.
5. Drag the value in the file
6. Click .
The maximum number of contacts that can be saved in the SIM card is subje
to the capacity of the SIM card.
8/6/2019 Web&Walk t Mobile
16/24
13
Exporting Contacts
You can export contacts from the local phonebook and the SIM card. The exported contacts
be saved in a *.csv file.
1. Clic
can only
k to display the Phonebook interface.
2. ClickLocal or SIM in the navigation tree.
3. Choose one of the following operations:
Choose one or more contacts and right-click to choose Export Selected Contacts.
Right-click the contact list and choose Export All Contacts.
4. Choose the path to save the contact(s).
5. Enter the file name and clickSave.
Note:
You can press and hold Shift or Ctrl, and click the selected contacts; or you canpress Ctrl + A to select all the contacts in the list.
8/6/2019 Web&Walk t Mobile
17/24
14
5and Information QuerySettings
Switching a Language
The webnwalk Manager provides several interface languages for you.
tware, you can choose Tools > Language to switch theDuring the running of the sof
languages.
PIN Operations
If a SIM
your car
card is used in your terminal, the Personal Identity Number (PIN) code protects
d from unauthorized use. You can modify the PIN code and enable/disable the PIN
verificat
Note:
K) code are provided along with your
ion.
The PIN code and PIN Unblocking Key (PUSIM card. For details, contact your service provider.
Enabling/Disabling the PIN Verification
Operations > Enable PIN Verification.
ble PIN Verification.
You can enable the PIN verification. If it is enabled, you need to verify the PIN code when
launching the webnwalk Manager again.
To enable: Choose Tools > PIN
T o disable: Choose Tools > PIN Operations > Disa
Modifying the PIN Code
1. Choose Tools > PIN Operations > Modify PIN.
e Modify PIN dialog box, enter the current PIN code and the new PIN code.
er the new PIN code again.
4. Clic
2. In th
3. Ent
kOK to complete the modification.
Note:
The PIN code should be a numeric string of 48 digits.
8/6/2019 Web&Walk t Mobile
18/24
15
Entering the PIN Code
When the PIN verification is enabled, you need to enter the correct PIN code to use the
related functions.
1. Afte
2. Ente3. Clic
Note:
If you enter wrong PIN codes for a preset number of times, the SIM card is locked
se it until you enter the PUK code. The webnwalk Manager
remaining number of attempts for entering the PIN code or the
network-
r the webnwalk Manager is launched, the Enter PIN dialog box is prompted.
r the correct PIN code.kOK to complete the verification.
and you cannot u
prompts you the
PUK code.
Unlocking the PIN
1. When the SIM card is locked, the Unlock PIN dialog box is displayed after you start
the webnwalk Manager.
2. Enter the correct PUK code.
3. Enter the new PIN code.
4. ClickOK to complete the modification.
Choosing a Device
The webnwalk Manager can support different terminal products.
When the webnwalk Manager is launched, it searches the matched terminal automatically.
connected terminals are displayed on the Choose
minal to run and clickOK.
r choose a
If two or more terminals are found, the
Device interface. You can choose a ter
If two or more supported terminals are connected with the PC, you can change o
device during the running of the webnwalk Manager.1. Choose Tools > Choose Device.
2. Select a device in the device list.
3. ClickOK to terminate the current terminal and switch to the selected one.
Viewing Diagnostics Information
Choose
and Net
Tools > Diagnostics to view information of the hardware, Terminal Management
work settings, such as APN(s), PS network attachment, PS network registration, CSnetwork e, PIN code
atus, phone number(s), card serial number, application port, firmware, hardware version,
ard name, serial number, IMEI number.
registration, signal strength, network selection mode, network nam
st
c
8/6/2019 Web&Walk t Mobile
19/24
16
ation is subject to the terminal that is used.
Note:
The diagnostic inform
Startup Settings
Yo can set the webnwalk Manager to launch automatically along with Windo
m mize the interface after the startup.
u ws and
ini
s:
Select Launch on Windows startup: The webnwalk Manager launches
s.rtup: The interface of the webnwalk Manager is
1. Choose Tools > Options.
.2. ClickGeneral in the navigation tree
3. You can choose the following option
automatically along with Window Select Minimize window on sta
automatically minimized after the webnwalk Manager is launched.
4. ClickOK to complete the settings.
Profile Management
You can display the Profile Management interface by one of the following options:
ose Tools > Options.th
Click th
:
pe is the 3G/ General Packet Radio Service (GPRS)
1. Cho2. In e navigation tree, clickProfile Management.
e Dial-Up tab to display the Dial-Up interface.
Note
If the current network ty
network, click the Dial-Up tab.
For details about setting the profile, contact your service provider.
Creating a Dial-up Profile
1. ClickNew to set the profile name, access number, user name, passwor
Name (APN) and APN status, and select a default device.
d, Access Point
information, authentication protocol, Domain Name
Internet Name Service (WINS).
-Up interface.
2. ClickAdvanced to set the IP
Server (DNS) and Windows
3. ClickOK to save the advanced settings and return to the Dial
4. ClickOK and the Prompt dialog box is displayed.
5. ClickYes to save the settings; or clickNo to cancel the settings.
8/6/2019 Web&Walk t Mobile
20/24
17
Editing a Dial-up Profile
1. In the Profile Name drop-down combo box, select a setting.
2. ClickEdit to modify the profile name, access number, user name, password, APN
ct a default device.
ation, authentication protocol, DNS and WINS.
-Up interface.
name and APN status, and sele
3. ClickAdvanced to set the IP inform
4. ClickOK to save the advanced settings and return to the Dial5. ClickOK and the Prompt dialog box is displayed.
6. ClickYes to save the settings; or clickNo to cancel the edits.
Deleting a Dial-up Profile
1. In the Profile Name drop-down combo box, select a setting.
x is displayed.
the deletion.
2. ClickDelete and the Prompt dialog bo
3. ClickYes to delete the setting; or clickNo to cancel
Importing a Dial-up Profile
1. ClickImport and the Import in
2. You can choose the following op
terface is displayed.
tions:
n clickOpen.
Select the 3G/GPRS network operator(s) in the list.
ClickBrowse and choose a *. proffile to import. The
3. In the Import interface, clickOK.
Exporting a Dial-up Profile
1. Clic
2. Sele rk operators and click OK.
. Select the path to save the file and enter the file name. Then clickSave.
e selected operator is exported to a *. proffile (a
Network Settings
kExport and the Export interface is displayed.
ct one or more netwo
3
Note:
The dial-up profile of th
configuration file).
To display the Network interface, you can do as follows:
1. Choose Tools > Options.
2. In the navigation tree, clickNetwork.
Selecting a Network TypeYou can select different network types to quickly search and access the network.
1. Click the Network Type tab.
8/6/2019 Web&Walk t Mobile
21/24
18
bo box, select the corresponding network type.
ttings.
2. In the Network Type drop-down com
3. In the Band down-drop list box, select the corresponding frequency band.
4. ClickApply.
5. ClickOK to save and enable the se
Selecting a Registration Mode
b.
r Manual search and register.
to search and register, the terminal product can automatically search
nd Register
and register.
Online Update
You can set the searching and registration mode after selecting the network type.
1. Click the Registration Mode ta
2. Select Auto search and register o
Auto Search and Register
When you select Au
and register to a supplied network.
Manual Search a
1. Select Manual search
2. ClickRefresh.
3. Select an operator name in the list.
4. ClickRegister.
The manager will prompt you to update when it detects thacan also Select Help > Online Update to update the manager manually and setting th
t there is an update version. Youe time
of checking the update version.
Up
pdate > Online update.
the available updates.
d ClickUpdate.
The system start downloading the selected update and prompt you to close thedownload has been finished.
e window.
dating the manager
1. Select Help > Online U
The system start checking the update version and lists all
2. Select one update from the update list an
Terminal Management when the
3. ClickOK to install it.
elcom4. Select I accept the agreement in the w
5. ClickNext to complete the installation.
Setting the Checking Time
1. Select Help > Online Update > Options.
2. You can choose the following options:
Select Check automatically every two weeks. Select Disable automatically check
3. ClickOK to complete.
8/6/2019 Web&Walk t Mobile
22/24
19
Optimization Settings
You can choose Tools > Optimization to start-up or close the Bytemobile Optimization
.
3. Drag the slider to set the resolution in the Image Quality setting interface.
4. ClickApply to complete the setting.
5. ClickOK to return to the main interface.
Client. To set the Optimization parameter, you can do as follows:
1. Choos ols > Options.e To2. In the navigation tree, clickOptimization
8/6/2019 Web&Walk t Mobile
23/24
20
6FAQs
h
2. online service. You can ask the local
ructions in "Internet Services" on Page 3.
ed. If the
leted
es.handling area, select Show
Why the phone number cannot be pasted?
A valid phone number can only contain "0123456789#*+". Confirm that no other character
is in the cut or copied text.
W at shall I do if I cannot access the Internet?
1. Check the network signal strength.
Check whether you have activated the wireless
network operator on how to activate it.
3. If the wireless online service is activated, check network settings according to the
inst
Why only part of the pasted content can be displayed during theedit?
When editing a message, at most 2048 English or Chinese characters can be enter
quantity of the pasted information exceeds the limit, the exceeding part will be de
automatically.
When a message is received, no prompt is displayed. Why?
You have not set the vision alert of messagChoose Tools > Options > Text Message. In the Text message
a notification when a new text arrives.
8/6/2019 Web&Walk t Mobile
24/24
7ms and Abbreviations
umerics
he Third Generation
N ccess Point Name
S omain Name Server
PRS eneral Packet Radio ServiceM lobal System for Mobile communications
IN ersonal Identification Number
K IN Unblocking Key
ubscriber Identity Module
W
WINS Windows Internet Name Service
Acrony
N
3G T
A
AP A
D
DN D
G
G GGS G
P
P P
PU P
S
SIM S