transcript
1DOWNSTREAM PRODUCTS
SINOPEC International
Go back
Downstream Products
SINOPEC International
Go back
Standard: ASME/ API530/API560
900kt/a Ethylene Cracking unit in Thailand
SINOPEC International
Go back
HYCO Reformer: 700,000.00T/Y
Standard: ASME/ API530/API560
SINOPEC International
Go back
Type:
Gasoline Hydro treating Heater
Hydro cracking Heater
Catalytic cracking Heater
Standard: ASME/ API560,API530
Certificate: ASME, PED
2.8MT/Y Diesel oil Hydro treating Heater in SINOPEC-FUJIAN
SINOPEC International
Go back
Type:
Gasoline Hydro treating Heater
Hydro cracking Heater
Catalytic cracking Heater
Standard: ASME/ API560,API530
Certificate: ASME, PED
SINOPEC International
Go back
2. Tower
General Description:
The overall delivery, logistics advantages
Petrochemical plants and chemical installations units
SINOPEC International
Go back
– Features:
SINOPEC International
Go back
– Features:
DimensionsDiameter- 9.6m
Number: 6
SINOPEC International
Go back
– Features:
SINOPEC International
Go back
– Features:
SINOPEC International
Go back
SINOPEC International
Go back
Number: 2
SINOPEC International
Go back
End
Design as per specific customer requirements, and international
codes and standards.
Quality assurance: U ,U2 stamps by ASME.
The quality systems are covered under ISO 9001 ,ISO 14000…
The quality systems are backed by the latest facilities for
radiography, including 12 MeV linear accelerator ,ultrasonic
(including TOFD ), maganetic particle & liquid penetrant
examination.
The reactors cover the guarantee against defects of mechanical
design, fabrication, inspection and testing.
Supply these materials as per ASME/ASTM.
In case of oversized of reactors, we can also complete at
Site.
SINOPEC International
Go back
SINOPEC International
Go back
3.2 Reactor-Forging
SINOPEC International
Go back
3.3 Reactor-Plate
– Features:
– Features:
– Features:
SINOPEC International
Go back
Newly Process Technology of Basell Spherizone 450KTA PP Plant
SINOPEC International
Go back
3.7 PP Reactor
Key Reactor for 300 KTA PP Plant with DOW Process Technology
SINOPEC International
Go back
– Features:
SINOPEC International
Go back
Diameter: 6760 mm
Licensor: SD, DOW, SHELL
SINOPEC International
Go back
– Features:
– Features:
Diameter: 9300 mm
Length: 36.2 m
Weight: 355 ton
Process Capacity: 1500 KTA
Pressure: 4.86 MPa
End
U bundle: AKU,BKU
Type:
Screw Lock Ring Heat Exchanger;
Various Enhanced Tube Heat Exchanger
Codes & Standards: ASME Section VIII Div.1 PED; AS1210; API;
RINA; NR-13
MaterialsCS / SS / Duplex / Ni / Cu / Ti / Zr / Ta
DimensionsD-6m/ L-22m /s= 20000m2
*
– Features:
Any case when two media cannot be mixed.
*
– Features:
Bearing higher pressure
*
– Features:
Compact design with large heat transfer area
Anti-fouling with self-cleaning
*
– Features:
Pressure drop reduced by 20%
Dead zone eliminated and fouling is reduced
Flow-induced vibration is prevented
Gas-gas heat exchangers, gas-liquid heat exchangers, compressor
aftercoolers, reboilers and condensers, etc.
*
– Features:
Main Technical Advantages: mainly applied in PP/HDPE/LDPE/LLDPE
plants; utilizing the annealed stainless steel tubes and with the
fluidized tube end of heat exchangers that are specially designed
and machined to ensure the powder medium not to be accumulated or
scaled or deposited on the inner wall during the transmission and
reaction process.
Single Line Processing Capacity: 450 KTPY
Main Materials: LTCS, SS
Maximum Operation Temperature: -46
Maximum Operation Pressure: 6.4Mpa
Main Licenser: SEI, BASELL, DOW, TECHNIP, JBB
*
– Features:
Pressure: up to 20MPa
– Features:
Corrugation can compensate temperature difference stress
Intensified turbulent flow reduces fouling remarkably
Application Fields:
Liquid-liquid HE,
Liquid-gas HE,
Gas-gas HE,
– Features:
Intensified turbulent flow reduces fouling remarkably
Shallower and wider grooves on the external walls are better for
draining of condensate and make liquid films thinner
Application Fields:
Liquid-liquid HE,
Liquid-gas HE,
Gas-gas HE,
SINOPEC International
Go back
– Features:
Boiling heat transfer coefficient 2-4.8 times more than smooth
tubes
The wall superheat is remarkably lower
Self-cleaning reduces fouling
Lower operation cost
– Features:
End
Max. size: (Length) 15m x (Width) 6m
Max. weight : 28 ton
Standard: ASME/ API661
Max. design temperatures: 650oC.
SINOPEC International
Go back
A. Induced Draft Unit
The induced draft unit gives a steady and endurable thermal
performance due to the protection of the finned surface against
wind, rain and snow by the plenum chamber. The induced draft also
ensures better air distribution, less hot air recirculation, less
fouling and lower noise levels at grade.
4.11 Heat Exchanger - Air Cooler
SINOPEC International
Go back
B. Forced Draft Unit
The forced draft unit allows an easy access for maintenance to the
bundles. Furthermore, the fans remain in the cold ambient air
temperature and allow high process inlet temperature as
well as with a long life.
4.11 Heat Exchanger - Air Cooler
SINOPEC International
Go back
C. Humidified Air Cooler
The combination of air cooler and humidification section is a good
solution in some dry areas and hot climates. The ambient air is
cooled by direct contact with water in the humidification section,
which further reduces the temperature of process streams and
improves the heat exchange for a fixed set of process
temperature.
4.11 Heat Exchanger - Air Cooler
SINOPEC International
Go back
D. Recirculation Unit
In very cold climates (RUSSIA, CANADA and ALASKA of USA) and also
for special process, it is necessary to provide hot air
recirculation to prevent freezing or congealing. Different
types
of hot air recirculation are possible thanks to various combination
of louvers, steam coils, auto variable fans and / or variable
speed.
4.11 Heat Exchanger - Air Cooler
SINOPEC International
Go back
E. Air Cooled Vacuum Steam Condenser
This anti-freeze steam condenser is supported on an A-frame steel
structure equipped with a vacuum package system including tanks,
pumps and control devices.
4.11 Heat Exchanger - Air Cooler
End
Codes & Standards
ASME PEDSAMSUNGS&WTECHNIPTEMAUHDEUOPBASF
BAYERBPCTCIFOSTERWEELERHITACHIKTI
*
– Features:
Dimension: 4100*30000mm
*
– Features:
– Features:
– Features:
– Features:
– Features:
– Features:
– Features:
*
– Features:
Application Field: PTA
– Features:
*
5.11 Non-ferrous Equipment - Preliminary Cleaning Column
*
– Features:
*
5.15 Non-ferrous Equipment - Fluidized Bed Reactor
*
– Features:
Application Field: Chemical Project
Application Field: Chemical Project
SINOPEC International
Go back
Flow range: 20-8500m3/min
Material: Carbon steel/stainless steel
Certificate: API
SINOPEC International
Go back
Flow range: 20-4500m3/min
Material: stainless steel forging
Certificate: API
SINOPEC International
Go back
Flow range: 17000-35000m3/min
Material: stainless steel(forging)
Certificate: API
SINOPEC International
Go back
Flow range: 3500-165000m3/h
Material: carbon steel
Certificate: API
SINOPEC International
Go back
Flow range: 400-16000m3/min
catalytic crack gas compression in large oil refinery etc.
Certificate: API
SINOPEC International
Go back
Flow range: 45-3500m3/min
catalytic crack gas blower etc.
SINOPEC International
Go back
Type: GM25-GM75
SINOPEC International
Go back
Intelligent Instruments
SINOPEC International
Go back
7.1 Distributed Control System (DCS)
Brings powerful operational functions that are highly reliable for
process control, friendly openness for third-party integration, and
maximum efficiency in project commissioning whether it is small,
medium, large, even extra-large. Has been applied in Petrochemical,
Chemical, Oil & Gas, Power, Cement, Metal, Pulp & Paper and
Food & Beverage industries.
CE certified
Support on-line upgrading
7.2 Advanced Process Control (APC)
Gives full consideration of the complex nature of the real process
control. APC-Suite helps realize optimal production and enhance the
bottom line of your plant.
Software Package
APC-PCalc: On-line process calculation
APC-PFC: Predictive fction control
ESP-iSYS-A: Core real-time database
7.3 Ethernet for Plant Automation (EPA)
Developed the world's first EPA protocol chip accepted as IEC/PAS
62409. EPA is an advanced real-time Ethernet-based field-bus for
communication among field equipments.
Advanced real-time Ethernet-based field-bus
7.4 Intelligent Instruments
Developed the world’s first paperless recorder. Pioneers in this
sector and brings the latest technologies to intelligent
instruments for industrial use
End
R5000 Paperless Recorder
RS-232C/RS-485 interface
Ramping and stepping the output
Storage and recall of 10 setups
Auto flash terminals
SINOPEC International
Go back
- Capacity120,000 (m3/h)
- Head~ 3,500 (m)
- Pressure 35 (MPa)
Product Summarize:
Design and manufacture in accordance with API610 standard with high
reliability and performance, wide application of petrochemical
industry, various structural transformations vary form different
working conditions, as EAP9 typical structure, EAPK open-impeller
structure, EPAD lightweight structure, EPAG high-pressure
structure, EAPX low flow rate structure.
Design Parameter:
SINOPEC International
Go back
Product Summarize:
Double suction impeller for one-stage structure; double suction
impeller for the first stage and single suction impeller for second
stage of dual-stage structure, hydraulic utilize advanced design
means such as 3D modeling, DFD flow field analysis, etc based on
excellent hydraulic model at home and abroad, wide scale of flow
and head, high efficiency, good performance concerned
anti-cavitation, is new generation energy-efficient product.
Design Parameter:
SINOPEC International
Go back
Product Summarize:
Apply to rigorous and heavy industry working conditions with
advantages such as safe and reliable structure, stable operation,
convenient maintenance, long service lift, etc.
Design Parameter:
SINOPEC International
Go back
Product Summarize:
Casing of this serial is volute structure, centerline supporting,
symmetrical arrangement of impellers, self balance of axial loads
without complex balancing device such as balancing plate or balance
drum; suction and discharge are arranged under the casing,
dismounting or installation without dismantling inlet/outlet
pipelines, is applicable to high-temperature and high-pressure
conditions.
Design Parameter:
SINOPEC International
Go back
Product Summarize:
SCSG is single-casing ring-section horizontal multistage pump, the
external pressure parts use forgoing or casting, balance axial
loads by combined effect with drum-plate-drum, effective control of
“flash evaporation” when operation, realize axial force dynamic
balance, bearings bear few axial loads.
DCSG is double-casing ring-section horizontal multistage pump, the
external pressure parts use forgoing or casting, the core is
ring-section which can be pulled out entire, dismounting or
installation without dismantling inlet/outlet pipelines, is
applicable to high-temperature and high-pressure conditions.
Design Parameter:
SCSG DCSG
Applicable codes and standardsAPI610 10th Edition
SINOPEC International
Go back
Product Summarize:
SCSZ is single-casing ring-section horizontal multistage pump, the
external pressure parts use forgoing or casting, symmetrical
arrangement of impellers, self balance of axial loads without
complex balancing device, is applicable to transporting medium
containing certain particles.
DCSZ is double-casing ring-section horizontal multistage pump, he
external pressure parts use forgoing or casting, the core is
ring-section which can be pulled out entire, dismounting or
installation without dismantling inlet/outlet pipelines, is
applicable to high-temperature and high-pressure conditions:
Design Parameter:
SCSZ DCSZ
Applicable codes and standards: API610 10th Edition
SINOPEC International
Go back
Product Summarize:
DCSK is double-casing structure, the external pressure parts use
forgoing; the core is axially split, symmetrical arrangement of
impellers, can be pulled out entire, dismounting or installation
without dismantling inlet/outlet pipelines, is applicable to
high-temperature and high-pressure conditions:
Design Parameter:
SINOPEC International
Go back
Product Summarize:
Design and manufacture in accordance with API610 0th Edition,
thorough consideration and design concerned structure as
supporting, cooling, maintenance, etc, can be equipped with kinds
of auxiliary and monitoring system to achieve higher safety and
reliability. Various structural transformations vary form different
working conditions, as LDB-A multistage radial diffuser structure,
LDB-B multistage blower structure, LDB-C one- and dual-stage large
flow mixed-flow structure.
Design Parameter:
Head~1000m