Post on 24-May-2015
transcript
Submersible heavy-duty pumps for construction, tunnelling, mining, quarries and other demanding industries
Drainage pumps: Minex Minette Minor Major Master MatadorMaxi MagnumMega
Sludge pumps: Salvador Senior Sandy
60 Hz
Spend less per gpm pumped
Just like our pumps spend most of their life hidden below the water surface, the greater part of total pumping cost is usually also hidden. In most cases, installation, operation and servicing costs easily outweigh the cost of acquisition. Let our pumps drain water, not your wallet.
PumpUnique features
OperationLasting performance
InstallingPlug and pump
Easy maintenanceService one service all
CheckingAvoid costly repairs
Translating user requirements into product features
After some 50 years of designing and manufacturing submersible electrical dewatering pumps and listening to customers, Grindex offers a drainage and sludge pump family designed to dramatically reduce operational costs.
The pumps in the range have an output of 1.3 - 140 HP and cover almost any application within building and construction, mining, quarries and tunneling as well as municipal and other demanding industries.
Grindex – Trouble-free dewatering
They offer all the benefits you have come to expect from Grindex pumps:
• Reliabilitythanksto: - Air valve that cools the pump should it run dry. - SMARTmotorprotectionsystem,protectsthe pump from damage caused by different power failures.
• Allinthehead: - Built-in start equipment in almost all pumps, no need for external start equipment.
On top of that, we have added some new features:
• Newhydraulicdesign: - Several solutions that minimize wear, makes the pumps at least three times more wear resistant.
• Fewercomponents: - Makes inspection and service faster, easier and less expensive.
• Ergonomicdesign: - Simplifies the pump handling.
Wear Protector system Provides better wear resistance
Air valve Cools the pump should it run dry
Easy to serviceLasting performance
Built-in start equipmentPlug and pump
MInEx – MATADOr1 Air valve
Cools the pump should it run dry2 SMArT motor protection
Protects the pump from damage caused by different power failures
3 Inspection cover Foreasyinspectionofelectricalcomponents
4 Outer casing in corrugated stainless steel Handles rough treatment
5 External oil plug Easiertocheckandchangeoil
6 Inspection chamber Provides early indication of seal problem
7 Cartridge seal Pre-assembled, faster and easier to mount
8 Seal Saver system Reducessealwear
9 Single adjustment screw Easytoadjusttheimpellerforoptimal performance
10 Wear Protector system Provides better wear resistance
11 rubber shock absorbers Gives superior impact protection
This is what makes our drainage pumps unique
1
4
9
6
7
2
3
5
11
8
10
SAlvADOr – SAnDy1 Air valve
Cools the pump should it run dry 2 SMArT motor protection
Protects the pump from damage caused by different power failures
3 Inspection cover Foreasyinspectionofelectricalcomponents
4 Outer casing in corrugated stainless steel Can handle rough treatment
5 External oil plug Easiertocheckandchangeoil
6 Inspection chamber Provides early indication of seal problem
7 Cartridge seal Pre-assembled, faster and easier to mount
8 vortex impeller Clog resistant
9 Polyurethane lined pump housing Provides better wear resistance
This is what makes our sludge pumps unique
2
5
8
9
1
4
6
7
3
DrAInAGE PUMPS: MInEx – MInOr
MInEx
MInETTE
MInOr
Technical data Minex lite 1~ 3~
Discharge connection 2” 2” 2”
Ratedoutput 1.3 HP 2.0 HP 1.9 HP
Max power consumption 1.3 kW 1.8 kW 1.8 kW
Shaft speed 3400RPM 3460RPM 3335RPM
Ratedcurrentat115V 11 A - -
Ratedcurrentat230V 5.6 A 8.2 A 5.2 A
Ratedcurrentat460V - - 2.6 A
Ratedcurrentat575V - - 2.1 A
Technical data 1~ 3~
Discharge connection 3” 3”
Ratedoutput 2.4 HP 3.5 HP
Max power consumption 2.2 kW 3.1 kW
Shaft speed 3420RPM 3410RPM
Ratedcurrentat230V 9.9 A 9.5 A
Ratedcurrentat460V - 4.7 A
Ratedcurrentat575V - 3.6 A
Technical data n H
Discharge connection 4” 3”
Ratedoutput 6.0 HP 6.0 HP
Max power consumption 5.2 kW 5.2 kW
Shaft speed 3500RPM 3500RPM
Ratedcurrentat460V 7.3 A 7.3 A
Ratedcurrentat575V 5.8 A 5.8 A
0 50 100 150 200
0 2 4 6 8 10 12
(US gpm)
(l/s)
0
10
20
30
40
50
0
5
10
15
60(ft) H
18(m)
1~
3~
Lite
Q
0 50 100 150 200 250 300
0 5 10 15 19
(US gpm)
(l/s)
0
10
20
30
40
50
60
70
0
5
10
15
20
80(ft) H
24(m)
1~ 3~
Q
0 100 200 300 400 500 600
0 5 10 15 20 25 30 35 38
(US gpm)
(l/s)
0
20
40
60
80
100
120
140
0
10
20
30
40
160(ft) H
49(m)
N
H
Q
1~:6
10m
m(
24”)
Li
te,3
~:5
70m
m(
22.4
”)
∅ 195 mm (7¾”)
1~:24kg(54lbs)Lite,3~:21kg(46lbs)
Maximumsolidsize:∅7,5mm(0.3”)
667
mm
(26
¼”)
∅ 240 mm (9½”)
1~:30kg(67lbs)3~:32kg(71lbs)
Maximum solidsize:∅9mm(0.35”)
52kg(115lbs)
Maximum solidsize: ∅10mm(0.4”)
793
mm
(31
.2”)
∅ 286 mm (11.3”)
DrAInAGE PUMPS: MAjOr – MATADOr
MAjOr
MASTEr
MATADOr
Technical data n H
Discharge connection 4” 3”
Ratedoutput 8.9 HP 8.9 HP
Max power consumption 7.7 kW 7.7 kW
Shaft speed 3500RPM 3500RPM
Ratedcurrentat460V 11 A 11 A
Ratedcurrentat575V 8.5 A 8.5 A
Technical data n H
Discharge connection 6” 4”
Ratedoutput 27 HP 27 HP
Max power consumption 22 kW 22 kW
Shaft speed 3500RPM 3500RPM
Ratedcurrentat460V 31 A 31 A
Ratedcurrentat575V 25 A 25 A
0 100 200 300 400 500 600
0 10 20 30 40 44
(US gpm)
(l/s)
0
50
100
150
0
10
20
30
40
50
60 200(ft) H(m)
H
N
Q
0 200 400 600 800 1000
0 10 20 30 40 50 60
(US gpm)
(l/s)
0
50
100
150
200
250
0
20
40
60
80
300(ft) H
91(m)
H
N
SH
Q
0 200 400 600 800 1000 1200 1400
0 20 40 60 80 100
(US gpm)
(l/s)
0
50
100
150
200
0
10
20
30
40
50
60
70250(ft) H
76(m)
H
N
Q
Maximumsolidsize:∅7,5mm(0.3”)
Maximum solidsize:∅9mm(0.35”)
793
mm
(31
.2”)
∅ 286 mm (11.3”)
54kg(119lbs)
Maximum solidsize:∅10mm(0.4”)
N&
H:8
32m
m(
32.8
”),S
H:8
87m
m(
35”)
N&H:80kg(176lbs)SH:98kg(217lbs)
Maximum solidsize:∅10mm(0.4”)
∅ 346 mm (133/4”)
954
mm
(37
.6”)
∅ 395mm(15.5”)
Maximum solidsize:∅12mm(0.47”)
143kg(315lbs)
Technical data n H SH
Discharge connection 6” 4” 3"
Ratedoutput 15 HP 15 HP 15 HP
Max power consumption 13 kW 13 kW 13 kW
Shaft speed 3465RPM 3465RPM 3465RPM
Ratedcurrentat460V 18 A 18 A 18 A
Ratedcurrentat575V 14 A 14 A 14 A
DrAInAGE PUMPS: MAxI - MEGA
MEGA
MAGnUM
MAxI
Technical data l n H
Discharge connection 8” 8” 4”
Ratedoutput 50 HP 58 HP 58 HP
Max power consumption 42 kW 48 kW 48 kW
Shaft speed 1765RPM 3545RPM 3545RPM
Ratedcurrentat460V 64 A 65 A 65 A
Ratedcurrentat575V 48 A 52 A 52 A
Technical data l n H
Discharge connection 10” 8” 6”
Ratedoutput 85 HP 85 HP 85 HP
Max power consumption 73 kW 73 kW 75 kW
Shaft speed 1770RPM 1770RPM 3540RPM
Ratedcurrentat460V 107 A 107 A 100 A
Ratedcurrentat575V 85 A 85 A 81 A
0 500 1000 1500 2000 2500 3000 3500
0 50 100 150 200 250
(US gpm)
(l/s)
0
50
100
150
200
250
300
0
20
40
60
80
100350(ft) H(m)
H
L
N
Q
0 1000 2000 3000 4000 5000
0 50 100 150 200 250 300 350
(US gpm)
(l/s)
0
50
100
150
200
250
300
350
0
20
40
60
80
100
120 400(ft) H(m)
H
L
N
Q
0 500 1000 1500 2000 2500
0 20 40 60 80 100 120 140
(US gpm)
(l/s)
0
100
200
300
400
500
600
700
0
50
100
150
200
800(ft) H
244(m)
H
N
Q
1345
mm
(50
”)14
75m
m(
59”)
285kg(633lbs)
540kg(1190lbs)
∅ 510mm(20”)
∅ 750mm(30”)
Maximum solidsize:∅12mm(0.47”)
Maximum solidsize:∅12mm(0.48”)
Technical data n H
Discharge connection 6”(DN150) 4”(DN100)
Ratedoutput 140 HP 140 HP
Max power consumption 110 kW 110 kW
Shaft speed 3560RPM 3560RPM
Ratedcurrentat460V 148 A 148 A
Ratedcurrentat575V 118 A 118 A
1245
mm
(49
”)
∅ 610 mm (24”)
680 mm (26.8”)
10x10 mm(0.4” x 0.4”)
1180 mm (46.5")
∅ 6
10 m
m
(24”
)
770
mm
(30
.3")
10x10 mm(0.4” x 0.4”)
N:900kg (1984lbs)
H:985kg (2167lbs)
n
H
SAnDy
SEnIOr
SAlvADOr
SlUDGE PUMPS: SAlvADOr – SAnDy
Technical data 1~ 3~
Discharge connection 3” 3”
Ratedoutput 2.4 HP 3.5 HP
Max power consumption 2.2 kW 3.1 kW
Shaft speed 3420RPM 3410RPM
Ratedcurrentat230V 9.9 A 9.5 A
Ratedcurrentat460V - 4.7 A
Ratedcurrentat575V - 3.6 A
Technical data
Discharge connection 4”
Ratedoutput 6.0 HP
Max power consumption 5.7 kW
Shaft speed 1700RPM
Ratedcurrentat460V 8.6 A
Ratedcurrentat575V 6.9 A
Technical data n H
Discharge connection 3” 3”
Ratedoutput 8.9 HP 8.9 HP
Max power consumption 7.7 kW 7.7 kW
Shaft speed 3500RPM 3500RPM
Ratedcurrentat460V 11 A 11 A
Ratedcurrentat575V 8.5 A 8.5 A
0 50 100 150 200 250
0 2 4 6 8 10 12 14 16
(US gpm)
(l/s)
0
10
20
30
40
50
0
5
10
15
60(ft) H
18(m)
1~
3~
Q
0 100 200 300 400 500
0 5 10 15 20 25 30
(US gpm)
(l/s)
0
5
10
15
20
25
30
0
2
4
6
8
1035
(ft) H(m)
Q
0 50 100 150 200 250 300
0 5 10 15 19
(US gpm)
(l/s)
0
20
40
60
80
100
120
0
5
10
15
20
25
30
35
40140(ft) H(m)
H
N
Q
766
mm
(30
.1”)
879
mm
(34
.6”)
879
mm
(34
.6”)
34kg(75lbs)
57kg(126lbs)
57kg(126lbs)
375mm(14.8”)
480mm(18.9”)
480mm(18.9”)
Throughlet:∅50mm(2”)
Throughlet:∅ 80mm(3,2”)
Throughlet:N:∅46mm(1,8”)H:∅32mm(1,3”)
Technical Data
lower mechanical seal
Cartridge type • • • • • • • • •
Tungsten carbide - tungsten carbide • • • • • • • • • • • •
Upper mechanical seal
Cartridge type • • • • • • • • •
Tungsten carbide - ceramic • • • • • • • •
Tungsten carbide - tungsten carbide • • • •
Min
ex
Min
ette
Min
or
Maj
or
Mas
ter
Mat
ador
Max
i
Mag
num
Meg
a
Salv
ador
Seni
or
Sand
y
Material
Outer casing
Stainless steel • • • • • • • • • • •
Cast iron •
Motor shaft
Stainless steel • • • • • • • • • • • •
Impeller
Hard IronTM • • • • • • • • • • • •
Suction cover
Hard IronTM 3~ • • • •
lower diffuser
Nitrilerubber • 1~ • • •
Polyurethane • •
Diffuser ring
Nitrilerubber • • • • • • • •
Polyurethane • •
Pump housing
Polyurethane • • •
Screws and nuts
Stainless steel • • • • • • • • • • • •
O-rings
Nitrilerubber • • • • • • • • • • • •
Other castings
Aluminium • • • • • • • • • • •
Cast iron •
Accessories
Zinc anodes • • • • • • • • • • • •
Floatswitch 1~ 1~ 1~
Low suction collar • • • •
Tandem connection • • • • • •
limitations
pH of the liquid 5-8 6-13 5-8
Max. submersion 66ft(20m) 66ft(20m)
Max. liquid temperature 104°F(40°C)
Max. liquid density 68lbs/ft3(1100kg/m3)
Stator housing
Aluminium • • • • • • • • • •
Cast iron • •
• Standard • On requestSpecifications can be changed without notice.
Drainage pumps Sludge pumps
246 ft (75m)
Grindexpumpsaredesignedforcontinuous,unattendedoperation.For50years,theyhaveproven theirreliableanddependableperformanceinawiderangeofchallengingapplicationsworldwide:
• Buildingandconstruction
• Mining
• Tunneling
• Quarries
• Industries
• Powerplants
• Drydock/offshore
• Steelmills
• Undergroundutilities
• Rental
• Floodrelief
• Localandnationalgovernment
• Agriculture
Whatever your pumping demands are, Grindex has the solution
Mining andtunneling
Building and construction
Quarries and other demanding industries
rental
Forsome50years,Grindexhasspecializedindesigningandmanufacturing electrical submersible pumps for professionals. Durable and dependable, they are used in the most demanding and specialized applications worldwide. We have delivered over 300,000 pumps in more than 100 countries.
We offer pumps for almost any application. Our range includes drainage pumps, sludge pumps, slurry pumps and stainless steel pumps.
When you are running a Grindex pump, you can rest assured that a dedicated team is watching your back. Our experts are always there to see to your every need. Through our global network of sales and service centers, we provide the best level of support possible — day and night, seven days a week. It’s all part of the service.
Formoreinformation,pleasevisit www.grindex.com/us
Grindex Pumps • 18524 81st Avenue • Tinley Park • IL 60487 •Ph:708781-2135•Fax:708532-8767•e-mail:info.us@grindex.com
9005
313
USA
60
Hz. 2
011.
05.
The Grindex team