Page 1 2018 2B Distributor & End User Terms & Conditions IDX INCORPORATED 1812 Lorene St El Dorado, Arkansas 71730 870-862-2051 800-643-1109 FAX# 870-862-3472 Web Site www.idxinc.com Email [email protected]TERMS & CONDITIONS: Prices quoted are F.O.B. El Dorado, AR and are subject to change without notice. SHIPPING: Orders received by noon will be shipped (if in stock) the following day, except next day or 2 day shipments. DROP SHIPMENTS & SPECIAL HANDLING FEES APPLY TO ALL NON-STOCKING DISTRIBUTORS: Drop shipments will be charged a $10.00 special handling fee per shipment. Same day, next day, or international shipments requests will be charged a $25.00 special handling fee per shipment. ***Minimum Billing not including shipping is $25.00 per invoice.*** PAYMENT TERMS: Open account terms are granted to IDX Stocking distributors & OEM with established credit. If credit is not established, we accept VISA, Master Card, American Express, Discover Card, or Prepay check, wire transfer or authorized COD shipment. Include sufficient funds on check. Open account terms will be terminated in the event of consistent past due invoices or insufficient funds on check. IDX does not setup open accounts outside the continental United States. Terms are credit card or wire transfer. All “Custom / specials Parts, X-Mark Site Specific Tokens, Custom Wickets Cards, Credit Card, ALL Equipment / Systems and KIOSK orders” require a deposit of 50% with order and balance upon shipment. LEAD TIME: Standard lead-time for all products in the IDX Price List, unless otherwise noted, is 3 to 4 weeks ARO. MINIMUN BILLING NOT INCLUDING SHIPPING IS $25.00 PER INVOICE. PRICING: Distributors should not advertise below 15% off the MSRP - Manufactures Suggested Selling Price. RETURNS: A Return Material Authorization (RMA) number must be issued by IDX prior to the return of any goods. That number must be clearly marked on the outside of the box of returned merchandise. “Specials” may not be returned for credit. In order to be given the highest possible credit on returned goods, the original IDX invoice number must be supplied. All merchandise must be returned within 30 days of original IDX invoice date to receive maximum credit. A restocking fee of not less than 30% plus will apply if less than 6 months old and has not been installed: a 50% applies if over 6 months old. “No credit can be given if more than {12 months old}” “No credit can be given on Specials or if Installed or Used” WARRANTY: IDX products, except for certain accessories and components, are warranted against defective materials and workmanship for One or Two years (depended on model number) from the date of manufacture. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows to be defective, IDX will be repaired or replaced without charge, FOB factory. IDX DOES NOT assume any liability for damages during shipping. IDX DOES NOT warranty products manufactured by someone other than IDX or if there has attempted to repair or have been modified or altered from the original manufactured specifications by someone else. REPAIRS: IDX repairs 92% of all products that have been manufactured by IDX. IDX prefers that warranty repairs go through the Authorized IDX Distributor or OEM, since some OEM’S offer an extended warranty. The factory, IDX INC, can handle non- warranty repairs direct, a Return Material Authorization (RMA) number needs to be issued by IDX prior to the return of any goods to be repaired. With the RMA# IDX can obtain the correct return shipping information via FedEx or UPS and contact information. TERMS for repairs are: Credit Card Only- NO COD’s Credit Card number is requested at time of issuing RMA#. CANCELLATION: On Blanket orders, IDX reserves the right to manufacture all parts in advance for quantity specified on order. In the event of cancellation or change of specification, the customer will be held responsible for the cost involved. SPECIAL ORDER OR MODIFIED PRODUCTS ARE NOT CANCELABLE. BLANKET ORDER POLICY: Blanket orders are designed to help our customers to obtain minimum quantity discount and better deliveries. Such an order will be accepted, subject to the following terms: 1. Total value shall be for a minimum of $5000.00. 2. Products and Groups cannot be combined. 3. Scheduled shipments on blanket orders may be scheduled up to 12 months with 5 scheduled shipments. One re- scheduling is permitted during the life of the order, providing written notice is given to IDX not less than 30 days prior to delivery. 4. The total quantity shall be released within one year of date of order. An invoice will be issued to cover the difference of blanket quantity discount, if the total order is not released for shipment within one year. 5. Special items shall not be grouped with standard items, regardless of any similarity. **PRICING SUBJECT TO CHANGE PER MARKET CONDITIONS**
Transcript
Page 1
2018 2B
Distributor & End User Terms & Conditions IDX INCORPORATED
TERMS & CONDITIONS: Prices quoted are F.O.B. El Dorado, AR and are subject to change without notice.
SHIPPING: Orders received by noon will be shipped (if in stock) the following day, except next day or 2 day shipments.
DROP SHIPMENTS & SPECIAL HANDLING FEES APPLY TO ALL NON-STOCKING DISTRIBUTORS: Drop shipments will be charged a $10.00 special handling fee per shipment. Same day, next day, or international shipments requests will be charged a $25.00 special handling fee per shipment. ***Minimum Billing not including shipping is $25.00 per invoice.***
PAYMENT TERMS: Open account terms are granted to IDX Stocking distributors & OEM with established credit. If credit is not established, we accept VISA, Master Card, American Express, Discover Card, or Prepay check, wire transfer or authorized COD shipment. Include sufficient funds on check. Open account terms will be terminated in the event of consistent past due invoices or insufficient funds on check. IDX does not setup open accounts outside the continental United States. Terms are credit card or wire transfer. All “Custom / specials Parts, X-Mark Site Specific Tokens, Custom Wickets Cards, Credit Card, ALL Equipment / Systems and KIOSK orders” require a deposit of 50% with order and balance upon shipment.
LEAD TIME: Standard lead-time for all products in the IDX Price List, unless otherwise noted, is 3 to 4 weeks ARO.
MINIMUN BILLING NOT INCLUDING SHIPPING IS $25.00 PER INVOICE.
PRICING: Distributors should not advertise below 15% off the MSRP - Manufactures Suggested Selling Price.
RETURNS: A Return Material Authorization (RMA) number must be issued by IDX prior to the return of any goods. That number must be clearly marked on the outside of the box of returned merchandise. “Specials” may not be returned for credit. In order to be given the highest possible credit on returned goods, the original IDX invoice number must be supplied. All merchandise must be returned within 30 days of original IDX invoice date to receive maximum credit. A restocking fee of not less than 30% plus will apply if less than 6 months old and has not been installed: a 50% applies if over 6 months old. “No credit can be given if more than {12 months old}” “No credit can be given on Specials or if Installed or Used” WARRANTY: IDX products, except for certain accessories and components, are warranted against defective materials and workmanship for One or Two years (depended on model number) from the date of manufacture. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows to be defective, IDX will be repaired or replaced without charge, FOB factory. IDX DOES NOT assume any liability for damages during shipping. IDX DOES NOT warranty products manufactured by someone other than IDX or if there has attempted to repair or have been modified or altered from the original manufactured specifications by someone else.
REPAIRS: IDX repairs 92% of all products that have been manufactured by IDX. IDX prefers that warranty repairs go through the Authorized IDX Distributor or OEM, since some OEM’S offer an extended warranty. The factory, IDX INC, can handle non-warranty repairs direct, a Return Material Authorization (RMA) number needs to be issued by IDX prior to the return of any goods to be repaired. With the RMA# IDX can obtain the correct return shipping information via FedEx or UPS and contact information. TERMS for repairs are: Credit Card Only- NO COD’s Credit Card number is requested at time of issuing RMA#.
CANCELLATION: On Blanket orders, IDX reserves the right to manufacture all parts in advance for quantity specified on order. In the event of cancellation or change of specification, the customer will be held responsible for the cost involved. SPECIAL ORDER OR MODIFIED PRODUCTS ARE NOT CANCELABLE.
BLANKET ORDER POLICY: Blanket orders are designed to help our customers to obtain minimum quantity discount and better deliveries. Such an order will be accepted, subject to the following terms:
1. Total value shall be for a minimum of $5000.00. 2. Products and Groups cannot be combined. 3. Scheduled shipments on blanket orders may be scheduled up to 12 months with 5 scheduled shipments. One re-
scheduling is permitted during the life of the order, providing written notice is given to IDX not less than 30 days prior to delivery.
4. The total quantity shall be released within one year of date of order. An invoice will be issued to cover the difference of blanket quantity discount, if the total order is not released for shipment within one year.
5. Special items shall not be grouped with standard items, regardless of any similarity.
**PRICING SUBJECT TO CHANGE PER MARKET CONDITIONS**
DESCRIPTION PAGE # DESCRIPTION PAGE # Bill Acceptors & Credit Card Display Timers for Walls & Combo Vac
Bill acceptors for Meters 10,14 Accessories for Big Time 31 Credit card add-on solutions 10,14 Big Time Dryer Display Two Timer DD910 29 Credit Card & Fleet Card solutions with back end 8,9,10 Big Time Multi Timer – BT907 29
Circuit Boards Big Time Display Only (P900 & P900-2) 30 Digital Displays only Big Time Two Timer Relay Output (P912-) 30 Accessories for Displays 27-34 Big Time Multi Timer (P907) 30 Auto Teller – BS820A series 32 Dryer Display (PD810) 30 Big Time BT900- 28 Dryer Display Timer (PD910) 30 Big Time Two Timer BT900-2 29 Jumbo Time Sign (P820-A) 30 Digital Display for Automatic Blower / Dryer- DD810 29 Jumbo Time Two Timer (P922) 30 Jumbo Time Display – BS820 series Signs 32
Coin Counters Meter Box Digital Display (not timer) LTT800- 29 CC623 26 Stainless Steel Covers for Displays 31,33 Interface – IB100 26,28 Display Accessories
Contact/Relay Module Big Time EEPROM 33 Bill Acceptor Isolated Pulse 10,15,33,37 Big Time Processor 32,33 Coin Pulse Splitter 37 Big Time Special Program 32,33 Current Transformer 37 Big Time Enclosure 33 Dry Contact Relay 37 Little Two Timer EEPROM 20,33 Isolated Input Module for low pressure 37 Little Two Timer Processor 20,33 Plug-In Relay 36 Snubbers 22 PS300 & PS200 3rd stack Relay 14,37 Terminal Strips 20 Vendor Relay 37 Little Two Timer/ GT 200 Housing 20,33 Power Interface Relay for count-up & inhibit interface 10,14,20,31,37 Big Time LED 33
Credit Card Systems Little Two Timer / GT 200 LED 20,33 Credit Card Solution Count-Up Cellular 10 Programmer Corded - RC800 33 Credit Card Solution Pulse Cellular 10 Output Fuse for GT200 36 Credit Card Solution mounted in S/S box 10 Electrical Accessories Credit Card Solution for Venders MDB interface 10 Hour Meters 24vac 36 Credit Card Readers with Backend systems 8,9 Double Pole Plug in relays 36
Credit Card Readers replacement parts 7,11 8 Pin Socket Base 20,26,27,29,36
NTS Revalue & Kiosk Stations 7,8 11 Pin Socket Base 27,30,36 Data Acquisition Freeze Controls
Decals & Signs Temperature Probe 35 Big Time 33 Isolated Input Module for low pressure 35 Jumbo Time 33 Antifreeze Timer - AF411 26,35 Menu Signs 24 Fuses Menu Sign Service Spots 24 Slow Blow for transformer 36 Meter Box 22-24 Slow Blow for GT 200 5amp 20,36 N1 Credit Card 11 Heaters Wicket NTS Kiosk 8 Meter Box 22 Wicket NTS Bay & Meter 7,8,25 Horn / Alerts
Demos Coin Beeper & Last Alert 24/120 AC 26-28,30 Meter Box & Jumbo Time Demo’s 37 Last Alert AC 12 – 28VAC 20,28,32,36
Digital Clock Timers for Meter Boxes Last Alert DC 12 – 28VDC 28,34,36 GT 200 & GT 200-A Giga Time 20,36 I/O Module AT300 with AT300-DB3S7 Display 28 GT 20 MUX 5,19,36 Giga Timer 1200 21,36 GT200 MUX 5,19,36 Options for GT200 Display Clock 20,32,36 GT-I/O-10 5,19,36 LTT802 & GT 200 Accessories 20,32,36 SK8844 5,8
Display Timers for Walls & Combo Vac I/O-1206 5,8 Big Time Two Timer – BT912-M 31 Big Time Two Timer w/Low Profile S/S Case BT912 31 Jumbo Time Two Timer – BT922 32 Giga Timer Multi Timer GIGA TIME 1200 20,34 Giga Timer Accessories GIGA TIME 1200 20,34
LED Segments for Big Time & Jumbo Time 33 AF411 Antifreeze 27,35 LED Segments for Little Two Time/ GT 200 20,33,35 BT907DOYLE-U 29 Menu Signs Lamp 26 BT912DOYLE –U 29 Meter Box Lamp 21 BT912FRAGRA 29 Ultra Bright LED Segments for Big Time 35 Extended Time AT411E-NRIS 27 Ultra Bright LED Segments for Jumbo Time 35 LTT802FRAGRA –REPLACEMENT **GT200-A** 30
Select-a-Wash AT411E-NRIS Extended Range Time 29 Replacement Bay Meter Doors 5,6 Plug In - AT402 27 Replacement Vacuum Doors 6 Two Timer – AT422 28 Replacement Auto Entry Doors & Controls 6 Vacuum 115VAC or 24VAC - AT411E 28 Select A Vendor 6 Vacuum 220VAC or 24VAC - AT412E 28
220/208/120V x 24VAC 100 VA 36 Credit Card Pulse wiring 3’ & 10’ N1 9 220/208/120V x 24VAC 150 VA 36 Credit Card Reader to Modem 10’ cat5 N1 9 220/208/120V x 24VAC 40 VA 36 LTT802/ GT 200 Wiring Harness 20,33 Power Supply 1A 12 VAC for Edge USA Tech 36 Meter Box Wiring Harness 17,18 Power Supply IR800 9VDC 36 Remote Wire 33 Power Supply Wicket Programming 5VDC 2amp 6,10,36 Xeptor to PC C/F Power Supply Night Access Controller 12VDC 10,36 Xeptor Wiring Harness 13 Power Supply Wicket ASGSRD 12VDC 10,36 Night Access & ASGARD Shielded cable MB199-21 21 Power Supply Wicket Kiosk 24VDC 100W 36 Xeptors Power Supply WTRAM 24VAC x 12VDC 9 Bill Acceptors 10
VENDOR X12 Series Coin/ Token Xeptors 2,12 SELECT A WASH Electronic Vendor 6 Electronic – Single Quarter Only MA602- F/C/A 10 OPTIONS C/F Electronic – 6 coin Non- Coded MA850CR0???? 5,10
Wickets NTS Electronic – 12 coin Non-Coded MA85CCR0???? 5,10 SCADA Controller on site 7,8 Xeptors -Auto Entry SCADA Controller off site Gateway 7,8 American- Changer Pay Station 12 NTS Readers Credit, Wicket, Combo 7,8,9 Hamilton - ACW 12 NTS Kits 7,8 Hamilton – ACW 4 12 NTS Wireless Bridges & Gateways 7,8 Hamilton - GoldLine 12 NTS Wireless RAM 7,9 Hamilton - HTK 12 NTS Wired RAM 7,9 Exacta / Exacta One 12 Wicket Cards 9 ICS 12 NTS wiring 9 Standard Changer - Guardian 12 NTS Accessories & Spare Parts 7,8,9 Unitec Portal 11
Wickets Stored Value Unitec – Wash Select II 12 NOT AVAILABLE AT THIS TIME Xeptors - Specials
Cards – Gift 9 Multi-output Field Programmable - 3 -MA853 11 Cards – Fleet 9 MA850 12VDC 11 Cards – Service 9 X12 12VDC 12 Cards – User 9 Xeptors Venders C Module WR88 to CPU interface C/F Laurel Metals 11,12 CD Box -Module C/F D&S Mfg. 12 HV Box -Module C/F Xeptor Accessories LV Box -Module C/F Bill Acceptor Interface Module 10,33 MDB Box -Module C/F Coin Counter Multi inputs 23 Programmer module WR88PM C/F Coin Cup 13,20 RS232 to USB adaptor C/F Diverter Faceplate 13 Signs & Decals 9,22 Faceplate – 2 “ Snap-In 13 Site License C/F Faceplate – 2” (old style) 13 Wiring Harness for CD / HV / LV/ MDB Modules C/F Personality Plug 13 WR88 Reader C/F Shoulder Screw 13 WR88 Parts C/F Thickness Clip 13 Wicket ASGARD MA19 replacement parts 13 ASGARD Entry Systems 9,10 HIGH SECURITY TOKENS ASGARD Wash Club Windshield 9,10 X-Mark Single Metal Coded Tokens 38 ASGARD Replacement parts 9,10 X-Mark Bi-Metal Coded Tokens 38 Wicket KIOSK & Revalue Stations X-Mark Tokens with Decals 39 IDX Wicket Kiosk Rear Load 7 X-Mark Hologram Flag with Eagle 39 IDX Wicket Kiosk Code Entry / ASGARD 9 IDX Wicket Kiosk w / Credit Card 7 IDX Wicket Kiosk Credit Card ONLY 7 Options for Kiosk & Revalue Stations 7 Wicket TURBO Accessories Wicket Jackpot Display C/F Wicket Redemption & Registration Center C/F Wicket Night Access Stand Alone Sys C/F Wicket Night Access Computer Control Sys C/F Wicket Night Access Controller only C/F Turbo Access Options C/F Turbo Access Replacement Parts C/F
Page 5
NEW FOR 2018
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
**NEW COIN XEPTOR MODLES** TWO YEAR WARRANTY / FIRST YEAR EXCHANGED SECOND YEAR REPAIRED AND RETURNED
CONTACT IDX FOR DETAILS & PRICING MODEL SERIES “MA850” and “X12”
X12CR5A0C34F TWO YEAR WARRANTY ACCEPTS 6 COIN AND OR X-MARK TOKEN WITH COIN SENSE OPTICS $269.97 C ADVANCED PROCESSOR FIRMWARE FOR BETTER DISTINGUISHING BETWEEN SIMULAR COIN TYPES OF SAME OR DIFFERENT SIZES AND SEPERATING X-MARK HIGH SECURITY TOKENS ANGLE CODES 75/150 FROM SAME METAL & SIZE OTHER X-MARK TOKENS AS WELL AS GENERIC TOKENS X12CR390C34F TWO YEAR WARRANTY ACCEPTS 6 COIN AND OR X-MARK TOKEN XEPTOR WITH COIN SENSE OPTICS $269.97 C ADVANCED PROCESSOR FIRMWARE FOR BETTER DISTINGUISHING BETWEEN SIMULAR COIN
TYPES OF SAME OR DIFFERENT SIZES AND SEPERATING X-MARK HIGH SECURITY TOKENS ANGLE CODES
45/135 FROM SAME METAL & SIZE OTHER X-MARK TOKENS AS WELL AS GENERIC TOKENS MA850CR0C34F TWO YEAR WARRANTY ACCEPTS UP TO 6 COIN AND NON X-MARK TOKENS WITH COIN SENSE OPTICS $231.67 C ADVANCED PROCESSOR FIRMWARE FOR BETTER DISTINGUISHING BETWEEN SIMULAR COIN TYPES OF SAME OR SIMULAR METALS WITH DIFFERENT SIZES MA85CCR0C34F 12 COIN VERSION OF MA850 SERIES TWO YEAR WARRANTY AND SAME FEATURES AS THE MA850 SERIES $279.97 C
** NEW IO MODULES**
GT 20 MUX “IO” MODULE WITH 20 INPUTS & 22 RELAY OUTPUTS THAT CAN BE USED FOR EXSPANDED PUSH BUTTON $398.00 E METER BOX TO OFFER PREMIUN SERVISES OR INDUSLTRIAL APLICATIONS WITH SERIAL INPUTS AND OUTPUTS GT-I/O-10 “IO” MODULE USED IN COMBO VAC TO ADD PUSH BUTTONS WITH 10 INPUTS & 12 OUTPUTS SPECIAL $378.00 E FIRMWARE OR FOR INDUSLTRIAL APLICATIONS WITH SERIAL INPUTS AND OUTPUTS I/0-1206 “IO” MODULE HAS 6 PAIR OF INPUTS AND EACH INPUT PAIR HAS 2 OUTPUTS TIED TO THEM, GREAT FOR CONTROLING $375.00 E THE SAME CHEMICAL WITH 2 DIFFERENT PRESURES SUCH AS HIGH AND MEDIUM PRESURE WAX OR PRESOAK ETC SK8844-M IO MODULE WITH 8 DIGITAL INPUTS & OUTPUTS PLUS 4 ANALOGUE INPUTS AND OUTS. MASTER UNIT WILL $695.00 A COMUNICATE WITH THE SLAVE MODLE # SK-8844-S TO EXSPAND IN PUTS & OUTPUTS AND REMOTE UPDATES SK-8844-S IO MODULE WITH 8 DIGITAL INPUTS & OUTPUTS PLUS 4 ANALOGUE INPUTS AND OUTS $649.00 A
** SELECT-A-WASH ** ** REPLACEMENT METER DOORS **
COMPLETE INCLUDING NTS CREDIT CARD READERS SWS-G/D&H 9 REPLACEMENT 8.5” DOOR FOR GINSAN & D&H W/ 12 PUSH BUTTONS, GT200 TIME, X12 XEPTOR, DECALE $2866.12 E ALERT HORN, HEATER, GT 200 MUX , NTS CREDIT CARD READER & WTRAM WITH QUICK DISCOUNECT SWS-G/D&H 10 REPLACEMENT 10” DOOR FOR GINSAN & D&H W/12 PUSH BUTTONS, GT200 TIME, MEI $1/5/10/20 BILL $3014.45 E ACCEPTOR, X12 XEPTOR, HORN, HEATER, GT200 MUX, NTS CREDIT CARD READER W/ WTRAM, DECALE SWS-G/D&H 12 REPLACEMENT 12” DOOR FOR GINSAN & D&H W/12 PUSH BUTTONS, GT200 TIME, MEI $1/5/10/20 BILL $3166.00 E ACCEPTOR, X12 XEPTOR, HORN, HEATER, GT200 MUX, NTS CREDIT CARD READER W/ WTRAM, DECALE SWS-JCM 12 BAY REPLACEMENT 11.6255” METER DOOR-JIM COLMAN W/12 PUSH BUTTONS, GT200 TIME, MEI $1-20 BILL $3825.00 E ACCEPTOR, X12 XEPTOR, HORN, HEATER, GT200 MUX, NTS CREDIT CARD READER W/ WTRAM, DECALE
Page 6
MODEL NUMBER DESCRIPTION MSRP DISC.
CODE
** SELECT-A-WASH ** ** REPLACEMENT METER DOORS ** COMPLETE INCLUDING NTS CREDIT CARD READERS SWS-JCM 12 FV REPLACEMENT FRAGANCE VAC DOOR-JIM COLMAN W/4 PUSH BUTTONS, GT1200 TIME, MEI $1/5/10/20 $3950.00 E VALADATOR, X12 XEPTOR, HORN, HEATER, GT-I/O-10, NTS CREDIT CARD READER W/ WTRAM, DECALE SWS-JCM 12 SV REPLACEMENT SHAMPOOER VAC DOOR-JIM COLMAN W/3 PUSH BUTTONS, GT1200 TIME, X12 XEPTOR $3925.00 E MEI BILL $1/5/10/20, HORN, HEATER, GT-I/0-10, NTS CREDIT CARD READER W/WTRAM,CUSTOM DECAL SWS-D&S 13 BAY REPLACEMENT 13” BAY METER DOOR- D&S W/12 PUSH BUTTONS, GT200 TIME, MEI $1/5/10/20 BILL $3266.00 E ACCEPTOR, X12 XEPTOR, HORN, HEATER, GT200 MUX, NTS CREDIT CARD READER W/ WTRAM, DECALE
FOR OTHER REPLACEMENT METER DOORS CONTACT IDX
** SELECT-A-WASH ** ** REPLACEMENT AUTO ENTRY DOORS ** SWS-SELECTA SELECTAWASH II RETROFIT DOOR KIT, 4” HMI COLOR SCREEN, X12 COIN XEPTOR, COINCO $1-20 $6495.00 A
WASH U PRINTER, SPEAKER, PRESENCE SENSOR, NTS CREDIT CARD SOULTION, PLUG DIRECTLY INTO INTERNET, 4 BUTTON SELECTIONS, POWER SUPPLY, CPU, USES EXISTING HOPPER SWS-SELECTA HAMILTON ACW RETROFIT DOOR KIT, 4” HMI COLOR SCREEN, X12 COIN XEPTOR, COINCO $1-20 $6895.00 A
WASH H PRINTER, SPEAKER, PRESENCE SENSOR, NTS CREDIT CARD SOULTION, PLUG DIRECTLY INTO INTERNET, MONEY CONTROLS HOPPER, 4 BUTTON SELECTIONS, POWER SUPPLY, CPU SWS-SELECTA ENTRY WIZARD RETROFIT DOOR KIT, 12” HMI COLOR TOUCH SCREEN, X12 COIN XEPTOR, $6995.00 A
WASH JCM COINCO $1-20, PRINTER, SPEAKER, PRESENCE SENSOR, NTS CREDIT CARD SOULTION, PLUG DIRECTLY INTO INTERNET, MONEY CONTROLS HOPPER, POWER SUPPLY, CPU SWS-SELECTA AMERICAN PAYSTATION RETROFIT DOOR KIT, 8” HMI COLOR TOUCH SCREEN, X12 COIN $6795.00 A
WASH AM XEPTOR, COINCO $1-20, PRINTER, SPEAKER, PRESENCE SENSOR, NTS CREDIT CARD SOULTION PLUG DIRECTLY INTO INTERNET, POWER SUPPLY, CPU
UPGRADE OPTIONS CODE ACCEPTANCE, BAR CODE READERS, LOYALITY PROGRAMS BUYUP FEATURE, DUAL HOPPERS, DISPENSE FOR VACUUM TOKEN MEI VALADATOR, CUSTOM DECALS, PIN HOLE CAMERS, AND MORE FOR OTHER CONFIGURATIONS CONTACT IDX
** NEW SELECT A VENDOR ** POWERED BY IDX SWS-VN900 SELECT A VEND VN900 SCREW VENDER W/ 8” HMI COLOR TOUCH SCREEN, 9 SHELFS ASSORTED $4495.00 A
SIZES, EASY FILL AS SHELFS ROTATE OUT, MULTI PRICING CONFIGUARATION, DESIGNED TO VEND MULTIPUL PRODUCTS WITH ONE TRANACATION, COINCO BILL ACCEPTOR $1-20, X12 COIN XEPTOR, NTS CREDIT CARD SOULTION, MONEY CONTROLS CHANGE HOPPER, SPEAKER, GUARANTEE VEND, STAINLESS STEEL 16 GAUGE CABINET, DUAL T HANDLE LOCKS, COMPACT SIZE 12.25” D x 32.5” W x 33.5” H. FOR OTHER CONFIGURATIONS CONTACT IDX WATCH FOR ADDITIONAL NEW PRODUCTS TIMERS, BAY METERS, CONTROLLERS, WIRELESS SOLUTIONS & MORE
Page 7
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
*ASGARD™CENTRALIZED PAYMENT SYSTEM* CAR WASH, LAUNDRY & PARKING SK NTS-ASGARD ASGARD KIOSK TO DISPENSE ACTIVACTION CODES, 8” COLOR HMI TOUCH SCREEN $7925.00 A KIOSK RL2 WASH CODE / RECEIPT PRINTER, COIN CO $1-20 BILL ACCEPTANCE, X12 COIN XEPTOR COIN HOPPER, IDX NTS CREDIT CARD PHONE PAY & EMV READER / WICKET CARD OPTION, VOICE PROMPTS, PRESENSE SENSOR TO ACTIVATE GREETING SK KIOSK-BB SINGLE NOTE BILL BRAKER ADD ON WITH LOCKABLE BILL DRAWER ADD-ON $4870.00 A SK KIOSK-CH SINGLE COIN HOPPER – MAX 2 PER KIOSK ADD-ON $985.00 A SK KIOSK-WCD DISPENSER FOR FLEET / GIFT / LOYALTY CARDS $2215.00 A SK-NTS300 ACTIVACTION TERMINAL WITH 10 POSITION TOUCHPAD, WTRAM INTERFACE MODULE $725.00 E WIRED OR WIFI BACK TO ASGARD KIOSK –REQUIRES 1 FOR EACH STATION SK-NTS-READER REQUIRED TO ACCEPT WICKET CARD, CREDIT CARDS, AND NFC PHONE PAYMENT $357.14 E
**NEW WICKETS NTS KIOSK’S** PURCHASE & ADD VALUE TO WICKET CARDS ONLY
SK-NTS KIOSK Wickets KIOSK REAR LOAD WITH CARD DISPENSER (100 CARDS) COINCO BILL ACCEPTOR $1,5,10.20 10” HMI $5497.00 A RL#1 TOUCH SCREEN, CONTROLLER, WICKET NTS CARD READER, 12VDC CONTROLS, RERCIPT PRINTER, HEAVY DUTY STEEL POWERED COATED CABINET WITH STAINLESS STEAL FACE PLATE 2’ WIDER THAN CABINET 16”W x 20”H x 13” D SK-NTS KIOSK Wickets KIOSK REAR LOAD W/CARD DISPENSER (100 CARDS) NTS 3 WAY CREDIT CARD READER, COINCO $5997.00 A RL#2 BILL ACCEPTOR $1,5,10.20 10” HMI TOUCH SCREEN, CONTROLLER, 12VDC CONTROLS, RERCIPT PRINTER, HEAVY DUTY POWERED COATED CABINET WITH STAINLESS STEAL FACE PLATE 2’ WIDER THAN CABINET 16”W x 20”H x 13” D SK-NTS KIOSK Wickets KIOSK REAR LOAD CREDIT CARD ACCEPTANCE ONLY WITH CARD DISPENSER (100 CARDS), NTS 3 $5657.00 A RL#3 WAY CREDIT CARD READER 10” HMI TOUCH SCREEN, CONTROLLER, 12VDC CONTROLS, RERCIPT PRINTER, HEAVY DUTY POWERED COATED CABINET WITH STAINLESS STEAL FACE PLATE 2’ WIDER THAN CABINET 16”W x 20”H x 13” D
MULTI FUNCTION WICKET KIOSK - PURCHASE AND ADD VALUE TO WICKET CARDS, “PURCHASE TOKENS AND / OR RECEIVE CHANGE”
SK-NTS KIOSK Wickets KIOSK REAR LOAD W/CARD DISPENSER, 2 COIN HOPPERS, 2 COINCO BILL ACCEPTORS $1,5,10,20 10”HMI $6999.00 A RLWTC #1 COLOR TOUCH SCREEN with action prompt that instruct customer on what action required. NTS 3 WAY combo credit Card reader Mag strip, EMV chip, Apple and Droid Pay Make purchase or add value To Wicket card, Purchase Tokens or receive change.
WICKETS™ NTS and SCADAWash™ SOLUTIONS CREDIT CARD SOLUTION, DATA ACTUATION AND FLEET ACCOUNTS
VIA IDX CELLULAR TUNNELL OR IP ADDRESS TO SECURE GATEWAY
LOYALITY PROGRAMS U.S.A. PATENT #4,998,612 / #5,121,824 / #7,268,688, B2 SK-NTS KIT COMBO- WICKET NTS™ RFID READER AND “SMART CREDIT CARD READER” SK-NTS CCR-SMART $899.00 E COMBO WITH SK-WT RAM-NTS WIRELESS MODULE, DECAL AND WIRING HARNESS SK-NTS GATEWAY SECURE ACCESS POINT TO CLOUD SERVER FOR CREDIT CARD ONLY NTS™. NEMA 4- 18” H x 16” W x 11” D $1699.00 A SK-NTS GATEWAY- SECURE ACCESS POINT TO CLOUD SERVER COLLECTS DATA FROM ALL CONNECTED DEVICES, MONITOR CASH, $2299.00 A PRO CREDIT CARD, WICKET ACTIVATE, CHANGE PROGRAMM ING IN IDX DISPLAY TIMERS, SET VALUES FOR CARD READERS AND ALLOWS OPERATOR TO SET UP A CUSTOMER WICKET CARD. SK-SCADAWASH-1 SCADAWash™ IS THE CONTROLLER FOR WICKETS NTS™ RFID CARD & CREDIT CARD CONTROLLER THE STANDARD $4795.00 A MODEL INCLUDES A 15” TOUCH SCREEN, MOUNTED IN A CABINET, W/ WICKET READER, NTS SOFTWARE- STORES WICKET™ CARD BALANCES, ASGARD™ CONTROLS & COLLECT DATA USAGE DATA WIRELESSLY FROM EACH WT RAM-NTS VIA A WIRELESSLY. SCADAWash™ IS ALSO THE CREDIT CARD GATEWAY REQUIRES OPTIONAL SK-SCADA CELL AND THIS ALSO GIVES YOU REMOTE VIEWING OF WASH ACTIVITY. NEMA 4- 24.5” H x 20” W x 11” D
MONTHLY FEES FOR GATEWAY CONNECTION, CLOUD ACCESS TO SECURE GATEWAY SERVER AND BACKUP FILES
Page 8
MODEL NUMBER
DESCRIPTION MSRP
DISC. CODE
“WASH COMMANDER” SK-UWC UNIVERSAL WASH CONTROLLER IS DESIGNED TO REPLACE THE OLD ANTIQUATED AUTOMATIC WASH $7,500.00 A CONTROLLERS MOUNTED IN A NEMA4 ENCLOSURE IS A 12” TOUCH SCREEN CONTROLLER, INTERNAL POWER SUPPLY, USING IDX IO MODULE W/ 24 INPUTS & OUTPUTS, THE UWC FIRMWARE WILL ALLOW THE OWNER TO CONFIGURE HIS WASH CYCLES, ADJUST SPEEDS, DWELL TIMES, SET WEEP CONTROLS, MONITOR CHEMICAL USAGE AND MORE. SK-TC TUNNEL COMMANDER DESIGNED TO MEET THE MODERN TUNNEL WASH OWNERS AND INSTALLER NEEDS FOR $7,995.00 A EASY INTERFACE USING A 12” TOUCH SCREEN TO WASH COMMANDER SOFTWARE, 24 INPUTS AND OUTPUTS USING THE IDX IO MODULES, FIRMWARE WILL ALLOW THE OWNER TO CONFIGURE WASH CYCLES, SPECIALS, CONVEYOR SPEEDS, CHEMICAL USAGE, SIGNAGE, NOTIFY WHEN MAINTENANCE IS REQUIRED ON EACH PIECE OF EQUIPMENT, AUDIT FEATURES, REMOTE ACCESS BY OWNER IF EQUIPPED FOR CELLULAR OR ETHERNET & MORE. SK-TC / 32 TUNNEL COMMANDER UP GRADED WITH 32 INPUTS & OUTPUTS WITH 12” TOUCH SCREEN $8,995.00 A SK-TC / 48 TUNNEL COMMANDER UP GRADED WITH 48 INPUTS & OUTPUTS WITH 15” TOUCH SCREEN $11,995.00 A SK-TC / 72 TUNNEL COMMANDER UP GRADED WITH 72 INPUTS & OUTPUTS WITH 15” TOUCH SCREEN $13,995.00 A SK-TC / 96 TUNNEL COMMANDER UP GRADED WITH 96 INPUTS & OUTPUTS WITH 15” TOUCH SCREEN $15,995.00 A SK-8844-M IO MODULE WITH 8 DIGITAL INPUTS & OUTPUTS PLUS 4 ANALOGUE INPUTS AND OUTS. MASTER UNIT WILL $695.00 A COMUNICATE WITH THE SLAVE MODLE # SK-8844-S TO EXSPAND IN PUTS & OUTPUTS AND REMOTE UPDATES SK-8844-S IO MODULE WITH 8 DIGITAL INPUTS & OUTPUTS PLUS 4 ANALOGUE INPUTS AND OUTS $649.00 A
** ASK ABOUT OTHER OPTIONS AND CONFIGURATIONS** **ON THE WASH COMMANDER PRODUCT LINE**
WICKETS™ NTS CREDIT & FLEET CARD SYSTEM
And SCADAWash™ SOLUTION
SK-SCADAWASH-1 SCADAWash IS THE CONTROLLER FOR WICKETS NTS RFID CARD AND CREDIT CARD CONTROLLER $4795.00 A THE STANDARD MODEL INCLUDES A 15” TOUCH SCREEN, MOUNTED IN A CABINET, WITH WICKET READER, NTS SOFTWARE- STORES WICKET CARD BALANCES, ASGARD CONTROLS & COLLECT DATA USAGE DATA WIRELESSLY FROM EACH WT RAM-NTS VIA A WIRELESS MODEM PROVIDED. IF CREDIT CARD READERS ARE ATTACHED SCADAWash CONTROLLER IS THE GATEWAY TO THE MERCHANT ACCOUNT. THE OWNER CAN VIEW HIS SITE REMOTELY BY LOGING INTO THE SCADAWash WEBSITE. SK-SCADAWASH-2 SCADAWash WITH 2 IDX 8844 IO MODULES $5200.00 A SK-NTS GATEWAY CELLULAR ACCESS POINT TO A SECURE CLOUD SERVER FOR PROCESSEING CREDIT CARD & WICKET CARD $2299.00 A
-PRO DATA, COLLECTS DATA FROM ALL CONNECTED CASH DEVICES, MONITORS, WICKET ACTIVATE & BACKS UP INFORMATION TO THE CLOUD SERVER. CHANGE PRICING & MESSAGING IN IDX DISPLAY TIMERS, “SETUP SPECIALS” LIKE TIME OF DAY OR HOLLIDAY PRICING, SET UP WICKETS CARDS / FLEET CARD ACCOUNTS, ADD FUNDS AND OR BILL ACCOUNTS AT THE SCADAWASH WEB SITE SK-NTS GATEWAY CELLULAR ACCESS POINT TO SECURE CLOUD SERVER FOR PROCESSING CREDIT OR WICKET CARDS “ONLY” $1699.00 A CONSULT FACTOR FOR CUSTOM CONFIGURATION
SK-NTS-COMBO- COMBO- WICKET NTS CREDIT / WICKET CARD RFID READER, WTRAM WIRED PORT VIA CAT5,12VDC $899.00 E WIRED POWER SUPPLY AND WIRING HARNESS
SK-NTS-COMBO- COMBO- WICKET NTS CREDIT / WICKET CARD RFID READER, WTRAM WIFI CONNECTION,12VDC POWER $899.00 E WIFI SUPPLY AND WIRING HARNESS
SK NTS-WIFI-ANT K WIFI ANTENNA WITH 15’ CABLE, MOUNTED ENDS AND MOUNTING BRACKET $109.95 A SK-NTS CELLUAR CELLULAR ANTENNA FOR GATEWAY INCLUDES 25’ HEALIX COAXAIL CABLE W/ ENDS AND MOUNTING $399.95 A
ANTENNA KIT HARDWARE SK-NTS ROUTER/ WIRELESS WIFI NETWORK ACCESS POINT AND WIRELESS NETWORK BRIDGE $319.00 E
BRIDGE SK-NTS-BRIDGE WIFI HIGH GAIN ANTENNA FOR ROUTER / BRIDGE INCLUDES 15’ HEALIX COAXAIL CABLE W/ ENDS AND $297.00 A
ANT KT MOUNTING HARDWARE MONTHLY FEES APPLY FOR CLOUD ACCESS TO SECURE SERVER YOUR BACKUP FILES AND CELLULAR DATA CONNECTION
Page 9
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
WICKETS NTS ACCESSORIES AND SPARE PARTS
SK-NTS-READER NTS SMART CREDIT CARD READER W/CABLE & 6 PIN PLUG TO BE ATTACHED TO WT RAM-NTS $357.14 E WT-RAM WIRELESS INTERFACE BETWEEN SCADA WASH OR NTS GATEWAY AND WICKET NTS CONTROLS $429.00 E WT-RAM-POWER POWEER SUPPLY FOR WT-RAM CONVERTS 24VAC – 12VDC 5 AMPS $53.85 E CONVERTER WT-RAM WIRING POWER & INTERFACE WIRING $59.95 E WT-RAM ANTEN #1 ANTENNA FOR SK-NTS RAM $66.95 E BS WR1 WICKET BAY INSTRUCTION SIGN 8.5”x11” UV COATED PLASTIC $25.11 D BS WR2 WICKET METER INSTRUCTION DECAL “TAP HERE” 1.5” x 1.5” $2.58 D
WICKETS SV & NTS CARD
WS1C??????? WICKETS SV SK-NTS CARD NTS STOCK CARD PRICING 1 - 50 $4.99 EACH A 100 – 2,500 $2.35 EACH A 3,000 - 14,000 $2.20 EACH A 15,000 C/F A CUSTOM CARDS MINIMUM OF 1000 SOLD IN LOTS OF 500 $2.35 EACH + $150.00 SET UP CUSTOM CARDS MINIMUM OF 3,000 SOLD IN LOTS OF 500 $2.29 EACH – NO SET UP CHARGE
REPLACEMENT SERVICE CARDS WS1P??????? PROGRAMMING CARD 6.66 A WSIR??????? REPORT CARD 6.66 A WSIS??????? SERVICE CARD 6.66 A WS1F??????? FLEET CARDS –STOCK CARDS SOLD IN LOTS OF 100 2.34 A
ASGUARD SECURITY ACCESS CONTROLS FOR GATES, PARKING AND MORE U.S.A. PATENT #7,268,688,B2
SK NTS-ASGARD ASGARD CASHLESS CODE KIOSK, DISPENSE ACTIVACTION CODES, 8” COLOR HMI TOUCH SCREEN, WASH $7695.00 A KIOSK RL1 CODE RECEIPT PRINTER, NTS CREDIT CARD, PHONE PAY AND EMV COMBO READER, PRESENSE SENSOR TO ACTIVATE GREETING AND VOICE PROMTS, 1- SK-NTS500 ACTIVACTION TERMINAL-WITH TOUCH PAD, DISPLAY AND STAINLESS-STEEL STAND.
CONTACT IDX FOR OTHER OPTIONS AND CONGIGUARTIONS NTS FLEET CARDS AND OR NTS WINDSHIELD TAGS BILL ACCEPTANCE, COIN ACCEPTANCE, CHANGE AND MORE
**FOR REMOTE ACCESS AND CLOUD BASE MANAGMENT A GATEWAY IS REQUIRED**
SK-NTS GATEWAY SECURE ACCESS POINT TO CLOUD SERVER FOR DATA COLLECTION, REMOTE CONTROLS, UPDATE $2299.00 A PRO USER BASE, MONITORING ACTIVITY, ACCOUNT MANAGEMENT, BILLING OPTIONS
SECURE CLOUD ACCESS, USE OF SOFTWARE AND SECURE FILE BACKUP A MONTHLY FEE IS REQUIRED SK-NTS500 ASGARD ACTIVACTION TERMINAL STAND INCLUDES SK-NTS300 PAD WITH WTRAM, SUNLIGHT READABLE $1555.00 E DISPLAY, AUDABLE ALERT, MOUNTED IN A STAINLESS-STEEL ENCLOUSER AND STAND, REQUIRES 1 PER EACH ACTIVACTION OR ENTERY POINT SK-NTS300 ASGARD ACTIVACTION TERMINAL WITH 10 POSITION TOUCHPAD, WTRAM INTERFACE MODGULE, $725.00 E WIRED OR WIFI BACK TO KIOSK. REQUIRES 1 PER ACTIVACTION / ENTERY POINT
Page 10
MODEL NUMBER DESCRIPTION MSRP
DISC.
CODE
ASGARD WASH CLUB WINDSHEILD TAG SYSTEM
SK NTS-ASGARD ASGARD WASH CLUB SYSTEM DESIGNED TO ACTIVATE A PRE-SLECTED WASH AT THE ENTRY $7495.00 A WC-1 STATION OF THE AUTOMATIC OR TUNNELL WASH USING IDX RFID WINDSHIELD TAG OR CARD
WITH ASGARD OVERHEAD OR MACHINE MOUNTED READER TO ACCESS INFORMATION STORED ON THE IDX SECURE CLOUD SERVIER. OWNER CAN SELECT AND SET UP THE ASGARD WC PROGRAM THAT WORKS FOR HIS LOCATIONS TO ACTIVATE THE DESIRED WASH PACKAGES AND BILLING OPTIONS. HE CAN ADD A FREE VACUUM OPTION THAT USES EITHOR A CODE OR NTS RFID CARD AT THE VACUMM EQUIPPED WITH THE NTS CREDIT CARD READER. INCLUDES 1- OVER RFID HEAD WITH POLE BRACKET ,1- 8’ S/S POLE MOUNTING WITH BASE SK NTS-ASGARD ASGARD WASH CLUB SYSTEM DESIGNED TO ACTIVATE A PRE-SLECTED WASH AT THE STANDARD $5995.00 A
WC-2 CHANAGE MAKERS ENTRY SYSTEMS POWERED BY IDX OR WITH THE SELECT A WASH REPLACE - MENT ENTRY DOORS AND CONTROLS (CODE ENTRY OPTIONAL). ALL THE SAME FEATURES AS SK NTS-ASGARD WC-1. ST NTS-ASGARD ADD-ON ADDITIONAL LANE PACAKAGE INCLUDES– 1- OVER RFID HEA AND 1- POLE MOUNTING $1995.00 A
WC-AD-1 BRACKET/ 1- 8’ STAINLESS STEEL POLE WITH BASE, AND ADDITIONAL CONTROLS
OPTIONS FOR IDX METER BOXES BILL ACCEPTORS AND CREDIT CARD
ALL BILL ACCEPTORS LISTED CAN BE MOUNTED IN METER BOXES FOR NO ADDITIONAL CHARGE
BCMEI2654 MEI 2600 SERIES 12VDC BILL ACCEPTOR W/ 24VAC-12VDC POWER SUPPLY ACCEPT $1-20 BILLS $557.00 A BCMEI2400 MARS 2400 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $2, & $5 $555.50 A BCVP64R44US COIN CO VANTAGE SERIES BILL ACCEPTOR –12VDC/24VAC - WILL ACCEPT U.S. BILLS $1, $5, $10, & $449.00 A $20 PROGRAMABLE, INCLUDES 24 VAC TO 12 VDC POWWER & SUPPLY 400 BILL BOX BC24/12WIRING WIRING HARNESS WITH 24VAC TO 12VDC POWER CONVERTER $53.88 A PSU2412-15-AP 24VAC TO 12VDC 1.5AMPS POWER CONVERTER FOR BILL ACCEPTOR ONLY 34.29 A MA70-V ISOLATED 24VAC POWER SUPPLY AND DISABLE RELAY MODULE FOR BILL ACCEPTORS $33.50 C
NON-IDX CREDIT CARD CONTROLS CAN BE MOUNTED IN IDX METERS
HAMIL 100-0127 HAMILTON DAN SYSTEM METER BOX CONTROLS MB155 & MCD155 SERIES ONLY $C/F A WASH GEAR SE WASH GEAR METER BOX CONTROLS MB150, MB155, MCD150, & MCD155 SERIES $C/F A N1 IRIS-VP0SB IN ONE TECHNOLOGIES READER & IRIS CELLULAR TRANSMITTER PULSE INTERFACE ACCEPTS $731.11 A MAG STRIP, RFID , NFC AND CONTACT CREDIT CARDS WITH VERIZON CELLULAR N1 IRIS-VPOSB KIT2 IN ONE IRIS-VPOSB MOUNTED IN S/S CASE W/ CUSTOM DECAL SIZE 12”W x 7.35”H x 2.5”D W/READER 4.094”D $989.43 A N1 IRIS-VP0SB MDB IN ONE TECHNOLOGIES READER & IRIS CELLULAR TRANSMITTER VENDING INTERFACE $731.11 A N1 IRIS-VP0SB GSM IN ONE TECHNOLOGIES READER & IRIS CELLULAR TRANSMITTER PULSE INTERFACE ACCEPTS $806.11 A MAG STRIP, RFID, NFC AND CONTACT CREDIT CARDS WITH AT&T CELLULAR N1 IRIS-VPOSB KIT3 IN ONE IRIS-VPOSB MOUNTED IN S/S CASE WITH CUSTOM DECAL WITH AT&T CELLULAR $1064.43 A N1 IRIS CT UP KIT IN ONE-IRIS COUNT UP KIT FROM PULSE – MA79 RELAY, 16MM STOP BUTTON, HARNESS & DECAL $75.00 E N1 ICS-ANT-0 1 IN ONE MAG MOUNT ANTENNA $27.78 A N1 ICS-ANT-03 IN ONE HIGH GAIN STUB MOUNT ANTENNA W/ 3’ CABLE 66.67 A N1 IRIS READER IN ONE SMART CARD READER IN BLACK $210.00 A N1 IRIS-MODEM IN ONE CELLULAR IRIS COMPACT MODEM $488.89 A MBWH-N1-HIBIT WIRING HARNESS FOR POWER SUPPLY FOR IRIS MODEMS USED IN AUTOMATICS TO INHIBIT $65.32 D IRIS ACCEPTANCE / STOP CARD ACCEPTANCE AT READER REQUIRES MA79 FOR INHIBIT HI MBWH-N1 IRIS WIRING HARNESS FOR IRIS MODEMS N1-KIT 1/ KIT 2/KIT01/KIT02 PULSE OUT / CARD READER $61.32 D MA79 POWER RELAY USED W/ COUNT-UP CREDIT CARD SYSTEMS TO HANDLE LOAD POWER AND FOR $33.50 C INHIBIT CIRCUIT IN AUTOMATICS, LAUREL VENDERS, & etc DEC-N1-C DECAL FOR N1 38600 KIT 2, N1 ICS-VPOSB-KIT 02, AND N1 IRIS-VPOSB KIT $46.15 D
CONSULT IDX ON OTHER CREDIT CARD SYSTEMS FOR ADD-ON CHARGES
Page 11
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
2 YEAR WARRANTY -MA602, MA850 & X12 ELECTRONIC COIN “XEPTORS”
ELECTRONIC SINGLE COIN “XEPTORS” ALL IDX COIN ACCEPTORS CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGES
MA602-F GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR” STAND. QUARTER ONLY W/ BENT COIN $170.20 C RELEASE, COIN SENSE OPTICS, 2” WIDE STAINLESS STEEL FACEPLATE & 4 WIRE RELAY OUTPUT MA602-A GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR - INSERT ONLY- $154.95 C MA602-C GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR MOUNTED IN MA20 FACE PLATE $178.57 C
**NEW- MULTI COIN ELECTRONIC COIN “XEPTORS”** U.S. 5,046,841; AUS. – 619,639; CAN. – 1,313,806; U.K. – 2,227,347
MA850CR0C34F HAWK SOLID STATE MULTI-METAL / MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL $231.67 C FACEPLATE. THE OEM’S DREAM “XEPTOR” W/ IT’S FIELD PROGRAMMABLE, MULTI-NATIONAL COIN CAPABILITY AND ACCEPTS 6 DIFFERENT SIZES OF COINS OR TOKENS WITH DIFFERENT VALUES. NEW PROCESSOR CHIP DESIGNED BY IDX TO INCREASE COIN ACCEPTANCE INCLUDES COIN SENCE OPTICS (ANTI- STRING FEATURE) 2 YEAR WARANTY - 1ST YEAR ADVANCE REPLACEMENT. IT’S EXCLUSIVE ELECTRONIC DESIGN OFFERS A BENT COIN RELEASE IN AN ELECTRONIC
“XEPTOR” TO MAKE COIN JAMS A THING OF THE PAST. THE MA19 FACEPLATE DESIGN REDUCES THE XEPTOR FRAME FROM BEING TOURQUED DUE TO A BENT METER DOOR .THIS “XEPTOR’S”
MULTI-COLOR INDICATOR LED SHOWS OPERATIONAL STATUS & FIELD DIAGNOSTICS. MA850CR0C34A HAWK “XEPTOR” WITH COIN CREDIT OPTICS AND SIZED FROM 1.130” TO 0.888” LESS FACEPLATE $220.00 C MA850CR0C34C HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.888” WITH MA20 “OLD STYLE” $241.00 C 2 “ WIDE FACEPLATE MA850CF0C34F HAWK “XEPTOR” SET UP WITH FRAGRAMATIC WIRING TO ACCEPT COINS SIZED FROM 1.130” TO $269.67 C 0.888” WITH MA19 SNAP- IN FACEPLATE MA850CL0034A HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.952” WIRED FOR LAUREL $272.00 C ELECTRONIC VENDORS MA850CR0H34F HAWK “XEPTOR” SET UP TO ACCEPT AUSTRALIA’S AND NEW ZEALAND’S $1 AND $2 COINS $231.67 C MA850CR0H34F HAWK “XEPTOR” SET UP TO ACCEPT BRITISH 1POUND AND 50 PENCE COINS $231.67 C MA853SM0C34F HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH 3 SEPARATE COIN SIGNALS AND ACCEPTS 6 $348.00 C DIFFERENT COINS MOUNTED IN MA19 SNAP-IN FACEPLATE AND UNITEC PORTAL WIRING. MA853SM0C34A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” W/ 3 SEPARATE COIN SIGNALS LESS FACEPLATE $336.38 C MA850SP0C34F HAWK 6 COIN MUILT-COIN “XEPROR” 12VDC INPUT VOLTAGE RELAY OUTPUT W/ MA19 FACE PLATE $239.67 C MA85CCR0C34F HAWK 12 COIN MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL FACEPLATE. SAME $279.97 C FEATURES AS THE MA800 BUT WILL ACCEPT UP TO 12 DIFFERENT COIN TYPES OF DIFFERENT SIZES AND DENOMINATIONS FOR DIFFERENT MA850 SERIES MODELS
CONTACH IDX
Page 12
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
X12 SERIES “XEPTORS®” 2 YEAR WARANTY FOR SITE SPECIFIC CODED X-MARK® TOKEN PATENT U.S. 5,046,841; AUS. 619,639; CAN. 1,313,806; U.K. 2,227,347 ALL ACCEPTORS LISTED MAY BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGE X12CR5AC34F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” ® W/ MA19 SNAP-IN STAINLESS STEEL $269.67 C FACE-PLATE SOARS HIGH ABOVE THE REST WITH ITS MULTI COIN / TOKEN CAPABILITY. IDEAL FOR MIXING PROMOTIONAL TOKENS WITH STANDARD ONES & THE CONVENIENCE OF MIXING OLD TOKENS NEW ONES DURING CHANGE OVER PERIOD. ITS EXCLUSIVE ELECTRONIC DESIGN OFFERS A COIN RELEASE LEVER IN AN ELECTRONIC CODED “XEPTOR” TO MAKE JAMS A THING OF THE PAST. THIS “XEPTOR” OFFERS X-MARK® OPTICALLY ENCODED TOKENS & A MULTI-COLOR INDICATOR LED FOR OPERATIONAL STATUS & FIELD DIAGNOSTICS. NEW PROCESSOR CHIP DESIGNED BY IDX TO INCREASE COIN ACCEPTANCE INCLUDES COIN SENCE OPTICS (ANTI-STRING FEATURE) 2 YEAR WARANTY - 1ST YEAR ADVANCE REPLACEMENT. X12CR39C34F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR”. WITH 45/135 SECURITY ANGLE CODE MOUNTED $269.67 C IN MA19 SNAP-IN FACEPLATE X12CR??C34A EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” INSERT ONLY WITH RELAY WIRING HARNIESS $258.00 C X12CF??C34F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” SETUP FOR FRAGRAMATIC WITH FRAGRA WIRING $279.67 C AND PLUG AND SNAP-IN MA19 STAINLESS FACE PLATE X12CM5AC34F EAGLE OPTICAL ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH 3 SEPARATE COIN SIGNALS, 6 $356.97 C DIFFERENT COIN MOUNTED IN MA19 SNAP-IN FACEPLATE. USED BY SEVERAL AUTO ENTRY OEM’S X12SH5AC34A EAGLE OPTICAL ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH 3 SEPARATE COIN SIGNALS, 6 $345.00 C DIFFERENT COINS SET FOR HAMILTON HTK AUTO CASHIER WITH 75/150 CODE ANGLE X12SP5AC34F EAGLE OPTICAL ENCODED TOKEN XEPTOR RELAY OUTPUT 12VDC WITH 75/150 CODE ANGLE $269.67 C X12SP39C34F EAGLE OPTICAL ENCODED TOKEN XEPTOR RELAY OUTPUT 12VDC WITH 45/135 CODE ANGLE $269.67 C X12DM5AC34R XEPTOR SET UP FOR UNITEC “WASH SELECT II” WITH DIVERTER OUTPUT, 3 SEPARATE COIN $436.00 C SIGNALS, WIRING CONNECTIONS AND WITH COIN CREDIT OPTICS W/ 75/150 CODE X12DM39C34R XEPTOR SET UP WITH 39 CODE SET TO BE USED IN UNITEC “WASH SELECT II” W/ 45/135 CODE $436.00 C X12DM5AC36R XEPTOR SET UP FOR STANDARD CHANGER “GUARDIAN” WITH DIVERTER OUTPUT, 3 SEPARATE $436.00 C COIN SIGNALS, INHIBIT CIRCUIT AND WITH COIN CREDIT OPTICS WITH 75/150 CODE ANGLE X12DM39C36R XEPTOR SET UP FOR STANDARD CHANGER “GUARDIAN” WITH DIVERTER OUTPUT, 3 SEPARATE $436.00 C COIN SIGNALS, INHIBIT CIRCUIT AND WITH COIN CREDIT OPTICS WITH 45/135 CODE ANGLE X12SH5AC34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SETUP $345.00 C FOR HAMILTON HTK ACW WITH PLUG WITH 75/150 CODE ANGLE X12SH39C34A EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” SET UP W/ 39 CODE ANGLE SET FOR HAMILTON $345.00 C HTK W/COIN CREDIT OPTICS AND PLUG WITH 45/135 CODE ANGLE X12SG5AC34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SETUP $347.00 C FOR HAMILTON GOLD LINE ACW WITH PLUG WITH 75/150 CODE ANGLE X12SG39C34A EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” SET UP W/ 39 CODE ANGLE SET FOR GOLD LINE $347.00 C W/COIN CREDIT OPTICS AND PLUG WITH 45/135 CODE ANGLE X12CZ5AC34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SET UP FOR HAMILTON ACW4 WITH $347.00 C PLUG WITH 75/150 CODE ANGLE X12CZ39C34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SETUP $347.00 C FOR HAMILTON ACW4 WITH PLUG WITH 45/135 CODE ANGLE X12CB5AC34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH COIN CREDIT OPTICS SETUP $339.75 C FOR AMERICAN PAY STATION W/ CODE SET 75/150 X10CB39C34A AMERICAN PAY STATION MODEL WITH COIN CREDIT OPTICS SETUP W/ CODE SET 35/145 $339.75 C
ADDITIONAL OEM X12 MODELS ARE AVAILABLE CONTACT IDX
Page 13
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
ACCESSORIES FOR ALL IDX MULTI-COIN “XEPTORS”
PP-CWHR PERSONALITY PLUG FOR HAMILTON ACW WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” $13.25 C PP-CWR PERSONALITY PLUG WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” $9.93 C PP-CWRFRAG PERSONALITY PLUG FOR MA800 & X10 “XEPTORS” INSTALLED IN FRAGRAMATIC VAC WITH PLUG $13.25 C PP-CWRIVS PERSONALITY PLUG FOR MA800 & X10 “XEPTORS” INSTALLED IN IVS / GINSAN VAC WITH PLUG $13.25 C PP-CWR3 PERSONALITY PLUG DESIGNED Fragramatics FOR IDX MA800 & X10 “XEPTORS” WITH 3 WIRES $9.93 C PP-CWRL PERSONALITY PLUG WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” IN LAUREL VENDORS $13.25 C PP-CWRNRI3 PERSONALITY PLUG WITH 3 RELAY MODULE OUTPUT FOR IDX X10NR “XEPTORS” $210.00 C PP-CWRNRI6 PERSONALITY PLUG WITH 6 RELAY MODULE OUTPUT FOR IDX X10NR “XEPTORS” $210.00 C PP-MO PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” $13.25 C PP-MOB PERSONALITY PLUG TO BE USED IN AMERICAN “PAY STATION” WITH MA800 & X10 “XEPTORS” $13.25 C PP-MOSG PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” IN HAMILTON’S “GOLD LINE” $13.25 C PP-MOZ PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” IN HAMILTON’S ACW4 $13.25 C MA19 SNAPPY 2” SNAP-IN FACEPLATE FITS STANDARD 2” WIDE FOOTPRINT. REDUCES COIN JAMS FROM $41.85 B MISALIGNED METER BOX DOORS AND ACCEPTOR. ALLOWS THE OPERATOR TO REMOVE THE ACCEPTOR WITHOUT UNSCREWING THE XEPTOR” FROM THE METER DOOR. INTERCHANGES WITH MOST OTHER “MANUFACTURER’S ELECTRONIC ACCEPTORS. MA19-D SNAPPY 2” SNAP-IN FACEPLATE WITH COIN DIVERTER INSTALLED DIVERTS $71.85 B MA19-DR SNAPPY 2” SNAP-IN FACEPLATE WITH COIN DIVERTER INSTALLED ON UNITEC X10DM SERIES $71.85 B MA19-DIVITRFP DIVERTER PLATE FOR MA19-D & MA19-DR $5.82 B MA19-EXITCHUTE SNAP IN EXIT CHUTE FOR MA19, MA19-D, & MA19-DR $1.94 B MA19-INLETCHUT INLET CHUTE FOR MA19, MA19-D, & MA19-DR $3.64 B HT401 XEPTOR MOUNTING STUD ROUNDED SHOULDERS $1.15 C MLX10STOP THICKNESS CLIP FOR MA602, MA800 & X10 XEPTORS $3.43 C MA20 2” WIDE “OLD STYLE” FACEPLATE FOR X10, & MA800 “XEPTORS” $36.93 B MA20-C COIN CHUTE FOR MA20 OR MA19 FACEPLATE FOR METERS MB150 & MCD150 $6.08 B MA21 2” WIDE STAINLESS STEEL FACEPLATE FOR MA601 “XEPTORS” $36.12 B MB199-22 PLASTIC COIN CATCHER FOR MA19, MA20, & MA21 2” WIDE FACEPLATES $2.50 D
METER BOXES FOR VAULTS / SAFES PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824
MB100 COIN METER FOR SAFE- SIZE 8”W x 11”H x 5.75”D - FULLY WIRED, INDICATOR LIGHT, WITH 8 $349.00 B POSITION SELECTOR SWITCH, CAM LOCKS WITH 1 KEY, BACK PANEL DRILLED AND TAPPED FOR TIMER, COUNTER, HEATER OR LAST COIN ALERT. MBP100 COIN METER FOR SAFE- SIZE 8”W x 11”H x 5.75”D - TO BE USED WITH PIN LOCK FULLY WIRED, $434.00 B INDICATOR LIGHT, W/ 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED & TAPPED FOR TIMER, COUNTER, HEATER OR LAST COIN ALERT. MB150 BIG BOX COIN METER FOR SAFE – SIZE 9.5”W x 14H x 8”D – ERGONOMICALLY LAID OUT, FULLY $506.00 B WIRED, 8 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. MB155 BIG BOX COIN METER SAFE STYLE – SIZE 11.5”W x 15.5”H x 8”D – ERGONOMICALLY LAID OUT, $616.00 B FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS W/KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL ACCEPTOR. MB155V BIG BOX COIN METER FOR BILL ACCEPTOR SETUP FOR SAFE – SIZE 11.5”W x 15.5”H x 8” D– $684.00 B ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL ACCEPTOR.
Page 14
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
BIG TIME & GIGA TIME METER BOXES WITH HIGH SECURITY WRAP COMPLETELY WIRED TO TIMER, X10, 10 POSITION ROTARY AND DECAL VAULT READY METERS COMPLETE
MB160-BT BIG TIME COIN METER IS COMPLETE WITH BT912-M TWO TIMER, LC525 ALERT HORN, X10 COIN $1789.00 E XEPTOR, FULLY WIRED, 10 POSITION SELECTOR SWITCH, MB199-8 HEATER, ST301 SNUBBER TERMINAL, MULTI LANGUAGE INSTRUCTION DECAL, 10 GAUGE STAINLESS STEEL METER & DOOR, 2 PUCK STYLE LOCKS W/KEYS MOUNTED TO TILT DOWN SERVICE DOOR, 3/8” X 1 3/8” SECURITY WRAP, SIZE 21.875”W x 16.125”H x 8”D VAULT READY MB160-GT GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, LC525 ALERT HORN, X10 $1839.00 E COIN XEPTOR, FULLY WIRED, 10 POSITION SELECTOR SWITCH, MB199-8 HEATER, ST301 SNUBBER TERMINAL, MULTI LANGUAGE INSTRUCTION DECAL, 10 GAUGE STAINLESS STEEL METER & DOOR, 2 PUCK STYLE LOCKS W/KEYS MOUNTED TO TILT DOWN SERVICE DOOR, 3/8” X 1 3/8” SECURITY WRAP, SIZE 21.875”W x 16.125”H x 8”D VAULT READY
OPTIONS FOR MB160 METERS -12 REPLACE 2 STACK 10 POSITION ROTARY W 2 STACK 12 POSITION ROTARY & FUNCTION DECAL $310.53 E -BV CONVERT DOOR , DECAL AND WIRING TO ADD BILL ACCEPTOR $36.50 E -O ABOVE MB160 METER BOX WITHOUT WIRING & 10 POSITION ROTARY SWITCH <$64.00> E PS300 ELECTRONIC 10 POSITION ROTARY SWITCH $378.00 B MA72-P RELAY OUTPUT MODULE FOR P300 TO ADD 3RD STACK $33.50 C BCMEI2654 MEI 2600 SERIES 12VDC ACCEPT U.S. BILL $1, $5, $10, & $20 WITH 24VAC x12VDC POWER SUPPLY $557.00 A BCVL62R44US COIN CO VANTAGE SERIES BILL ACCEPTOR –24VAC- WILL ACCEPT U.S. BILLS $1, $5, $10, & $20 $449.00 A MA70-V ISOLATED 24VAC POWER SUPPLY AND DISABLE RELAY MODULE FOR BILL ACCEPTORS $33.50 C DEC160 MULTI LANGUAGE INSTRUCTION DECAL FOR MB160-BT & MB160-GT $49.42 B DEC160-BV BILL ACCEPTOR INSET FOR THE MB160 METERS $22.97 B SK NTS-COMBO IDX WIRE LESS CREDIT CARD AND FLEET CARD READER WITH WTRAM $899.00 E HAMIL 100-0127 HAMILTON DAN SYSTEM METER BOX CONTROLS MB155 & MCD155 SERIES ONLY $C/F A WASH GEAR WASH GEAR METER BOX CONTROLS MB150, MB155, MCD150, & MCD155 SERIES $C/F A N1 IRIS VPOS IN ONE TECHNOLOGIES COMBO READER ( MAG STRIP / EMV CHIP , PHONE PAY), CELLULAR $731.11 A TRANSMITTER PULSE INTERFACE & RFID/NFC READER CONNECTION VIA VERIZION, GSM (AT&T ROGERS & OTHERS), OR EITHERNET MB199-SWL-19R STAINLESS STEEL 19MM CANCEL BUTTON WITH WIRING FOR COUNTUP $59.95 E N1-IRIS WIRING WIRING HARNESS FOR PULSE OUT OR COUNT UP BETWEEN TIMER & CREDIT CARD READER $61.32 D MA79 RELAY MODULE TO CARRY LOAD IN COUNT UP MODE REQUIRED BY MOST OTHER CREDIT CARD $33.50 C SYSTEMS OR FOR INHIBIT ISOLATION IN AUTOMATICS
CASH DRAWER METER BOXES
MCD100 COIN METER WITH CASH DRAWER (HOLDS 700 COINS) – SIZE 8”W x 15.5”H x 5.75”D – FULLY WIRED, $567.00 B INDICATOR LIGHT, WITH 8 POSITION SELECTOR SWITCH, CAM LOCK AND KEY, BACK PANEL DRILLED & TAPPED FOR TIMER, COUNTER, HEATER, OR LAST COIN ALERT. ALSO INCLUDES SCREW LOCK FOR CASH DRAWER AND KEY. MCDP100 COIN METER W/ PIN LOCK CASH DOOR (HOLDS C0INS) & CAM LOCK SERVICE DOOR FULLY WIRED, $546.00 B INDICATOR LIGHT 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED & TAPPED FOR TIMER, COUNTER, HEATER, OR LAST COIN ALERT. PIN LOCK (MB199-7) NOT INCLUDED– SIZE 8” x 15.5” x 5.75”. MCD150 BIG BOX COIN METER W/CASH DRAWER (HOLDS 2800 COINS) – SIZE 9.5”W x 20”H x 8D” – INCLUDES $742.00 B SERVICE DOOR, SECURITY BAR OVER CASH DRAWER SCREW LOCK W/ 1 KEY, & HIGH SECURITY PUCK LOCK W/KEYS, 2 CAM LOCKS W/KEYS ON SERVICE DOOR, ERGONOMICALLY LAID OUT, FULLY WIRED, 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED AND TAPPED FOR COUNTER, HEATER & LAST COIN ALERT. HINGED LIFT OUT SERVICE DOOR W/ MOUNTING HOLES FOR PS200
Page 15
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
CASH DRAWER METER BOXES
MCD155 BIG BOX COIN METER WITH CASH DRAWER (HOLDS 4,000 COINS) – SIZE 11.5”W x 21.75”H x 8”D $967.00 B ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON CASH DRAWER, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR P300 MCD155V BIG BOX COIN METER FOR BILL ACCEPTORS W/CASH DRAWER (HOLDS 4,000 COINS) $1015.00 B – SIZE 11.5”W x 21.75”H x 8”D – SERVICE DOOR WITH SHROUD TO PROTECT BILL ACCEPTOR. ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON CASH DRAWER, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR PS200
OPTIONAL MODIFICATION FOR METER BOXES (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER) -3 REPLACE 2-STACK 8 POSITION ROTARY (MB199-2M) WITH 3 STACK 8 POSITION ROTARY SWITCH $C/F B (MB199-3M) -10 REPLACE 8-POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 2 STACK ROTARY & $75.58 B 16 LUG TERMINAL -13 REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 3 STACK SWITCH & $151.53 B 16 LUG TERMINAL THE ABOVE OPTIONS AVAILABLE ON MBWH WIRING HARNESS ONLY
-C STAINLESS STEEL WELDED COLLAR FOR METER BOXES $46.15 B -D DIXMOR TIMER HOLE IN SERVICE DOOR $24.43 B -G GIGA TIME HOLE IN SERVICE DOOR ON MB155, MBW155, MCD155, MCD155W ONLY $18.46 B -L LITTLE TWO TIMER HOLE IN SERVICE DOOR $18.46 B -O ABOVE 100 & 150 METER BOXES WITHOUT WIRING OR 8 POSITION ROTARY SWITCH <30.77> B -O ABOVE 155 SERIES OF METER BOXES WITHOUT WIRING OR 10 POSITION ROTARY SWITCH <64.00> B -T TIME MASTER HOLE IN SERVICE DOOR WITH STAINLESS STEEL BRACKET $24.43 B
(TO SPECIFY AN ACCESSORY, ADD APPROPRIATE MODEL NUMBER AS A SEPARATE LINE ITEM) MBLTT LITTLE TWO TIMER HOLE IN SERVICE DOOR (SPECIALS) $18.46 B MBTM5W SMALL TIME MASTER WINDOW $12.00 B MBTM5B BRACKET USED FOR MOUNTING TIME MASTER ON SERVICE DOOR $12.61 B MBTM5H HORN FOR TIME MASTER $23.00 B MBXH LIGHT AND HOLE FOR X-TRA TIME $10.00 B PS300 PermaSwitch™ PS300 10 POSITION ELECTRONIC SWITCH INTERCHANGEABLE W/ ROTARY SWITCH $378.00 B MA72-P RELAY OUTPUT MODULE FOR PS300 $33.50 C
**NEW** HIGH SECURITY METER BOXES WITH HEAVY DUTY WRAP
COMPLETELY WIRED TO GIGA TIME 1200 TIMER, LAST ALERT HORN X12, HEATER, SNUBBER TERMINAL AND CUSTOM DECAL PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824
ROTARY SWITCH VAULTED READY HIGH SECURITY MODLES
MB165 HIGH SECURITY METER IS COMPLETE W/ GIGA TIMER 1200 MULTI TIME TIMER, SCROLLING SERVICE $1750.00 E MESSAGES, LC525 ALERT HORN, X12 COIN XEPTOR, FULLY WIRED, W/ 8 POSITION ROTARY, SWITCH, SNUBBER TERMINAL HEATER, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER AND TILT DOWN SERVICE DOOR, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON SERVICE DOOR WITH HIDDEN HINGE, 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 28” H x 8”D VAULT READY MB165-10 SAME FEATURES AS MB165 WITH 10 POSITION ROTARY SWITCH $1839.00 E MB165-12 SAME FEATURES AS MB165 WITH 12 POSITION ROTARY SWITCH $2152.00 E
Page 16
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
**NEW** HIGH SECURITY METER BOXES WITH HEAVY DUTY WRAP
COMPLETELY WIRED TO GIGA TIME 1200 TIMER, LAST ALERT HORN X10, HEATER, SNUBBER TERMINAL AND CUSTOM DECAL PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824
LIGHTED PUSH BUTTON VAULTED READY
MB165-10P GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, LC525 ALERT HORN, X12 $2634.00 E COIN XEPTOR, FULLY WIRED, W/ 10 LIGHTED S/S PUSH BUTTONS , MUX BOARD , SWITCH BOARD, HEATER, ST301 SNUBBER TERMINAL, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON TILT DOWN SERVICE DOOR WITH HIDDEN HINGE, 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 28” H x 8”D VAULT READY MB165-11P SAME FEATURES AS MB165-GT 10P BUT WITH 11LIGHTED S/S PUSH BUTTONS $2722.00 E MB165-12P SAME FEATURES AS MB165-GT 10P BUT WITH 12LIGHTED S/S PUSH BUTTONS $2809.00 E
**NEW** HIGH SECURITY CASH DRAWER METER
BOXES WITH HEAVY DUTY WRAP COMPLETELY WIRED TO GIGA TIME 1200 TIMER, LAST ALERT HORN X12, HEATER, SNUBBER TERMINAL AND CUSTOM DECAL ROTARY SWITCH CASH DRAWER METER BOXES
MCD165 GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, SCROLLING SERVICE $2344.00 E MESSAGES, LC525 ALERT HORN, X12 COIN XEPTOR, FULLY WIRED, WITH 8 POSITION 2 STACK ROTARY SWITCH, SNUBBER TERMINAL, HEATER, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON TILT DOWN SERVICE DOOR WITH HIDDEN HINGE, CASH DRAWER WITH AMERICAN LOCK & WELDED SECURITY RING (HOLDS 6,000+ COINS) 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 34.25” H x 8”D MCD165-10 SAME FEATURES AS MCD165 BUT WITH 10 POSITION ROTARY SWITCH $2423.00 E MCD165-12 SAME FEATURES AS MCD165 BUT WITH 12 POSITION ROTARY SWITCH $2736.00 E LIGHTED PUSH BUTTON HIGH SECURITY CASH DRAWER MODLES
MCD165-10P GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, LC525 ALERT HORN, X12 $3138.00 E COIN XEPTOR, FULLY WIRED, WITH 10 LIGHTED S/S PUSH BUTTONS , MUX BOARD , SWITCH BOARD, HEATER, ST301 SNUBBER TERMINAL, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON TILT DOWN SERVICE DOOR WITH HIDDEN HINGE, CASH DRAWER WITH AMERICAN LOCK AND WELDED SECURITY RING (HOLDS 6,000+ COINS) 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 34.25” H x 8”D MCD165-11P SAME FEATURES AS MB165-GT 10P BUT WITH 11LIGHTED S/S PUSH BUTTONS $3226.00 E MCD165-12P SAME FEATURES AS MB165-GT 10P BUT WITH 12LIGHTED S/S PUSH BUTTONS $3314.00 E
OPTIONS 165 METERS
-V CNEWONVERT DOOR, DECALE AND WIRING TO ADD BILL ACCEPTOR $46.50 E -S UP GRADER WITH HIGH SECURITY STAINLESS STEEL PUCK LOCK EACH $72.96 E
SPECIAL 2 YEAR WARRANTY AVAILABLE ON ALL IDX ELECTRONICS WITH MB160, MB165 & MCD165 METERS. ** OTHER SIZES & OPTIONS AVAILABLE - CONSULT IDX**
Page 17
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
METER BOX ACCESSORIES
MSD100 REPLACEABLE SERVICE DOOR FOR MB & MCD METER BOXES WITH 1 CAM LOCK 7.875”W x 10.875”H $98.58 E MSDP100 REPLACEABLE SERVICE DOOR FOR MBP, MCDP, OR MCDA METER BOXES. LOCK NOT INCLUDED. $96.44 E MSD150 REPLACEABLE SERVICE DOOR FOR MB150 METER BOX. INCLUDES 2 CAM LOCKS. 9.25” x 13.75” H $143.65 E
MSD155 REPLACEABLE SERVICE DOOR FOR MB155 METER BOX. INCLUDES 2 CAM LOCKS. 11.125 ”W x 15.25”H $165.05 E
MSD155V REPLACEABLE SERVICE DOOR FOR MB155 BILL ACCEPTOR METER BOX. INCLUDES 2 CAM LOCKS. $241.83 E MSD155V-1 REPLACEABLE SERVICE DOOR FOR MB155 BILL ACCEPTOR METER BOX.WITH VALADATOR COVER $241.83 E INCLUDES 2 CAM LOCKS MSD155-VA-LOCK- SECURITY BAR DOOR LOCK KIT FOR MB155V METERS USED WITH PUCK STYLE LOCK IDX PART # $99.83 A KIT MB199-13M (LOCK NOT INCLUDED) MSD160-BT REPLACEABLE SERVICE DOOR FOR MB160 METER BOX. INCLUDES 2 PUCK LOCKS. 21.375”W x
15.875”H $374.71 E MSD160-GT REPLACEABLE SERVICE DOOR FOR MB160 METER BOX. INCLUDES 2 PUCK LOCKS. $351.13 E MSD165 REPLACEABLE SERVICE DOOR -MB165 FOR ROTARY SWITCH METER BOX. W/ 2 PUCK LOCKS. $358.90 E MSD165-10P REPLACEABLE SERVICE DOOR FOR MB165-10 PUSH BUTTON METER BOX. W/ 2 PUCK LOCKS. $377.36 E MSD165-12P REPLACEABLE SERVICE DOOR FOR MB165-12 PUSH BUTTON METER BOX. W/ 2 PUCK LOCKS. $377.36 E
MSD165-10P ASSY REPLACEABLE SERVICE DOOR FOR MB165-10P W/10 PUSH BUTTONS, GT 200MUX, GT 200 MSB, X10, $1859.00 E
ALERT HORN, HEATER WIRING , CUSTOM DECAL AND LESS TIMER MSD165-12P ASSY REPLACEABLE SERVICE DOOR FOR MB165-12 W/12 PUSH BUTTONS, GT 200MUX, GT 200 MSB, X10, $1966.80 E ALERT HORN, HEATER WIRING , CUSTOM DECAL AND LESS TIMER
MBS SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB100 METER BOX – SIZE 8”Hx11”Wx5.75” $208.29 E
MBPS SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MBP100 METER BOX FOR PIN LOCK $272.19 E SIZE 8”W x 11”H x 5.75”D MBS150 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB150 METER BOX – SIZE 9.5”H x14”W x 8” $315.00 E MBS155 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB155 & MB155V METER BOXES $413.04 E SIZE 11.25”W x 15.5”H x 8”D MBS155W SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB155 & MB155V METER BOXES $483.43 E SIZE 11.25”W x 15.5”H x 8”D WITH 3/8” SECURITY WRAP MBS160 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB160 METER BOXES & IDX REVALUE $742.86 E KIOSK. SIZE 21.875” W x 16.063” H x 8” D WITH 3/8” x 1 3/8” SECURITY WRAP MBS165 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB165 METER BOXES & IDX REVALUE $787.15 E KIOSK. SIZE 16.125” W x 21.875H x 8” D WITH 3/8” x 1 3/8” SECURITY WRAP MCDS SHELL WITH CD (CASH DRAWER) & CAM LOCK ONLY, LESS SERVICE DOOR & WIRING HARNESS $414.50 E FOR MCD METER BOX. SIZE 8”W x 15.5”H x 5.75”D MCDPS SHELL WITH VDP (VAULT DOOR) ONLY- LESS PIN LOCKS, LESS SERVICE DOOR & WIRING HARNESS $410.89 E FOR MCDP METER BOX SIZE 8”W x 15.5”H x 5.75”D MCDS150 SHELL & CASH DRAWER (CD150) LESS PUCK LOCK, SECURITY BAR, SERVICE DOOR & WIRING $570.83 E HARNESS FOR MCD150 METER BOX SIZE 9.5” W x 20”H x 8”D MCDS155 SHELL W/ CASH DRAWER & PUCK LOCK, LESS SERVICE DOOR & WIRING HARNESS FOR MCD155 $692.06 E OR MCD155V METER BOX. SIZE 11.25”W x 21.5”H x 8”D MCDS165 SHELL W/ CASH DRAWER & PUCK LOCK, LESS SERVICE DOOR & WIRING HARNESS FOR MCD165 $1067.80 E OR MCD165V METER BOX. SIZE 16.125”W X 34.25”H x 8”D MBWH WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 2 STACK ROTARY SWITCH $78.42 B MBWH-10 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH $98.35 B MBWH-10/3 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 3 STACK ROTARY SWITCH $155.89 B MBWH-150 WIRING HARNESS FOR 150 SERIES METER BOXES WITH 8 POSITION 2 STACK ROTARY SWITCH $90.35 B MBWH-150/10 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 2 STACK ROTARY SWITCH $101.55 B MBWH-150/10/3 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 3 STACK ROTARY SWITCH $169.57 B MBWH-150/12 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/12 POSITION 2 STACK ROTARY SWITCH $365.23 B
Page 18
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
METER BOX ACCESSORIES
MBWH-150/3 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/8 POSITION 3 STACK ROTARY SWITCH $116.56 B MBWH-160/10 WIRING HARNESS FOR 160 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH & $143.58 B ST301 SNUBBER TERMINAL MBWH-160/12 WIRING HARNESS FOR 160 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH & $410.52 B ST301 SNUBBER TERMINAL MBWH-PUSH WIRING HARNESS FOR 19MM LIGHTED PUSH BUTTON SWITCH $13.25 B BUTTON WIRING MBWH-3 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 3 STACK ROTARY SWITCH $134.49 B MBWH-PS WIRING HARNESS FOR 100 SERIES METER BOXES WITH PS200 ELECTRONIC SWITCH $59.04 B N1-IRIS WIRING PULSE / COUNT UP WIRING HARNESS FOR METERS $61.35 B MCB ***DISCONTINUED* CD SCREW LOCK CASH DRAWER FOR MCD100 METER BOX WITH SCREW LOCK $81.14 B VDP VAULT DOOR FOR MCDP100 PIN LOCK METER BOX $73.60 B VAL PUCK LOCK VAULT DOOR FOR MCDA100 METER BOXES ROUND COVER $81.14 B CD150 SCREW LOCK CASH DRAWER WITH LOCK FOR MCD150 METER BOX $122.18 B CD155 PUCK LOCK CASH DRAWER WITH PUCK LOCK FOR MCD155 AND MCD155V METER BOX $281.71 B CD165 PUCK LOCK CASH DRAWER WITH PUCK LOCK FOR MCD165 AND MCD165V METER BOX $323.30 B MSD155-VA-LOCK- SECURITY BAR DOOR LOCK BAR FOR MB155V METERS USED WITH STYLE LOCK (LOCK NOT $99.83 A KIT INCLUDED)
SAFES
KEYLESS & KEY STYLE SAFES
WS1 ELECTRONIC STAINLESS STEEL SAFE. DOOR HAS NO LOCKS TO OIL, OR KEYS TO LOSE. $599.00 A BREAKAWAY HANDLE. 3/8” THICK STAINLESS STEEL DOOR ATTACHED TO REMOVABLE CASH DRAWER (HOLDS 5000+ COINS - $1,250.00). SIZE 8”H x 8” W x 12”D WITH 8”H x 12” W PLATE WS1-DRAWER STAINLESS STEEL SAFE DRAWER FOR WS1 $315.50 A WS1-SHELL STAINLESS STEEL SHELL WITH ELECTRONICS FOR WS1 SAFE $336.00 A WS1-SOLENOID 12VAC SOLENOID FOR WS1 SAFE $59.97 A WS1-POWER 24VAC TO 12 VDC 3AMP FOR WS1-SOLENOID $62.97 A CONVERTER MB199-23 ELECTRONIC KEY SWITCH LOCK – N/O CONTACTS- WITH 2 KEYS $74.99 A MODEL #WS1
Page 19
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
DIGITAL CLOCK TIMER FOR METER BOXES “CARD DISPLAY PROTOCOL™” STANDARD, U.S. PATENT #5,371,681 OBSOLETE LITTLE TWO TIMER™
LTT802 LITTLE TWO TIMER *** OBSOLETE *** REPLACED WITH GT 200 LTT802-HP LITTLE TWO TIMER *** OBSOLETE *** REPLACED WITH GT 200
LTT802-FHP LITTLE TWO TIMER *** OBSOLETE *** REPLACED WITH GT 200 GIGIA TIME™ GT 200 THE NEW GIGA TIMER GT200 IS A COMPACT DIRECT FIELD REPLACEMENT MULTI-FEATURE $299.96 E
DISPLAY TIMER WHICH HAS MANY FEATURES INCLUDING INDUSTRY STANDARD METER BOX FOOT PRINT, MULTI-VALUE TIMING W/ COUNT-DOWN OR UP MODE, IDX “CARD-DISPLAY PROTOCOL” & IDX PATENTED TWO TIME SELECT FEATURE. THIS NEW MODEL EXHIBIT’S 20% + REDUCTION IN POWER CONSUMPTION OVER THE LTT802 SERIES AND SIMILAR DISPLAY TIMERS. 2-YEAR WARRANTY ON STANDARD HIGH OUTPUT LEDS. - ALL WITH 3 BRIGHTNESS SETTINGS THAT ARE FIELD PROGRAMMABLE. THE LED’S BRIGHTEN UP WHEN THE TIMER SCENES COIN ACTIVITY AND AT THE LAST MINUTES OF TIME. THE 3 FIELD PROGRAMMABLE MESSAGES HAVE BEEN EXPANDED TO 127 CHARACTERS EACH. MONETARY VALUES ARE SELECTED DURING PROGRAMMING FROM $ or € AND COIN BASE IS 0.05 / 0.25 / 0.50 / 1.00. STANDARD OPERATING VOLTAGE IS 24VAC / 12VDC / 12VAC / 24VDC / 34VDC WITH A 3 AMP FUSED RELAY OUTPUT. HORN OUTPUT SELECTABLE EITHER 10 SECONDS OR FOR THE FULL LAST MINUTE. ACCOUNTING FEATURES ARE TOTAL COIN COUNT, TOTAL RUN TIME SEPARATED BY THE 2 TIME SELECT MODE “A” & “B” TIMES. SIZE 3.35”W x 3.80”H x 3.15”D
GT 200-A GT 200 TWO TIMER W/ PATENT PENDING “LUCKY TIME”, LATCH / UNLIMITED TIME PROGRAM $374.96 E INCLUDES THE DISABLE FEATURE COIN /BILL ACCEPTOR WHILE IN THE UNLIMITED MODE OR
IF OUTPUT FAILS. ADDITIONAL INPUTS ARE BILL ACCEPTANCE, CREDIT CARD PULSE, 4 TIME INPUT SERVICES, WITH 2 OPTIONAL INPUTS FOR SPECIAL FEATURES. ADDITIONAL ACCOUNTING FEATURES - TOTAL BILL COUNTS IN DOLLARS, TOTAL CREDIT CARD COUNTS IN DOLLARS & CENTS AND TOTAL TIME FOR EACH OF THE ADDITIONAL SERVICES FEATURES IN HOURS & MINUTES.
**SPECIAL** GIGA TIMER DIGITAL CLOCK TIMERS FOR METER BOXES
GT 200-NP GT 200 TWO TIMER WITH SPECIAL CREDIT CARD AND GT200 MUX PROTOCOLL TO BE USED WITH $399.97 E IDX GT 200-NP MUX PUSH BUTTON METER CONTROLS *** AVAILABLE FROM OEM’S ONLY*** PUSH BUTTON CONTROLS GT 200 MUX MULTI PLES ASSLEMABLY FOR UPTO 12 LIGHTED PUSH BUTTONS WITH 13 RELAY OUTPUTS, $365.00 E FOR 12 SERVICE FUNCTIONS AND 1 MOTOR STARTER- PROGRAMMED WITH DIP SWITCHS, SERVICE MONITORING CONNECTION TO USE DIFFERENT TIMERS DISPLAY & NON DISPLAY & OTHER MFGS
GT 200 NP MUX OEM MULTI PLES ASSLEMABLY TO BE USED WITH GT 200-NP TIMER WITH SERIAL CONNECTIONS $374.96 E BETWEEN PUSH BUTTON BOARD AND TIMER. WILL DISPLAY SERVICE MESSAGES FOR EACH PUSH BUTTON, ALLOW FOR LESS WIRING IN BAYS SINCE ONLY POWER & COIN ACCEPTOR WIRES NEED IN METER BOX BOARD ALONG WITH 1 DATA CABLE *** AVAILABLE FROM OEM’S ONLY*** GT 20 MUX “IO” MODULE WITH 20 INPUTS & 22 RELAY OUTPUTS THAT CAN BE USED FOR EXSPANDED PUSH BUTTON $525.00 E METER BOX TO OFFER PREMIUN SERVISES OR INDUSLTRIAL APLICATIONS WITH SERIAL INPUTS AND OUTPUTS GT 200 M-BOX SWITCH BOX ONLY FOR GT 200 MUX $331.66 E GT 200 MSB SWITCH BOARD FOR GT 200 MUX & GT 200-NP MUX WITH 12 BUTTON CONNECTORS & SERIAL CONNECTOR $75.00 E *** CONSULT FACTORY FOR DIFFERENT CONFIGUARATIOND***
Page 20
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
Giga Time™ U.S. PATENT #5,371,681
ULTIMATE IN MULTI TIME DISPLAY TIMERS FOR METERS OR VACUUMS
GIGA TIMER-1200 GIGA TIME IS THE ULTIMATE IN MULTI TIME TIMER TECHNOLOGY. SUPER ULTRA BRIGHT RED LEDS, $594.24 E 1”H x 5.5”W OPENING EASIER TO READ SCROLLING LETTERS BECAUSE OF THE DUAL ROW LED LETTERING, 4 STANDARD SETTINGS FOR TIME AND/OR COINS ON 4 DIFFERENT SERVICE INPUTS, 2 OPTIONAL TIME/COIN PROGRAMMING SETTINGS, 12 PROGRAMMABLE SERVICES 30 CHARACTER SERVICE MESSAGES, SERVICES LIKE “WASH / RINSE / TRIPLE FOAM / etc”, GIGA TIME – “LATCH TIME, BONUS TIME, UNLIMITED TIME, MEGA TIME” WHAT EVER NAME YOU CALL IT, “LUCKY TIME™” PROGRAM, COIN IN BEEP, PROGRAMMABLE LENGTH ON LAST COIN ALERT FROM 1 SECOND TO THE FULL LAST “CARD DISPLAY PROTOCOL”™, 1 COIN &/OR TOKEN INPUT, 1 BILL INPUT, SEPARATE RETRIEVABLE COUNTS, HORN OUTPUT, REMOTE RESET INPUT WIRE, CREDIT CARD SERIAL PORT, PROGRAM PORT FOR RC800 REMOTE OR WT RAM , SIZE 3.125”H x 5.875”W X 1.78”D.
ACCESSORY MODULES FOR GIGA TIMER GT1200 & GT200
LC LAST ALERT HORN MULTI VOLTAGE 9-34 AC/DC 2-YEAR WARRANTY $41.67 C LC521-AC LAST MINUTE ALERT PLUG-IN TYPE, USES DS508 SOCKET (A/C TYPE FOR 24VAC ONLY) $80.00 C DS508 PLUG IN BASE FOR LC521-AC HORN $5.83 C LC525-AC SAME AS LC521-AC W/ NO PLUG-IN HOUSING. INCLUDES “L” BRACKET FOR MOUNTING. $41.67 C ACCESSORY PARTS FOR LTT802, GIGA TIMER GT1200 & GT200
GIGA -1200MP STAINLESS STEEL MOUNTING PLATE SIZE 3.125”H x 6.94”W $11.69 B GIGA –WHP1 GIGA TIMER #1 POWER WIRING HARNESS $16.59 C GIGA –WHP2 GIGA TIMER #2 POWER WIRING HARNESS $16.59 C GIGA –WHP3 GIGA TIMER #3 POWER WIRING HARNESS $16.59 C GIGA –WHP4 GIGA TIMER #4 POWER WIRING HARNESS $16.59 C GIGA TIMER-13 GIGA TIMER RED ENCLOSURE LESS MOUNTING BRACKET $40.95 C LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR & CAM LOCK SIZE – 6” H x 5 .563” W x 5” D $100.00 B LTT10 RED ACRYLIC LENS FOR FACE OF THE LTT800 & LTT802 $4.95 C LTT11 LTT HOUSING – COMPLETE (RED LEXAN®) $10.00 C LTT11-FC LTT HOUSING FRONT COVER WITH 4 POSTS (RED LEXAN) $6.66 C LTT11-H LTT HOUSING LESS FRONT COVER (RED LEXAN) $8.33 C LTT20 EEPROM WITH MESSAGE PLUG-IN $25.00 E LTT30 MICROPROCESSOR CHIP FOR LTT800 & LTT802 $91.33 E LTT41-P1 WIRING HARNESS FOR P-1 HOOK-UP ON LTT SERIES $15.31 B LTT41-P3 WIRING HARNESS FOR P-3 HOOK-UP ON LTT SERIES WITH DISABLE (-D) OPTION $15.31 B GT41-P3 WIRING HARNESS FOR P-3 HOOK-UP ON GT 200-A / GT200-NP TIMERS $16.85 B LTT51 HIGH OUTPUT LED SEGMENT FOR LTT800 & LTT802 $21.67 C MENGT-5A 5 AMP OUTPUT FUSE FOR GT 200 SERIES $1.49 A
GT200
Page 21
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
SPARE PARTS FOR METER BOXES MB199-S STAINLESS STEEL SECURITY BAR FOR MB100, MBP100, MCD100, & MCP100 METER BOXES $23.08 B MB199-S150 STAINLESS STEEL SECURITY BAR FOR MB150 & MCD150 METER BOXES $24.36 B MB199-S155 STAINLESS STEEL SECURITY BAR FOR MB155, MCD155, MB155V, & MCD155V METER BOXES $27.22 B MB199-S155W STAINLESS STEEL SECURITY BAR FOR MB155W, MCD155W, MB155WV, & MCD155WV METER BOXES $32.54 B MB199-2M METAL 2 STACK 8 POSITION ROTARY SWITCH $73.39 B MB199-2M10 METAL 2 STACK 10 POSITION ROTARY SWITCH $119.00 B MB199-2M12 METAL 2 STACK 12 POSITION ROTARY SWITCH $275.53 B MB199-3M METAL 3 STACK 8 POSITION ROTARY SWITCH $84.38 B MB199-3M10 METAL 3 STACK 10 POSITION ROTARY SWITCH $129.95 B MB199-3 TUBULAR CAM LOCK WITH 1 KEY $18.16 A MB199-3K KEY FOR TUBULAR CAM LOCK $6.67 A MB199-3S MEDICO TUBULAR CAM LOCK WITH 1 KEY FOR HIGHER SECURITY $60.27 A MB199-3V TUBULAR CAM LOCK WITH 1 KEY AND SPECIAL KEY NUMBERS $18.16 A MB199-4 TUBULAR SCREW LOCK WITH 1 KEY $22.27 A MB199-4K KEY FOR TUBULAR SCREW LOCK $6.67 A MB199-4-150 LONG SHANK TUBULAR SCREW LOCK WITH 1 KEY FOR MCD150 $22.27 A ***FOR SPECIAL ORDER KEY NUMBERS OR LOCKS ADD $5.00 EACH*** $5.00 NET MB199-4N NUT & CLIP TO BE MOUNTED IN METER BOX FOR SCREW LOCK $2.30 D MB199-7 WILSON BUCHANAN PIN LOCK WITH 1 KEY $22.84 A MB199-7K KEY FOR WILSON BUCHANAN PIN LOCK $6.67 A MB199-8 HEATER, 24 VAC, 25 WATTS $12.50 D MB199-9 12 LUG TERMINAL STRIP 20 AMP $4.54 D MB199-10 18 LUG TERMINAL STRIP 20 AMP $6.50 D MB199-12 POINTER KNOB FOR 8 OR 10 POSITION ROTARY SWITCHES $3.85 D MB199-13 AMERICAN LOCK 2000 SERIES WITH 2 KEYS $45.30 A MB199-13I AMERICAN LOCK INSERT WITH 2 KEYS $22.83 A MB199-13K KEY FOR AMERICAN LOCK 2000 SERIES (SPECIAL ORDER) $5.00 A MB199-13M AMERICAN LOCK 2000 SERIES MOUNTED ON METER BOX $53.31 A MB199-13SS STAINLESS STEEL HIGH SECURITY PUCK STYLE LOCK WITH 2 KEYS $114.30 A MB199-17 MEDICO LOCK WITH 1 KEY (PLUG ONLY) C/F A MB199-17K MEDICO KEY FOR MB199-17 (PLUG LOCK) $8.46 A MB199-18 MEDICO SCREW LOCK WITH 1 KEY C/F A MB199-19A AMBER INDICATOR LIGHT 120VAC $4.71 B MB199-19G GREEN INDICATOR LIGHT 120 VAC $4.71 B MB199-19R RED INDICATOR LIGHT 120 VAC $4.71 B MB199-20A AMBER INDICATOR LIGHT 24 VAC $3.30 B MB199-20G GREEN INDICATOR LIGHT 24 VAC $3.30 B MB199-20R RED INDICATOR LIGHT 24 VAC $3.30 B MB199-22 PLASTIC COIN CATCHER $2.50 B MB199-23 ELECTRONIC KEY SWITCH LOCK – N/O CONTACTS- WITH 2 KEYS $74.95 A MB199-51 CONTROL CABLE / 2-TWISTED PAIRS OF SHIELDED ALL COPPER CABLE sold by the foot $1.16 A PUSH BUTTONS LIGHTED
MB199-PRW-16G 16 MM GREEN LIGHTED S/S PUSH BUTTON W/WIRES & CONNECTOR FOR GT-PUSH BUTTON BOARD $23.08 D MB199-PRW-16R 16 MM RED LIGHTED S/S PUSH BUTTON W/WIRES & CONNECTOR FOR GT-PUSH BUTTON BOARD $29.23 D MB199-SWL19G 19 MM GREEN LIGHTED S/S PUSH BUTTON PUSH ON OR SOLDER ENDS $59.95 D MB199-SWL19R 19 MM RED LIGHTED S/S PUSH BUTTON PUSH ON OR SOLDER ENDS $59.95 D MBWH-PUSH WIRING HARNESS FOR 19MM LIGHTED PUSH BUTTON SWITCH $13.25 B BUTTON WIRING
MBI99-26 12 LUG TERMINAL STRIP 30 AMP $9.99 A MB199-28 16 LUG TERMINAL STRIP 30 AMP $14.06 A ST1.0 1.0 µF AND 4.7 OHM ¼ WATT RESISTOR $1.00 C ST022 .022 µF AND 100 OHM ¼ WATT RESISTOR $1.00 C ST047 .047 µF AND 20 OHM ¼ WATT RESISTOR $1.00 C ST39 SNUBBER TERMINAL $1.00 C ST100 12 POSITION TERMINAL BLOCK WITH BUILT IN SNUBBERS TO ELIMINATE VOLTAGE SPIKING $28.95 C ST300 16 POSITION TERMINAL BLOCK WITH BUILT IN SNUBBERS TO ELIMINATE VOLTAGE SPIKING $39.95 C ST301 SAME AS ST300 PLUS COIN SIGNAL BLOCK ON BILL ACCEPTOR LINE FOR VAC UP SYSTEMS $42.28 C ST316 16 POSITION TERMINAL BLOCK WITH 16 SNUBBERED TERMINALS $48.95 C ST500 BLUE VARISTOR CLAMP OFF AT 130 $1.00 C ST510 RED VARISTOR CLAMP OFF AT 390 $1.00 C CP105 1.0 µF 250 VOLT CAPACITOR $1.00 C
DECALS FOR METER BOXES
DEC100 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 8 POSITION SWITCH $55.39 A DEC100-10 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $55.39 A DEC100-C CUSTOM DECALS FOR THE MB100 / MBP100 /MCD100 / MCDP100 METER BOXES $55.39 A DEC150 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 8 POSITION SWITCH $64.62 A DEC150-10 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $64.62 A DEC150-C CUSTOM DECALS FOR THE MB150 / MCD150 METER BOXES $69.79 A DEC155 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $69.79 A FOR MB155, MB155W & MCD155 METERS DEC155V MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $69.79 A
& BILL ACCEPTOR FOR MB155V, MB155WV & MCD155V METERS DEC155-VPET MULTI COLORED FULL FACE SERVICE DOOR DECAL FOR MCD155V METER SET UP FOR PET WASH $69.79 A DEC155-C CUSTOM DECAL FOR THE MB155 / MB155V / MCD155 /MCD155V METER BOXES $72.87 A DEC160 MULTI LANGUAGE INSTRUCTION DECAL FOR MB160-BT & MB160-GT $69.79 A DEC160-BV BILL ACCEPTOR INSET FOR THE MB160 METERS $22.97 A DEC165-C CUSTOM DECAL FOR MB165 METERS $C/F A DEC315 CUSTOM NAME INSERTS FOR DEC100, DEC150 & DEC155 $C/F A (300 PIECES MINIMUM ORDER PLUS ONE TIME ART/PLATE CHARGE OF $150.00) DECPS200 MULTI COLORED PermaSwitch PS200® DECAL WITH SERVICE SPOTS ONLY $21.97 A MB199-15 SET OF CIRCULAR SPOTS & PRICES FOR MB199-14 AND MB199-14L $28.20 A MB199-16 SET OF CIRCULAR SPOTS & PRICES FOR DEC100, DEC150, DEC155, & DEC200 $27.23 A BS WR2 WICKET METER BOX DECAL “ TAP CARD HERE” SIZE 1.5” x 1.5” $2.58 D BS200/15 SET OF 15 CIRCULAR SPOTS (0.65”) FOR DECPS200 $13.84 A BS200-WS 0.65” ORANGE “WASH/SOAP” SPOT FOR METER DECALS $0.96 A BS200-ABD 0.65” BLUE “AIR BLOW DRY” SPOT FOR METER DECALS $0.96 A BS200-RN 0.65” WHITE “RINSE” SPOT FOR METER DECALS $0.96 A BS200-HW 0.65” GREEN “HIGH PRESSURE WAX” SPOT FOR METER DECALS $0.96 A BS200-CCP 0.65” GREEN “CLEAR COAT PROTECTANT” SPOT FOR METER DECALS $0.96 A BS200-FW 0.65” GREEN “LOW PRESSURE FOAM WAX” SPOT FOR METER DECALS $0.96 A BS200-OFF 0.65” RED “OFF” SPOT FOR METER DECALS $0.96 A BS200-STP 0.65” RED “STOP” SPOT FOR METER DECALS $0.96 A BS200-ET 0.65” YELLOW “ENGINE/TIRE CLEANER” SPOT FOR METER DECALS $0.96 A BS200-EC 0.65” YELLOW “ENGINE CLEANER” SPOT FOR METER DECALS $0.96 A BS200-TC 0.65” YELLOW “TIRE CLEANER” SPOT FOR METER DECALS $0.96 A BS200-FB 0.65” BLUE “FOAM BRUSH” SPOT FOR METER DECALS $0.96 A BS200-PS 0.65” PINK “PRESOAK” SPOT FOR METER DECALS $0.96 A BS200-SFR 0.65” ROSEMAN RED “SPOT FREE RINSE” SPOT FOR METER DECALS $0.96 A
Page 23
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
DECALS FOR METER BOXES
BS200-MCB 0.65” BLUE “MULTI-COLOR FOAM BRUSH” SPOT FOR METER DECALS $0.96 A BS200-MCP 0.65” GREEN “MULTI-COLOR FOAM PROTECTANT” SPOT FOR METER DECALS $0.96 A BS513 1 ¾” x 2 1/8” “DOLLARS ONLY” DECAL FOR METER BOXES $3.65 A BS514 1 ¾” x 2 1/8” “QUARTERS OR DOLLARS” DECAL FOR METER BOXES $3.65 A BS515 1 ¾” x 2 1/8” “TOKENS OR DOLLARS” LEXAN DECAL FOR METER BOXES $3.65 A BS516 1 ¾” x 2 1/8” “TOKEN / QUARTER / DOLLAR” LEXAN DECAL FOR METER BOXES $3.65 A BS517 7 ½” x 11 ½” LEXAN “EXTRA TIME” SIGN FOR MOUNTING IN BAY $18.83 A BS518 1 ¾” x 2 1/8” “TOKEN ONLY” LEXAN DECAL FOR METER BOXES $3.65 A BS519 2” x 3” “X-TRA TIME” DECAL FOR METER BOX $3.65 A BS520 3” x 3” “LAST COIN ALERT” DECAL FOR METER BOX $3.65 A BS521 1 ¾” x 2 1/8” “QUARTERS ONLY” LEXAN DECAL FOR METER BOXES $3.65 A BS522 1 ¾” x 2 1/8” “TOKEN & QUARTERS” LEXAN DECAL FOR METER BOXES $3.65 A BS523-ABD 7/8” BLUE “AIR BLOW DRY” SPOT FOR METER DECALS $0.96 A BS523-WS 7/8” ORANGE “WASH/SOAP” SPOT FOR METER DECALS $0.96 A BS523-RN 7/8” WHITE “RINSE” SPOT FOR METER DECALS $0.96 A BS523-HW 7/8” GREEN “HIGH PRESSURE WAX” SPOT FOR METER DECALS $0.96 A BS523-CCP 7/8” GREEN “CLEAR COAT PROTECTANT” SPOT FOR METER DECALS $0.96 A BS523-FW 7/8” GREEN “LOW PRESSURE FOAM WAX” SPOT FOR METER DECALS $0.96 A BS523-OFF 7/8” RED “OFF” SPOT FOR METER DECALS $0.96 A BS523-STP 7/8” RED “STOP” SPOT FOR METER DECALS $0.96 A BS523-ET 7/8” YELLOW “ENGINE/TIRE CLEANER” SPOT FOR METER DECALS $0.96 A BS523-EC 7/8” YELLOW “ENGINE CLEANER” SPOT FOR METER DECALS $0.96 A BS523-TC 7/8” YELLOW “TIRE CLEANER” SPOT FOR METER DECALS $0.96 A BS523-FB 7/8” BLUE “FOAM BRUSH” SPOT FOR METER DECALS $0.96 A BS523-PS 7/8” PINK “PRESOAK” SPOT FOR METER DECALS $0.96 A BS523-SFR 7/8” ROSEMAN RED “SPOT FREE RINSE” SPOT FOR METER DECALS $0.96 A BS523-BNK 7/8” DARK BLUE BLANK FOR METER DECALS $0.96 A BS523-MCB 7/8” BLUE “MULTI-COLOR FOAM BRUSH” SPOT FOR METER DECALS $0.96 A BS523-MCP 7/8” GREEN “MULTI-COLOR FOAM PROTECTANT” SPOT FOR METER DECALS $0.96 A BS524 7/8” “LAST COIN ALERT” INSERT FOR DEC100 OR DEC150 DECAL $0.96 A BS525 7/8” CIRCULAR INSERT FOR DEC100 “TOKENS OR QUARTERS” $0.96 A BS526 7/8” CIRCULAR INSERT FOR DEC100 “TOKENS ONLY” $0.96 A BS530 SET OF 5 PRICE SPOTS FOR MB199-14 & MB199-14L $2.77 A BS532 SET OF 6 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS $7.40 A
METER BOX PRICE SPOTS
BS532-050 2 1/8” “50¢” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-075 2 1/8” “75¢” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-100 2 1/8” “$1.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-125 2 1/8” “$1.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-150 2 1/8” “$1.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-175 2 1/8” “$1.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-200 2 1/8” “$2.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-225 2 1/8” “$2.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-250 2 1/8” “$2.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-275 2 1/8” “$2.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-200 2 1/8” “$2.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-225 2 1/8” “$2.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-250 2 1/8” “$2.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-275 2 1/8” “$2.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-300 2 1/8” “$3.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A
Page 24
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
METER BOX PRICE SPOTS
BS532-325 2 1/8” “$3.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-350 2 1/8” “$3.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-375 2 1/8” “$3.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-400 2 1/8” “$4.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-425 2 1/8” “$4.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-450 2 1/8” “$4.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-475 2 1/8” “$4.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A BS532-500 2 1/8” “$5.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 A
STAINLESS STEEL LIGHTED MENU FRAMES
MS302 STAINLESS STEEL SELECTIVE LIGHTED FRAME FOR 8 POSITION ROTARY SWITCH W/ CAM LOCK $C/F B AND REMOVABLE DOOR (USE WITH MS100 OR MS100-W) 8 INDIVIDUAL 24VAC LIGHTS TO ILLUMINATE EACH SPOT WHEN CUSTOMER TURNS THE ROTARY SWITCH MS302-8HGP REPLACEMENT LIGHTED PANEL FOR MS302 LIGHTED 8 POSITION MENU FRAME $C/F B MS302-10 STAINLESS STEEL SELECTIVE LIGHTED FRAME FOR 10 POSITION ROTARY SWITCH W/CAM LOCK $C/F B AND REMOVABLE DOOR (USE WITH MS150 OR MS150-W) 10 INDIVIDUAL 24VAC LIGHTS TO ILLUMINATE EACH SPOT WHEN CUSTOMER TURNS THE ROTARY SWITCH MS302-10HGP REPLACEMENT LIGHTED PANEL FOR MS302-10 LIGHTED 10 POSITION MENU FRAME $C/F B MS302-O “OLIVATOR”™ LED LIGHTED INSERT FOR THE MS302 LIGHTED MENU SIGN.THE LED’S LIGHT OUT $132.62 B FROM THE CENTER TO EACH FUNCTION THAT IS ON, DRAWING ATTENTION TO EACH FUNCTION SELECTED. THE BRIGHT LED’S WILL ENHANCE THE APPEARANCE OF YOUR BAY. EASILY CAN BE RETROFIT ABLE TO THE MS302 STAINLESS SIGN. STAINLESS STEEL MENU FRAME
MS400-R1 STAINLESS STEEL FRAME (24”W x 36”H) FOR MENU SIGN (2 PARTS WITH TABS) DESIGNED TO $73.30 B ACCEPT BOTH THE MS100B-W AND MS100-10W MENU SIGNS MOUNTING TABS ON OUTSIDE MS400-R2 STAINLESS STEEL FRAME (24”W x 36”H) FOR MENU SIGN (2 PARTS WITH TABS) DESIGNED TO $73.30 B ACCEPT BOTH THE MS100B-W AND MS100-10W MENU SIGNS MOUNTING TABS ON INSIDE MS400-T REPLACEMENT TOP FOR MS400-R1 & MS400-R2 $55.62 B LEXAN ® BAY MENU SIGNS 8 AND 10 POSITION
MS100B-W 8 POSITION BAY MENU SIGN WITH WARNING INSERT FOR WINDOW – SIZE 23.5” W x 35.5”H. $64.31 D SPOTS (MS200) USES 8 CIRCULAR SPOTS SAME COLORED SAME AS METER DECALS (BS523) WITH LAMINATED INSTRUCTION SPOTS WHICH ARE ADHESIVE TO BACK OF MENU SIGN. CAN BE MOUNTED INSIDE MS302 LIGHTED FRAME OR MS400 STAINLESS STEEL FRAME. MS100B 8 POSITION BAY MENU SIGN HAS WINDOW TO VIEW BIG TIME (BT800B OR BT902). CAN BE $60.65 D MOUNTED INSIDE MS302 LIGHTED FRAME. SAME AS MS100W EXCEPT FOR WINDOW. MS100-W10 10 POSITION BAY MENU SIGN WITH WARNING INSERT FOR WINDOW – SIZE 23.5”W x 35.5”H- $78.00 D USES 10 CIRCULAR SPOTS (MS200) COLORED SAME AS METER DECALS (DECPS200) WITH LAMINATED INSTRUCTION SPOTS WHICH ARE ADHESIVE TO BACK OF MENU SIGN. CAN BE MOUNTED INSIDE MS302-10 LIGHTED FRAME OR MS400 FRAME. MS100-10 10 POSITION BAY MENU SIGN HAS WINDOW TO VIEW BIG TIME (BT800B OR BT902). CAN BE $74.78 D MOUNTED INSIDE MS302-10 LIGHTED FRAME. SAME AS MS100-W10 EXCEPT FOR WINDOW. INSTRUCTION SPOTS FOR MS100B, MS100B-W, MS100-10 & MS100-10W
MS200-ABD BLUE “AIR BLOW DRY ” INSTRUCTION SPOT $2.82 E MS200-WS ORANGE “WASH/SOAP” INSTRUCTION SPOT $2.82 E MS200-RN WHITE “RINSE” INSTRUCTION SPOT $2.82 E
Page 25
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
INSTRUCTION SPOTS FOR MS100B, MS100B-W, MS100-10 & MS100-10W
MS200-HW GREEN “HIGH PRESSURE WAX” INSTRUCTION SPOT $2.82 E MS200-LFW GREEN “LOW PRESSURE FOAM WAX” INSTRUCTION SPOT $2.82 E MS200-CCP GREEN “CLEAR COAT PROTECTANT” SPOT $2.82 E MS200-OFF RED “OFF” INSTRUCTION SPOT $2.82 E MS200-STP RED “STOP” INSTRUCTION SPOT $2.82 E MS200-ET YELLOW “ENGINE/TIRE CLEANER” INSTRUCTION SPOT $2.82 E MS200-EC YELLOW “ENGINE CLEANER” INSTRUCTION SPOT $2.82 E MS200-TC YELLOW “TIRE CLEANER” INSTRUCTION SPOT $2.82 E MS200-FB BLUE “FOAM BRUSH” INSTRUCTION SPOT $2.82 E MS200-PS PINK “PRESOAK” INSTRUCTION SPOT $2.82 E MS200-SFR ROSEMAN RED “SPOT FREE RINSE” INSTRUCTION SPOT $2.82 E MS200-BNK BLUE BLANK INSTRUCTION SPOT $2.82 E
SPECIAL INSTRUCTION SPOTS FOR MS100B, MS100B-W, MS100-10 & MS100-10W MS201-EC GREEN “ENGINE CLEANER” INSTRUCTION SPOT $2.82 E MS201-FW YELLOW “FOAM WAX” INSTRUCTION SPOT $2.82 E MS201-FB ORANGE “FOAM BRUSH” INSTRUCTION SPOT $2.82 E MS201-WS PINK “WASH/SOAP” INSTRUCTION SPOT $2.82 E MS201-FLW YELLOW “FOAMING LEMON WAX” INSTRUCTION SPOT $2.82 E MS201-RG WHITE “RINSE AND GO” INSTRUCTION SPOT $2.82 E MS201-TB GREEN “TIRE BRUSH” INSTRUCTION SPOT $2.82 E MS201-PS BLUE “PRESOAK” INSTRUCTION SPOT $2.82 E MS201-HFW RED “HIGH PRESSURE FOAM WAX” INSTRUCTION SPOT $2.82 E MS201-MCB BLUE “MULTI-COLOR FOAM BRUSH” INSTRUCTION SPOT $2.82 E MS201-MCP GREEN “MULTI-COLOR FOAM COAT PROTECTANT” SPOT $2.82 E
SPECIAL INSTRUCTION SPOTS ENGLISH & SPANISH FOR MS100B, MS100B-W, MS100-10 & MS100-10W MS202-WS ENGLISH & SPANISH ORANGE “WASH/SOAP” INSTRUCTION SPOT $3.54 E MS202-RN ENGLISH & SPANISH WHITE “RINSE” INSTRUCTION SPOT $3.54 E MS202-HW ENGLISH & SPANISH GREEN “HIGH PRESSURE WAX” INSTRUCTION SPOT $3.54 E MS202-CCP ENGLISH & SPANISH GREEN “CLEAR COAT PROTECTANT” INSTRUCTION SPOT $3.54 E MS202-MCP ENGLISH & SPANISH GREEN “MULTI COLOR FOAM PROTECTANT” INSTRUCTION SPOT $3.54 E MS202-OFF ENGLISH & SPANISH RED “OFF” INSTRUCTION SPOT $3.54 E MS202-ET ENGLISH & SPANISH YELLOW “ENGINE/TIRE CLEANER” INSTRUCTION SPOT $3.54 E MS202-EC ENGLISH & SPANISH YELLOW “ENGINE CLEANER” INSTRUCTION SPOT $3.54 E MS202-TC ENGLISH & SPANISH YELLOW “TIRE CLEANER” INSTRUCTION SPOT $3.54 E MS202-FB ENGLISH & SPANISH BLUE “FOAM BRUSH” INSTRUCTION SPOT $3.54 E MS202-PS ENGLISH & SPANISH PINK “PRESOAK” INSTRUCTION SPOT $3.54 E MS202-SFR ENGLISH & SPANISH ROSEMAN RED “SPOT FREE RINSE” INSTRUCTION SPOT $3.54 E
ACCESSORIES FOR FRAMES AND SIGNS MS310 REPLACEMENT LAMP FOR MS302 LIGHTED FRAME $1.65 A MS312 LAMP SOCKET FOR MS302 LIGHTED FRAME $7.22 A MS315 CUSTOM NAME STRIPS 2 COLOR FOR MS 100 $C/F A (250 PIECE MINIMUM ORDER PLUS ONE TIME ART/PLATE CHARGE OF $125.00) MS316 BLANK NAME STRIP FOR MS 100 $2.85 E MS526 DECAL WARNING INSERT FOR MS 100 $4.90 E
Page 26
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
REMOTE CONTROL
RC800 REMOTE CONTROL TO FIELD CHANGE THE SCROLLING MESSAGES IN IDX DISPLAYS, DISPLAY $156.85 B TIMERS OR MESSAGE CENTERS. YOU CAN ALTER CYCLE TIME, ALTER COINS TO START, CHECK AND CLEAR COIN COUNT, SET TIME FOR LAST MINUTE ALERT, AND FIELD CHANGE 3 PERSONALIZED MESSAGES TOTALING 108 CHARACTERS. **FOR ALL IDX DISPLAY TIMERS.** BT54 COILED CORE FOR RC800 $16.66 C
**NEW **SMART SELECTOR SWITCH** PS300 PermaSwitch™ PS300 10 POSITION ELECTRONIC SELECTOR SWITCH INTERCHANGEABLE WITH MOST 8 OR $378.00 B 10 POSITION MECHANICAL ROTARY WITH MINIMUM MODIFICATION. POSITIVE PUMP ON WITH NO DELAY BETWEEN HIGH PRESSURE CYCLES, PROGRAMABLE 10 MIN. WASHDOWN CYCLE WASH DOWN 2.5AMP LOAD PER EACH RELAY OUTPUT, REMOTE MOUNTED OUTPUT MODULE, MAKES FOR SIMPLE INFIELD MOUNTING AND WIRING. INCREASES LIFE OF TIMERS, DANCING LED’s DRAWS ATTENTION & HIGHLIGHTS THE SERVICES SELECTED, INTERNAL BEEPER ALERTS USER OF THEIR SELECTED SERVICE. U.S. PATENT # 5,371,681 ACCESSORIES FOR PS200 & PS300 PS200-10 TOUCH PAD ASSEMBLY FOR PS200 & PS300 READY TO MOUNT ON DOOR, COMPLETE WITH DECALS $99.95 B SHOCK ABSORBING GASKET, BACK PLATE WITH GASKET AND MOUNTING HARDWARE. PS200-CB INTERCONNECTING BOARD FOR PS200 ONLY $47.17 B PS200-R PermaSwitch BACK HALF ONLY INCLUDES NYLON STUDS AND THUMB SCREWS $298.00 B PS200WIRHRNS REPLACEMENT WIRING HARNESS FOR PS200 /PS300 PermaSwitch $23.08 B
DECPS200 MULTI-COLORED PermaSwitch PS200 DECAL WITH SERVICE SPOTS $21.97 A MA72-P RELAY OUTPUT MODULE FOR PS200 FOR 3RD STACK $33.50 C PSNYSTANDOFF NYLON STAND OFF TO ATTACH PS200-R TO DOOR. $1.54 B
HS8709 STAINLESS STEEL THUMB SCREW TO ATTACHED PS200-R TO STANDOFF $6.46 B PS300-PRB PS300 CONTROL BOX INCLUDES RELAYS, INTERCONNECT WIRING AND WIRING HARNESS $315.00 B PS300-CBX PS300 INTERFACE MODULE PETWEEN PS200-10 AND PS300-PRB $59.96 B
COIN COUNTER & COIN COUNTER INTERFACE MODULE IB100 TO CONVERT 24VAC WASH CYCLE COUNTERS TO COUNT COINS NOT CYCLES – 24 / 120VAC INPUT $58.34 C CC623 COIN COUNTER DIGITAL NON RESETABLE WITH MUILT VOLTAGE INPUT. 18AC/DC TO 120ACDC. PLUGS $158.00 B DIRECTLY INTO INDUSTRIAL 8 PIN BASE SOLD SEPERATLY DS508 DS508 INDUSTRIAL 8 PIN BASE $5.83 A MULTI FUNCTION LOW VOLTAGE TIMERS U.S. PATENT 5,371,681
AT300 DESIGNED TO BE A DIRECT REPLACEMENT FOR THE SPECIALTY MANUFACTURE “TIME MACHINE $129.95 E TIMER” AND OTHERS WITH THE SAME FOOT PRINT. THE AT300 HAS ENHANCED FEATURES LIKE A 5 AMP RELAY OUTPUT, WIDE RANGE OF INPUT VOLTAGES FROM 12 VAC/VDC TO 28VAC & 40VDC LAST ALERT AND COIN IN BEEP OUTPUT- 256 COIN ACCUMULATION, 1 TO 15 COINS TO START OPTIONAL PLUG IN DISPLAY PART# AT300DB-3S7 PLUS MORE. AT300-2 SAME FEATURES AS AT300 WITH THE TWO TIME OPTION FOR COMBO VACUUMS, AIR/WATER $164.65 E MACHINES OR FOR SPECIALS CAN USE 2 PLUG IN DISPLAYS P[ART # AT300DB-3S7 AT300- THIS MODEL HAS 4 SEPARATE 5 AMP OUTPUTS WITH 1 COIN INPUT GREAT TO REDUCE COSTS $199.95 E
QUAD ON A VACUUM ISLAND OR OTHER PROJECTS AT300DB-3S7 3- SEVEN SEGMENT PLUG IN DISPLAY FOR AT300 $129.95 E AT300DB-3S7/2 2ND DISPLAY OPTION WHEN USING THE AT300-2 OR ON AT300-QUAD $129.95 E LC526-AC/DC LAST ALERT HORN MULTI VOLTAGES 9-40 AC / DC WITH “L” BRACKET RED & BLACK WIRES $41.67 C
Page 27
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
PLUG IN TIMERS INDUSTRIAL GRADE U.S. PATENT #4,976,346
AT401D ***OBSOLETE*** AT402 ***OBSOLETE***
AT402
ACCESSORY MODULES FOR PLUG IN TIMERS
LC LAST ALERT HORN MULTI VOLTAGES 9-34 AC / DC 2 YEAR WARRANTY $41.67 C LC521-DC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) D/C TYPE USE WITH AT402-L, AT403-L $80.00 C LC525-DC LAST COIN ALERT. SAME AS LC521-DC NO PLUG-IN HOUSING (24 VAC) $41.67 C DS508 8 PIN SOCKET ( CAN BE DIN RAIL MOUNTED) $5.83 C DS511 11 PIN SOCKET ( CAN BE DIN RAIL MOUNTED) $7.25 A DS513 DIN RAIL (SPECIFY LENGTH IN INCHES) C/F C CC623 DIGITAL COIN COUNTER AC/DC 18-130 VOLTS $158.00 B
FLAT PACK TIMERS INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN)
AF411 ***OBSOLETE*** AT411E ACCUMULATING TIMER- COIN INPUT ONLY, INPUT & OUTPUT VOLTAGE 115VAC OR 24VAC $97.95 C 2- 25 AMP SCR OUTPUTS MOUNTED ON ALUMINUM HEAT SINK SIZE 5.375” L x 3.563” W x 1.75” H AT411E-1 NON-ACCUMULATING TIMER (FOR USE IN COIN VAC SYSTEMS, TO INHIBIT BILL CHANGER FROM $119.58 C DISPENSING ONLY A SET AMOUNT OF COINS WITH A TIME DELAY BETWEEN SET AMOUNTS) AT411E-1D NON-ACCUMULATING TIMER REMOTE RESET, 1 PULSE TO START, WITH TIME MULTIPLIER $119.58 C SWITCHING ( 2x, 4x, or 8x ), 2 SECONDS UP TO 68 MINUTES AT411E-N1 NON-ACCUMULATING TIMER NON RESETTABLE (FOR USE IN COIN VAC SYSTEMS, REPLACE OLD $119.58 C SLIDE & TURN KNOB TIMERS) AT411E-NR ACCUMULATING TIMER USE WITH AN EXTERNAL RESET (FOR USE IN RUG BETTER ) $119.58 C AT411E-NR1S NON-ACCUMULATING TIMER REMOTE RESETTABLE FOR USE IN WK-NAG-ASGARD CONTROL $119.58 C SYSTEM. EXTENDED RUN TIME FROM ONE COIN PULSE OF 2 SECONDS TO 2.28 HOURS
Page 28
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
FLAT PACK TIMERS INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN)
AT412 ACCUMULATING TIMER-COIN INPUT ONLY, INPUT & OUTPUT VOLTAGE 220VAC OR 24VAC (USE ONLY $115.95 C W/ 220VAC WITH ONE SIDE GROUNDED) SIZE 5.375” L x 3.563” W x 1.75” H AT412-N1 NON-ACCUMULATING TIMER NON RESETTABLE $137.58 C AT412-NR1S NON-ACCUMULATING TIMER REMOTE RESETTABLE $137.58 C FLAT PACK TIMERS WITH 24VAC POWER TO RUN A COIN ACCEPTOR INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN)
AT413 ACCUMULATING TIMER – 24VAC COIN ACCEPTOR OUTPUT, 115VAC INPUT AND OUTPUT VOLTAGE- $132.00 C (2) 25AMP SCR OUTPUTS - 256 COIN ACCUMULATION, AUTOMATIC RESETTABLE FUSE ON 24VAC TERMINAL TO PROTECT COIN ACCEPTOR. SIZE 5.375” L x 3.563” W x 1.75” H AT414 ACCUMULATING TIMER – 24VAC COIN ACCEPTOR OUTPUT, 220VAC INPUT & OUTPUT VOLTAGE- $147.00 C (2) 25AMP SCR OUTPUTS – SAME OPERATING SPERCFICATIONS AS THE AT413
NON DISPLAY DUAL TIME TWO TIMER INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN)
AT422 DUAL ACCUMULATING TIMER. TWO TIME SWITCHES & TWO COIN TO START SWITCHES, AND A $132.95 C CONTROL INPUT LINE TO SWITCH BETWEEN TWO TIME & VALUE SETTINGS AT ANY GIVEN INSTANT. INPUT & OUTPUT VOLTAGE 120VAC OR 24VAC SIZE 5.375” L x 3.563” W x 1.75” H AT424 DUAL ACCUMULATING TIMER. 220VAC OR 24VAC TWO TIME SAME SPECIFICATIONS AS THE AT422 $147.95 C
OPTIONS FOR FLAT PACK TIMERS THESE OPTIONS ARE FACTORY INSTALLED & CANNOT BE FIELD INSTALLED. (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER) -L AUXILIARY OUTPUT ALERT OPTION (USE WITH MODEL LC521A/C OR SL560). AUXILIARY OUTPUT $15.00 C WILL COME ON FOR LAST 32 SEC. OF TIME. FOR USE ON AT411E, AT412, AT413, AT422 & AT424. (AUXILIARY OUTPUT VOLTAGE MUST BE THE SAME AS THE LOAD VOLTAGE) -X X-TRA TIME OPTION – EXTENDS A 20 SECOND PERIOD AFTER SERVICE TIME EXPIRES, ALLOWING $15.00 C CUSTOMERS TO DEPOSIT ADDITIONAL COINS FOR EXTENDED SERVICE. PULSING OUTPUT FOR INDICATOR LIGHT OR HORN DURING EXTENSION PERIOD. FOR AT411E, AT412, AT413, AT422 & AT424.
ACCESSORY MODULES FOR AT411, AT412, AT413, AT422, AT424 TIMERS LC520-AC LAST COIN ALERT CONTINUOUS TONE AC HORN 12- 32VAC $33.34 C LC521-AC LAST COIN ALERT PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE FOR 12-32 VAC ONLY $80.00 C LC525-AC SAME AS LC521-AC W/NO PLUG-IN HOUSING AND “L” BRACKET FOR MOUNTING $41.67 C CB400-L A DEVICE THAT CAN BE FIELD INSTALLED BY CONNECTING 4 WIRES TO COIN “XEPTOR”. WILL BEEP EVERY $74.95 C TIME YOUR CUSTOMER PUTS A COIN INTO YOUR ACCEPTOR & BEEP FOR LAST ALERT (USE WITH DS511 SOCKET & WIRES) 24/120VAC INPUT IB100 TO CONVERT 24VAC WASH CYCLE COUNTERS TO COUNT COINS NOT CYCLES 24V/120 INPUT $58.34 C
DIGITAL DISPLAYS USED WITH EXTERNAL TIMERS U.S. PATENT 5,371,681
BT800B ***DISCONTINUED*** REPLACED BY BT900 BT802B ***DISCONTINUED*** REPLACED BY BT900-2 BT810B ***DISCONTINUED*** REPLACED BY DD810-M
BT900 BIG TIME CONVERTS MOST 24VAC TIMER TO A DISPLAY TIMER WITH 2” SCROLLING LETTERS CASE $349.15 D SIZE 10”W x 7.1”H x 3”D DISPLAY WILL FLASH FOR LAST MINUTE OF TIME CHANGEABLE SCROLLING MESSAGE OF 29 CHARACTERS. SWITCH SETTABLE FOR X-TRA TIME MESSAGE VIEWED AT END OF CYCLE
Page 29
MODEL NUMBER DESCRIPTION MSRP DISC.
CODE
DIGITAL DISPLAYS USED WITH EXTERNAL TIMERS U.S. PATENT 5,371,681
BT900-E BIG TIME DISPLAY MOUNTED IN BT8B STAINLESS STEEL LOW PROFILE CASE WITH CAM LOCK $411.80 D LOW PROFILE CASE SIZE 12”D x 7.35”H x 2.5”L BT900-2 BIG TIME WILL TRACK MODEL AT422 OR LTT802 W/2 DIFFERENT SERVICES OR 2 DIFFERENT COINS TO START $372.22 D TIMES PER COIN. CAN BE SWITCHED BACK & FORTH RE-CALCULATE THE REMAINING TIME ON THE UNUSED AMOUNT OF MONEY SWITCHING FROM SERVICE TIME A TO B OR SERVICE TIME B TO A. WELCOME INTRO MESSAGE OF 72 CHARACTERS & EXIT MESSAGE OF 36 CHARACTERS. CASE SIZE 10”Wx7.1”Hx3”D BTC900 BIG TIME DISPLAY WITH COUNT UP FEATURE USED WITH SOME CREDIT CARD SYSTEM TO INFORM $374.74 D CUSTOMER OF TIME BEING USED MOUNTED IN THE BT15 POLY CARBON CASE BTC900-E THE BTC900 MOUNTED IN THE LOW PROFILE S/S CASE HORN NOT INCLUDED $411.80 D DD810-M DIGITAL DISPLAY FOR AUTOMATIC BLOWERS WITH HIGH OUTPUT LED’S. WELCOME INTRO MESSAGE $369.22 D OF 72 CHARACTERS, 36 CHARACTERS INTERRUPT MESSAGE (EXP: “MOVE UP SLOWLY”).HALF-WAY DEDICATED MESSAGE (EXP: “YOU SHOULD BE HALF WAY THROUGH”) DD810 DIGITAL DISPLAY FOR AUTOMATIC BLOWERS WITH LOW PROFILE STAINLESS STEEL CASE. $493.14 D LTT800 LITTLE DIGITAL DISPLAY FOR MOUNTING IN METER BOXES OR VACUUMS. CONVERTS MOST TIMERS TO $319.58 C A DISPLAY TIMER.
JUMBO MESSAGE CENTERS
BS820 ULTRA BRIGHT JUMBO MESSAGE CENTER- MOUNTED IN LOW PROFILE STAINLESS STEEL CASE W/ LEXAN® $997.95 C WINDOW. LARGE ULTRA BRIGHT RED LED DISPLAY (22.25”W x 7.35”H 2.5”D) W/ FEATURES OF IDX’S BT912 BIG TIME TWO TIMER - ADDITIONAL FEATURES. STANDARD ULTRA HIGH BRIGHT RED LEDS FOR USE IN DIRECT SUN LIGHT, 9 PROGRAMMABLE 30 CHARACTER MESSAGES, WELCOME MESSAGE – 64 CHARACTER EACH MESSAGE DISPLAYS WHEN AN INPUT SEES 24VAC. EACH MESSAGE WILL SCROLL ONE AFTER THE OTHER AS LONG AS POWER IS APPLIED TO THAT INPUT. POWER REQUIREMENTS 24 VAC AT 1AMP - INPUTS 24 VAC BS820-A ULTRA BRIGHT JUMBO MESSAGE CENTER- FOR AUTOMATICS SAME SPECS AS BS820 WITH ONE EXCEPTION. $997.95 C THE BS820-A WILL DISCONTINUE SCROLLING THE MESSAGE AS SOON AS POWER HAS BEEN REMOVED.
SPECIALTY DISPLAY TIMERS “CARD- DISPLAY PROTOCOL” STANDARD
LTT802FRAGA REPLACED BY GT 200-A BT912FRAGRA REPLACEMENT SPECIAL BIG TIME TWO TIMER FOR FRAGRAMATICS COMBO *** INCLUDES $686.97 C WIRING HARNESS AND MOUNTING STUDS*** CASE SIZE 10”Wx7.1”Hx3”D BT907 SPECIAL BIG TIME WITH 7 DIFFERENT TIMES THAT IS USED BY DOYLE VACUUM, IVS, J.E. ADAMS $631.86 D LTT802RYKO REPLACEMENT SPECIAL LITTLE TWO TIMER FOR RYKO MANUFACTURING $536.49 C BT912 IVS REPLACEMENT BIG TIME FOR IVS / GINSAN COMBO VACUUMS **CASE SIZE 10”Wx7.1”Hx3”D $650.43 C BT912 D&S REPLACEMENT BIG TIME FOR D&S COMBO VACUUMS & METERS **CASE SIZE 10”Wx7.1”Hx3”D $650.43 C BT912PREMEIR SPECIAL CONFIGUARTION FOR PREIMER DRYING CORP $650.43 C BTC907DOYLE-U SPECIAL BIG TIME WITH 7 DIFFERENT TIMERS ULTRA BRIGHT LED’S AND COUNT UP PROGRAM $869.67 C INCLUDES LCR25-AC HORN & REMOTE BOX USED BY DOYLE VACUUM CO BTC912DOYLE-U SPECIAL BIG TIME TWO TIMER WITH ULTRA BRIGHT LED’S AND COUNT UP PROGRAM, ALERT $693.22 C HORN LCR25-AC AND REMOTE BOX USED BY DOYLE VACUUM CO
DIGITAL DRYER TIMER
DD910 DRYER TIMER WITH DIGITAL COUNTDOWN DISPLAY FOR AUTOMATIC BLOWERS WITH HIGH OUTPUT LEDS, $602.95 D LOW PROFILE STAINLESS STEEL CASE– 2.5”D x 7.35”H x 12”W. REMOTE RESET TABLE, DISABLE COIN ACCEPTOR, 5 AMP RELAY OUTPUT, SUNLIGHT VISIBLE LEDS, PROGRAMMABLE WELCOME MESSAGE OF 72 CHARACTERS, INTERRUPT MESSAGE (EXP: “MOVE UP SLOWLY”). HALF-WAY DEDICATED MESSAGE (EXP: “YOU SHOULD BE HALF WAY THROUGH”) DD910-U DRYER TIMER W/DIGITAL COUNTDOWN DISPLAY ULTRA BRIGHT LED’S $802.95 D DD910-M DRYER TIMER W/DIGITAL COUNTDOWN DISPLAY IN BT15 POLY CARBON ENCLOSURE $553.31 D
Page 30
MODEL NUMBER DESCRIPTION MSRP DISC.
CODE
OPTIONS FOR MODEL BT900, BT900-2, DD810-M, DD810, & DD910 THESE OPTIONS ARE FACTORY INSTALLED AND CANNOT BE FIELD INSTALLED. (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER)
-B BURGLAR ALARM HAS VISUAL ALERT, MUST HAVE LC525-AC FOR AUDIBLE ALERT. INCLUDES $33.50 D IMPACT SWITCH. -D DISABLE COIN ACCEPTOR FOR OUT OF SERVICE CONDITIONS $33.50 D -U RED ULTRA BRIGHT LED’s FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT900, BT912, $183.71 D BT907, DD810, & DD910. ACCESSORY MODULES FOR BT900, BT900-2, DD810, GT200 & LTT900 LC LAST ALERT LOW POWER CONSUMPTION MULTI VOLTAGE 9 – 34 AC/DC 2-YEAR WARRANTY $41.67 C LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE (24VAC) USE WITH AC TIMERS, $80.00 C WITH LAST ALERT AND EXTRA TIME OPTIONS DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 A LC525-AC SAME AS LC521-AC NO PLUG IN HOUSING (24VAC) $41.67 C REPLACEMENT CIRCUIT BOARDS FOR BIG TIMES DISPLAYS & TIMERS U.S. PATENT 5,371,681.
P800B ***ALL BT800 SERIES OF DISPLAYS OBSOLETE REPLACED BY PART #P900-***
P900- PRINTED CIRCUIT BOARD FOR BT800B & BT900 / BT900-E $311.33 D P900-2 PRINTED CIRCUIT FOR BT802B & BT900-2B $386.33 D PC900 PRINTED CIRCUIT FOR BTC800B & BTC900 COUNT UP DISPLAY WITH HORN OUTPUT $311.33 D PD810 PRINTED CIRCUIT FOR BT810B DRYER DISPLAY $308.33 D PD810-UR PRINTED CIRCUIT FOR BT810B DRYER DISPLAY WITH RED ULTRA BRITE LED $546.10 D P820 PRINTED CIRCUIT FOR BS820 JUMBO MESSAGE CENTER SIGN $760.14 D P820-A PRINTED CIRCUIT FOR BS820-A JUMBO SIGN FOR AUTOMATICS $760.14 D
P902- ***ALL BT902 DISPLAY TIMERE OBSOLETE REPLACED BY PART # P912-***
P912-BHS PRINTED CIRCUIT FOR BT902FRAGRA SPECIAL $527.18 D P907-HS PRINTED CIRCUIT FOR BT907 BIG TIME SEVEN TIMERS $565.49 D P907-HSU PRINTED CIRCUIT FOR BT907 BIG TIME SEVEN TIMERS WITH ULTRA BRIGHT RED LEDS $765.49 D PD910- PRINTED CIRCUIT FOR DD910 DRYER TIMER DISPLAY $416.83 D PD910-UR PRINTED CIRCUIT FOR DD910 DRYER TIMER DISPLAY WITH ULTRA BRITE LED $616.83 D P912- PRINTED CIRCUIT FOR BT912 BIG TIME TWO TIMERS WITH RELAY OUTPUT $429.50 D P912-D PRINTED CIRCUIT FOR BT912-D BIG TIME WITH DISABLE FEATURE $466.00 D P912-LUCKY PRINTED CIRCUIT FOR BT912-LUCKY TIME BIG TIME TWO TIMERS WITH RELAY OUTPUT $493.68 D P912-T PRINTED CIRCUIT FOR BT912 LATCH TIME TWO TIMERS WITH RESET CIRCUIT $527.18 D P912-BHS PRINTED CIRCUIT FOR BT912 TWO TIMERS SET UP FOR FRAGRA $527.18 D P912-UR PRINTED CIRCUIT FOR BT912 BIG TIME TWO TIMERS WITH RELAY OUTPUT $632.50 D P922- PRINTED CIRCUIT FOR BT912 JUMBO TIME TWO TIMERS INCLUDES ULTRA BRIGHT RED LEDS $760.14 D
BT8 STAINLESS STEEL COVER SLIDE OVER WITH MOUNTING TABS SIZE 10.25”W x 7.25”H x 3.75”D $82.85 B BT8B STAINLESS STEEL ENCLOSURE WITH HINGED DOOR & CAM LOCK FOR BT912, DD810, DD910. $195.00 B SIZE 12”W x 7.35”H x 2.5”D BT8H STAINLESS STEEL COVER SLIDE OVER WITH HINGED FRONT COVER FASTEN BACK OF BT8H TO WALL $131.88 B COVER HINGE WILL OPEN. LOCK WITH 3 OF YOUR TAMPER PROOF SCREWS. SIZE 10.25”W x 7.25”H x 4.31”D BT8E STAINLESS STEEL ENCLOSURE (ONLY 2” DISPLAY SHOWS) WITH CAM LOCK AND REMOVABLE SERVICE $172.31 B DOOR. OVERALL SIZE 12”W x 10”H x 3.75”D BT8ED STAINLESS STEEL DOOR FOR BT8E ENCLOSURE $86.16 B BT8ES STAINLESS STEEL ENCLOSURE FOR BT8E ENCLOSURE $109.66 B BT9 STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT922 $205.39 B SIZE 22.25”W x 7.35”H x 2.5”D DIGITAL BIG TIME CLOCK TIMERS U.S. PATENT 5,371,681. BT900 SERIES DUAL CLOCK TIMERS FOR WALL MOUNTING
BT912-M BIG TIME™ TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING HAS ALL THE CONVENIENCES OF THE $473.40 D GIGIA TIME TIMER & THE BIG TIME DISPLAY AND COMBINES THEM INTO ONE UNIT, BT912. STANDARD FEATURES INCLUDE HIGH OUTPUT LEDs, LAST MIN. ALERT, TWO TIMER, X-TRA TIME, & BONUS TIME. 3 CHANGEABLE MESSAGES VIA RS-232 PORT (CHANGEABLE 72 CHARACTER INTRO, 36 CHARACTER EXIT MESSAGE); CONTROL INPUT LINE TO SWITCH FROM TIMER A OR TIMER B. (EXP: SET DIFFERENT START + CYCLE TIME – DAYLIGHT & DARK / SET DIFFERENT TIMES PER COIN FOR TIRE CLEANER THAN RINSE. CASE SIZE 10”W x7.1”H x 3”D INCLUDES HORN OUTPUT (–H OPTION) HORN SOLD SEPERATLY
BT902E ****REPLACED BY PART #BT912*** BT902 ****REPLACED BY PART #BT912-M***
BT912 BIG TIME TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING INCLUDES LOW PROFILE STAINLESS $617.00 D STEEL CASE. HAS ALL THE SAME FEATURES OF THE BT902-H BIG TIME TWO TIMER PLUS THE ADDED FEATURE OF A 5AMP RELAY OUTPUT AND LAST MIN., ALERT HORN MOUNTED. “LATCH TIME “(–T) OPTION CAN BE ADDED. SIZE 12”W x 7.35”H x 2.5”D BTC912 BIG TIME TWO TIMER WITH COUNT UP CHIP MOUNTED IN LOW PROFILE STAINLESS STEEL CASE $652.29 D BT907 SPECIAL BIG TIME WITH 7 DIFFERENT TIMES THAT IS USED BY DOYLE VACUUM, IVS, J.E. ADAMS USED IN $632.86 D COMBO VAC, MOUNTED IN THE BT13 ENCLOSURE, HORN- MODEL #LC525-AC MOUNTED, EACH OF THE 7 SERVICES CAN HAVE DIFFERENT START TIMES AND PRICING. DISPLAY SCROLLS EACH MESSAGE AS SERVICE IS SELECTED AND DISPLAYS AMOUNT FOR SERVICE. COULD ALSO BE INSTALLED AS A BAY TIMER. CASE SIZE 10”W x 7.1”H x 3”D BT907-U SAME AS BT907 BUT INCLUDED THE ULTRA BRIGHT RED LED’S. CASE SIZE 10”Wx7.1”Hx3”D $829.89 D
OPTIONS FOR MODEL BT900 SERIES
THESE OPTIONS ARE FACTORY INSTALLED AND CANNOT BE FIELD INSTALLED. (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER)
-B BURGLAR ALARM HAS VISUAL ALERT. INCLUDES SWITCH $33.50 D -D DISABLE COIN “XEPTOR” OPTION (Reads visually “Out of Service”, plus turns off COIN “XEPTOR”.) $33.50 D -P (INCLUDED IN BT912) OUTPUT IS SHORT-CIRCUITING PROTECTED. $16.66 D -T LATCH TIME / WASH AS LONG AS YOU WANT **BT912 ONLY** INCLUDES –D OPTION $92.00 D -U RED ULTRA BRIGHT LEDS FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT912 $183.71 D ACCESSORY MODULES FOR BIG TIME & JUMBO TIME LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE (24VAC) USE WITH AC TIMERS, $80.00 C WITH LAST ALERT AND EXTRA TIME OPTIONS DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 A
Page 32
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
ACCESSORY MODULES FOR BIG TIME & JUMBO TIME
LC525-AC SAME AS LC521-AC NO PLUG IN HOUSING (24VAC) $41.67 C BT/LTT- CREDIT CARD PROGRAM CHIP AND EEPROM –(“CARD DISPLAY PROTOCOL™) $119.00 E CDPROGRAM BT/LTT-LUCKY LUCKY TIME CHIP AND EEPROM INCLUDES CREDIT ( “CARD DISPLAY PROTOCOL™) $119.00 E BT10 OBSOLETE NO REPLACEMENT AVAILABLE BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C BT12-922 RED ACRYLIC LENS FOR BT9 STAINLESS STEEL ENCLOSURE $15.95 C BT32-S SPECIAL PROGRAM PROCESSOR CHIP $106.33 C
ULTRA BRIGHT **BT922** JUMBO TWO TIMER™ U.S. PATENT #5,371,681
BT922 ULTRA BRIGHT JUMBO TWO TIMER- MOUNTED IN A STAINLESS STEEL CASE W/ LEXAN® WINDOW. LARGE $997.95 C ULTRA BRIGHT RED LED DISPLAY AREA (2” HIGH x 16” LONG) WITH ALL THE SAME GREAT FEATURES OF IDX’S BT912 BIG TIME TWO TIMER PLUS ADDITIONAL FEATURES. STANDARD FEATURES ARE THE ULTRA HIGH BRIGHT RED LEDS FOR DIRECT SUNLIGHT, OUTPUT CAN SWITCH OUT MULTI-PULL VOLTAGES 5 TO 24VAC/VDC OR 115VAC – 5AMP SINGLE POLE RELAY OUT PUT, HORN OUTPUT & LC525-AC HORN MOUNTED. SAME OPTIONS AS BT912- (-B) BURGLAR ALARM, (-D) DISABLE COIN “XEPTOR”. THE BT922 SCROLLS THE SERVICE THAT IS IN USE EVERY 10 SEC. WHILE COUNTING DOWN SIZE 22.25” W x 7.35” H x 2.5” D REMOTES FOR IDX DISPLAY AND DISPLAY TIMERS
RC800 REMOTE CONTROL TO FIELD CHANGE YOUR SCROLLING MESSAGE IN THE BT800-R, BT800B, BT802B, $156.85 B BT810B, BT902, BT912, BT922, LTT802, LTT800 & GT1200 FOR ADVERTISING. IT CAN ALSO CHANGE CYCLE TIMES, COINS TO START, CLEAR COIN COUNTS, SET TIME FOR LAST MIN. ALERT AND FIELD CHANGE 3 PERSONALIZED MESSAGES TOTALING 108 CHARACTERS. ACCESSORY PARTS FOR BIG TIME, LITTLE TWO TIMER & GIGA TIMER
BTFRAGRAWIRING WIRING HARNESS FOR BT912FRAGRA TO CONVERT FROM BT902FRAGRA $33.60 A BT IVS WIRING WIRING HARNESS FOR BT902IVS & BT912IVS $33.60 A BT IVS7 WIRING WIRING HARNESS FOR BT907IVS $39.95 A BT/LTT- CREDIT CARD PROGRAM CHIP AND EEPROM –(“CARD DISPLAY PROTOCOL™) $119.00 E CDPROGRAM BT/LTT-LUCKY LUCKY TIME CHIP AND EEPROM INCLUDES CREDIT( “CARD DISPLAY PROTOCOL™) $119.00 E BT10 OBSOLETE NO REPLACEMENT AVAILABLE BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C BT12-922 RED ACRYLIC LENS FOR BT9 STAINLESS STEEL ENCLOSURE $15.95 C BT13 OBSOLETE REPLACED BY BT15
Page 33
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
ACCESSORY PARTS FOR BIG TIME, LITTLE TWO TIMER & GIGA TIMER
BT10 ***BT800A-BT902 FRONT COVER DISCONTINUED*** BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C BT13 ***DISCOUNTED*** REPLACED BY WITH BT15 BT13B WHITE BOX ONLY (LESS COVER) FOR BT800B OR BT902 $74.91 B BT15 ENCLOSURE FOR BT800 (COMPLETE W/COVER & BOTTOM) (DECAL-NOT INCLUDED) $98.50 B CASE SIZE 10”W x 7.1”H x 3”D BT15-FC NEW FRONT COVER FOR BT15 ENCLOSURE USED W/BT800, BT902 (DECAL-NOT INCLUDED) $48.95 B BT15-H GRAY BOX ONLY (LESS COVER) FOR BT15 ENCLOSURE - BT800B, BT902, BT912-M, DD910-M $74.91 B BT20 EEPROM WITH MESSAGE PLUG IN $25.00 E BT31 PROCESSOR CHIP FOR BT800-R FOR 72 CHARACTER MESSAGE $106.33 E BT32 PROCESSOR CHIP FOR BT902 / BT912 $106.33 E BT32-S SPECIAL MODIFIED PROGRAM PROCESSOR CHIP $106.33 E BT33 REMOTE JACK (BROWN BOX ONLY) $8.25 C BT39-B DECAL FOR FRAGRAMATIC $15.64 C BT40 DECAL FOR BT800B, HD800B, BT802B, BT810B (PLACE ON BT10) $10.51 C BT40-B DECAL FOR BT900 (PLACE ON BT13) BT912, BT907 $15.64 C BT51 HIGH OUTPUT LED SEGMENT $21.67 C BT51-UR RED ULTRA BRIGHT LED $40.00 C BT52 REMOTE JACK AND CABLE FOR RS-232 (BT902) $16.66 C BT53 REMOTE JACK AND CABLE FOR BT800A WITH FORK CONNECTORS $16.66 C BT54 COILED CORD FOR THE RC800 $16.66 C BT60 LARGE 6 PIN PLUG WITH 4 CONTACT ***SPECIAL ENDS FOR RC800 COILED CORDS $0.54 B BT62 HAND CRIMPING TOOL FOR COILED CORDS $27.27 A MA70-V ISOLATED 24VAC POWER SUPPLY & DISABLE RELAY MODULE FOR BILL ACCEPTORS WHEN TIED $33.50 C TO VENDER TIMER LTT10 RED ACRYLIC LENS FOR FACE OF LTT800 & LTT802 $4.95 C LTT11 LTT HOUSING COMPLETE – RED LEXAN $10.00 C LTT11-FC LTT FRONT COVER WITH 4 POSTS- RED LEXAN $6.66 C LTT11-H LTT HOUSING LESS FRONT COVER – RED LEXAN $8.33 C LTT20 EEPROM WITH MESSAGE PLUG IN $25.00 E LTT30 PROCESSOR CHIP FOR LTT800 & LTT802 $106.33 E MB199-23 KEY SWITCH TO KEEP UP WITH WASH DOWN TIME $74.99 A LTT41-P1 WIRING HARNESS FOR P-1 HOOK UP ON LTT SERIES $15.31 B LTT41-P3 WIRING HARNESS FOR P-3 DISABLE ON LTT SERIES $15.31 B GT41-P3 WIRING HARNESS FOR GT 200-A SERVICE PLUG $16.85 B LTT51 HIGH OUTPUT LED SEGMENT FOR LTT800 & LTT802 $21.67 C
STAINLESS STEEL COVERS FOR BT800B, BT802B, BT810B, BT902, IN BT13 ENCLOSURE & BT922
BT8 STAINLESS STEEL COVER SLIDE OVER WITH MOUNTING TABS SIZE 10.25”W x 7.25”H x 3.25”D $82.85 B BT8B STAINLESS STEEL ENCLOSURE W/ RED LENS, HINGED DOOR & CAM LOCK FOR BT800B-E, BT912, $195.00 B DD810B, & DD910 SIZE 12” W x 7.35” H x 2.5” D BT8H STAINLESS STEEL COVER, SLIDE OVER w/ HINGED FRONT COVER. FASTEN BACK OF BT8H TO $131.88 B WALL. COVER HINGE WILL OPEN. LOCK WITH 3 OF YOUR TAMPER PROOF SCREWS. SIZE 10.25”W x 7.25”H x 3.25”D BT8E STAINLESS STEEL ENCLOSURE (ONLY 2” DISPLAY SHOWS) W/CAM LOCK & REMOVABLE SERVICE $172.31 B DOOR. OVERALL SIZE 12”W x 10”H x 3.75”D BT8ED STAINLESS STEEL DOOR FOR BT8E ENCLOSURE $86.16 B BT8ES STAINLESS STEEL ENCLOSURE FOR BT8E ENCLOSURE $109.66 B BT9 STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT922 & BS820 $205.39 B SIZE 22.25” W x 7.35” H x 2.5” D LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR & CAM LOCK SIZE- 6”H x 5.563” W x 5” D $100.00 B
Page 34
MODEL NUMBER DESCRIPTION MSRP
DISC. CODE
LITTLE TWO TIMER DIGITAL CLOCK TIMERS FOR METER BOXES “CARD DISPLAY PROTOCOL™” STANDARD, U.S. PATENT #5,371,681
LTT802-??? ****DISCONTINUED*** REPLACED BY PART #GT 200 LTT802-LUCKY ***DISCONTINUED*** REPLACED BY PART #GT 200 & GT 200-A
Giga Time™ TIMERS FOR METERS & VACUUMS U.S. PATENT #5,371,681
ULTIMATE IN MULTI TIME DISPLAY TIMERS FOR METERS OR VACUUMS
GT 200 THE NEW GIGA TIMER GT200 IS A COMPACT DIRECT FIELD REPLACEMENT MULTI-FEATURE DISPLAY TIMER $299.96 E WHICH HAS MANY FEATURES INCLUDING INDUSTRY STANDARD METER BOX FOOT PRINT, MULTI-VALUE TIMING WITH COUNT-DOWN OR COUNT UP MODE, IDX “Card- Display protocol” AND IDX PATENTED TWO TIME SELECT FEATURE. THIS NEW MODEL EXHIBIT UP TO 20% REDUCTION IN POWER CONSUMPTION OVER THE LTT802 SERIES AND CARRIES A 2-YEAR WARRANTY ON STANDARD HIGH OUTPUT LEDS. OPTIONAL 3-YEAR WARRANTY ON ULTRA BRITE LEDS - ALL WITH 3 BRIGHTNESS SETTINGS THAT ARE FIELD PROGRAMMABLE. 3 FIELD PROGRAMMABLE MESSAGES HAVE BEEN EXPANDED TO 127 CHARACTERS EACH. STANDARD OPERATING VOLTAGE IS 24VAC WITH A 3 AMP RELAY OUTPUT AND OPTIONAL VOLTAGES 12VDC / 12VAC / 24VDC /34VDC ARE AVAILABLE UP ON REQUEST. SIZE 3.35”W x 3.80”H x 3.15”D GT 200-A THE NEW GIGA TIMER GT200 W/ OPTION BOARD WILL ENABLE AND RESET “LATCH TIME/GIGA TIME) INCLUDES $374.96 E 10 MULTI TIME FUNCTIONS W/SERVICES MESSAGES, AUDIT FEATURES SEPARATE COIN, BILL, & CREDIT CARD AMOUNTS ALONG WITH TOTAL TIME AND SERVICE TIMES. REPLACEMENT FOR THE LTT802FRAGRA GT 200-NP THIS MODLE IS USED WITH THE GT200 M-BOX AND GT200MSB PUSH BUTTON BOARD THIS INTERFACE ALLOWS $399.96 E THE TIMER TO DISPLAY SERVICE MESSAGES( 77 CHARTERS EACH ) FOR UP TO 12 SEPARATE PUSH BUTTONS AND 11 SEPARATE TIMING EVENTS FOR PROMOTIONS GT-1200 GIGA TIME IS THE ULTIMATE IN MULTI TIME TIMER TECHNOLOGY. SUPER ULTRA BRIGHT RED LEDS, 1”H x 5.5”W $594.24 E DISPLAY OPENING EASIER TO READ SCROLLING LETTERS BECAUSE OF THE DUAL ROW LED LETTERING, 4 STANDARD SETTINGS FOR TIME AND/OR COINS ON 4 DIFFERENT SERVICE INPUTS, 2 SERVICE MESSAGES, OPTIONAL TIME/COIN PROGRAMMING SETTINGS, 12 PROGRAMMABLE SERVICES 30 CHARACTER SERVICES LIKE “WASH / RINSE / TRIPLE FOAM / etc”, GIGA TIME – ALSO CALLED “LATCH TIME, BONUS TIME, UNLIMITED TIME, MEGA TIME” IS A PROGRAMABLE MESSAGE, “LUCKY TIME™” PROGRAM, COIN IN BEEP, PROGRAMMABLE LENGTH ON LAST COIN ALERT FROM 1 SECOND TO THE FULL LAST “CARD DISPLAY protocol”™, 1 COIN AND/OR TOKEN INPUT, 1 BILL INPUT, SEPARATE RETRIEVABLE COUNTS, HORN OUTPUT, OPTIONS: LUCKY TIME ACTIVATION BUTTON, LATCH TIME RESET CIRCUIT FOR LOOP OR EYE ( NOT PROVIDED) SIZE 3.125”H x 5.875”W X 1.78”D. ACCESSORY MODULES FOR GIGA TIMER GT1200 & GT200
LC521-AC LAST MINUTE ALERT PLUG-IN TYPE, USES DS508 SOCKET (A/C TYPE FOR 24VAC ONLY) $80.00 C DS508 PLUG IN BASE FOR LC521-AC HORN $5.83 A LC525-AC SAME AS LC521-AC W/ NO PLUG-IN HOUSING. INCLUDES “L” BRACKET FOR MOUNTING. $41.67 C
LAST COIN / LAST MINUTE ALERT
LC521-DC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) D/C TYPE (24VAC) USE WITH AT401D-L, AT402-L & AT403-L $80.00 C LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) A/C TYPE (24VAC) USE WITH AT411E-L, $80.00 C AT412-L, BT800B-H, BT802B-H, BT902-H, BT912, BT922 AND LTT802-H. LC525-AC LAST COIN ALERT SAME AS LC521-AC WITH NO PLUG IN HOUSING (24VAC) $41.67 C LC526-AC/DC LAST ALERT MULTI VOLTAGE 9-28VAC OR 40VDC RED & BLACK WIRES $41.67 C LC525-DC LAST COIN ALERT SAME AS LC521-DC WITH NO PLUG IN HOUSING (24VAC) $41.67 C DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 A
Page 35
MODEL NUMBER
DESCRIPTION MSRP DISC. CODE
ZOLAR™
THE ULTIMATE IN FREEZE CONTROLS Z440-24 ZOLAR IS THE ULTIMATE IN ANTIFREEZE CONTROL SYSTEMS. UP TO 4 DIFFERENT FIELD PROGRAMMABLE 3AMP $556.72 B RELAY OUTPUTS WHICH CAN SWITCH OUT DIFFERENT VOLTAGES – 24VAC, 115VAC OR 220VAC TO CONTROL DEVICES LIKE N/O OR N/C VALVES, LIGHT CONTACTORS, FLOOR HEATERS, TURN OFF AUTOMATIC. TURN ON EQUIPMENT ROOM HEATER OR AIR CONDITIONER. VALVES CAN BE SET FOR STEADY ON AND/OR CYCLING. AUTO DIALER OUTPUT CAN BE SET IF AN ALARM CONDITION OCCURS OR IF THERE IS A POWER FAILURE. FIELD PROGRAMMABLE VIA 4 SIMPLE BUTTONS OR RC800 HAND HELD REMOTE. DIGITAL DISPLAY WILL SHOW CURRENT TEMPERATURE, DAYS POWERED, DAYS BELOW FREEZING & MORE, THERE ARE 6 STATUS INDICATOR LED, ZOLAR ALSO CAN CONTROL UP TO 10-LOW PRESSURE / FOAM BLOWER MODULE (Z-FB880) TO KEEP YOUR BRUSHES AND/OR TRI COLOR. FOAMING PRODUCTS FROM FREEZING STANDARD 1 50’ TEMPERATURE SENSOR AND UP TO 3 ADDITIONAL TEMPERATURE SENSOR & OR AMBIENT LIGHT PROBES (Z-440LP) POLY CARBONATE CASE SIZE 10”W x 7.1”H x 3”D WITH MOUNTING TABS Z-FB880 FOAM BLOWER MODULE Z-FB880 IS FIELD PROGRAMMABLE TO BLOW OUT UP TO 8 SEPARATE VALVES EACH $179.92 B AFTER A SIGNAL IS RECEIVED FROM ZOLAR. FOAM BLOWER WILL NOW WAIT UNTIL ONE OF THE INPUTS IS ACTIVATED FOR 10 SECONDS, WHICH WILL ARM THE UNIT. ONCE POWER HAS BEEN REMOVED THE UNIT WILL WAIT 10 SECONDS TO SEE IF POWER IS REAPPLIED BEFORE STARTING THE BLOW DOWN CYCLE FOR THAT ONE INPUT. SIZE 7.5 W” x 3.375 H” x 1.375” D WITH MOUNTING TABS
ACCESSORIES FOR ZOLAR
Z440LP-50 AMBIENT LIGHT SENSOR TO CONTROL OUTSIDE OR INSIDE LIGHTS WITH 50’ CABLE $39.67 B Z440TP-50 TABLATURE SENSOR PROBE WITH 50’ SHIELDED CABLE $39.67 B Z-07S ISOLATE INPUTS FOR FOAM BLOWER $33.50 C
BLOW DOWN TIMER AF411 ***OBSOLETE*** MODULES TO CONTROL LOW PRESSURE DELIVER SYSTEMS & REPLACE BLADDER TANKS MX8 24VAC MULTIPLEXED CONTROL – 2 SEC ON & OFF DELAY. MONITOR 8 INPUTS FROM BAY LOCATION TO $109.95 C TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT IS 24VAC OR 120VAC. SIZE 5.375” L x 3.563” W x 2.375” H MX9 24VAC MULTIPLEXED CONTROL – NO TIME DELAY. MONITOR 8 INPUTS FROM BAY LOCATION TO TIRE $109.95 C CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT IS 24VAC OR 120VAC. SIZE 5.375” L x 3.563” W x 2.375” H MX10 24 VAC MULTIPLEXED CONTROL – 1 SEC ON & OFF DELAY. MONITOR 8 INPUTS FROM BAY LOCATION TO $109.95 C TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT POWER IS 24VAC OR 120VAC. SIZE 5.375” L x 3.563” W x 2.375” H
Page 36
MODEL NUMBER
DESCRIPTION MSRP
DISC. CODE
MULTI FOAM BRUSH OR PROTECTANT MULTIPLEX CYCLER
MX48 MULTIPLEX CONTROLLER WITH 8 INPUTS & 4 OUTPUTS TO REPLACE THE COSTLY PLC’S AND / OR MULTI $378.00 D RELAY SETUPS USED FOR THE MULTICOLOR LOW PRESSURE WAX & BRUSH SYSTEMS. MX48 HAS 1 CONSTANT OUTPUT AND 3 SEPARATE TIMED OUTPUTS CONTROLLED BY 1 SWITCH W/ 5mSec. OVER LAP. SAME FOOT PRINT AND ELECTRICAL SPECIFICATION AS THE MX8. WHEN MORE THAN 8 INPUTS ARE NEEDED; USE THE MX9 TO ADD UP TO 7 ADDITIONAL INPUTS. SIZE 5.375” L x 3.563” W x 2.375” H INLINE ON & OFF DELAYS
MX1 THIS CONTROL ELIMINATES THE HIGH PRESSURE MOTOR STARTER FROM PICKING UP & DROPPING OUT $58.34 C AS SOMEONE TURNS THE ROTARY SWITCH FROM ONE OF SERVICE TO THE NEXT. (W/1 SEC DELAY.) SAVES ON THE ELECTRIC BILLS, INCREASES PUMP & CHECK VALVE LIFE. SIZE 2.875” T x 2.375” W x 1.563” H MX2 SAME AS MX1 WITH 2 SEC DELAY $58.34 C MX3 SAME AS MX1 WITH 2 SEC ON & .3 SEC OFF $58.34 C IO MODULES GT 20 MUX “IO” MODULE WITH 20 INPUTS & 22 RELAY OUTPUTS THAT CAN BE USED FOR EXSPANDED PUSH BUTTON $398.00 E METER BOX TO OFFER PREMIUN SERVISES OR INDUSLTRIAL APLICATIONS WITH SERIAL INPUTS AND OUTPUTS GT-I/O-10 “IO” MODULE USED IN COMBO VAC TO ADD PUSH BUTTONS WITH 10 INPUTS & 12 OUTPUTS SPECIAL $378.00 E FIRMWARE OR FOR INDUSLTRIAL APLICATIONS WITH SERIAL INPUTS AND OUTPUTS IO-1206 “IO” MODULE HAS 6 PAIR OF INPUTS AND EACH INPUT PAIR HAS 2 OUTPUTS TIED TO THEM, GREAT FOR CONTROLING $375.00 E THE SAME CHEMICAL WITH 2 DIFFERENT PRESURES SUCH AS HIGH AND MEDIUM PRESURE WAX OR PRESOAK ETC SK8844-M IO MODULE WITH 8 DIGITAL INPUTS & OUTPUTS PLUS 4 ANALOGUE INPUTS AND OUTS. MASTER UNIT WILL $695.00 A COMUNICATE WITH THE SLAVE MODLE # SK-8844-S TO EXSPAND IN PUTS & OUTPUTS AND REMOTE UPDATES SK8844-S IO ADD-ON MODULE WITH 8 DIGITAL INPUTS & OUTPUTS PLUS 4 ANALOGUE INPUTS AND OUTS $645.00 A FUSES
MENGT-5A FUSE 5 AMP FOR GT 200 $1.49 A MEN5 FUSE 5 AMP FOR TRA183 $4.14 A MEN15 FUSE 15 AMP 13/32” x 1-1/2” $5.37 A TRANSFORMERS & POWER SUPPLIES
TRA-5VDC 5 VOLT DC 2AMP POWER SUPPLY FOR WR88 PM $31.48 A TRA-9VDC 9 VOLT DC POWER SUPPLY FOR IR800 $8.28 A TRA-12VDC 12 VOLT DC 500MA POWER SUPPLY USED WITH WICKET NIGHT ACCESS $24.95 A TRA-12VDC 1A 12 VOLT DC 1AMP POWER SUPPLY USED WITH Edge CREDIT CARD READER BY USA TECH $31.48 A TRA24-6 115VAC TO 24VAC: 40 VA OUTPUT TRANSFORMER $19.95 A TRA183 115/208/230 VOLT TO 24VAC: 100 VA TRANSFORMER, FUSED OUTPUT ENCAPSULATED FOR DAMP $65.30 A ENVIRONMENTS. PS-TRA100A24 POWER SUPPLY FOR WICKET KIOSK 90-220 X 24VDC 100W $209.00 A
PSU2412-15-AD 24VAC TO 12VDC 1.5 AMPS POWER CONVERTER FOR BILL ACCEPTOR ONLY $34.29 A PSU-WTRAM-VAL 24VAC TO 12VDC 5AMPS POWER CONVERTER FOR BILL ACCEPTOR AND WTRAM $53.83 A ELECTRICAL ACCESSORIES
HM10 HOUR METER 24VAC $55.84 D DPDT RELAY (SPECIFY COIL VOLTAGE) $18.46 D DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 C DS511 11 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $7.25 C
Page 37
MODEL NUMBER
DESCRIPTION MSRP
DISC. CODE
CONTACT MODULE
CP-CT CURRENT TRANSFORMER DRY CONTACT – FIELD ADJUSTABLE $66.67 A MA70 DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® TO INCREASE COIN PULSE SIGNAL $33.50 C MA70-S ISOLATE 2 DIFFERENT COIN PULSES FROM 2 BAYS OR VAC'S WHEN CONNECTED W/VAC UP $33.50 C SYSTEM SIZE 1.938”L x 1.313”W x .75”D MA70-V ISOLATED 24VAC POWER SUPPLY & DISABLE RELAY MODULE FOR BILL ACCEPTORS WHEN TIED $33.50 C TO VENDER TIMER SIZE 1.938”L x 1.313”W x .75”D MA71 DUAL DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® USED W/ 2 WIRE COIN COUNTERS $33.50 C MA72 QUAD DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® DUAL MA71 $67.00 C SIZE 1.938”L x 1.313”W x 1.5”D MA72-P RELAY OUTPUT MODULE FOR PS200 TO ADD 3RD STACK OPTION ON ONE SERVICE $33.50 C SIZE 1.938”L x 1.313”W x .75”D
CONTACT MODULE
MA73 DUAL DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® DUAL MA74 $67.00 C SIZE 1.938” L x 1.313” W x 1.5” D MA74 QUAD DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® USED TO ISOLATE DIFFERENT $33.50 C TYPES OF COIN SIGNALS OR POWER OUTPUTS SIZE 1.938”L x 1.313”W x .75”D MA75 OUTPUT MODULE FOR ACW TO CPU $277.79 C MA76 LATCH TIME MODULE 24VAC USED TO DISABLE OR ENABLE LATCH TIMER MODELS BT912-T, $58.33 C LTT802-T, AND GT1200 WHEN USING GIGA TIMER OPTION SIZE 1.938”L x 1.313”W x .75”D MA76DC-12 12VDC RELAY MODULE N/O $33.50 C MA76DCN/024 LATCH TIME MODULE 24VDC USED TO DISABLE OR ENABLE LATCH TIME $58.33 C MA77 COIN PULSE INTERFACE FROM A POWER( 24VAC) SOURCE TO A COMMON PULSE $33.50 C MA79 POWER RELAY USED W/CREDIT CARD SYSTEM - SWITCH OUT POWER FOR COUNT UP SYSTEMS $33.50 C OR FOR INHIBIT CIRCUIT IN AUTOMATICS MA-VEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 1 PER SHELF REQUIRED SIZE 1.938”L x 1.313”W x .75”D MA-VEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 1 PER SHELF REQUIRED SIZE 1.938”L x 1.313”W x .75”D DEMOS METER BOX / JUMBO SIGN
SD101 METER BOX DEMO FOR DISPLAY ON DISTRIBUTOR COUNTER $1,895.85 B COMPLETE DEMO READY TO PLUG INTO 120VAC MB155 “BIG BOX”, DEC155, WITH GT 200 GIGA TIMER, LC525-AC,X10, ASSORTED X-MARK”® TOKENS, PUSH BUTTON SWITCH FOR COIN PULSES, IRM800, & IR800 REMOTE. PS300 PermaSwitch PS300® 10 POSITION ELECTRONIC SWITCH $378.00 B LIGHTED FRAME DEMO SD100 MENU SIGN INSIDE OF LIGHTED FRAME FOR DISPLAY ON DISTRIBUTOR COUNTER. COMPLETE $1,383.20 B DEMO READY TO PLUG INTO 120VAC, WITH 10 POSITION ROTARY SWITCH, BT912- BHP BIG TIME, MS100-10 MENU WITH REMOTE, LAST COIN ALERT, & PUSH BUTTON TO SIMULATE COIN INPUT. JUMBO TIME DEMO SD102 JUMBO TIME TWO TIMER DEMO BT922 COMPLETE WITH 120VAC TRANSFORMER, POWER CORD, $1,383.20 C 10 POTION ROTARY SWITCH, & PUSH BUTTON
Page 38
X-MARK® or SMART-MARK® METAL CODED TOKENS FOR MODEL X10 & X12 “XEPTORSâ
PRICING ON NORMALLY STOCKED SINGLE METAL X-MARK TOKENS
Custom Tokens minimum order per token new or reorder -10,000, 25,000 or 50,000+ call for pricing
** One time Die and Art work charge on all new custom token orders is $800.00. **
TERMS FOR CUSTOM- 50% DOWN PLUS $800.00 ART WORK & DIE CHARGES- BALANCE PRIOR TO SHIPPING
Due to the volatility of the metal market, Custom Quoted Token pricing is only good for 30 days.
The advanced technology of the IDX X10 series of Xeptors and the X-Mark or Smart-Mark site-specific tokens is the only token system that eliminates cross play (acceptance of other companies, or competitors tokens) in the car wash industry. This is achieved because of IDX’S patented technology and only IDX can guarantee that we will never sell a duplicate dedicated token that has been assigned to you within 100 to 150 miles of your establishment. The X10 Xeptor is the only token acceptor that does not allow cross play when programmed with the assigned X-Mark or Smart-Mark site-specific token and rejects all other non-coded pieces of metal out there disguised as a token. IDX monitors the placement of each X-Mark & Smart-Mark site-specific token code for each company location and matches it with the correct model of X10 Xeptor. Other manufactures of coin acceptors and tokens cannot match this guarantee. TO ORDER X-MARK OR SMART-MARK CODED TOKENS **ORDER BY SIZE, METAL & CODE SET** NEW CODES WILL BE ASSIGNED BY ZIP CODE TO AVOID DUPLICATION OF CODE IN SAME AREA
**PLEASE HAVE NAME OF CAR WASH, CITY, STATE, & ZIP CODE WHEN ORDERING**
X-MARK® or SMART-MARK® METAL CODED TOKENS
FOR MODEL X10 & X12 “XEPTORSâ
Page 39
COMMON METAL CONTENT FOUND IN USE IN CAR WASH & ARCADE TOKENS
752 18% 65% 17% X 0.986 / 1.073 x 0.067” STAINLESS STEEL X 0.900 / 0.984” x 0.067” REEDED
TSA 1.9% 73.7% 24.4% X 0.986 / 1.073 / 1.125” x 0.055” TSA 1.9% 73.7% 24.4% X 0.986” x 0.080” **REEDED TSA6 6% 70% 24% X 0.900/ 0.986/1.073” x 0.055” **REEDED TSA6 6% 70% 24% X 0.900 / 0.986 / 1.073/ 1.125” x 0.067”
TSA6 6% 70% 24% X 0.986 & 1.073” x 0.080”** REEDED TSA9 9% 70% 21% X 0.1073” X 0.067”
BI- METAL TSA / EDGE METAL – 752 / CENTER METAL X 0.984 / 1.073”
TO ORDER X-MARK OR SMART-MARK CODED TOKENS **ORDER BY SIZE, METAL, & CODE SET** NEW CODES WILL BE ASSIGNED BY ZIP CODE TO AVOID DUPLICATION OF CODE IN SAME AREA
**PLEASE HAVE NAME OF CAR WASH, CITY, STATE, & ZIP CODE WHEN ORDERING**
INDIVIDUALIZE YOUR X-MARK STOCK TOKENS
ADD A CUSTOMIZED MYLAR FOIL IMAGE OF 1 TO 3 COLORS WITH A SILVER BACK GROUND. OR ADD ONE OF THE STOCK AMERICAN FLAG 4 COLOR IMAGES ON MYLAR OR A HOLOGRAM
IMAGE OF A SOARING EAGLE WITH THE AMERICAN FLAG IN ITS BACKGROUND QUANTITY 100-500 600-1000 1000+ THC-IDX EAGLE 4 COLOR 15MM SOARING EAGLE ON AMERICAN FLAG $0.45 $0.41 $0.37
EACH TOKEN WILL HAVE THE X-MARK OR SMART-MARK CODE ON BOTH SIDES OF THE TOKEN AND THE MYLAR OR HOLOGRAM ONLY ON ONE SIDE
THE MYLAR AND HOLOGRAM X-MARK TOKEN SIZES: 15mm IMAGE ” 0.900”/ 0.986” / 1.073”/ 1.125” TOKEN
CUSTOM 1 COLOR 15mm MYLAR FOIL IMAGES FOR X-MARK OR SMART-MARK TOKENS $0.21 EACH AT 6,000 IMAGES ONLY
CUSTOM 2 COLOR 15mm MYLAR FOIL IMAGES FOR X-MARK OR SMART-MARK TOKENS $0.29 EACH AT 6,000 IMAGES ONLY
CONSULT IDX FOR LARGER QUANTITY PRICING
CUSTOM 2 COLOR 15mm MYLAR FOIL IMAGES MINIMUM ORDER IS 6,000 PIECES ONE TIME CUSTOM
ART-WORK & DIE CHARGE IS $350.00. MINIMUM REORDERS ARE 6,000 PIECES. DELIVERY ON CUSTOM MYLAR IMAGES AFTER APPROVED ARTWORK, EXPECT LEAD-TIMES TO BE 3 TO 4 WEEKS
**TERMS FOR CUSTOM - 50% DOWN PLUS ART WORK & DIE CHARGES- BALANCE PRIOR TO SHIPPING**
Page 40
OEM CROSS REFERENCE REPLACEMENT PARTS 5/18/2018
**NEW** XEPTORS for AUTO ENTRY Mfg. American Changer Exact One ( EXACTA )
X12CB5AC34A – standard X12SR39C34F - standard X12CB39C34A - optional X12SR5AC34F - optional
Hamilton Mfg. Innovative Controls ACW 1//2/3 X12CM5AC34F – standard X12CH5AC34A - standard X12CM39C34F – optional
X12CH39C34A - optional ACW4 Standard Change Makers X12CZ5AC34A - standard X12CM5AC34F – standard X12CZ39C40A - optional X12CM39C34F – optional X12DM5AC36R – standard GOLDLINE X12DM39C36R - optional
X12SG5AC34A – standard X12SG39C34A – optional Unitec Electronics HTK WASH SELECT II
X12CM5AC34A – standard X12DM5AC34R – standard X12CM39C34A – optional X12DM39C34R – optional
PORTAL MA850SM0C34F – standard
**NEW** XEPTORS for EQUIPMENT Mfg.
***OPTIONAL -- MOST IDX XEPTOR WILL REPLACE VACUUM MFG STANDARD***
D & S Mfg. Doyle Mfg.
X12R5AC34F – standard MA850CR0C34F – standard X12SR39C34F – optional X12CR5AC34F – optional MA850SR0C34F – optional X12CR39C34F – optional
IVS / GinSan Fragramatic MA850CR0C34F – standard MA850CF0C34F – standard **IVS OLD STYLE ROUND VACUUM** *OLD STYLE FRAGRANCE & COMBO VACUUM* MA850CR0C34C MA850CF0C34C X12CR5A0C34F – optional X12CF5A0C34F – optional X12CR390C34F – optional X12CF390C34F – optional J.E.Adams Jim Coleman
MA850CR0C34F – standard MA850CR0C34C – standard X12CR5A0C30F – optional X12CR5A0C34C – optional
X12CR390C30F – optional X12CR390C34C – optional
Ryko Mfg. National Pride MA85CCR0C34F - standard MA850SR0C34F- standard
X12CR5A0C34F – optional X12CR390C34F – optional CCSI International pet washes
X12CR6AC34F – standard Etowah Valley Premier Touchless Drying X20-F / X22-F OEM unit X12CR5AC34F – standard Replacement model / MA850CR0C34F
Page 41
** NEW ** XEPTORS for DROP SHELF VENDOR Mfg.
D & S Mfg. Laurel Metals X12SR5AC34F – standard MA850CL00C34A – standard X12SR39C34F – optional X12CL5AC34A – optional MA850SR0C34F – optional X12CL39C34A – optional
NON- DISPLAY TIMERS for VACUUM Mfg.
D & S Mfg. Doyle Mfg. AT411EL-D&S – standard AT411E - standard Replacement AT411E-L AT412 – 220VAC AT422 - 2 timer IVS / GinSan Fragramatic AT411E – standard AT411E – standard
AT412 – 220VAC **NEW AT422 - 2 timer
J.E.Adams Jim Coleman AT411E – standard AT411E – standard
AT412 – 220VAC AT414 220VAC - with AT422 - 2 timer 24vac out power for Coin Acceptor
Ryko Mfg. Premier Touchless Drying AT412 AT411E-L AT422-L
DISPLAY TIMERS for VACUUM Mfg.
D & S Mfg. Doyle Mfg. BT912D&S – standard Giga Timer-1200 - standard Replacement board P912-D BTC907DOYLE-U - standard
LTT802-HP - optional / Replaced by GT200 Replacement Board PC907-HSU GT1200 - optional BTC912DOYLE-U – standard Replacement Board PC912-U IVS / GinSan Fragramatic BT912-IVS – standard BT902FRAGRA– Replaced by BT912FRAGRA
Replacement board P912-D Replacement board - P912-BHS BT907-IVS – standard LTT802FRAGRA – Replaced by GT 200-A Replacement board P907-HS LTT802-FH -optional / Replaced by GT200 RYKO Mfg. LTT802RYKO - standard
J.E.Adams LTT802-FH – optional / Replaced by GT200 Premier Touchless Drying
